diff options
| author | Philippe Schenker <philippe.schenker@toradex.com> | 2019-10-17 14:14:38 +0000 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-11-04 17:37:54 +0100 |
| commit | 2b30efe2e88a398224abf9751a3fe1018375826f (patch) | |
| tree | ac4ed804eee790959d070434e4ff776315ab22d3 /drivers/tty | |
| parent | c2a552197106b45d0d801d5b8a6be47563a700df (diff) | |
tty: serial: lpuart: Remove unnecessary code from set_mctrl
Currently flow control is not working due to lpuart32_set_mctrl that is
clearing TXCTSE bit in all cases. This bit gets earlier setup by
lpuart32_set_termios.
As I read in Documentation set_mctrl is also not meant for hardware
flow control rather than gpio setting and clearing a RTS signal.
Therefore I guess it is safe to remove the whole code in
lpuart32_set_mctrl.
This was tested with console on a i.MX8QXP SoC.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Link: https://lore.kernel.org/r/20191017141428.10330-1-philippe.schenker@toradex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 11 |
1 files changed, 0 insertions, 11 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 537896c4d887..f3271857621c 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1333,18 +1333,7 @@ static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) { - unsigned long temp; - - temp = lpuart32_read(port, UARTMODIR) & - ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); - - if (mctrl & TIOCM_RTS) - temp |= UARTMODIR_RXRTSE; - - if (mctrl & TIOCM_CTS) - temp |= UARTMODIR_TXCTSE; - lpuart32_write(port, temp, UARTMODIR); } static void lpuart_break_ctl(struct uart_port *port, int break_state) |