diff options
| author | Tamseel Shams <m.shams@samsung.com> | 2020-08-10 08:30:21 +0530 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-08-18 13:53:42 +0200 |
| commit | 8c6c378b0cbe0c9f1390986b5f8ffb5f6ff7593b (patch) | |
| tree | 3bdee0b1bd4cedc79f5861d33256ac988fb6e2c1 /drivers/tty/serial | |
| parent | 205d300aea75623e1ae4aa43e0d265ab9cf195fd (diff) | |
serial: samsung: Removes the IRQ not found warning
In few older Samsung SoCs like s3c2410, s3c2412
and s3c2440, UART IP is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210,
exynos5433, and exynos4210 UART is having only 1
interrupt line. Due to this, "platform_get_irq(platdev, 1)"
call in the driver gives the following false-positive error:
"IRQ index 1 not found" on newer SoC's.
This patch adds the condition to check for Tx interrupt
only for the those SoC's which have 2 interrupt lines.
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200810030021.45348-1-m.shams@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/samsung_tty.c | 8 |
1 files changed, 5 insertions, 3 deletions
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 8ed3482d2e1e..8ae3e03fbd8c 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -1905,9 +1905,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->tx_irq = ret + 1; } - ret = platform_get_irq(platdev, 1); - if (ret > 0) - ourport->tx_irq = ret; + if (!s3c24xx_serial_has_interrupt_mask(port)) { + ret = platform_get_irq(platdev, 1); + if (ret > 0) + ourport->tx_irq = ret; + } /* * DMA is currently supported only on DT platforms, if DMA properties * are specified. |