Merge tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty and serial driver update for 4.4-rc1.

  Lots of serial driver updates and a few small tty core changes.  Full
  details in the shortlog.

  All of these have been in linux-next for a while"

* tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits)
  tty: Use unbound workqueue for all input workers
  tty: Abstract tty buffer work
  tty: Prevent tty teardown during tty_write_message()
  tty: core: Use correct spinlock flavor in tiocspgrp()
  tty: Combine SIGTTOU/SIGTTIN handling
  serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty()
  ttyFDC: Fix build problems due to use of module_{init,exit}
  tty: remove unneeded return statement
  serial: 8250_mid: add support for DMA engine handling from UART MMIO
  dmaengine: hsu: remove platform data
  dmaengine: hsu: introduce stubs for the exported functions
  dmaengine: hsu: make the UART driver in control of selecting this driver
  serial: fix mctrl helper functions
  serial: 8250_pci: Intel MID UART support to its own driver
  serial: fsl_lpuart: add earlycon support
  tty: disable unbind for old 74xx based serial/mpsc console port
  serial: pl011: Spelling s/clocks-names/clock-names/
  n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars
  tty: synclink, fix indentation
  serial: at91, fix rs485 properties
  ...

11 files changed, 646 insertions, 441 deletions

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 271d12137649..39126460c1f5 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -569,6 +569,9 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 	for (i = 0; i < nr_uarts; i++) {
 		struct uart_8250_port *up = &serial8250_ports[i];
 
+		if (up->port.type == PORT_8250_CIR)
+			continue;
+
 		if (up->port.dev)
 			continue;
 
@@ -1027,13 +1030,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		if (up->dl_write)
 			uart->dl_write = up->dl_write;
 
-		if (serial8250_isa_config != NULL)
-			serial8250_isa_config(0, &uart->port,
-					&uart->capabilities);
+		if (uart->port.type != PORT_8250_CIR) {
+			if (serial8250_isa_config != NULL)
+				serial8250_isa_config(0, &uart->port,
+						&uart->capabilities);
+
+			ret = uart_add_one_port(&serial8250_reg,
+						&uart->port);
+			if (ret == 0)
+				ret = uart->port.line;
+		} else {
+			dev_info(uart->port.dev,
+				"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
+				uart->port.iobase,
+				(unsigned long long)uart->port.mapbase,
+				uart->port.irq);
 
-		ret = uart_add_one_port(&serial8250_reg, &uart->port);
-		if (ret == 0)
-			ret = uart->port.line;
+			ret = 0;
+		}
 	}
 	mutex_unlock(&serial_mutex);
 
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index e508939daea3..78259d3c6a55 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -54,9 +54,6 @@ static void __dma_rx_complete(void *param)
 	struct dma_tx_state	state;
 	int			count;
 
-	dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
-				dma->rx_size, DMA_FROM_DEVICE);
-
 	dma->rx_running = 0;
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 
@@ -152,9 +149,6 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 
 	dma->rx_cookie = dmaengine_submit(desc);
 
-	dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr,
-				   dma->rx_size, DMA_FROM_DEVICE);
-
 	dma_async_issue_pending(dma->rxchan);
 
 	return 0;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 06324f17a0cb..a0cdbf35dcb1 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -63,6 +63,9 @@ struct dw8250_data {
 	struct clk		*pclk;
 	struct reset_control	*rst;
 	struct uart_8250_dma	dma;
+
+	unsigned int		skip_autocfg:1;
+	unsigned int		uart_16550_compatible:1;
 };
 
 #define BYT_PRV_CLK			0x800
@@ -244,24 +247,77 @@ out:
 	serial8250_do_set_termios(p, termios, old);
 }
 
-static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
+/*
+ * dw8250_fallback_dma_filter will prevent the UART from getting just any free
+ * channel on platforms that have DMA engines, but don't have any channels
+ * assigned to the UART.
+ *
+ * REVISIT: This is a work around for limitation in the DMA Engine API. Once the
+ * core problem is fixed, this function is no longer needed.
+ */
+static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param)
 {
 	return false;
 }
 
-static void dw8250_setup_port(struct uart_8250_port *up)
+static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
+{
+	return param == chan->device->dev->parent;
+}
+
+static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 {
-	struct uart_port	*p = &up->port;
-	u32			reg = readl(p->membase + DW_UART_UCV);
+	if (p->dev->of_node) {
+		struct device_node *np = p->dev->of_node;
+		int id;
+
+		/* get index of serial line, if found in DT aliases */
+		id = of_alias_get_id(np, "serial");
+		if (id >= 0)
+			p->line = id;
+#ifdef CONFIG_64BIT
+		if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
+			p->serial_in = dw8250_serial_inq;
+			p->serial_out = dw8250_serial_outq;
+			p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+			p->type = PORT_OCTEON;
+			data->usr_reg = 0x27;
+			data->skip_autocfg = true;
+		}
+#endif
+	} else if (has_acpi_companion(p->dev)) {
+		p->iotype = UPIO_MEM32;
+		p->regshift = 2;
+		p->serial_in = dw8250_serial_in32;
+		p->set_termios = dw8250_set_termios;
+		/* So far none of there implement the Busy Functionality */
+		data->uart_16550_compatible = true;
+	}
+
+	/* Platforms with iDMA */
+	if (platform_get_resource_byname(to_platform_device(p->dev),
+					 IORESOURCE_MEM, "lpss_priv")) {
+		p->set_termios = dw8250_set_termios;
+		data->dma.rx_param = p->dev->parent;
+		data->dma.tx_param = p->dev->parent;
+		data->dma.fn = dw8250_idma_filter;
+	}
+}
+
+static void dw8250_setup_port(struct uart_port *p)
+{
+	struct uart_8250_port *up = up_to_u8250p(p);
+	u32 reg;
 
 	/*
 	 * If the Component Version Register returns zero, we know that
 	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
 	 */
+	reg = readl(p->membase + DW_UART_UCV);
 	if (!reg)
 		return;
 
-	dev_dbg_ratelimited(p->dev, "Designware UART version %c.%c%c\n",
+	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
 		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
 
 	reg = readl(p->membase + DW_UART_CPR);
@@ -273,7 +329,6 @@ static void dw8250_setup_port(struct uart_8250_port *up)
 		p->type = PORT_16550A;
 		p->flags |= UPF_FIXED_TYPE;
 		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
-		up->tx_loadsz = p->fifosize;
 		up->capabilities = UART_CAP_FIFO;
 	}
 
@@ -281,166 +336,91 @@ static void dw8250_setup_port(struct uart_8250_port *up)
 		up->capabilities |= UART_CAP_AFE;
 }
 
-static int dw8250_probe_of(struct uart_port *p,
-			   struct dw8250_data *data)
+static int dw8250_probe(struct platform_device *pdev)
 {
-	struct device_node	*np = p->dev->of_node;
-	struct uart_8250_port *up = up_to_u8250p(p);
-	u32			val;
-	bool has_ucv = true;
-	int id;
+	struct uart_8250_port uart = {};
+	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int irq = platform_get_irq(pdev, 0);
+	struct uart_port *p = &uart.port;
+	struct dw8250_data *data;
+	int err;
+	u32 val;
 
-#ifdef CONFIG_64BIT
-	if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
-		p->serial_in = dw8250_serial_inq;
-		p->serial_out = dw8250_serial_outq;
-		p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
-		p->type = PORT_OCTEON;
-		data->usr_reg = 0x27;
-		has_ucv = false;
-	} else
-#endif
-	if (!of_property_read_u32(np, "reg-io-width", &val)) {
-		switch (val) {
-		case 1:
-			break;
-		case 4:
-			p->iotype = UPIO_MEM32;
-			p->serial_in = dw8250_serial_in32;
-			p->serial_out = dw8250_serial_out32;
-			break;
-		default:
-			dev_err(p->dev, "unsupported reg-io-width (%u)\n", val);
-			return -EINVAL;
-		}
+	if (!regs) {
+		dev_err(&pdev->dev, "no registers defined\n");
+		return -EINVAL;
 	}
-	if (has_ucv)
-		dw8250_setup_port(up);
 
-	/* if we have a valid fifosize, try hooking up DMA here */
-	if (p->fifosize) {
-		up->dma = &data->dma;
-
-		up->dma->rxconf.src_maxburst = p->fifosize / 4;
-		up->dma->txconf.dst_maxburst = p->fifosize / 4;
+	if (irq < 0) {
+		if (irq != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "cannot get irq\n");
+		return irq;
 	}
 
-	if (!of_property_read_u32(np, "reg-shift", &val))
+	spin_lock_init(&p->lock);
+	p->mapbase	= regs->start;
+	p->irq		= irq;
+	p->handle_irq	= dw8250_handle_irq;
+	p->pm		= dw8250_do_pm;
+	p->type		= PORT_8250;
+	p->flags	= UPF_SHARE_IRQ | UPF_FIXED_PORT;
+	p->dev		= &pdev->dev;
+	p->iotype	= UPIO_MEM;
+	p->serial_in	= dw8250_serial_in;
+	p->serial_out	= dw8250_serial_out;
+
+	p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+	if (!p->membase)
+		return -ENOMEM;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dma.fn = dw8250_fallback_dma_filter;
+	data->usr_reg = DW_UART_USR;
+	p->private_data = data;
+
+	data->uart_16550_compatible = device_property_read_bool(p->dev,
+						"snps,uart-16550-compatible");
+
+	err = device_property_read_u32(p->dev, "reg-shift", &val);
+	if (!err)
 		p->regshift = val;
 
-	/* get index of serial line, if found in DT aliases */
-	id = of_alias_get_id(np, "serial");
-	if (id >= 0)
-		p->line = id;
+	err = device_property_read_u32(p->dev, "reg-io-width", &val);
+	if (!err && val == 4) {
+		p->iotype = UPIO_MEM32;
+		p->serial_in = dw8250_serial_in32;
+		p->serial_out = dw8250_serial_out32;
+	}
 
-	if (of_property_read_bool(np, "dcd-override")) {
+	if (device_property_read_bool(p->dev, "dcd-override")) {
 		/* Always report DCD as active */
 		data->msr_mask_on |= UART_MSR_DCD;
 		data->msr_mask_off |= UART_MSR_DDCD;
 	}
 
-	if (of_property_read_bool(np, "dsr-override")) {
+	if (device_property_read_bool(p->dev, "dsr-override")) {
 		/* Always report DSR as active */
 		data->msr_mask_on |= UART_MSR_DSR;
 		data->msr_mask_off |= UART_MSR_DDSR;
 	}
 
-	if (of_property_read_bool(np, "cts-override")) {
+	if (device_property_read_bool(p->dev, "cts-override")) {
 		/* Always report CTS as active */
 		data->msr_mask_on |= UART_MSR_CTS;
 		data->msr_mask_off |= UART_MSR_DCTS;
 	}
 
-	if (of_property_read_bool(np, "ri-override")) {
+	if (device_property_read_bool(p->dev, "ri-override")) {
 		/* Always report Ring indicator as inactive */
 		data->msr_mask_off |= UART_MSR_RI;
 		data->msr_mask_off |= UART_MSR_TERI;
 	}
 
-	return 0;
-}
-
-static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
-{
-	struct device *dev = param;
-
-	if (dev != chan->device->dev->parent)
-		return false;
-
-	return true;
-}
-
-static int dw8250_probe_acpi(struct uart_8250_port *up,
-			     struct dw8250_data *data)
-{
-	struct uart_port *p = &up->port;
-
-	dw8250_setup_port(up);
-
-	p->iotype = UPIO_MEM32;
-	p->serial_in = dw8250_serial_in32;
-	p->serial_out = dw8250_serial_out32;
-	p->regshift = 2;
-
-	/* Platforms with iDMA */
-	if (platform_get_resource_byname(to_platform_device(up->port.dev),
-					 IORESOURCE_MEM, "lpss_priv")) {
-		data->dma.rx_param = up->port.dev->parent;
-		data->dma.tx_param = up->port.dev->parent;
-		data->dma.fn = dw8250_idma_filter;
-	}
-
-	up->dma = &data->dma;
-	up->dma->rxconf.src_maxburst = p->fifosize / 4;
-	up->dma->txconf.dst_maxburst = p->fifosize / 4;
-
-	up->port.set_termios = dw8250_set_termios;
-
-	return 0;
-}
-
-static int dw8250_probe(struct platform_device *pdev)
-{
-	struct uart_8250_port uart = {};
-	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	int irq = platform_get_irq(pdev, 0);
-	struct dw8250_data *data;
-	int err;
-
-	if (!regs) {
-		dev_err(&pdev->dev, "no registers defined\n");
-		return -EINVAL;
-	}
-
-	if (irq < 0) {
-		if (irq != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "cannot get irq\n");
-		return irq;
-	}
-
-	spin_lock_init(&uart.port.lock);
-	uart.port.mapbase = regs->start;
-	uart.port.irq = irq;
-	uart.port.handle_irq = dw8250_handle_irq;
-	uart.port.pm = dw8250_do_pm;
-	uart.port.type = PORT_8250;
-	uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
-	uart.port.dev = &pdev->dev;
-
-	uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
-					 resource_size(regs));
-	if (!uart.port.membase)
-		return -ENOMEM;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->usr_reg = DW_UART_USR;
-
 	/* Always ask for fixed clock rate from a property. */
-	device_property_read_u32(&pdev->dev, "clock-frequency",
-				 &uart.port.uartclk);
+	device_property_read_u32(p->dev, "clock-frequency", &p->uartclk);
 
 	/* If there is separate baudclk, get the rate from it. */
 	data->clk = devm_clk_get(&pdev->dev, "baudclk");
@@ -454,11 +434,11 @@ static int dw8250_probe(struct platform_device *pdev)
 			dev_warn(&pdev->dev, "could not enable optional baudclk: %d\n",
 				 err);
 		else
-			uart.port.uartclk = clk_get_rate(data->clk);
+			p->uartclk = clk_get_rate(data->clk);
 	}
 
 	/* If no clock rate is defined, fail. */
-	if (!uart.port.uartclk) {
+	if (!p->uartclk) {
 		dev_err(&pdev->dev, "clock rate not defined\n");
 		return -EINVAL;
 	}
@@ -484,26 +464,22 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (!IS_ERR(data->rst))
 		reset_control_deassert(data->rst);
 
-	data->dma.rx_param = data;
-	data->dma.tx_param = data;
-	data->dma.fn = dw8250_dma_filter;
+	dw8250_quirks(p, data);
 
-	uart.port.iotype = UPIO_MEM;
-	uart.port.serial_in = dw8250_serial_in;
-	uart.port.serial_out = dw8250_serial_out;
-	uart.port.private_data = data;
+	/* If the Busy Functionality is not implemented, don't handle it */
+	if (data->uart_16550_compatible) {
+		p->serial_out = NULL;
+		p->handle_irq = NULL;
+	}
 
-	if (pdev->dev.of_node) {
-		err = dw8250_probe_of(&uart.port, data);
-		if (err)
-			goto err_reset;
-	} else if (ACPI_HANDLE(&pdev->dev)) {
-		err = dw8250_probe_acpi(&uart, data);
-		if (err)
-			goto err_reset;
-	} else {
-		err = -ENODEV;
-		goto err_reset;
+	if (!data->skip_autocfg)
+		dw8250_setup_port(p);
+
+	/* If we have a valid fifosize, try hooking up DMA */
+	if (p->fifosize) {
+		data->dma.rxconf.src_maxburst = p->fifosize / 4;
+		data->dma.txconf.dst_maxburst = p->fifosize / 4;
+		uart.dma = &data->dma;
 	}
 
 	data->line = serial8250_register_8250_port(&uart);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index faed05f25bc2..ceb85792a5cf 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -29,6 +29,8 @@
 #include <linux/tty.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
@@ -152,3 +154,5 @@ int __init early_serial8250_setup(struct earlycon_device *device,
 }
 EARLYCON_DECLARE(uart8250, early_serial8250_setup);
 EARLYCON_DECLARE(uart, early_serial8250_setup);
+OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
+OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 7c1e4be48e7b..49394b4c5cfd 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -21,19 +21,33 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
 
+#include "8250.h"
+
+/** ingenic_uart_config: SOC specific config data. */
+struct ingenic_uart_config {
+	int tx_loadsz;
+	int fifosize;
+};
+
 struct ingenic_uart_data {
 	struct clk	*clk_module;
 	struct clk	*clk_baud;
 	int		line;
 };
 
+static const struct of_device_id of_match[];
+
 #define UART_FCR_UME	BIT(4)
 
+#define UART_MCR_MDCE	BIT(7)
+#define UART_MCR_FCM	BIT(6)
+
 static struct earlycon_device *early_device;
 
 static uint8_t __init early_in(struct uart_port *port, int offset)
@@ -129,6 +143,8 @@ OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
 
 static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 {
+	int ier;
+
 	switch (offset) {
 	case UART_FCR:
 		/* UART module enable */
@@ -136,9 +152,22 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 		break;
 
 	case UART_IER:
+		/* Enable receive timeout interrupt with the
+		 * receive line status interrupt */
 		value |= (value & 0x4) << 2;
 		break;
 
+	case UART_MCR:
+		/* If we have enabled modem status IRQs we should enable modem
+		 * mode. */
+		ier = p->serial_in(p, UART_IER);
+
+		if (ier & UART_IER_MSI)
+			value |= UART_MCR_MDCE | UART_MCR_FCM;
+		else
+			value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
+		break;
+
 	default:
 		break;
 	}
@@ -146,14 +175,45 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 	writeb(value, p->membase + (offset << p->regshift));
 }
 
+static unsigned int ingenic_uart_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int value;
+
+	value = readb(p->membase + (offset << p->regshift));
+
+	/* Hide non-16550 compliant bits from higher levels */
+	switch (offset) {
+	case UART_FCR:
+		value &= ~UART_FCR_UME;
+		break;
+
+	case UART_MCR:
+		value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
+		break;
+
+	default:
+		break;
+	}
+	return value;
+}
+
 static int ingenic_uart_probe(struct platform_device *pdev)
 {
 	struct uart_8250_port uart = {};
 	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	struct ingenic_uart_data *data;
+	const struct ingenic_uart_config *cdata;
+	const struct of_device_id *match;
 	int err, line;
 
+	match = of_match_device(of_match, &pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "Error: No device match found\n");
+		return -ENODEV;
+	}
+	cdata = match->data;
+
 	if (!regs || !irq) {
 		dev_err(&pdev->dev, "no registers/irq defined\n");
 		return -EINVAL;
@@ -164,14 +224,18 @@ static int ingenic_uart_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	spin_lock_init(&uart.port.lock);
-	uart.port.type = PORT_16550;
+	uart.port.type = PORT_16550A;
 	uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
 	uart.port.iotype = UPIO_MEM;
 	uart.port.mapbase = regs->start;
 	uart.port.regshift = 2;
 	uart.port.serial_out = ingenic_uart_serial_out;
+	uart.port.serial_in = ingenic_uart_serial_in;
 	uart.port.irq = irq->start;
 	uart.port.dev = &pdev->dev;
+	uart.port.fifosize = cdata->fifosize;
+	uart.tx_loadsz = cdata->tx_loadsz;
+	uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE;
 
 	/* Check for a fixed line number */
 	line = of_alias_get_id(pdev->dev.of_node, "serial");
@@ -241,10 +305,26 @@ static int ingenic_uart_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct ingenic_uart_config jz4740_uart_config = {
+	.tx_loadsz = 8,
+	.fifosize = 16,
+};
+
+static const struct ingenic_uart_config jz4760_uart_config = {
+	.tx_loadsz = 16,
+	.fifosize = 32,
+};
+
+static const struct ingenic_uart_config jz4780_uart_config = {
+	.tx_loadsz = 32,
+	.fifosize = 64,
+};
+
 static const struct of_device_id of_match[] = {
-	{ .compatible = "ingenic,jz4740-uart" },
-	{ .compatible = "ingenic,jz4775-uart" },
-	{ .compatible = "ingenic,jz4780-uart" },
+	{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
+	{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
+	{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
+	{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_match);
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
new file mode 100644
index 000000000000..88531a36b69c
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -0,0 +1,326 @@
+/*
+ * 8250_mid.c - Driver for UART on Intel Penwell and various other Intel SOCs
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/rational.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <linux/dma/hsu.h>
+
+#include "8250.h"
+
+#define PCI_DEVICE_ID_INTEL_PNW_UART1	0x081b
+#define PCI_DEVICE_ID_INTEL_PNW_UART2	0x081c
+#define PCI_DEVICE_ID_INTEL_PNW_UART3	0x081d
+#define PCI_DEVICE_ID_INTEL_TNG_UART	0x1191
+#define PCI_DEVICE_ID_INTEL_DNV_UART	0x19d8
+
+/* Intel MID Specific registers */
+#define INTEL_MID_UART_PS		0x30
+#define INTEL_MID_UART_MUL		0x34
+#define INTEL_MID_UART_DIV		0x38
+
+struct mid8250;
+
+struct mid8250_board {
+	unsigned long freq;
+	unsigned int base_baud;
+	int (*setup)(struct mid8250 *, struct uart_port *p);
+	void (*exit)(struct mid8250 *);
+};
+
+struct mid8250 {
+	int line;
+	int dma_index;
+	struct pci_dev *dma_dev;
+	struct uart_8250_dma dma;
+	struct mid8250_board *board;
+	struct hsu_dma_chip dma_chip;
+};
+
+/*****************************************************************************/
+
+static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
+{
+	struct pci_dev *pdev = to_pci_dev(p->dev);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_INTEL_PNW_UART1:
+		mid->dma_index = 0;
+		break;
+	case PCI_DEVICE_ID_INTEL_PNW_UART2:
+		mid->dma_index = 1;
+		break;
+	case PCI_DEVICE_ID_INTEL_PNW_UART3:
+		mid->dma_index = 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mid->dma_dev = pci_get_slot(pdev->bus,
+				    PCI_DEVFN(PCI_SLOT(pdev->devfn), 3));
+	return 0;
+}
+
+static int tng_setup(struct mid8250 *mid, struct uart_port *p)
+{
+	struct pci_dev *pdev = to_pci_dev(p->dev);
+	int index = PCI_FUNC(pdev->devfn);
+
+	/* Currently no support for HSU port0 */
+	if (index-- == 0)
+		return -ENODEV;
+
+	mid->dma_index = index;
+	mid->dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0));
+	return 0;
+}
+
+static int dnv_handle_irq(struct uart_port *p)
+{
+	struct mid8250 *mid = p->private_data;
+	int ret;
+
+	ret = hsu_dma_irq(&mid->dma_chip, 0);
+	ret |= hsu_dma_irq(&mid->dma_chip, 1);
+
+	/* For now, letting the HW generate separate interrupt for the UART */
+	if (ret)
+		return ret;
+
+	return serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+}
+
+#define DNV_DMA_CHAN_OFFSET 0x80
+
+static int dnv_setup(struct mid8250 *mid, struct uart_port *p)
+{
+	struct hsu_dma_chip *chip = &mid->dma_chip;
+	struct pci_dev *pdev = to_pci_dev(p->dev);
+	int ret;
+
+	chip->dev = &pdev->dev;
+	chip->irq = pdev->irq;
+	chip->regs = p->membase;
+	chip->length = pci_resource_len(pdev, 0);
+	chip->offset = DNV_DMA_CHAN_OFFSET;
+
+	/* Falling back to PIO mode if DMA probing fails */
+	ret = hsu_dma_probe(chip);
+	if (ret)
+		return 0;
+
+	mid->dma_dev = pdev;
+
+	p->handle_irq = dnv_handle_irq;
+	return 0;
+}
+
+static void dnv_exit(struct mid8250 *mid)
+{
+	if (!mid->dma_dev)
+		return;
+	hsu_dma_remove(&mid->dma_chip);
+}
+
+/*****************************************************************************/
+
+static void mid8250_set_termios(struct uart_port *p,
+				struct ktermios *termios,
+				struct ktermios *old)
+{
+	unsigned int baud = tty_termios_baud_rate(termios);
+	struct mid8250 *mid = p->private_data;
+	unsigned short ps = 16;
+	unsigned long fuart = baud * ps;
+	unsigned long w = BIT(24) - 1;
+	unsigned long mul, div;
+
+	if (mid->board->freq < fuart) {
+		/* Find prescaler value that satisfies Fuart < Fref */
+		if (mid->board->freq > baud)
+			ps = mid->board->freq / baud;	/* baud rate too high */
+		else
+			ps = 1;				/* PLL case */
+		fuart = baud * ps;
+	} else {
+		/* Get Fuart closer to Fref */
+		fuart *= rounddown_pow_of_two(mid->board->freq / fuart);
+	}
+
+	rational_best_approximation(fuart, mid->board->freq, w, w, &mul, &div);
+	p->uartclk = fuart * 16 / ps;		/* core uses ps = 16 always */
+
+	writel(ps, p->membase + INTEL_MID_UART_PS);		/* set PS */
+	writel(mul, p->membase + INTEL_MID_UART_MUL);		/* set MUL */
+	writel(div, p->membase + INTEL_MID_UART_DIV);
+
+	serial8250_do_set_termios(p, termios, old);
+}
+
+static bool mid8250_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct hsu_dma_slave *s = param;
+
+	if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id)
+		return false;
+
+	chan->private = s;
+	return true;
+}
+
+static int mid8250_dma_setup(struct mid8250 *mid, struct uart_8250_port *port)
+{
+	struct uart_8250_dma *dma = &mid->dma;
+	struct device *dev = port->port.dev;
+	struct hsu_dma_slave *rx_param;
+	struct hsu_dma_slave *tx_param;
+
+	if (!mid->dma_dev)
+		return 0;
+
+	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
+	if (!rx_param)
+		return -ENOMEM;
+
+	tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
+	if (!tx_param)
+		return -ENOMEM;
+
+	rx_param->chan_id = mid->dma_index * 2 + 1;
+	tx_param->chan_id = mid->dma_index * 2;
+
+	dma->rxconf.src_maxburst = 64;
+	dma->txconf.dst_maxburst = 64;
+
+	rx_param->dma_dev = &mid->dma_dev->dev;
+	tx_param->dma_dev = &mid->dma_dev->dev;
+
+	dma->fn = mid8250_dma_filter;
+	dma->rx_param = rx_param;
+	dma->tx_param = tx_param;
+
+	port->dma = dma;
+	return 0;
+}
+
+static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct uart_8250_port uart;
+	struct mid8250 *mid;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	pci_set_master(pdev);
+
+	mid = devm_kzalloc(&pdev->dev, sizeof(*mid), GFP_KERNEL);
+	if (!mid)
+		return -ENOMEM;
+
+	mid->board = (struct mid8250_board *)id->driver_data;
+
+	memset(&uart, 0, sizeof(struct uart_8250_port));
+
+	uart.port.dev = &pdev->dev;
+	uart.port.irq = pdev->irq;
+	uart.port.private_data = mid;
+	uart.port.type = PORT_16750;
+	uart.port.iotype = UPIO_MEM;
+	uart.port.uartclk = mid->board->base_baud * 16;
+	uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
+	uart.port.set_termios = mid8250_set_termios;
+
+	uart.port.mapbase = pci_resource_start(pdev, 0);
+	uart.port.membase = pcim_iomap(pdev, 0, 0);
+	if (!uart.port.membase)
+		return -ENOMEM;
+
+	if (mid->board->setup) {
+		ret = mid->board->setup(mid, &uart.port);
+		if (ret)
+			return ret;
+	}
+
+	ret = mid8250_dma_setup(mid, &uart);
+	if (ret)
+		goto err;
+
+	ret = serial8250_register_8250_port(&uart);
+	if (ret < 0)
+		goto err;
+
+	mid->line = ret;
+
+	pci_set_drvdata(pdev, mid);
+	return 0;
+err:
+	if (mid->board->exit)
+		mid->board->exit(mid);
+	return ret;
+}
+
+static void mid8250_remove(struct pci_dev *pdev)
+{
+	struct mid8250 *mid = pci_get_drvdata(pdev);
+
+	if (mid->board->exit)
+		mid->board->exit(mid);
+
+	serial8250_unregister_port(mid->line);
+}
+
+static const struct mid8250_board pnw_board = {
+	.freq = 50000000,
+	.base_baud = 115200,
+	.setup = pnw_setup,
+};
+
+static const struct mid8250_board tng_board = {
+	.freq = 38400000,
+	.base_baud = 1843200,
+	.setup = tng_setup,
+};
+
+static const struct mid8250_board dnv_board = {
+	.freq = 133333333,
+	.base_baud = 115200,
+	.setup = dnv_setup,
+	.exit = dnv_exit,
+};
+
+#define MID_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board }
+
+static const struct pci_device_id pci_ids[] = {
+	MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART1, pnw_board),
+	MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board),
+	MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board),
+	MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board),
+	MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board),
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver mid8250_pci_driver = {
+	.name           = "8250_mid",
+	.id_table       = pci_ids,
+	.probe          = mid8250_probe,
+	.remove         = mid8250_remove,
+};
+
+module_pci_driver(mid8250_pci_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel MID UART driver");
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 826c5c4a2103..a2c0734c76e2 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -439,7 +439,6 @@ static void omap_8250_set_termios(struct uart_port *port,
 	priv->xoff = termios->c_cc[VSTOP];
 
 	priv->efr = 0;
-	up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY);
 	up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
 
 	if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
@@ -726,6 +725,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
 	struct dma_tx_state     state;
 	int                     count;
 	unsigned long		flags;
+	int			ret;
 
 	dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
 				dma->rx_size, DMA_FROM_DEVICE);
@@ -741,8 +741,10 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
 
 	count = dma->rx_size - state.residue;
 
-	tty_insert_flip_string(tty_port, dma->rx_buf, count);
-	p->port.icount.rx += count;
+	ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
+
+	p->port.icount.rx += ret;
+	p->port.icount.buf_overrun += count - ret;
 unlock:
 	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
 
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 68042dd1c525..4097f3f65b3b 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -28,7 +28,6 @@
 
 #include <linux/dmaengine.h>
 #include <linux/platform_data/dma-dw.h>
-#include <linux/platform_data/dma-hsu.h>
 
 #include "8250.h"
 
@@ -1508,167 +1507,6 @@ byt_serial_setup(struct serial_private *priv,
 	return ret;
 }
 
-#define INTEL_MID_UART_PS		0x30
-#define INTEL_MID_UART_MUL		0x34
-#define INTEL_MID_UART_DIV		0x38
-
-static void intel_mid_set_termios(struct uart_port *p,
-				  struct ktermios *termios,
-				  struct ktermios *old,
-				  unsigned long fref)
-{
-	unsigned int baud = tty_termios_baud_rate(termios);
-	unsigned short ps = 16;
-	unsigned long fuart = baud * ps;
-	unsigned long w = BIT(24) - 1;
-	unsigned long mul, div;
-
-	if (fref < fuart) {
-		/* Find prescaler value that satisfies Fuart < Fref */
-		if (fref > baud)
-			ps = fref / baud;	/* baud rate too high */
-		else
-			ps = 1;			/* PLL case */
-		fuart = baud * ps;
-	} else {
-		/* Get Fuart closer to Fref */
-		fuart *= rounddown_pow_of_two(fref / fuart);
-	}
-
-	rational_best_approximation(fuart, fref, w, w, &mul, &div);
-	p->uartclk = fuart * 16 / ps;		/* core uses ps = 16 always */
-
-	writel(ps, p->membase + INTEL_MID_UART_PS);		/* set PS */
-	writel(mul, p->membase + INTEL_MID_UART_MUL);		/* set MUL */
-	writel(div, p->membase + INTEL_MID_UART_DIV);
-
-	serial8250_do_set_termios(p, termios, old);
-}
-
-static void intel_mid_set_termios_38_4M(struct uart_port *p,
-					struct ktermios *termios,
-					struct ktermios *old)
-{
-	intel_mid_set_termios(p, termios, old, 38400000);
-}
-
-static void intel_mid_set_termios_50M(struct uart_port *p,
-				      struct ktermios *termios,
-				      struct ktermios *old)
-{
-	/*
-	 * The uart clk is 50Mhz, and the baud rate come from:
-	 *      baud = 50M * MUL / (DIV * PS * DLAB)
-	 */
-	intel_mid_set_termios(p, termios, old, 50000000);
-}
-
-static bool intel_mid_dma_filter(struct dma_chan *chan, void *param)
-{
-	struct hsu_dma_slave *s = param;
-
-	if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id)
-		return false;
-
-	chan->private = s;
-	return true;
-}
-
-static int intel_mid_serial_setup(struct serial_private *priv,
-				  const struct pciserial_board *board,
-				  struct uart_8250_port *port, int idx,
-				  int index, struct pci_dev *dma_dev)
-{
-	struct device *dev = port->port.dev;
-	struct uart_8250_dma *dma;
-	struct hsu_dma_slave *tx_param, *rx_param;
-
-	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
-	if (!dma)
-		return -ENOMEM;
-
-	tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
-	if (!tx_param)
-		return -ENOMEM;
-
-	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
-	if (!rx_param)
-		return -ENOMEM;
-
-	rx_param->chan_id = index * 2 + 1;
-	tx_param->chan_id = index * 2;
-
-	dma->rxconf.src_maxburst = 64;
-	dma->txconf.dst_maxburst = 64;
-
-	rx_param->dma_dev = &dma_dev->dev;
-	tx_param->dma_dev = &dma_dev->dev;
-
-	dma->fn = intel_mid_dma_filter;
-	dma->rx_param = rx_param;
-	dma->tx_param = tx_param;
-
-	port->port.type = PORT_16750;
-	port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
-	port->dma = dma;
-
-	return pci_default_setup(priv, board, port, idx);
-}
-
-#define PCI_DEVICE_ID_INTEL_PNW_UART1	0x081b
-#define PCI_DEVICE_ID_INTEL_PNW_UART2	0x081c
-#define PCI_DEVICE_ID_INTEL_PNW_UART3	0x081d
-
-static int pnw_serial_setup(struct serial_private *priv,
-			    const struct pciserial_board *board,
-			    struct uart_8250_port *port, int idx)
-{
-	struct pci_dev *pdev = priv->dev;
-	struct pci_dev *dma_dev;
-	int index;
-
-	switch (pdev->device) {
-	case PCI_DEVICE_ID_INTEL_PNW_UART1:
-		index = 0;
-		break;
-	case PCI_DEVICE_ID_INTEL_PNW_UART2:
-		index = 1;
-		break;
-	case PCI_DEVICE_ID_INTEL_PNW_UART3:
-		index = 2;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3));
-
-	port->port.set_termios = intel_mid_set_termios_50M;
-
-	return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev);
-}
-
-#define PCI_DEVICE_ID_INTEL_TNG_UART	0x1191
-
-static int tng_serial_setup(struct serial_private *priv,
-			    const struct pciserial_board *board,
-			    struct uart_8250_port *port, int idx)
-{
-	struct pci_dev *pdev = priv->dev;
-	struct pci_dev *dma_dev;
-	int index = PCI_FUNC(pdev->devfn);
-
-	/* Currently no support for HSU port0 */
-	if (index-- == 0)
-		return -ENODEV;
-
-	dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0));
-
-	port->port.set_termios = intel_mid_set_termios_38_4M;
-
-	return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev);
-}
-
 static int
 pci_omegapci_setup(struct serial_private *priv,
 		      const struct pciserial_board *board,
@@ -2212,34 +2050,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_INTEL,
-		.device		= PCI_DEVICE_ID_INTEL_PNW_UART1,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pnw_serial_setup,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_INTEL,
-		.device		= PCI_DEVICE_ID_INTEL_PNW_UART2,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pnw_serial_setup,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_INTEL,
-		.device		= PCI_DEVICE_ID_INTEL_PNW_UART3,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pnw_serial_setup,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_INTEL,
-		.device		= PCI_DEVICE_ID_INTEL_TNG_UART,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= tng_serial_setup,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_INTEL,
 		.device		= PCI_DEVICE_ID_INTEL_BSW_UART1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
@@ -3119,8 +2929,6 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
 	pbn_byt,
-	pbn_pnw,
-	pbn_tng,
 	pbn_qrk,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
@@ -3907,16 +3715,6 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset	= 0x80,
 		.reg_shift      = 2,
 	},
-	[pbn_pnw] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 1,
-		.base_baud	= 115200,
-	},
-	[pbn_tng] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 1,
-		.base_baud	= 1843200,
-	},
 	[pbn_qrk] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
@@ -4005,6 +3803,13 @@ static const struct pci_device_id blacklist[] = {
 	{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
 	{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
 	{ PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
+
+	/* Intel platforms with MID UART */
+	{ PCI_VDEVICE(INTEL, 0x081b), },
+	{ PCI_VDEVICE(INTEL, 0x081c), },
+	{ PCI_VDEVICE(INTEL, 0x081d), },
+	{ PCI_VDEVICE(INTEL, 0x1191), },
+	{ PCI_VDEVICE(INTEL, 0x19d8), },
 };
 
 /*
@@ -5702,26 +5507,6 @@ static struct pci_device_id serial_pci_tbl[] = {
 		pbn_byt },
 
 	/*
-	 * Intel Penwell
-	 */
-	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pnw},
-	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pnw},
-	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pnw},
-
-	/*
-	 * Intel Tangier
-	 */
-	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TNG_UART,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_tng},
-
-	/*
 	 * Intel Quark x1000
 	 */
 	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 0bbf34035d6a..52d82d2ac726 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -284,7 +284,7 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value)
 	serial_out(up, UART_DLM, value >> 8 & 0xff);
 }
 
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+#ifdef CONFIG_SERIAL_8250_RT288X
 
 /* Au1x00/RT288x UART hardware has a weird register layout */
 static const s8 au_io_in_map[8] = {
@@ -435,7 +435,7 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = mem32be_serial_out;
 		break;
 
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
+#ifdef CONFIG_SERIAL_8250_RT288X
 	case UPIO_AU:
 		p->serial_in = au_serial_in;
 		p->serial_out = au_serial_out;
@@ -1246,6 +1246,9 @@ static void autoconfig_irq(struct uart_8250_port *up)
 		inb_p(ICP);
 	}
 
+	if (uart_console(port))
+		console_lock();
+
 	/* forget possible initially masked and pending IRQ */
 	probe_irq_off(probe_irq_on());
 	save_mcr = serial_in(up, UART_MCR);
@@ -1277,6 +1280,9 @@ static void autoconfig_irq(struct uart_8250_port *up)
 	if (port->flags & UPF_FOURPORT)
 		outb_p(save_ICP, ICP);
 
+	if (uart_console(port))
+		console_unlock();
+
 	port->irq = (irq > 0) ? irq : 0;
 }
 
@@ -1807,9 +1813,6 @@ int serial8250_do_startup(struct uart_port *port)
 	unsigned char lsr, iir;
 	int retval;
 
-	if (port->type == PORT_8250_CIR)
-		return -ENODEV;
-
 	if (!port->fifosize)
 		port->fifosize = uart_config[port->type].fifo_size;
 	if (!up->tx_loadsz)
@@ -2230,6 +2233,23 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
 		serial_port_out(port, 0x2, quot_frac);
 }
 
+static unsigned int
+serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+			 struct ktermios *old)
+{
+	unsigned int tolerance = port->uartclk / 100;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 * Allow 1% tolerance at the upper limit so uart clks marginally
+	 * slower than nominal still match standard baud rates without
+	 * causing transmission errors.
+	 */
+	return uart_get_baud_rate(port, termios, old,
+				  port->uartclk / 16 / 0xffff,
+				  (port->uartclk + tolerance) / 16);
+}
+
 void
 serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		          struct ktermios *old)
@@ -2241,12 +2261,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	cval = serial8250_compute_lcr(up, termios->c_cflag);
 
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old,
-				  port->uartclk / 16 / 0xffff,
-				  port->uartclk / 16);
+	baud = serial8250_get_baud_rate(port, termios, old);
 	quot = serial8250_get_divisor(up, baud, &frac);
 
 	/*
@@ -2513,14 +2528,8 @@ static void serial8250_release_port(struct uart_port *port)
 static int serial8250_request_port(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
-	int ret;
-
-	if (port->type == PORT_8250_CIR)
-		return -ENODEV;
-
-	ret = serial8250_request_std_resource(up);
 
-	return ret;
+	return serial8250_request_std_resource(up);
 }
 
 static int fcr_get_rxtrig_bytes(struct uart_8250_port *up)
@@ -2668,9 +2677,6 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	struct uart_8250_port *up = up_to_u8250p(port);
 	int ret;
 
-	if (port->type == PORT_8250_CIR)
-		return;
-
 	/*
 	 * Find the region that we can probe for.  This in turn
 	 * tells us whether we can probe for the type of port.
@@ -2805,6 +2811,27 @@ static void serial8250_console_putchar(struct uart_port *port, int ch)
 }
 
 /*
+ *	Restore serial console when h/w power-off detected
+ */
+static void serial8250_console_restore(struct uart_8250_port *up)
+{
+	struct uart_port *port = &up->port;
+	struct ktermios termios;
+	unsigned int baud, quot, frac = 0;
+
+	termios.c_cflag = port->cons->cflag;
+	if (port->state->port.tty && termios.c_cflag == 0)
+		termios.c_cflag = port->state->port.tty->termios.c_cflag;
+
+	baud = serial8250_get_baud_rate(port, &termios, NULL);
+	quot = serial8250_get_divisor(up, baud, &frac);
+
+	serial8250_set_divisor(port, baud, quot, frac);
+	serial_port_out(port, UART_LCR, up->lcr);
+	serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
+}
+
+/*
  *	Print a string to the serial port trying not to disturb
  *	any possible real use of the port...
  *
@@ -2841,22 +2868,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
 
 	/* check scratch reg to see if port powered off during system sleep */
 	if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
-		struct ktermios termios;
-		unsigned int baud, quot, frac = 0;
-
-		termios.c_cflag = port->cons->cflag;
-		if (port->state->port.tty && termios.c_cflag == 0)
-			termios.c_cflag = port->state->port.tty->termios.c_cflag;
-
-		baud = uart_get_baud_rate(port, &termios, NULL,
-					  port->uartclk / 16 / 0xffff,
-					  port->uartclk / 16);
-		quot = serial8250_get_divisor(up, baud, &frac);
-
-		serial8250_set_divisor(port, baud, quot, frac);
-		serial_port_out(port, UART_LCR, up->lcr);
-		serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
-
+		serial8250_console_restore(up);
 		up->canary = 0;
 	}
 
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index e1de1181b322..e6f5e12a2d83 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -274,8 +274,8 @@ config SERIAL_8250_ACORN
 
 config SERIAL_8250_FSL
 	bool
-	depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
-	default PPC
+	depends on SERIAL_8250_CONSOLE
+	default PPC || ARM || ARM64
 
 config SERIAL_8250_DW
 	tristate "Support for Synopsys DesignWare 8250 quirks"
@@ -294,11 +294,12 @@ config SERIAL_8250_EM
 
 config SERIAL_8250_RT288X
 	bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
-	depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
+	depends on SERIAL_8250
+	default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620
 	help
-	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
-	  serial port, say Y to this option. The driver can handle up to 2 serial
-	  ports. If unsure, say N.
+	  Selecting this option will add support for the alternate register
+	  layout used by Ralink RT288x/RT305x, Alchemy Au1xxx, and some others.
+	  If unsure, say N.
 
 config SERIAL_8250_OMAP
 	tristate "Support for OMAP internal UART (8250 based driver)"
@@ -337,7 +338,7 @@ config SERIAL_8250_FINTEK
 	  through the PNP driver. If unsure, say N.
 
 config SERIAL_8250_LPC18XX
-	bool "NXP LPC18xx/43xx serial port support"
+	tristate "NXP LPC18xx/43xx serial port support"
 	depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST)
 	default ARCH_LPC18XX
 	help
@@ -366,3 +367,13 @@ config SERIAL_8250_INGENIC
 	help
 	  If you have a system using an Ingenic SoC and wish to make use of
 	  its UARTs, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_MID
+	tristate "Support for serial ports on Intel MID platforms"
+	depends on SERIAL_8250 && PCI
+	select HSU_DMA if SERIAL_8250_DMA
+	select HSU_DMA_PCI if X86_INTEL_MID
+	help
+	  Selecting this option will enable handling of the extra features
+	  present on the UART found on Intel Medfield SOC and various other
+	  Intel platforms.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 39c6d2277570..e177f8681ada 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -27,5 +27,6 @@ obj-$(CONFIG_SERIAL_8250_LPC18XX)	+= 8250_lpc18xx.o
 obj-$(CONFIG_SERIAL_8250_MT6577)	+= 8250_mtk.o
 obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
+obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt