summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
authorChristian Melki <christian.melki@ericsson.se>2012-04-30 11:21:26 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-05-01 13:40:29 -0400
commitf9a9111b540fd67db5dab332f4b83d86c90e27b1 (patch)
tree469a440d5c538c42c835e79c77fd3027971d0587 /drivers/tty/serial
parentaaa10eb1d0034eccc096f583fe308f0921617598 (diff)
8250.c: less than 2400 baud fix.
We noticed that we were loosing data at speed less than 2400 baud. It turned out our (TI16750 compatible) uart with 64 byte outgoing fifo was truncated to 16 byte (bit 5 sets fifo len) when modifying the fcr reg. The input code still fills the buffer with 64 bytes if I remember correctly and thus data is lost. Our fix was to remove whiping of the fcr content and just add the TRIGGER_1 which we want for latency. I can't see why this would not work on less than 2400 always, for all uarts ... Otherwise one would have to make sure the filling of the fifo re-checks the current state of available fifo size (urrk). Signed-off-by: Christian Melki <christian.melki@ericsson.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250.c9
1 files changed, 5 insertions, 4 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 182efcc90e2e..c9ac4eabe35a 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2259,10 +2259,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
quot++;
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
- if (baud < 2400)
- fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
- else
- fcr = uart_config[port->type].fcr;
+ fcr = uart_config[port->type].fcr;
+ if (baud < 2400) {
+ fcr &= ~UART_FCR_TRIGGER_MASK;
+ fcr |= UART_FCR_TRIGGER_1;
+ }
}
/*