diff options
| author | Dirk Behme <dirk.behme@de.bosch.com> | 2014-09-03 12:33:53 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-09-08 16:26:07 -0700 |
| commit | 26c474128b96d277234f35a7fd870ed12bef96ca (patch) | |
| tree | cff98901f80c6fc6d7e3e2050156893db04c5535 /drivers/tty | |
| parent | c993257bf7571945201205491de86268437ea174 (diff) | |
serial: imx: clean up imx_poll_get_char()
Looking at the get_poll_char() function of the 8250.c serial driver,
we learn:
* poll_get_char() doesn't have to save/disable/restore the interrupt
registers. No interrupt handling is needed in this function at all.
Remove it.
* Don't block in case there is no data available. So instead blocking
in the do {} while loop, just return with NO_POLL_CHAR, immediately .
Additionally, while the i.MX6 register URXD[7-0] contain the RX_DATA,
the upper bits of this register (URXD[15-10]) might contain some
control flags. To ensure that these are not returned with the data
read, just mask out URXD[7-0].
These changes fix the 'hang' working with kdb:
$ echo ttymxc3 > /sys/module/kgdboc/parameters/kgdboc
$ echo g >/proc/sysrq-trigger
[0]kdb> help
...
<hang>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/imx.c | 29 |
1 files changed, 4 insertions, 25 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index c86f1538bfdd..be13eb39fbf4 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -80,6 +80,7 @@ #define URXD_FRMERR (1<<12) #define URXD_BRK (1<<11) #define URXD_PRERR (1<<10) +#define URXD_RX_DATA (0xFF<<0) #define UCR1_ADEN (1<<15) /* Auto detect interrupt */ #define UCR1_ADBR (1<<14) /* Auto detect baud rate */ #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ @@ -1499,32 +1500,10 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser) #if defined(CONFIG_CONSOLE_POLL) static int imx_poll_get_char(struct uart_port *port) { - struct imx_port_ucrs old_ucr; - unsigned int status; - unsigned char c; - - /* save control registers */ - imx_port_ucrs_save(port, &old_ucr); - - /* disable interrupts */ - writel(UCR1_UARTEN, port->membase + UCR1); - writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI), - port->membase + UCR2); - writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN), - port->membase + UCR3); - - /* poll */ - do { - status = readl(port->membase + USR2); - } while (~status & USR2_RDR); - - /* read */ - c = readl(port->membase + URXD0); - - /* restore control registers */ - imx_port_ucrs_restore(port, &old_ucr); + if (!(readl(port->membase + USR2) & USR2_RDR)) + return NO_POLL_CHAR; - return c; + return readl(port->membase + URXD0) & URXD_RX_DATA; } static void imx_poll_put_char(struct uart_port *port, unsigned char c) |