summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
authorSoren Brinkmann <soren.brinkmann@xilinx.com>2014-04-04 17:23:41 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-04-24 16:21:51 -0700
commit35dc5a538fb54bc30bdedf4c825da5c970b5ff90 (patch)
tree1f00c2427bfd8fe320757cab5df2ef04606c6243 /drivers/tty/serial
parent5ce15d2d1efb9cacab9a331c730cc805124ee612 (diff)
tty: xuartps: Refactor read-modify-writes
A lot of read-modify-write sequences used a one-line statement which nests a readl() within a writel(). Convert this into code sequences that make the three steps more obvious. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/xilinx_uartps.c52
1 files changed, 24 insertions, 28 deletions
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 814391038abb..b182ab8cfd07 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -437,9 +437,9 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
spin_lock_irqsave(&xuartps->port->lock, flags);
/* Disable the TX and RX to set baud rate */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ ctrl_reg |= XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
spin_unlock_irqrestore(&xuartps->port->lock, flags);
@@ -464,9 +464,9 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
spin_lock_irqsave(&xuartps->port->lock, flags);
/* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
while (xuartps_readl(XUARTPS_CR_OFFSET) &
(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
@@ -479,10 +479,9 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
*/
xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
- (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
+ ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS);
+ ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
spin_unlock_irqrestore(&xuartps->port->lock, flags);
@@ -631,9 +630,9 @@ static void xuartps_set_termios(struct uart_port *port,
}
/* Disable the TX and RX to set baud rate */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ ctrl_reg |= XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
/*
* Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
@@ -651,20 +650,18 @@ static void xuartps_set_termios(struct uart_port *port,
uart_update_timeout(port, termios->c_cflag, baud);
/* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
-
ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
/*
* Clear the RX disable and TX disable bits and then set the TX enable
* bit and RX enable bit to enable the transmitter and receiver.
*/
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
- | (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS);
+ ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
@@ -1248,9 +1245,9 @@ static int xuartps_resume(struct device *device)
spin_lock_irqsave(&port->lock, flags);
/* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
+ ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
while (xuartps_readl(XUARTPS_CR_OFFSET) &
(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
cpu_relax();
@@ -1259,10 +1256,9 @@ static int xuartps_resume(struct device *device)
xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
/* Enable Tx/Rx */
ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
- (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
+ ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS);
+ ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN;
+ xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET);
spin_unlock_irqrestore(&port->lock, flags);
} else {