Merge tag 'iio-for-4.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

2nd round of new IIO device support, features and cleanups for the 4.6 cycle.

New Device Support
* Apex stx104 DAC
  - new driver for this PC104 board. Right now DAC support only.
* ADI ad5064
  - Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs.
  - Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616,
    ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629.
* ADI ad7192
  - add support for the ad7193
* Invensense mpu6050
  - substantial rework of driver to use regmap allowing SPI support extending
    the now split driver to cover the MPU6000.
* TI adc0832
  - new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs.
* TI ads1015
  - new driver, note that there is an existing hwmon driver. The long term
    intention is to probably remove the hwmon driver but for now we just have
    guards in place to ensure this driver is not built if that one is enabled.
* TI afe4403
  - new driver for this heart rate monitor / pulse oximeter front end chip.
* TI afe4404
  - new driver for this heart rate monitor / pulse oximeter front end chip.

Staging Graduations
* mxs-lradc
  - A combined general purpose and touch screen (input) device driver.
    Originally held in staging to allow reworking into and MFD but as
    that wasn't happening and isn't an absolute requirement we are moving
    it out of staging.

Driver new features
* ms5611
  - triggered buffer support
  - IIO_CHAN_INFO_SCALE to aid the triggered buffer support.

Driver cleanups / reworks / fixes
* ad5064
  - Use an enum for the register map layout to allow support of additional
    chips (precursor to the new support listed above).
  - Structural driver changes to allow support of the slightly different
    handling for the ltc parts above.
* ad5933
  - drop an exceptional & unnecessary for a function pointer.
* ad7606
  - Cleanup the repeated copies of pm ops.
  - consolidate the various channels specs via a sport of rearranging so only
    one version is needed.
* atlas ph sensor
  - add select IRQ_WORK
* hmc8543 (soon to move out of staging)
  - Comment style fixes
  - functionality of suspend and resume was swapped.
* spear-adc
  - use devm_clk_dev instead of managing the clk lifetime by hand.

Core
* Use new dmaengine_terminate_sync call to avoid a theoretical race.
* Fix docs for mlock in struct iio_dev as it is correctly taken in some
  drivers (docs used to say for core only).
* Add a helper function for calculating the scan index storage size within
  the core cutting out some cut and paste versions of the same code.

14 files changed, 113 insertions, 1919 deletions

diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index b9519be90fda..deff89973d53 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -59,12 +59,12 @@ config AD7816
 	  temperature sensors and ADC.
 
 config AD7192
-	tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver"
+	tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
 	depends on SPI
 	select AD_SIGMA_DELTA
 	help
 	  Say yes here to build support for Analog Devices AD7190,
-	  AD7192 or AD7195 SPI analog to digital converters (ADC).
+	  AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC).
 	  If unsure, say N (but it's safe to say "Y").
 
 	  To compile this driver as a module, choose M here: the
@@ -92,20 +92,6 @@ config LPC32XX_ADC
 	  activate only one via device tree selection.  Provides direct access
 	  via sysfs.
 
-config MXS_LRADC
-	tristate "Freescale i.MX23/i.MX28 LRADC"
-	depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
-	depends on INPUT
-	select STMP_DEVICE
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
-	help
-	  Say yes here to build support for i.MX23/i.MX28 LRADC convertor
-	  built into these chips.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mxs-lradc.
-
 config SPEAR_ADC
 	tristate "ST SPEAr ADC"
 	depends on PLAT_SPEAR || COMPILE_TEST
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index 0c87ce3530f8..3cdd83ccec8e 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -12,5 +12,4 @@ obj-$(CONFIG_AD7816) += ad7816.o
 obj-$(CONFIG_AD7192) += ad7192.o
 obj-$(CONFIG_AD7280) += ad7280a.o
 obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
-obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 92f2b72cce30..f843f19cf675 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -1,7 +1,7 @@
 /*
- * AD7190 AD7192 AD7195 SPI ADC driver
+ * AD7190 AD7192 AD7193 AD7195 SPI ADC driver
  *
- * Copyright 2011-2012 Analog Devices Inc.
+ * Copyright 2011-2015 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -92,26 +92,43 @@
 
 #define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */
 #define AD7192_CONF_REFSEL	BIT(20) /* REFIN1/REFIN2 Reference Select */
-#define AD7192_CONF_CHAN(x)	(((1 << (x)) & 0xFF) << 8) /* Channel select */
-#define AD7192_CONF_CHAN_MASK	(0xFF << 8) /* Channel select mask */
+#define AD7192_CONF_CHAN(x)	((x) << 8) /* Channel select */
+#define AD7192_CONF_CHAN_MASK	(0x7FF << 8) /* Channel select mask */
 #define AD7192_CONF_BURN	BIT(7) /* Burnout current enable */
 #define AD7192_CONF_REFDET	BIT(6) /* Reference detect enable */
 #define AD7192_CONF_BUF		BIT(4) /* Buffered Mode Enable */
 #define AD7192_CONF_UNIPOLAR	BIT(3) /* Unipolar/Bipolar Enable */
 #define AD7192_CONF_GAIN(x)	((x) & 0x7) /* Gain Select */
 
-#define AD7192_CH_AIN1P_AIN2M	0 /* AIN1(+) - AIN2(-) */
-#define AD7192_CH_AIN3P_AIN4M	1 /* AIN3(+) - AIN4(-) */
-#define AD7192_CH_TEMP		2 /* Temp Sensor */
-#define AD7192_CH_AIN2P_AIN2M	3 /* AIN2(+) - AIN2(-) */
-#define AD7192_CH_AIN1		4 /* AIN1 - AINCOM */
-#define AD7192_CH_AIN2		5 /* AIN2 - AINCOM */
-#define AD7192_CH_AIN3		6 /* AIN3 - AINCOM */
-#define AD7192_CH_AIN4		7 /* AIN4 - AINCOM */
+#define AD7192_CH_AIN1P_AIN2M	BIT(0) /* AIN1(+) - AIN2(-) */
+#define AD7192_CH_AIN3P_AIN4M	BIT(1) /* AIN3(+) - AIN4(-) */
+#define AD7192_CH_TEMP		BIT(2) /* Temp Sensor */
+#define AD7192_CH_AIN2P_AIN2M	BIT(3) /* AIN2(+) - AIN2(-) */
+#define AD7192_CH_AIN1		BIT(4) /* AIN1 - AINCOM */
+#define AD7192_CH_AIN2		BIT(5) /* AIN2 - AINCOM */
+#define AD7192_CH_AIN3		BIT(6) /* AIN3 - AINCOM */
+#define AD7192_CH_AIN4		BIT(7) /* AIN4 - AINCOM */
+
+#define AD7193_CH_AIN1P_AIN2M	0x000  /* AIN1(+) - AIN2(-) */
+#define AD7193_CH_AIN3P_AIN4M	0x001  /* AIN3(+) - AIN4(-) */
+#define AD7193_CH_AIN5P_AIN6M	0x002  /* AIN5(+) - AIN6(-) */
+#define AD7193_CH_AIN7P_AIN8M	0x004  /* AIN7(+) - AIN8(-) */
+#define AD7193_CH_TEMP		0x100 /* Temp senseor */
+#define AD7193_CH_AIN2P_AIN2M	0x200 /* AIN2(+) - AIN2(-) */
+#define AD7193_CH_AIN1		0x401 /* AIN1 - AINCOM */
+#define AD7193_CH_AIN2		0x402 /* AIN2 - AINCOM */
+#define AD7193_CH_AIN3		0x404 /* AIN3 - AINCOM */
+#define AD7193_CH_AIN4		0x408 /* AIN4 - AINCOM */
+#define AD7193_CH_AIN5		0x410 /* AIN5 - AINCOM */
+#define AD7193_CH_AIN6		0x420 /* AIN6 - AINCOM */
+#define AD7193_CH_AIN7		0x440 /* AIN7 - AINCOM */
+#define AD7193_CH_AIN8		0x480 /* AIN7 - AINCOM */
+#define AD7193_CH_AINCOM	0x600 /* AINCOM - AINCOM */
 
 /* ID Register Bit Designations (AD7192_REG_ID) */
 #define ID_AD7190		0x4
 #define ID_AD7192		0x0
+#define ID_AD7193		0x2
 #define ID_AD7195		0x6
 #define AD7192_ID_MASK		0x0F
 
@@ -607,6 +624,24 @@ static const struct iio_chan_spec ad7192_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(8),
 };
 
+static const struct iio_chan_spec ad7193_channels[] = {
+	AD_SD_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M, 24, 32, 0),
+	AD_SD_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M, 24, 32, 0),
+	AD_SD_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M, 24, 32, 0),
+	AD_SD_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M, 24, 32, 0),
+	AD_SD_TEMP_CHANNEL(4, AD7193_CH_TEMP, 24, 32, 0),
+	AD_SD_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M, 24, 32, 0),
+	AD_SD_CHANNEL(6, 1, AD7193_CH_AIN1, 24, 32, 0),
+	AD_SD_CHANNEL(7, 2, AD7193_CH_AIN2, 24, 32, 0),
+	AD_SD_CHANNEL(8, 3, AD7193_CH_AIN3, 24, 32, 0),
+	AD_SD_CHANNEL(9, 4, AD7193_CH_AIN4, 24, 32, 0),
+	AD_SD_CHANNEL(10, 5, AD7193_CH_AIN5, 24, 32, 0),
+	AD_SD_CHANNEL(11, 6, AD7193_CH_AIN6, 24, 32, 0),
+	AD_SD_CHANNEL(12, 7, AD7193_CH_AIN7, 24, 32, 0),
+	AD_SD_CHANNEL(13, 8, AD7193_CH_AIN8, 24, 32, 0),
+	IIO_CHAN_SOFT_TIMESTAMP(14),
+};
+
 static int ad7192_probe(struct spi_device *spi)
 {
 	const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev);
@@ -651,8 +686,18 @@ static int ad7192_probe(struct spi_device *spi)
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = ad7192_channels;
-	indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
+
+	switch (st->devid) {
+	case ID_AD7193:
+		indio_dev->channels = ad7193_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
+		break;
+	default:
+		indio_dev->channels = ad7192_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
+		break;
+	}
+
 	if (st->devid == ID_AD7195)
 		indio_dev->info = &ad7195_info;
 	else
@@ -699,6 +744,7 @@ static int ad7192_remove(struct spi_device *spi)
 static const struct spi_device_id ad7192_id[] = {
 	{"ad7190", ID_AD7190},
 	{"ad7192", ID_AD7192},
+	{"ad7193", ID_AD7193},
 	{"ad7195", ID_AD7195},
 	{}
 };
@@ -715,5 +761,5 @@ static struct spi_driver ad7192_driver = {
 module_spi_driver(ad7192_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7195 ADC");
+MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h
index ec89d055cf58..cca946924c58 100644
--- a/drivers/staging/iio/adc/ad7606.h
+++ b/drivers/staging/iio/adc/ad7606.h
@@ -85,8 +85,6 @@ struct ad7606_bus_ops {
 	int (*read_block)(struct device *, int, void *);
 };
 
-void ad7606_suspend(struct iio_dev *indio_dev);
-void ad7606_resume(struct iio_dev *indio_dev);
 struct iio_dev *ad7606_probe(struct device *dev, int irq,
 			      void __iomem *base_address, unsigned id,
 			      const struct ad7606_bus_ops *bops);
@@ -101,4 +99,12 @@ enum ad7606_supported_device_ids {
 
 int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev);
 void ad7606_ring_cleanup(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops ad7606_pm_ops;
+#define AD7606_PM_OPS (&ad7606_pm_ops)
+#else
+#define AD7606_PM_OPS NULL
+#endif
+
 #endif /* IIO_ADC_AD7606_H_ */
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 2c9d8b7de9f5..fe6caeee0843 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -250,7 +250,8 @@ static const struct attribute_group ad7606_attribute_group_range = {
 		},						\
 	}
 
-static const struct iio_chan_spec ad7606_8_channels[] = {
+static const struct iio_chan_spec ad7606_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(8),
 	AD7606_CHANNEL(0),
 	AD7606_CHANNEL(1),
 	AD7606_CHANNEL(2),
@@ -259,25 +260,6 @@ static const struct iio_chan_spec ad7606_8_channels[] = {
 	AD7606_CHANNEL(5),
 	AD7606_CHANNEL(6),
 	AD7606_CHANNEL(7),
-	IIO_CHAN_SOFT_TIMESTAMP(8),
-};
-
-static const struct iio_chan_spec ad7606_6_channels[] = {
-	AD7606_CHANNEL(0),
-	AD7606_CHANNEL(1),
-	AD7606_CHANNEL(2),
-	AD7606_CHANNEL(3),
-	AD7606_CHANNEL(4),
-	AD7606_CHANNEL(5),
-	IIO_CHAN_SOFT_TIMESTAMP(6),
-};
-
-static const struct iio_chan_spec ad7606_4_channels[] = {
-	AD7606_CHANNEL(0),
-	AD7606_CHANNEL(1),
-	AD7606_CHANNEL(2),
-	AD7606_CHANNEL(3),
-	IIO_CHAN_SOFT_TIMESTAMP(4),
 };
 
 static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
@@ -287,20 +269,20 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
 	[ID_AD7606_8] = {
 		.name = "ad7606",
 		.int_vref_mv = 2500,
-		.channels = ad7606_8_channels,
-		.num_channels = 8,
+		.channels = ad7606_channels,
+		.num_channels = 9,
 	},
 	[ID_AD7606_6] = {
 		.name = "ad7606-6",
 		.int_vref_mv = 2500,
-		.channels = ad7606_6_channels,
-		.num_channels = 6,
+		.channels = ad7606_channels,
+		.num_channels = 7,
 	},
 	[ID_AD7606_4] = {
 		.name = "ad7606-4",
 		.int_vref_mv = 2500,
-		.channels = ad7606_4_channels,
-		.num_channels = 4,
+		.channels = ad7606_channels,
+		.num_channels = 5,
 	},
 };
 
@@ -578,8 +560,11 @@ int ad7606_remove(struct iio_dev *indio_dev, int irq)
 }
 EXPORT_SYMBOL_GPL(ad7606_remove);
 
-void ad7606_suspend(struct iio_dev *indio_dev)
+#ifdef CONFIG_PM_SLEEP
+
+static int ad7606_suspend(struct device *dev)
 {
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	if (gpio_is_valid(st->pdata->gpio_stby)) {
@@ -587,11 +572,13 @@ void ad7606_suspend(struct iio_dev *indio_dev)
 			gpio_set_value(st->pdata->gpio_range, 1);
 		gpio_set_value(st->pdata->gpio_stby, 0);
 	}
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(ad7606_suspend);
 
-void ad7606_resume(struct iio_dev *indio_dev)
+static int ad7606_resume(struct device *dev)
 {
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	if (gpio_is_valid(st->pdata->gpio_stby)) {
@@ -602,8 +589,14 @@ void ad7606_resume(struct iio_dev *indio_dev)
 		gpio_set_value(st->pdata->gpio_stby, 1);
 		ad7606_reset(st);
 	}
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(ad7606_resume);
+
+SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
+EXPORT_SYMBOL_GPL(ad7606_pm_ops);
+
+#endif
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
index adc370ee8632..84d23930fdde 100644
--- a/drivers/staging/iio/adc/ad7606_par.c
+++ b/drivers/staging/iio/adc/ad7606_par.c
@@ -90,36 +90,6 @@ static int ad7606_par_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int ad7606_par_suspend(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
-	ad7606_suspend(indio_dev);
-
-	return 0;
-}
-
-static int ad7606_par_resume(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
-	ad7606_resume(indio_dev);
-
-	return 0;
-}
-
-static const struct dev_pm_ops ad7606_pm_ops = {
-	.suspend = ad7606_par_suspend,
-	.resume  = ad7606_par_resume,
-};
-
-#define AD7606_PAR_PM_OPS (&ad7606_pm_ops)
-
-#else
-#define AD7606_PAR_PM_OPS NULL
-#endif  /* CONFIG_PM */
-
 static const struct platform_device_id ad7606_driver_ids[] = {
 	{
 		.name		= "ad7606-8",
@@ -142,7 +112,7 @@ static struct platform_driver ad7606_driver = {
 	.id_table = ad7606_driver_ids,
 	.driver = {
 		.name	 = "ad7606",
-		.pm    = AD7606_PAR_PM_OPS,
+		.pm	 = AD7606_PM_OPS,
 	},
 };
 
diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c
index cbb36317200e..d873a5164595 100644
--- a/drivers/staging/iio/adc/ad7606_spi.c
+++ b/drivers/staging/iio/adc/ad7606_spi.c
@@ -62,36 +62,6 @@ static int ad7606_spi_remove(struct spi_device *spi)
 	return ad7606_remove(indio_dev, spi->irq);
 }
 
-#ifdef CONFIG_PM
-static int ad7606_spi_suspend(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
-	ad7606_suspend(indio_dev);
-
-	return 0;
-}
-
-static int ad7606_spi_resume(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
-	ad7606_resume(indio_dev);
-
-	return 0;
-}
-
-static const struct dev_pm_ops ad7606_pm_ops = {
-	.suspend = ad7606_spi_suspend,
-	.resume  = ad7606_spi_resume,
-};
-
-#define AD7606_SPI_PM_OPS (&ad7606_pm_ops)
-
-#else
-#define AD7606_SPI_PM_OPS NULL
-#endif
-
 static const struct spi_device_id ad7606_id[] = {
 	{"ad7606-8", ID_AD7606_8},
 	{"ad7606-6", ID_AD7606_6},
@@ -103,7 +73,7 @@ MODULE_DEVICE_TABLE(spi, ad7606_id);
 static struct spi_driver ad7606_driver = {
 	.driver = {
 		.name = "ad7606",
-		.pm    = AD7606_SPI_PM_OPS,
+		.pm = AD7606_PM_OPS,
 	},
 	.probe = ad7606_spi_probe,
 	.remove = ad7606_spi_remove,
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
deleted file mode 100644
index bb1f15224ac8..000000000000
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ /dev/null
@@ -1,1770 +0,0 @@
-/*
- * Freescale MXS LRADC driver
- *
- * Copyright (c) 2012 DENX Software Engineering, GmbH.
- * Marek Vasut <marex@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/stmp_device.h>
-#include <linux/sysfs.h>
-
-#include <linux/iio/buffer.h>
-#include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
-#include <linux/iio/trigger_consumer.h>
-#include <linux/iio/triggered_buffer.h>
-#include <linux/iio/sysfs.h>
-
-#define DRIVER_NAME		"mxs-lradc"
-
-#define LRADC_MAX_DELAY_CHANS	4
-#define LRADC_MAX_MAPPED_CHANS	8
-#define LRADC_MAX_TOTAL_CHANS	16
-
-#define LRADC_DELAY_TIMER_HZ	2000
-
-/*
- * Make this runtime configurable if necessary. Currently, if the buffered mode
- * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before
- * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000)
- * seconds. The result is that the samples arrive every 500mS.
- */
-#define LRADC_DELAY_TIMER_PER	200
-#define LRADC_DELAY_TIMER_LOOP	5
-
-/*
- * Once the pen touches the touchscreen, the touchscreen switches from
- * IRQ-driven mode to polling mode to prevent interrupt storm. The polling
- * is realized by worker thread, which is called every 20 or so milliseconds.
- * This gives the touchscreen enough fluency and does not strain the system
- * too much.
- */
-#define LRADC_TS_SAMPLE_DELAY_MS	5
-
-/*
- * The LRADC reads the following amount of samples from each touchscreen
- * channel and the driver then computes average of these.
- */
-#define LRADC_TS_SAMPLE_AMOUNT		4
-
-enum mxs_lradc_id {
-	IMX23_LRADC,
-	IMX28_LRADC,
-};
-
-static const char * const mx23_lradc_irq_names[] = {
-	"mxs-lradc-touchscreen",
-	"mxs-lradc-channel0",
-	"mxs-lradc-channel1",
-	"mxs-lradc-channel2",
-	"mxs-lradc-channel3",
-	"mxs-lradc-channel4",
-	"mxs-lradc-channel5",
-	"mxs-lradc-channel6",
-	"mxs-lradc-channel7",
-};
-
-static const char * const mx28_lradc_irq_names[] = {
-	"mxs-lradc-touchscreen",
-	"mxs-lradc-thresh0",
-	"mxs-lradc-thresh1",
-	"mxs-lradc-channel0",
-	"mxs-lradc-channel1",
-	"mxs-lradc-channel2",
-	"mxs-lradc-channel3",
-	"mxs-lradc-channel4",
-	"mxs-lradc-channel5",
-	"mxs-lradc-channel6",
-	"mxs-lradc-channel7",
-	"mxs-lradc-button0",
-	"mxs-lradc-button1",
-};
-
-struct mxs_lradc_of_config {
-	const int		irq_count;
-	const char * const	*irq_name;
-	const u32		*vref_mv;
-};
-
-#define VREF_MV_BASE 1850
-
-static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
-	VREF_MV_BASE,		/* CH0 */
-	VREF_MV_BASE,		/* CH1 */
-	VREF_MV_BASE,		/* CH2 */
-	VREF_MV_BASE,		/* CH3 */
-	VREF_MV_BASE,		/* CH4 */
-	VREF_MV_BASE,		/* CH5 */
-	VREF_MV_BASE * 2,	/* CH6 VDDIO */
-	VREF_MV_BASE * 4,	/* CH7 VBATT */
-	VREF_MV_BASE,		/* CH8 Temp sense 0 */
-	VREF_MV_BASE,		/* CH9 Temp sense 1 */
-	VREF_MV_BASE,		/* CH10 */
-	VREF_MV_BASE,		/* CH11 */
-	VREF_MV_BASE,		/* CH12 USB_DP */
-	VREF_MV_BASE,		/* CH13 USB_DN */
-	VREF_MV_BASE,		/* CH14 VBG */
-	VREF_MV_BASE * 4,	/* CH15 VDD5V */
-};
-
-static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
-	VREF_MV_BASE,		/* CH0 */
-	VREF_MV_BASE,		/* CH1 */
-	VREF_MV_BASE,		/* CH2 */
-	VREF_MV_BASE,		/* CH3 */
-	VREF_MV_BASE,		/* CH4 */
-	VREF_MV_BASE,		/* CH5 */
-	VREF_MV_BASE,		/* CH6 */
-	VREF_MV_BASE * 4,	/* CH7 VBATT */
-	VREF_MV_BASE,		/* CH8 Temp sense 0 */
-	VREF_MV_BASE,		/* CH9 Temp sense 1 */
-	VREF_MV_BASE * 2,	/* CH10 VDDIO */
-	VREF_MV_BASE,		/* CH11 VTH */
-	VREF_MV_BASE * 2,	/* CH12 VDDA */
-	VREF_MV_BASE,		/* CH13 VDDD */
-	VREF_MV_BASE,		/* CH14 VBG */
-	VREF_MV_BASE * 4,	/* CH15 VDD5V */
-};
-
-static const struct mxs_lradc_of_config mxs_lradc_of_config[] = {
-	[IMX23_LRADC] = {
-		.irq_count	= ARRAY_SIZE(mx23_lradc_irq_names),
-		.irq_name	= mx23_lradc_irq_names,
-		.vref_mv	= mx23_vref_mv,
-	},
-	[IMX28_LRADC] = {
-		.irq_count	= ARRAY_SIZE(mx28_lradc_irq_names),
-		.irq_name	= mx28_lradc_irq_names,
-		.vref_mv	= mx28_vref_mv,
-	},
-};
-
-enum mxs_lradc_ts {
-	MXS_LRADC_TOUCHSCREEN_NONE = 0,
-	MXS_LRADC_TOUCHSCREEN_4WIRE,
-	MXS_LRADC_TOUCHSCREEN_5WIRE,
-};
-
-/*
- * Touchscreen handling
- */
-enum lradc_ts_plate {
-	LRADC_TOUCH = 0,
-	LRADC_SAMPLE_X,
-	LRADC_SAMPLE_Y,
-	LRADC_SAMPLE_PRESSURE,
-	LRADC_SAMPLE_VALID,
-};
-
-enum mxs_lradc_divbytwo {
-	MXS_LRADC_DIV_DISABLED = 0,
-	MXS_LRADC_DIV_ENABLED,
-};
-
-struct mxs_lradc_scale {
-	unsigned int		integer;
-	unsigned int		nano;
-};
-
-struct mxs_lradc {
-	struct device		*dev;
-	void __iomem		*base;
-	int			irq[13];
-
-	struct clk		*clk;
-
-	u32			*buffer;
-	struct iio_trigger	*trig;
-
-	struct mutex		lock;
-
-	struct completion	completion;
-
-	const u32		*vref_mv;
-	struct mxs_lradc_scale	scale_avail[LRADC_MAX_TOTAL_CHANS][2];
-	unsigned long		is_divided;
-
-	/*
-	 * When the touchscreen is enabled, we give it two private virtual
-	 * channels: #6 and #7. This means that only 6 virtual channels (instead
-	 * of 8) will be available for buffered capture.
-	 */
-#define TOUCHSCREEN_VCHANNEL1		7
-#define TOUCHSCREEN_VCHANNEL2		6
-#define BUFFER_VCHANS_LIMITED		0x3f
-#define BUFFER_VCHANS_ALL		0xff
-	u8			buffer_vchans;
-
-	/*
-	 * Furthermore, certain LRADC channels are shared between touchscreen
-	 * and/or touch-buttons and generic LRADC block. Therefore when using
-	 * either of these, these channels are not available for the regular
-	 * sampling. The shared channels are as follows:
-	 *
-	 * CH0 -- Touch button #0
-	 * CH1 -- Touch button #1
-	 * CH2 -- Touch screen XPUL
-	 * CH3 -- Touch screen YPLL
-	 * CH4 -- Touch screen XNUL
-	 * CH5 -- Touch screen YNLR
-	 * CH6 -- Touch screen WIPER (5-wire only)
-	 *
-	 * The bit fields below represents which parts of the LRADC block are
-	 * switched into special mode of operation. These channels can not
-	 * be sampled as regular LRADC channels. The driver will refuse any
-	 * attempt to sample these channels.
-	 */
-#define CHAN_MASK_TOUCHBUTTON		(BIT(1) | BIT(0))
-#define CHAN_MASK_TOUCHSCREEN_4WIRE	(0xf << 2)
-#define CHAN_MASK_TOUCHSCREEN_5WIRE	(0x1f << 2)
-	enum mxs_lradc_ts	use_touchscreen;
-	bool			use_touchbutton;
-
-	struct input_dev	*ts_input;
-
-	enum mxs_lradc_id	soc;
-	enum lradc_ts_plate	cur_plate; /* state machine */
-	bool			ts_valid;
-	unsigned		ts_x_pos;
-	unsigned		ts_y_pos;
-	unsigned		ts_pressure;
-
-	/* handle touchscreen's physical behaviour */
-	/* samples per coordinate */
-	unsigned		over_sample_cnt;
-	/* time clocks between samples */
-	unsigned		over_sample_delay;
-	/* time in clocks to wait after the plates where switched */
-	unsigned		settling_delay;
-};
-
-#define	LRADC_CTRL0				0x00
-# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE	BIT(23)
-# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE	BIT(22)
-# define LRADC_CTRL0_MX28_YNNSW	/* YM */	BIT(21)
-# define LRADC_CTRL0_MX28_YPNSW	/* YP */	BIT(20)
-# define LRADC_CTRL0_MX28_YPPSW	/* YP */	BIT(19)
-# define LRADC_CTRL0_MX28_XNNSW	/* XM */	BIT(18)
-# define LRADC_CTRL0_MX28_XNPSW	/* XM */	BIT(17)
-# define LRADC_CTRL0_MX28_XPPSW	/* XP */	BIT(16)
-
-# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE	BIT(20)
-# define LRADC_CTRL0_MX23_YM			BIT(19)
-# define LRADC_CTRL0_MX23_XM			BIT(18)
-# define LRADC_CTRL0_MX23_YP			BIT(17)
-# define LRADC_CTRL0_MX23_XP			BIT(16)
-
-# define LRADC_CTRL0_MX28_PLATE_MASK \
-		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
-		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
-		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
-		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
-
-# define LRADC_CTRL0_MX23_PLATE_MASK \
-		(LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
-		LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
-		LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
-
-#define	LRADC_CTRL1				0x10
-#define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		BIT(24)
-#define	LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
-#define	LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
-#define	LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK	(0x01ff << 16)
-#define	LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
-#define	LRADC_CTRL1_TOUCH_DETECT_IRQ		BIT(8)
-#define	LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
-#define	LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
-#define	LRADC_CTRL1_MX23_LRADC_IRQ_MASK		0x01ff
-#define	LRADC_CTRL1_LRADC_IRQ_OFFSET		0
-
-#define	LRADC_CTRL2				0x20
-#define	LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET	24
-#define	LRADC_CTRL2_TEMPSENSE_PWD		BIT(15)
-
-#define	LRADC_STATUS				0x40
-#define	LRADC_STATUS_TOUCH_DETECT_RAW		BIT(0)
-
-#define	LRADC_CH(n)				(0x50 + (0x10 * (n)))
-#define	LRADC_CH_ACCUMULATE			BIT(29)
-#define	LRADC_CH_NUM_SAMPLES_MASK		(0x1f << 24)
-#define	LRADC_CH_NUM_SAMPLES_OFFSET		24
-#define	LRADC_CH_NUM_SAMPLES(x) \
-				((x) << LRADC_CH_NUM_SAMPLES_OFFSET)
-#define	LRADC_CH_VALUE_MASK			0x3ffff
-#define	LRADC_CH_VALUE_OFFSET			0
-
-#define	LRADC_DELAY(n)				(0xd0 + (0x10 * (n)))
-#define	LRADC_DELAY_TRIGGER_LRADCS_MASK		(0xffUL << 24)
-#define	LRADC_DELAY_TRIGGER_LRADCS_OFFSET	24
-#define	LRADC_DELAY_TRIGGER(x) \
-				(((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \
-				LRADC_DELAY_TRIGGER_LRADCS_MASK)
-#define	LRADC_DELAY_KICK			BIT(20)
-#define	LRADC_DELAY_TRIGGER_DELAYS_MASK		(0xf << 16)
-#define	LRADC_DELAY_TRIGGER_DELAYS_OFFSET	16
-#define	LRADC_DELAY_TRIGGER_DELAYS(x) \
-				(((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \
-				LRADC_DELAY_TRIGGER_DELAYS_MASK)
-#define	LRADC_DELAY_LOOP_COUNT_MASK		(0x1f << 11)
-#define	LRADC_DELAY_LOOP_COUNT_OFFSET		11
-#define	LRADC_DELAY_LOOP(x) \
-				(((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \
-				LRADC_DELAY_LOOP_COUNT_MASK)
-#define	LRADC_DELAY_DELAY_MASK			0x7ff
-#define	LRADC_DELAY_DELAY_OFFSET		0
-#define	LRADC_DELAY_DELAY(x) \
-				(((x) << LRADC_DELAY_DELAY_OFFSET) & \
-				LRADC_DELAY_DELAY_MASK)
-
-#define	LRADC_CTRL4				0x140
-#define	LRADC_CTRL4_LRADCSELECT_MASK(n)		(0xf << ((n) * 4))
-#define	LRADC_CTRL4_LRADCSELECT_OFFSET(n)	((n) * 4)
-#define	LRADC_CTRL4_LRADCSELECT(n, x) \
-				(((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \
-				LRADC_CTRL4_LRADCSELECT_MASK(n))
-
-#define LRADC_RESOLUTION			12
-#define LRADC_SINGLE_SAMPLE_MASK		((1 << LRADC_RESOLUTION) - 1)
-
-static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg)
-{
-	writel(val, lradc->base + reg + STMP_OFFSET_REG_SET);
-}
-
-static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg)
-{
-	writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR);
-}
-
-static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg)
-{
-	writel(val, lradc->base + reg);
-}
-
-static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc)
-{
-	if (lradc->soc == IMX23_LRADC)
-		return LRADC_CTRL0_MX23_PLATE_MASK;
-	return LRADC_CTRL0_MX28_PLATE_MASK;
-}
-
-static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc)
-{
-	if (lradc->soc == IMX23_LRADC)
-		return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK;
-	return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK;
-}
-
-static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
-{
-	if (lradc->soc == IMX23_LRADC)
-		return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
-	return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
-}
-
-static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc)
-{
-	if (lradc->soc == IMX23_LRADC)
-		return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE;
-	return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE;
-}
-
-static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc)
-{
-	if (lradc->soc == IMX23_LRADC)
-		return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM;
-	return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
-}
-
-static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc)
-{
-	if (lradc->soc == IMX23_LRADC)
-		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM;
-	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
-}
-
-static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc)
-{
-	if (lradc->soc == IMX23_LRADC)
-		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM;
-	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
-}
-
-static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc)
-{
-	return !!(readl(lradc->base + LRADC_STATUS) &
-					LRADC_STATUS_TOUCH_DETECT_RAW);
-}
-
-static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch,
-				  unsigned ch)
-{
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch),
-			    LRADC_CTRL4);
-	mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4);
-}
-
-static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
-{
-	/*
-	 * prepare for oversampling conversion
-	 *
-	 * from the datasheet:
-	 * "The ACCUMULATE bit in the appropriate channel register
-	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
-	 * otherwise, the IRQs will not fire."
-	 */
-	mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE |
-			  LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1),
-			  LRADC_CH(ch));
-
-	/* from the datasheet:
-	 * "Software must clear this register in preparation for a
-	 * multi-cycle accumulation.
-	 */
-	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch));
-
-	/*
-	 * prepare the delay/loop unit according to the oversampling count
-	 *
-	 * from the datasheet:
-	 * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1,
-	 * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise,
-	 * the LRADC will not trigger the delay group."
-	 */
-	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) |
-			  LRADC_DELAY_TRIGGER_DELAYS(0) |
-			  LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
-			  LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
-			  LRADC_DELAY(3));
-
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1);
-
-	/*
-	 * after changing the touchscreen plates setting
-	 * the signals need some initial time to settle. Start the
-	 * SoC's delay unit and start the conversion later
-	 * and automatically.
-	 */
-	mxs_lradc_reg_wrt(
-		lradc,
-		LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
-		LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
-		LRADC_DELAY_KICK |
-		LRADC_DELAY_DELAY(lradc->settling_delay),
-		LRADC_DELAY(2));
-}
-
-/*
- * Pressure detection is special:
- * We want to do both required measurements for the pressure detection in
- * one turn. Use the hardware features to chain both conversions and let the
- * hardware report one interrupt if both conversions are done
- */
-static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
-					unsigned ch2)
-{
-	u32 reg;
-
-	/*
-	 * prepare for oversampling conversion
-	 *
-	 * from the datasheet:
-	 * "The ACCUMULATE bit in the appropriate channel register
-	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
-	 * otherwise, the IRQs will not fire."
-	 */
-	reg = LRADC_CH_ACCUMULATE |
-		LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1);
-	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1));
-	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2));
-
-	/* from the datasheet:
-	 * "Software must clear this register in preparation for a
-	 * multi-cycle accumulation.
-	 */
-	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1));
-	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2));
-
-	/* prepare the delay/loop unit according to the oversampling count */
-	mxs_lradc_reg_wrt(
-		    lradc,
-		    LRADC_DELAY_TRIGGER(1 << ch1) |
-		    LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */
-		    LRADC_DELAY_TRIGGER_DELAYS(0) |
-		    LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
-		    LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
-		    LRADC_DELAY(3));
-
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1);
-
-	/*
-	 * after changing the touchscreen plates setting
-	 * the signals need some initial time to settle. Start the
-	 * SoC's delay unit and start the conversion later
-	 * and automatically.
-	 */
-	mxs_lradc_reg_wrt(
-		lradc,
-		LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
-		LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
-		LRADC_DELAY_KICK |
-		LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2));
-}
-
-static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc,
-					   unsigned channel)
-{
-	u32 reg;
-	unsigned num_samples, val;
-
-	reg = readl(lradc->base + LRADC_CH(channel));
-	if (reg & LRADC_CH_ACCUMULATE)
-		num_samples = lradc->over_sample_cnt;
-	else
-		num_samples = 1;
-
-	val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET;
-	return val / num_samples;
-}
-
-static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc,
-					   unsigned ch1, unsigned ch2)
-{
-	u32 reg, mask;
-	unsigned pressure, m1, m2;
-
-	mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2);
-	reg = readl(lradc->base + LRADC_CTRL1) & mask;
-
-	while (reg != mask) {
-		reg = readl(lradc->base + LRADC_CTRL1) & mask;
-		dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg);
-	}
-
-	m1 = mxs_lradc_read_raw_channel(lradc, ch1);
-	m2 = mxs_lradc_read_raw_channel(lradc, ch2);
-
-	if (m2 == 0) {
-		dev_warn(lradc->dev, "Cannot calculate pressure\n");
-		return 1 << (LRADC_RESOLUTION - 1);
-	}
-
-	/* simply scale the value from 0 ... max ADC resolution */
-	pressure = m1;
-	pressure *= (1 << LRADC_RESOLUTION);
-	pressure /= m2;
-
-	dev_dbg(lradc->dev, "Pressure = %u\n", pressure);
-	return pressure;
-}
-
-#define TS_CH_XP 2
-#define TS_CH_YP 3
-#define TS_CH_XM 4
-#define TS_CH_YM 5
-
-/*
- * YP(open)--+-------------+
- *           |             |--+
- *           |             |  |
- *    YM(-)--+-------------+  |
- *             +--------------+
- *             |              |
- *         XP(weak+)        XM(open)
- *
- * "weak+" means 200k Ohm VDDIO
- * (-) means GND
- */
-static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc)
-{
-	/*
-	 * In order to detect a touch event the 'touch detect enable' bit
-	 * enables:
-	 *  - a weak pullup to the X+ connector
-	 *  - a strong ground at the Y- connector
-	 */
-	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
-	mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc),
-			  LRADC_CTRL0);
-}
-
-/*
- * YP(meas)--+-------------+
- *           |             |--+
- *           |             |  |
- * YM(open)--+-------------+  |
- *             +--------------+
- *             |              |
- *           XP(+)          XM(-)
- *
- * (+) means here 1.85 V
- * (-) means here GND
- */
-static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc)
-{
-	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
-	mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0);
-
-	lradc->cur_plate = LRADC_SAMPLE_X;
-	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP);
-	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
-}
-
-/*
- *   YP(+)--+-------------+
- *          |             |--+
- *          |             |  |
- *   YM(-)--+-------------+  |
- *            +--------------+
- *            |              |
- *         XP(open)        XM(meas)
- *
- * (+) means here 1.85 V
- * (-) means here GND
- */
-static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc)
-{
-	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
-	mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0);
-
-	lradc->cur_plate = LRADC_SAMPLE_Y;
-	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM);
-	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
-}
-
-/*
- *    YP(+)--+-------------+
- *           |             |--+
- *           |             |  |
- * YM(meas)--+-------------+  |
- *             +--------------+
- *             |              |
- *          XP(meas)        XM(-)
- *
- * (+) means here 1.85 V
- * (-) means here GND
- */
-static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
-{
-	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
-	mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0);
-
-	lradc->cur_plate = LRADC_SAMPLE_PRESSURE;
-	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM);
-	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP);
-	mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2,
-				    TOUCHSCREEN_VCHANNEL1);
-}
-
-static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
-{
-	mxs_lradc_setup_touch_detection(lradc);
-
-	lradc->cur_plate = LRADC_TOUCH;
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ |
-			    LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
-	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
-}
-
-static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc)
-{
-	mxs_lradc_reg_clear(lradc,
-			    LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
-			    LRADC_CTRL1);
-	mxs_lradc_reg_set(lradc,
-			  LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1),
-			  LRADC_CTRL1);
-	/*
-	 * start with the Y-pos, because it uses nearly the same plate
-	 * settings like the touch detection
-	 */
-	mxs_lradc_prepare_y_pos(lradc);
-}
-
-static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc)
-{
-	input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos);
-	input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos);
-	input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure);
-	input_report_key(lradc->ts_input, BTN_TOUCH, 1);
-	input_sync(lradc->ts_input);
-}
-
-static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc)
-{
-	mxs_lradc_setup_touch_detection(lradc);
-	lradc->cur_plate = LRADC_SAMPLE_VALID;
-	/*
-	 * start a dummy conversion to burn time to settle the signals
-	 * note: we are not interested in the conversion's value
-	 */
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1));
-	mxs_lradc_reg_clear(lradc,
-			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
-			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2),
-			    LRADC_CTRL1);
-	mxs_lradc_reg_wrt(
-		    lradc,
-		    LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) |
-		    LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */
-		    LRADC_DELAY(2));
-}
-
-/*
- * in order to avoid false measurements, report only samples where
- * the surface is still touched after the position measurement
- */
-static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid)
-{
-	/* if it is still touched, report the sample */
-	if (valid && mxs_lradc_check_touch_event(lradc)) {
-		lradc->ts_valid = true;
-		mxs_lradc_report_ts_event(lradc);
-	}
-
-	/* if it is even still touched, continue with the next measurement */
-	if (mxs_lradc_check_touch_event(lradc)) {
-		mxs_lradc_prepare_y_pos(lradc);
-		return;
-	}
-
-	if (lradc->ts_valid) {
-		/* signal the release */
-		lradc->ts_valid = false;
-		input_report_key(lradc->ts_input, BTN_TOUCH, 0);
-		input_sync(lradc->ts_input);
-	}
-
-	/* if it is released, wait for the next touch via IRQ */
-	lradc->cur_plate = LRADC_TOUCH;
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
-	mxs_lradc_reg_clear(lradc,
-			    LRADC_CTRL1_TOUCH_DETECT_IRQ |
-			    LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
-			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1),
-			    LRADC_CTRL1);
-	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
-}
-
-/* touchscreen's state machine */
-static void mxs_lradc_handle_touch(struct mxs_lradc *lradc)
-{
-	switch (lradc->cur_plate) {
-	case LRADC_TOUCH:
-		if (mxs_lradc_check_touch_event(lradc))
-			mxs_lradc_start_touch_event(lradc);
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ,
-				    LRADC_CTRL1);
-		return;
-
-	case LRADC_SAMPLE_Y:
-		lradc->ts_y_pos =
-		    mxs_lradc_read_raw_channel(lradc,
-					       TOUCHSCREEN_VCHANNEL1);
-		mxs_lradc_prepare_x_pos(lradc);
-		return;
-
-	case LRADC_SAMPLE_X:
-		lradc->ts_x_pos =
-		    mxs_lradc_read_raw_channel(lradc,
-					       TOUCHSCREEN_VCHANNEL1);
-		mxs_lradc_prepare_pressure(lradc);
-		return;
-
-	case LRADC_SAMPLE_PRESSURE:
-		lradc->ts_pressure =
-		    mxs_lradc_read_ts_pressure(lradc,
-					       TOUCHSCREEN_VCHANNEL2,
-					       TOUCHSCREEN_VCHANNEL1);
-		mxs_lradc_complete_touch_event(lradc);
-		return;
-
-	case LRADC_SAMPLE_VALID:
-		mxs_lradc_finish_touch_event(lradc, 1);
-		break;
-	}
-}
-
-/*
- * Raw I/O operations
- */
-static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
-{
-	struct mxs_lradc *lradc = iio_priv(iio_dev);
-	int ret;
-
-	/*
-	 * See if there is no buffered operation in progress. If there is, simply
-	 * bail out. This can be improved to support both buffered and raw IO at
-	 * the same time, yet the code becomes horribly complicated. Therefore I
-	 * applied KISS principle here.
-	 */
-	ret = mutex_trylock(&lradc->lock);
-	if (!ret)
-		return -EBUSY;
-
-	reinit_completion(&lradc->completion);
-
-	/*
-	 * No buffered operation in progress, map the channel and trigger it.
-	 * Virtual channel 0 is always used here as the others are always not
-	 * used if doing raw sampling.
-	 */
-	if (lradc->soc == IMX28_LRADC)
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0),
-				    LRADC_CTRL1);
-	mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0);
-
-	/* Enable / disable the divider per requirement */
-	if (test_bit(chan, &lradc->is_divided))
-		mxs_lradc_reg_set(lradc,
-				  1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
-				  LRADC_CTRL2);
-	else
-		mxs_lradc_reg_clear(lradc,
-				    1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
-				    LRADC_CTRL2);
-
-	/* Clean the slot's previous content, then set new one. */
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0),
-			    LRADC_CTRL4);
-	mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4);
-
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0));
-
-	/* Enable the IRQ and start sampling the channel. */
-	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
-	mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0);
-
-	/* Wait for completion on the channel, 1 second max. */
-	ret = wait_for_completion_killable_timeout(&lradc->completion, HZ);
-	if (!ret)
-		ret = -ETIMEDOUT;
-	if (ret < 0)
-		goto err;
-
-	/* Read the data. */
-	*val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK;
-	ret = IIO_VAL_INT;
-
-err:
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
-
-	mutex_unlock(&lradc->lock);
-
-	return ret;
-}
-
-static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val)
-{
-	int ret, min, max;
-
-	ret = mxs_lradc_read_single(iio_dev, 8, &min);
-	if (ret != IIO_VAL_INT)
-		return ret;
-
-	ret = mxs_lradc_read_single(iio_dev, 9, &max);
-	if (ret != IIO_VAL_INT)
-		return ret;
-
-	*val = max - min;
-
-	return IIO_VAL_INT;
-}
-
-static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
-			      const struct iio_chan_spec *chan,
-			      int *val, int *val2, long m)
-{
-	struct mxs_lradc *lradc = iio_priv(iio_dev);
-
-	switch (m) {
-	case IIO_CHAN_INFO_RAW:
-		if (chan->type == IIO_TEMP)
-			return mxs_lradc_read_temp(iio_dev, val);
-
-		return mxs_lradc_read_single(iio_dev, chan->channel, val);
-
-	case IIO_CHAN_INFO_SCALE:
-		if (chan->type == IIO_TEMP) {
-			/* From the datasheet, we have to multiply by 1.012 and
-			 * divide by 4
-			 */
-			*val = 0;
-			*val2 = 253000;
-			return IIO_VAL_INT_PLUS_MICRO;
-		}
-
-		*val = lradc->vref_mv[chan->channel];
-		*val2 = chan->scan_type.realbits -
-			test_bit(chan->channel, &lradc->is_divided);
-		return IIO_VAL_FRACTIONAL_LOG2;
-
-	case IIO_CHAN_INFO_OFFSET:
-		if (chan->type == IIO_TEMP) {
-			/* The calculated value from the ADC is in Kelvin, we
-			 * want Celsius for hwmon so the offset is -273.15
-			 * The offset is applied before scaling so it is
-			 * actually -213.15 * 4 / 1.012 = -1079.644268
-			 */
-			*val = -1079;
-			*val2 = 644268;
-
-			return IIO_VAL_INT_PLUS_MICRO;
-		}
-
-		return -EINVAL;
-
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
-static int mxs_lradc_write_raw(struct iio_dev *iio_dev,
-			       const struct iio_chan_spec *chan,
-			       int val, int val2, long m)
-{
-	struct mxs_lradc *lradc = iio_priv(iio_dev);
-	struct mxs_lradc_scale *scale_avail =
-			lradc->scale_avail[chan->channel];
-	int ret;
-
-	ret = mutex_trylock(&lradc->lock);
-	if (!ret)
-		return -EBUSY;
-
-	switch (m) {
-	case IIO_CHAN_INFO_SCALE:
-		ret = -EINVAL;
-		if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer &&
-		    val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) {
-			/* divider by two disabled */
-			clear_bit(chan->channel, &lradc->is_divided);
-			ret = 0;
-		} else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer &&
-			   val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) {
-			/* divider by two enabled */
-			set_bit(chan->channel, &lradc->is_divided);
-			ret = 0;
-		}
-
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	mutex_unlock(&lradc->lock);
-
-	return ret;
-}
-
-static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev,
-				       const struct iio_chan_spec *chan,
-				       long m)
-{
-	return IIO_VAL_INT_PLUS_NANO;
-}
-
-static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev,
-						 struct device_attribute *attr,
-						 char *buf,
-						 int ch)
-{
-	struct iio_dev *iio = dev_to_iio_dev(dev);
-	struct mxs_lradc *lradc = iio_priv(iio);
-	int i, len = 0;
-
-	for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++)
-		len += sprintf(buf + len, "%u.%09u ",
-			       lradc->scale_avail[ch][i].integer,
-			       lradc->scale_avail[ch][i].nano);
-
-	len += sprintf(buf + len, "\n");
-
-	return len;
-}
-
-static ssize_t mxs_lradc_show_scale_available(struct device *dev,
-					      struct device_attribute *attr,
-					      char *buf)
-{
-	struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr);
-
-	return mxs_lradc_show_scale_available_ch(dev, attr, buf,
-						 iio_attr->address);
-}
-
-#define SHOW_SCALE_AVAILABLE_ATTR(ch)					\
-static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO,	\
-		       mxs_lradc_show_scale_available, NULL, ch)
-
-SHOW_SCALE_AVAILABLE_ATTR(0);
-SHOW_SCALE_AVAILABLE_ATTR(1);
-SHOW_SCALE_AVAILABLE_ATTR(2);
-SHOW_SCALE_AVAILABLE_ATTR(3);
-SHOW_SCALE_AVAILABLE_ATTR(4);
-SHOW_SCALE_AVAILABLE_ATTR(5);
-SHOW_SCALE_AVAILABLE_ATTR(6);
-SHOW_SCALE_AVAILABLE_ATTR(7);
-SHOW_SCALE_AVAILABLE_ATTR(10);
-SHOW_SCALE_AVAILABLE_ATTR(11);
-SHOW_SCALE_AVAILABLE_ATTR(12);
-SHOW_SCALE_AVAILABLE_ATTR(13);
-SHOW_SCALE_AVAILABLE_ATTR(14);
-SHOW_SCALE_AVAILABLE_ATTR(15);
-
-static struct attribute *mxs_lradc_attributes[] = {
-	&iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage1_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage2_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage3_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage4_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage5_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage6_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage7_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage10_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage11_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage12_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage13_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage14_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage15_scale_available.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group mxs_lradc_attribute_group = {
-	.attrs = mxs_lradc_attributes,
-};
-
-static const struct iio_info mxs_lradc_iio_info = {
-	.driver_module		= THIS_MODULE,
-	.read_raw		= mxs_lradc_read_raw,
-	.write_raw		= mxs_lradc_write_raw,
-	.write_raw_get_fmt	= mxs_lradc_write_raw_get_fmt,
-	.attrs			= &mxs_lradc_attribute_group,
-};
-
-static int mxs_lradc_ts_open(struct input_dev *dev)
-{
-	struct mxs_lradc *lradc = input_get_drvdata(dev);
-
-	/* Enable the touch-detect circuitry. */
-	mxs_lradc_enable_touch_detection(lradc);
-
-	return 0;
-}
-
-static void mxs_lradc_disable_ts(struct mxs_lradc *lradc)
-{
-	/* stop all interrupts from firing */
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
-		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
-		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
-
-	/* Power-down touchscreen touch-detect circuitry. */
-	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
-}
-
-static void mxs_lradc_ts_close(struct input_dev *dev)
-{
-	struct mxs_lradc *lradc = input_get_drvdata(dev);
-
-	mxs_lradc_disable_ts(lradc);
-}
-
-static int mxs_lradc_ts_register(struct mxs_lradc *lradc)
-{
-	struct input_dev *input;
-	struct device *dev = lradc->dev;
-	int ret;
-
-	if (!lradc->use_touchscreen)
-		return 0;
-
-	input = input_allocate_device();
-	if (!input)
-		return -ENOMEM;
-
-	input->name = DRIVER_NAME;
-	input->id.bustype = BUS_HOST;
-	input->dev.parent = dev;
-	input->open = mxs_lradc_ts_open;
-	input->close = mxs_lradc_ts_close;
-
-	__set_bit(EV_ABS, input->evbit);
-	__set_bit(EV_KEY, input->evbit);
-	__set_bit(BTN_TOUCH, input->keybit);
-	input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
-	input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
-	input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK,
-			     0, 0);
-
-	lradc->ts_input = input;
-	input_set_drvdata(input, lradc);
-	ret = input_register_device(input);
-	if (ret)
-		input_free_device(lradc->ts_input);
-
-	return ret;
-}
-
-static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc)
-{
-	if (!lradc->use_touchscreen)
-		return;
-
-	mxs_lradc_disable_ts(lradc);
-	input_unregister_device(lradc->ts_input);
-}
-
-/*
- * IRQ Handling
- */
-static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
-{
-	struct iio_dev *iio = data;
-	struct mxs_lradc *lradc = iio_priv(iio);
-	unsigned long reg = readl(lradc->base + LRADC_CTRL1);
-	u32 clr_irq = mxs_lradc_irq_mask(lradc);
-	const u32 ts_irq_mask =
-		LRADC_CTRL1_TOUCH_DETECT_IRQ |
-		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
-		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2);
-
-	if (!(reg & mxs_lradc_irq_mask(lradc)))
-		return IRQ_NONE;
-
-	if (lradc->use_touchscreen && (reg & ts_irq_mask)) {
-		mxs_lradc_handle_touch(lradc);
-
-		/* Make sure we don't clear the next conversion's interrupt. */
-		clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
-				LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2));
-	}
-
-	if (iio_buffer_enabled(iio)) {
-		if (reg & lradc->buffer_vchans)
-			iio_trigger_poll(iio->trig);
-	} else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) {
-		complete(&lradc->completion);
-	}
-
-	mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Trigger handling
- */
-static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p)
-{
-	struct iio_poll_func *pf = p;
-	struct iio_dev *iio = pf->indio_dev;
-	struct mxs_lradc *lradc = iio_priv(iio);
-	const u32 chan_value = LRADC_CH_ACCUMULATE |
-		((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
-	unsigned int i, j = 0;
-
-	for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
-		lradc->buffer[j] = readl(lradc->base + LRADC_CH(j));
-		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j));
-		lradc->buffer[j] &= LRADC_CH_VALUE_MASK;
-		lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP;
-		j++;
-	}
-
-	iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp);
-
-	iio_trigger_notify_done(iio->trig);
-
-	return IRQ_HANDLED;
-}
-
-static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state)
-{
-	struct iio_dev *iio = iio_trigger_get_drvdata(trig);
-	struct mxs_lradc *lradc = iio_priv(iio);
-	const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR;
-
-	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st);
-
-	return 0;
-}
-
-static const struct iio_trigger_ops mxs_lradc_trigger_ops = {
-	.owner = THIS_MODULE,
-	.set_trigger_state = &mxs_lradc_configure_trigger,
-};
-
-static int mxs_lradc_trigger_init(struct iio_dev *iio)
-{
-	int ret;
-	struct iio_trigger *trig;
-	struct mxs_lradc *lradc = iio_priv(iio);
-
-	trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id);
-	if (!trig)
-		return -ENOMEM;
-
-	trig->dev.parent = lradc->dev;
-	iio_trigger_set_drvdata(trig, iio);
-	trig->ops = &mxs_lradc_trigger_ops;
-
-	ret = iio_trigger_register(trig);
-	if (ret) {
-		iio_trigger_free(trig);
-		return ret;
-	}
-
-	lradc->trig = trig;
-
-	return 0;
-}
-
-static void mxs_lradc_trigger_remove(struct iio_dev *iio)
-{
-	struct mxs_lradc *lradc = iio_priv(iio);
-
-	iio_trigger_unregister(lradc->trig);
-	iio_trigger_free(lradc->trig);
-}
-
-static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
-{
-	struct mxs_lradc *lradc = iio_priv(iio);
-	int ret = 0, chan, ofs = 0;
-	unsigned long enable = 0;
-	u32 ctrl4_set = 0;
-	u32 ctrl4_clr = 0;
-	u32 ctrl1_irq = 0;
-	const u32 chan_value = LRADC_CH_ACCUMULATE |
-		((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
-	const int len = bitmap_weight(iio->active_scan_mask,
-			LRADC_MAX_TOTAL_CHANS);
-
-	if (!len)
-		return -EINVAL;
-
-	/*
-	 * Lock the driver so raw access can not be done during buffered
-	 * operation. This simplifies the code a lot.
-	 */
-	ret = mutex_trylock(&lradc->lock);
-	if (!ret)
-		return -EBUSY;
-
-	lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL);
-	if (!lradc->buffer) {
-		ret = -ENOMEM;
-		goto err_mem;
-	}
-
-	if (lradc->soc == IMX28_LRADC)
-		mxs_lradc_reg_clear(
-			lradc,
-			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
-			LRADC_CTRL1);
-	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
-
-	for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
-		ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
-		ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs);
-		ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs);
-		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs));
-		bitmap_set(&enable, ofs, 1);
-		ofs++;
-	}
-
-	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
-			    LRADC_DELAY_KICK, LRADC_DELAY(0));
-	mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4);
-	mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4);
-	mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1);
-	mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET,
-			  LRADC_DELAY(0));
-
-	return 0;
-
-err_mem:
-	mutex_unlock(&lradc->lock);
-	return ret;
-}
-
-static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
-{
-	struct mxs_lradc *lradc = iio_priv(iio);
-
-	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
-			    LRADC_DELAY_KICK, LRADC_DELAY(0));
-
-	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
-	if (lradc->soc == IMX28_LRADC)
-		mxs_lradc_reg_clear(
-			lradc,
-			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
-			LRADC_CTRL1);
-
-	kfree(lradc->buffer);
-	mutex_unlock(&lradc->lock);
-
-	return 0;
-}
-
-static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio,
-					 const unsigned long *mask)
-{
-	struct mxs_lradc *lradc = iio_priv(iio);
-	const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS);
-	int rsvd_chans = 0;
-	unsigned long rsvd_mask = 0;
-
-	if (lradc->use_touchbutton)
-		rsvd_mask |= CHAN_MASK_TOUCHBUTTON;
-	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE)
-		rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE;
-	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
-		rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE;
-
-	if (lradc->use_touchbutton)
-		rsvd_chans++;
-	if (lradc->use_touchscreen)
-		rsvd_chans += 2;
-
-	/* Test for attempts to map channels with special mode of operation. */
-	if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS))
-		return false;
-
-	/* Test for attempts to map more channels then available slots. */
-	if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS)
-		return false;
-
-	return true;
-}
-
-static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = {
-	.preenable = &mxs_lradc_buffer_preenable,
-	.postenable = &iio_triggered_buffer_postenable,
-	.predisable = &iio_triggered_buffer_predisable,
-	.postdisable = &mxs_lradc_buffer_postdisable,
-	.validate_scan_mask = &mxs_lradc_validate_scan_mask,
-};
-
-/*
- * Driver initialization
- */
-
-#define MXS_ADC_CHAN(idx, chan_type, name) {			\
-	.type = (chan_type),					\
-	.indexed = 1,						\
-	.scan_index = (idx),					\
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
-			      BIT(IIO_CHAN_INFO_SCALE),		\
-	.channel = (idx),					\
-	.address = (idx),					\
-	.scan_type = {						\
-		.sign = 'u',					\
-		.realbits = LRADC_RESOLUTION,			\
-		.storagebits = 32,				\
-	},							\
-	.datasheet_name = (name),				\
-}
-
-static const struct iio_chan_spec mx23_lradc_chan_spec[] = {
-	MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"),
-	MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"),
-	MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"),
-	MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"),
-	MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"),
-	MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"),
-	MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"),
-	MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"),
-	/* Combined Temperature sensors */
-	{
-		.type = IIO_TEMP,
-		.indexed = 1,
-		.scan_index = 8,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-				      BIT(IIO_CHAN_INFO_OFFSET) |
-				      BIT(IIO_CHAN_INFO_SCALE),
-		.channel = 8,
-		.scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
-		.datasheet_name = "TEMP_DIE",
-	},
-	/* Hidden channel to keep indexes */
-	{
-		.type = IIO_TEMP,
-		.indexed = 1,
-		.scan_index = -1,
-		.channel = 9,
-	},
-	MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL),
-	MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL),
-	MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"),
-	MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"),
-	MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"),
-	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
-};
-
-static const struct iio_chan_spec mx28_lradc_chan_spec[] = {
-	MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"),
-	MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"),
-	MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"),
-	MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"),
-	MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"),
-	MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"),
-	MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"),
-	MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"),
-	/* Combined Temperature sensors */
-	{
-		.type = IIO_TEMP,
-		.indexed = 1,
-		.scan_index = 8,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-				      BIT(IIO_CHAN_INFO_OFFSET) |
-				      BIT(IIO_CHAN_INFO_SCALE),
-		.channel = 8,
-		.scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
-		.datasheet_name = "TEMP_DIE",
-	},
-	/* Hidden channel to keep indexes */
-	{
-		.type = IIO_TEMP,
-		.indexed = 1,
-		.scan_index = -1,
-		.channel = 9,
-	},
-	MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"),
-	MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"),
-	MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"),
-	MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"),
-	MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"),
-	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
-};
-
-static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
-{
-	/* The ADC always uses DELAY CHANNEL 0. */
-	const u32 adc_cfg =
-		(1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) |
-		(LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET);
-
-	int ret = stmp_reset_block(lradc->base);
-
-	if (ret)
-		return ret;
-
-	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
-	mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0));
-
-	/* Disable remaining DELAY CHANNELs */
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1));
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
-
-	/* Configure the touchscreen type */
-	if (lradc->soc == IMX28_LRADC) {
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-				    LRADC_CTRL0);
-
-	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
-		mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-				  LRADC_CTRL0);
-	}
-
-	/* Start internal temperature sensing. */
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);
-
-	return 0;
-}
-
-static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
-{
-	int i;
-
-	mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1);
-
-	for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++)
-		mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i));
-}
-
-static const struct of_device_id mxs_lradc_dt_ids[] = {
-	{ .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
-	{ .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
-
-static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc,
-				       struct device_node *lradc_node)
-{
-	int ret;
-	u32 ts_wires = 0, adapt;
-
-	ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires",
-				   &ts_wires);
-	if (ret)
-		return -ENODEV; /* touchscreen feature disabled */
-
-	switch (ts_wires) {
-	case 4:
-		lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
-		break;
-	case 5:
-		if (lradc->soc == IMX28_LRADC) {
-			lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
-			break;
-		}
-		/* fall through an error message for i.MX23 */
-	default:
-		dev_err(lradc->dev,
-			"Unsupported number of touchscreen wires (%d)\n",
-			ts_wires);
-		return -EINVAL;
-	}
-
-	if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) {
-		lradc->over_sample_cnt = 4;
-	} else {
-		if (adapt < 1 || adapt > 32) {
-			dev_err(lradc->dev, "Invalid sample count (%u)\n",
-				adapt);
-			return -EINVAL;
-		}
-		lradc->over_sample_cnt = adapt;
-	}
-
-	if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) {
-		lradc->over_sample_delay = 2;
-	} else {
-		if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) {
-			dev_err(lradc->dev, "Invalid sample delay (%u)\n",
-				adapt);
-			return -EINVAL;
-		}
-		lradc->over_sample_delay = adapt;
-	}
-
-	if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) {
-		lradc->settling_delay = 10;
-	} else {
-		if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) {
-			dev_err(lradc->dev, "Invalid settling delay (%u)\n",
-				adapt);
-			return -EINVAL;
-		}
-		lradc->settling_delay = adapt;
-	}
-
-	return 0;
-}
-
-static int mxs_lradc_probe(struct platform_device *pdev)
-{
-	const struct of_device_id *of_id =
-		of_match_device(mxs_lradc_dt_ids, &pdev->dev);
-	const struct mxs_lradc_of_config *of_cfg =
-		&mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data];
-	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
-	struct mxs_lradc *lradc;
-	struct iio_dev *iio;
-	struct resource *iores;
-	int ret = 0, touch_ret;
-	int i, s;
-	u64 scale_uv;
-
-	/* Allocate the IIO device. */
-	iio = devm_iio_device_alloc(dev, sizeof(*lradc));
-	if (!iio) {
-		dev_err(dev, "Failed to allocate IIO device\n");
-		return -ENOMEM;
-	}
-
-	lradc = iio_priv(iio);
-	lradc->soc = (enum mxs_lradc_id)of_id->data;
-
-	/* Grab the memory area */
-	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	lradc->dev = &pdev->dev;
-	lradc->base = devm_ioremap_resource(dev, iores);
-	if (IS_ERR(lradc->base))
-		return PTR_ERR(lradc->base);
-
-	lradc->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(lradc->clk)) {
-		dev_err(dev, "Failed to get the delay unit clock\n");
-		return PTR_ERR(lradc->clk);
-	}
-	ret = clk_prepare_enable(lradc->clk);
-	if (ret != 0) {
-		dev_err(dev, "Failed to enable the delay unit clock\n");
-		return ret;
-	}
-
-	touch_ret = mxs_lradc_probe_touchscreen(lradc, node);
-
-	if (touch_ret == 0)
-		lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
-	else
-		lradc->buffer_vchans = BUFFER_VCHANS_ALL;
-
-	/* Grab all IRQ sources */
-	for (i = 0; i < of_cfg->irq_count; i++) {
-		lradc->irq[i] = platform_get_irq(pdev, i);
-		if (lradc->irq[i] < 0) {
-			ret = lradc->irq[i];
-			goto err_clk;
-		}
-
-		ret = devm_request_irq(dev, lradc->irq[i],
-				       mxs_lradc_handle_irq, 0,
-				       of_cfg->irq_name[i], iio);
-		if (ret)
-			goto err_clk;
-	}
-
-	lradc->vref_mv = of_cfg->vref_mv;
-
-	platform_set_drvdata(pdev, iio);
-
-	init_completion(&lradc->completion);
-	mutex_init(&lradc->lock);
-
-	iio->name = pdev->name;
-	iio->dev.parent = &pdev->dev;
-	iio->info = &mxs_lradc_iio_info;
-	iio->modes = INDIO_DIRECT_MODE;
-	iio->masklength = LRADC_MAX_TOTAL_CHANS;
-
-	if (lradc->soc == IMX23_LRADC) {
-		iio->channels = mx23_lradc_chan_spec;
-		iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec);
-	} else {
-		iio->channels = mx28_lradc_chan_spec;
-		iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec);
-	}
-
-	ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time,
-					 &mxs_lradc_trigger_handler,
-					 &mxs_lradc_buffer_ops);
-	if (ret)
-		goto err_clk;
-
-	ret = mxs_lradc_trigger_init(iio);
-	if (ret)
-		goto err_trig;
-
-	/* Populate available ADC input ranges */
-	for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) {
-		for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) {
-			/*
-			 * [s=0] = optional divider by two disabled (default)
-			 * [s=1] = optional divider by two enabled
-			 *
-			 * The scale is calculated by doing:
-			 *   Vref >> (realbits - s)
-			 * which multiplies by two on the second component
-			 * of the array.
-			 */
-			scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >>
-				   (LRADC_RESOLUTION - s);
-			lradc->scale_avail[i][s].nano =
-					do_div(scale_uv, 100000000) * 10;
-			lradc->scale_avail[i][s].integer = scale_uv;
-		}
-	}
-
-	/* Configure the hardware. */
-	ret = mxs_lradc_hw_init(lradc);
-	if (ret)
-		goto err_dev;
-
-	/* Register the touchscreen input device. */
-	if (touch_ret == 0) {
-		ret = mxs_lradc_ts_register(lradc);
-		if (ret)
-			goto err_ts_register;
-	}
-
-	/* Register IIO device. */
-	ret = iio_device_register(iio);
-	if (ret) {
-		dev_err(dev, "Failed to register IIO device\n");
-		goto err_ts;
-	}
-
-	return 0;
-
-err_ts:
-	mxs_lradc_ts_unregister(lradc);
-err_ts_register:
-	mxs_lradc_hw_stop(lradc);
-err_dev:
-	mxs_lradc_trigger_remove(iio);
-err_trig:
-	iio_triggered_buffer_cleanup(iio);
-err_clk:
-	clk_disable_unprepare(lradc->clk);
-	return ret;
-}
-
-static int mxs_lradc_remove(struct platform_device *pdev)
-{
-	struct iio_dev *iio = platform_get_drvdata(pdev);
-	struct mxs_lradc *lradc = iio_priv(iio);
-
-	iio_device_unregister(iio);
-	mxs_lradc_ts_unregister(lradc);
-	mxs_lradc_hw_stop(lradc);
-	mxs_lradc_trigger_remove(iio);
-	iio_triggered_buffer_cleanup(iio);
-
-	clk_disable_unprepare(lradc->clk);
-	return 0;
-}
-
-static struct platform_driver mxs_lradc_driver = {
-	.driver	= {
-		.name	= DRIVER_NAME,
-		.of_match_table = mxs_lradc_dt_ids,
-	},
-	.probe	= mxs_lradc_probe,
-	.remove	= mxs_lradc_remove,
-};
-
-module_platform_driver(mxs_lradc_driver);
-
-MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
-MODULE_DESCRIPTION("Freescale MXS LRADC driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c
index 712cae0e8608..f2c006572783 100644
--- a/drivers/staging/iio/adc/spear_adc.c
+++ b/drivers/staging/iio/adc/spear_adc.c
@@ -288,7 +288,7 @@ static int spear_adc_probe(struct platform_device *pdev)
 	st->adc_base_spear3xx =
 		(struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx;
 
-	st->clk = clk_get(dev, NULL);
+	st->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(st->clk)) {
 		dev_err(dev, "failed getting clock\n");
 		goto errout1;
@@ -297,28 +297,28 @@ static int spear_adc_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(st->clk);
 	if (ret) {
 		dev_err(dev, "failed enabling clock\n");
-		goto errout2;
+		goto errout1;
 	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
 		dev_err(dev, "failed getting interrupt resource\n");
 		ret = -EINVAL;
-		goto errout3;
+		goto errout2;
 	}
 
 	ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME,
 			       st);
 	if (ret < 0) {
 		dev_err(dev, "failed requesting interrupt\n");
-		goto errout3;
+		goto errout2;
 	}
 
 	if (of_property_read_u32(np, "sampling-frequency",
 				 &st->sampling_freq)) {
 		dev_err(dev, "sampling-frequency missing in DT\n");
 		ret = -EINVAL;
-		goto errout3;
+		goto errout2;
 	}
 
 	/*
@@ -348,16 +348,14 @@ static int spear_adc_probe(struct platform_device *pdev)
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto errout3;
+		goto errout2;
 
 	dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
 
 	return 0;
 
-errout3:
-	clk_disable_unprepare(st->clk);
 errout2:
-	clk_put(st->clk);
+	clk_disable_unprepare(st->clk);
 errout1:
 	iounmap(st->adc_base_spear6xx);
 	return ret;
@@ -370,7 +368,6 @@ static int spear_adc_remove(struct platform_device *pdev)
 
 	iio_device_unregister(indio_dev);
 	clk_disable_unprepare(st->clk);
-	clk_put(st->clk);
 	iounmap(st->adc_base_spear6xx);
 
 	return 0;
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index 10c43dda0f5a..d1218d896725 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -558,7 +558,7 @@ out:
 }
 
 static const struct iio_info ad5933_info = {
-	.read_raw = &ad5933_read_raw,
+	.read_raw = ad5933_read_raw,
 	.attrs = &ad5933_attribute_group,
 	.driver_module = THIS_MODULE,
 };
@@ -616,9 +616,9 @@ static int ad5933_ring_postdisable(struct iio_dev *indio_dev)
 }
 
 static const struct iio_buffer_setup_ops ad5933_ring_setup_ops = {
-	.preenable = &ad5933_ring_preenable,
-	.postenable = &ad5933_ring_postenable,
-	.postdisable = &ad5933_ring_postdisable,
+	.preenable = ad5933_ring_preenable,
+	.postenable = ad5933_ring_postenable,
+	.postdisable = ad5933_ring_postdisable,
 };
 
 static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/magnetometer/hmc5843.h b/drivers/staging/iio/magnetometer/hmc5843.h
index 06f35d3828e4..76a5d7484d8d 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.h
+++ b/drivers/staging/iio/magnetometer/hmc5843.h
@@ -7,8 +7,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * */
+ */
 
 #ifndef HMC5843_CORE_H
 #define HMC5843_CORE_H
@@ -38,7 +37,7 @@ enum hmc5843_ids {
  * @regmap:		hardware access register maps
  * @variant:		describe chip variants
  * @buffer:		3x 16-bit channels + padding + 64-bit timestamp
- **/
+ */
 struct hmc5843_data {
 	struct device *dev;
 	struct mutex lock;
diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
index 394bc141a1b0..94897993793e 100644
--- a/drivers/staging/iio/magnetometer/hmc5843_core.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
@@ -565,14 +565,14 @@ static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
 int hmc5843_common_suspend(struct device *dev)
 {
 	return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
-			HMC5843_MODE_CONVERSION_CONTINUOUS);
+				HMC5843_MODE_SLEEP);
 }
 EXPORT_SYMBOL(hmc5843_common_suspend);
 
 int hmc5843_common_resume(struct device *dev)
 {
 	return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
-				HMC5843_MODE_SLEEP);
+		HMC5843_MODE_CONVERSION_CONTINUOUS);
 }
 EXPORT_SYMBOL(hmc5843_common_resume);
 
diff --git a/drivers/staging/iio/magnetometer/hmc5843_i2c.c b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
index 3e06ceb32059..3de7f4426ac4 100644
--- a/drivers/staging/iio/magnetometer/hmc5843_i2c.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_i2c.c
@@ -7,8 +7,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * */
+ */
 
 #include <linux/module.h>
 #include <linux/i2c.h>
diff --git a/drivers/staging/iio/magnetometer/hmc5843_spi.c b/drivers/staging/iio/magnetometer/hmc5843_spi.c
index 8be198058ea2..535f03a70d63 100644
--- a/drivers/staging/iio/magnetometer/hmc5843_spi.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_spi.c
@@ -6,8 +6,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * */
+ */
 
 #include <linux/module.h>
 #include <linux/spi/spi.h>