diff options
| author | Lukas Wunner <lukas@wunner.de> | 2020-05-12 14:40:02 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-05-15 14:47:05 +0200 |
| commit | c150c0f362c1e51c0e3216c9912b85b71d00e70d (patch) | |
| tree | c0cefb23cc8355ab56cf9c988d9d475d739e7247 /drivers/tty/serial/ar933x_uart.c | |
| parent | e0a851fe6b9b619527bd928aa93caaddd003f70c (diff) | |
serial: Allow uart_get_rs485_mode() to return errno
We're about to amend uart_get_rs485_mode() to support a GPIO pin for
rs485 bus termination. Retrieving the GPIO descriptor may fail, so
allow uart_get_rs485_mode() to return an errno and change all callers
to check for failure.
The GPIO descriptor is going to be stored in struct uart_port. Pass
that struct to uart_get_rs485_mode() in lieu of a struct device and
struct serial_rs485, both of which are directly accessible from struct
uart_port.
A few drivers call uart_get_rs485_mode() before setting the struct
device pointer in struct uart_port. Shuffle those calls around where
necessary.
[Heiko Stuebner did the ar933x_uart.c portion, hence his Signed-off-by.]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/271e814af4b0db3bffbbb74abf2b46b75add4516.1589285873.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/ar933x_uart.c')
| -rw-r--r-- | drivers/tty/serial/ar933x_uart.c | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 7e7f1398019f..0c80a79d7442 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -766,8 +766,6 @@ static int ar933x_uart_probe(struct platform_device *pdev) goto err_disable_clk; } - uart_get_rs485_mode(&pdev->dev, &port->rs485); - port->mapbase = mem_res->start; port->line = id; port->irq = irq_res->start; @@ -786,6 +784,10 @@ static int ar933x_uart_probe(struct platform_device *pdev) baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); + ret = uart_get_rs485_mode(port); + if (ret) + goto err_disable_clk; + up->gpios = mctrl_gpio_init(port, 0); if (IS_ERR(up->gpios) && PTR_ERR(up->gpios) != -ENOSYS) return PTR_ERR(up->gpios); |