Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/staging/bcm/headers.h
	drivers/staging/brcm80211/brcmfmac/dhd_linux.c
	drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
	drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
	drivers/staging/et131x/et131x_netdev.c
	drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
	drivers/staging/rtl8192e/r8192E.h
	drivers/staging/usbip/userspace/src/utils.h

21 files changed, 361 insertions, 374 deletions

diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index 499b7a90e941..32ee39ad00df 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -6205,6 +6205,7 @@ int ar6000_create_ap_interface(struct ar6_softc *ar, char *ap_ifname)
     
     ether_setup(dev);
     init_netdev(dev, ap_ifname);
+    dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 
     if (register_netdev(dev)) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: register_netdev failed\n"));
diff --git a/drivers/staging/bcm/headers.h b/drivers/staging/bcm/headers.h
index 8fe8d2b1f627..947d06325681 100644
--- a/drivers/staging/bcm/headers.h
+++ b/drivers/staging/bcm/headers.h
@@ -23,7 +23,6 @@
 #include <linux/wait.h>
 #include <linux/proc_fs.h>
 #include <linux/interrupt.h>
-#include <linux/version.h>
 #include <linux/stddef.h>
 #include <linux/stat.h>
 #include <linux/fcntl.h>
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
index 9f944ae4d601..05dada98eb6b 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
@@ -30,138 +30,17 @@
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/hardirq.h>
-#include <bcmdefs.h>
-#include <bcmutils.h>
-
-#include <dngl_stats.h>
-#include <dhd.h>
-#include <dhd_bus.h>
-#include <dhd_proto.h>
-#include <dhd_dbg.h>
-
-#include <wl_cfg80211.h>
-
-#define EPI_VERSION_STR		"4.218.248.5"
-#define ETH_P_BRCM			0x886c
-
-#if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC)
-#include <linux/wifi_tiwlan.h>
-
-struct semaphore wifi_control_sem;
-
-struct dhd_bus *g_bus;
-
-static struct wifi_platform_data *wifi_control_data;
-static struct resource *wifi_irqres;
-
-int wifi_get_irq_number(unsigned long *irq_flags_ptr)
-{
-	if (wifi_irqres) {
-		*irq_flags_ptr = wifi_irqres->flags & IRQF_TRIGGER_MASK;
-		return (int)wifi_irqres->start;
-	}
-#ifdef CUSTOM_OOB_GPIO_NUM
-	return CUSTOM_OOB_GPIO_NUM;
-#else
-	return -1;
-#endif
-}
-
-int wifi_set_carddetect(int on)
-{
-	printk(KERN_ERR "%s = %d\n", __func__, on);
-	if (wifi_control_data && wifi_control_data->set_carddetect)
-		wifi_control_data->set_carddetect(on);
-	return 0;
-}
-
-int wifi_set_power(int on, unsigned long msec)
-{
-	printk(KERN_ERR "%s = %d\n", __func__, on);
-	if (wifi_control_data && wifi_control_data->set_power)
-		wifi_control_data->set_power(on);
-	if (msec)
-		mdelay(msec);
-	return 0;
-}
-
-int wifi_set_reset(int on, unsigned long msec)
-{
-	printk(KERN_ERR "%s = %d\n", __func__, on);
-	if (wifi_control_data && wifi_control_data->set_reset)
-		wifi_control_data->set_reset(on);
-	if (msec)
-		mdelay(msec);
-	return 0;
-}
-
-static int wifi_probe(struct platform_device *pdev)
-{
-	struct wifi_platform_data *wifi_ctrl =
-	    (struct wifi_platform_data *)(pdev->dev.platform_data);
-
-	printk(KERN_ERR "## %s\n", __func__);
-	wifi_irqres =
-	    platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-					 "bcm4329_wlan_irq");
-	wifi_control_data = wifi_ctrl;
-
-	wifi_set_power(1, 0);	/* Power On */
-	wifi_set_carddetect(1);	/* CardDetect (0->1) */
-
-	up(&wifi_control_sem);
-	return 0;
-}
-
-static int wifi_remove(struct platform_device *pdev)
-{
-	struct wifi_platform_data *wifi_ctrl =
-	    (struct wifi_platform_data *)(pdev->dev.platform_data);
-
-	printk(KERN_ERR "## %s\n", __func__);
-	wifi_control_data = wifi_ctrl;
-
-	wifi_set_carddetect(0);	/* CardDetect (1->0) */
-	wifi_set_power(0, 0);	/* Power Off */
-
-	up(&wifi_control_sem);
-	return 0;
-}
-
-static int wifi_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	DHD_TRACE(("##> %s\n", __func__));
-	return 0;
-}
-
-static int wifi_resume(struct platform_device *pdev)
-{
-	DHD_TRACE(("##> %s\n", __func__));
-	return 0;
-}
-
-static struct platform_driver wifi_device = {
-	.probe = wifi_probe,
-	.remove = wifi_remove,
-	.suspend = wifi_suspend,
-	.resume = wifi_resume,
-	.driver = {
-		   .name = KBUILD_MODNAME,
-		   }
-};
-
-int wifi_add_dev(void)
-{
-	DHD_TRACE(("## Calling platform_driver_register\n"));
-	return platform_driver_register(&wifi_device);
-}
-
-void wifi_del_dev(void)
-{
-	DHD_TRACE(("## Unregister platform_driver_register\n"));
-	platform_driver_unregister(&wifi_device);
-}
-#endif	/* defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC) */
+#include <net/cfg80211.h>
+#include <defs.h>
+#include <brcmu_utils.h>
+#include <brcmu_wifi.h>
+
+#include "dhd.h"
+#include "dhd_bus.h"
+#include "dhd_proto.h"
+#include "dhd_dbg.h"
+#include "wl_cfg80211.h"
+#include "bcmchip.h"
 
 #if defined(CONFIG_PM_SLEEP)
 #include <linux/suspend.h>
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index de6476f27553..7fa95b6213c5 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -20,39 +20,92 @@
 #include <linux/printk.h>
 #include <linux/pci_ids.h>
 #include <linux/netdevice.h>
-#include <bcmdefs.h>
-#include <bcmsdh.h>
-
-#ifdef BCMEMBEDIMAGE
-#include BCMEMBEDIMAGE
-#endif				/* BCMEMBEDIMAGE */
-
-#include <bcmutils.h>
-#include <bcmdevs.h>
-
-#include <hndsoc.h>
-#ifdef DHD_DEBUG
-#include <hndrte_armtrap.h>
-#include <hndrte_cons.h>
-#endif				/* DHD_DEBUG */
-#include <sbchipc.h>
-#include <sbhnddma.h>
-
-#include <sdio.h>
-#include <sbsdio.h>
-#include <sbsdpcmdev.h>
-#include <bcmsdpcm.h>
-
-#include <proto/802.11.h>
-
-#include <dngl_stats.h>
-#include <dhd.h>
-#include <dhd_bus.h>
-#include <dhd_proto.h>
-#include <dhd_dbg.h>
-#include <dhdioctl.h>
-#include <sdiovar.h>
-#include <bcmchip.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/semaphore.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <defs.h>
+#include <brcmu_wifi.h>
+#include <brcmu_utils.h>
+#include <brcm_hw_ids.h>
+#include <soc.h>
+#include "sdio_host.h"
+
+/* register access macros */
+#ifndef __BIG_ENDIAN
+#ifndef __mips__
+#define R_REG(r, typ) \
+	brcmf_sdcard_reg_read(NULL, (r), sizeof(typ))
+#else				/* __mips__ */
+#define R_REG(r, typ) \
+	({ \
+		__typeof(*(r)) __osl_v; \
+		__asm__ __volatile__("sync"); \
+		__osl_v = brcmf_sdcard_reg_read(NULL, (r),\
+					  sizeof(typ)); \
+		__asm__ __volatile__("sync"); \
+		__osl_v; \
+	})
+#endif				/* __mips__ */
+
+#else				/* __BIG_ENDIAN */
+#define R_REG(r, typ) \
+	brcmf_sdcard_reg_read(NULL, (r), sizeof(typ))
+#endif				/* __BIG_ENDIAN */
+
+#define OR_REG(r, v, typ) \
+	brcmf_sdcard_reg_write(NULL, (r), sizeof(typ), R_REG(r, typ) | (v))
+
+#ifdef BCMDBG
+
+/* ARM trap handling */
+
+/* Trap types defined by ARM (see arminc.h) */
+
+#if defined(__ARM_ARCH_4T__)
+#define	MAX_TRAP_TYPE	(TR_FIQ + 1)
+#elif defined(__ARM_ARCH_7M__)
+#define	MAX_TRAP_TYPE	(TR_ISR + ARMCM3_NUMINTS)
+#endif				/* __ARM_ARCH_7M__ */
+
+/* The trap structure is defined here as offsets for assembly */
+#define	TR_TYPE		0x00
+#define	TR_EPC		0x04
+#define	TR_CPSR		0x08
+#define	TR_SPSR		0x0c
+#define	TR_REGS		0x10
+#define	TR_REG(n)	(TR_REGS + (n) * 4)
+#define	TR_SP		TR_REG(13)
+#define	TR_LR		TR_REG(14)
+#define	TR_PC		TR_REG(15)
+
+#define	TRAP_T_SIZE	80
+
+struct brcmf_trap {
+	u32 type;
+	u32 epc;
+	u32 cpsr;
+	u32 spsr;
+	u32 r0;
+	u32 r1;
+	u32 r2;
+	u32 r3;
+	u32 r4;
+	u32 r5;
+	u32 r6;
+	u32 r7;
+	u32 r8;
+	u32 r9;
+	u32 r10;
+	u32 r11;
+	u32 r12;
+	u32 r13;
+	u32 r14;
+	u32 pc;
+};
 
 #define CBUF_LEN	(128)
 
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
index 74b1e38398ad..f26d08793ca8 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
@@ -17,15 +17,11 @@
 #ifndef _wl_cfg80211_h_
 #define _wl_cfg80211_h_
 
-#include <linux/wireless.h>
-#include <net/cfg80211.h>
-#include <wlioctl.h>
-
-struct wl_conf;
-struct wl_iface;
-struct wl_priv;
-struct wl_security;
-struct wl_ibss;
+struct brcmf_cfg80211_conf;
+struct brcmf_cfg80211_iface;
+struct brcmf_cfg80211_priv;
+struct brcmf_cfg80211_security;
+struct brcmf_cfg80211_ibss;
 
 #define WL_DBG_NONE		0
 #define WL_DBG_CONN		(1 << 5)
diff --git a/drivers/staging/brcm80211/brcmsmac/mac80211_if.h b/drivers/staging/brcm80211/brcmsmac/mac80211_if.h
index 5711e7c16b50..40e3d375ea99 100644
--- a/drivers/staging/brcm80211/brcmsmac/mac80211_if.h
+++ b/drivers/staging/brcm80211/brcmsmac/mac80211_if.h
@@ -24,8 +24,6 @@
 #define BRCMS_SET_SHORTSLOT_OVERRIDE		146
 
 
-#include <linux/interrupt.h>
-
 /* BMAC Note: High-only driver is no longer working in softirq context as it needs to block and
  * sleep so perimeter lock has to be a semaphore instead of spinlock. This requires timers to be
  * submitted to workqueue instead of being on kernel timer
diff --git a/drivers/staging/cxd2099/Kconfig b/drivers/staging/cxd2099/Kconfig
index 9d638c30735d..b48aefddc84c 100644
--- a/drivers/staging/cxd2099/Kconfig
+++ b/drivers/staging/cxd2099/Kconfig
@@ -1,9 +1,10 @@
 config DVB_CXD2099
-        tristate "CXD2099AR Common Interface driver"
-        depends on DVB_CORE && PCI && I2C && DVB_NGENE
-        ---help---
-          Support for the CI module found on cineS2 DVB-S2, supported by
-	  the Micronas PCIe device driver (ngene).
+	tristate "CXD2099AR Common Interface driver"
+	depends on DVB_CORE && PCI && I2C
+	---help---
+	  Support for the CI module found on cards based on
+	  - Micronas ngene PCIe bridge: cineS2 etc.
+	  - Digital Devices PCIe bridge: Octopus series
 
 	  For now, data is passed through '/dev/dvb/adapterX/sec0':
 	    - Encrypted data must be written to 'sec0'.
diff --git a/drivers/staging/cxd2099/cxd2099.c b/drivers/staging/cxd2099/cxd2099.c
index 55b1c4a59035..1c04185bcfd7 100644
--- a/drivers/staging/cxd2099/cxd2099.c
+++ b/drivers/staging/cxd2099/cxd2099.c
@@ -1,7 +1,7 @@
 /*
  * cxd2099.c: Driver for the CXD2099AR Common Interface Controller
  *
- * Copyright (C) 2010 DigitalDevices UG
+ * Copyright (C) 2010-2011 Digital Devices GmbH
  *
  *
  * This program is free software; you can redistribute it and/or
@@ -41,13 +41,13 @@ struct cxd {
 	struct dvb_ca_en50221 en;
 
 	struct i2c_adapter *i2c;
-	u8     adr;
+	struct cxd2099_cfg cfg;
+
 	u8     regs[0x23];
 	u8     lastaddress;
 	u8     clk_reg_f;
 	u8     clk_reg_b;
 	int    mode;
-	u32    bitrate;
 	int    ready;
 	int    dr;
 	int    slot_stat;
@@ -89,9 +89,9 @@ static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr,
 			u8 reg, u8 *val)
 {
 	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf = &reg, .len = 1 },
+				   .buf = &reg, .len = 1},
 				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf = val, .len = 1 } };
+				   .buf = val, .len = 1} };
 
 	if (i2c_transfer(adapter, msgs, 2) != 2) {
 		printk(KERN_ERR "error in i2c_read_reg\n");
@@ -104,9 +104,9 @@ static int i2c_read(struct i2c_adapter *adapter, u8 adr,
 		    u8 reg, u8 *data, u8 n)
 {
 	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf = &reg, .len = 1 },
-				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf = data, .len = n } };
+				 .buf = &reg, .len = 1},
+				{.addr = adr, .flags = I2C_M_RD,
+				 .buf = data, .len = n} };
 
 	if (i2c_transfer(adapter, msgs, 2) != 2) {
 		printk(KERN_ERR "error in i2c_read\n");
@@ -119,10 +119,10 @@ static int read_block(struct cxd *ci, u8 adr, u8 *data, u8 n)
 {
 	int status;
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
 	if (!status) {
 		ci->lastaddress = adr;
-		status = i2c_read(ci->i2c, ci->adr, 1, data, n);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 1, data, n);
 	}
 	return status;
 }
@@ -136,24 +136,24 @@ static int read_reg(struct cxd *ci, u8 reg, u8 *val)
 static int read_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_read(ci->i2c, ci->adr, 3, data, n);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
 	return status;
 }
 
 static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status) {
 		u8 buf[256] = {3};
 		memcpy(buf+1, data, n);
-		status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n+1);
 	}
 	return status;
 }
@@ -161,39 +161,64 @@ static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 static int read_io(struct cxd *ci, u16 address, u8 *val)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_read(ci->i2c, ci->adr, 3, val, 1);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, val, 1);
 	return status;
 }
 
 static int write_io(struct cxd *ci, u16 address, u8 val)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
-	u8 buf[2] = { 3, val };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
+	u8 buf[2] = {3, val};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_write(ci->i2c, ci->adr, buf, 2);
-
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, 2);
 	return status;
 }
 
+#if 0
+static int read_io_data(struct cxd *ci, u8 *data, u8 n)
+{
+	int status;
+	u8 addr[3] = { 2, 0, 0 };
+
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
+	if (!status)
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
+	return 0;
+}
+
+static int write_io_data(struct cxd *ci, u8 *data, u8 n)
+{
+	int status;
+	u8 addr[3] = {2, 0, 0};
+
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
+	if (!status) {
+		u8 buf[256] = {3};
+		memcpy(buf+1, data, n);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
+	}
+	return 0;
+}
+#endif
 
 static int write_regm(struct cxd *ci, u8 reg, u8 val, u8 mask)
 {
 	int status;
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, reg);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, reg);
 	if (!status && reg >= 6 && reg <= 8 && mask != 0xff)
-		status = i2c_read_reg(ci->i2c, ci->adr, 1, &ci->regs[reg]);
-	ci->regs[reg] = (ci->regs[reg]&(~mask))|val;
+		status = i2c_read_reg(ci->i2c, ci->cfg.adr, 1, &ci->regs[reg]);
+	ci->regs[reg] = (ci->regs[reg] & (~mask)) | val;
 	if (!status) {
 		ci->lastaddress = reg;
-		status = i2c_write_reg(ci->i2c, ci->adr, 1, ci->regs[reg]);
+		status = i2c_write_reg(ci->i2c, ci->cfg.adr, 1, ci->regs[reg]);
 	}
 	if (reg == 0x20)
 		ci->regs[reg] &= 0x7f;
@@ -211,11 +236,11 @@ static int write_block(struct cxd *ci, u8 adr, u8 *data, int n)
 	int status;
 	u8 buf[256] = {1};
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
 	if (!status) {
 		ci->lastaddress = adr;
-		memcpy(buf+1, data, n);
-		status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+		memcpy(buf + 1, data, n);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
 	}
 	return status;
 }
@@ -249,12 +274,16 @@ static void cam_mode(struct cxd *ci, int mode)
 		write_regm(ci, 0x20, 0x80, 0x80);
 		break;
 	case 0x01:
+#ifdef BUFFER_MODE
+		if (!ci->en.read_data)
+			return;
 		printk(KERN_INFO "enable cam buffer mode\n");
 		/* write_reg(ci, 0x0d, 0x00); */
 		/* write_reg(ci, 0x0e, 0x01); */
 		write_regm(ci, 0x08, 0x40, 0x40);
 		/* read_reg(ci, 0x12, &dummy); */
 		write_regm(ci, 0x08, 0x80, 0x80);
+#endif
 		break;
 	default:
 		break;
@@ -264,8 +293,6 @@ static void cam_mode(struct cxd *ci, int mode)
 
 
 
-#define CHK_ERROR(s) if ((status = s)) break
-
 static int init(struct cxd *ci)
 {
 	int status;
@@ -273,63 +300,160 @@ static int init(struct cxd *ci)
 	mutex_lock(&ci->lock);
 	ci->mode = -1;
 	do {
-		CHK_ERROR(write_reg(ci, 0x00, 0x00));
-		CHK_ERROR(write_reg(ci, 0x01, 0x00));
-		CHK_ERROR(write_reg(ci, 0x02, 0x10));
-		CHK_ERROR(write_reg(ci, 0x03, 0x00));
-		CHK_ERROR(write_reg(ci, 0x05, 0xFF));
-		CHK_ERROR(write_reg(ci, 0x06, 0x1F));
-		CHK_ERROR(write_reg(ci, 0x07, 0x1F));
-		CHK_ERROR(write_reg(ci, 0x08, 0x28));
-		CHK_ERROR(write_reg(ci, 0x14, 0x20));
-
-		CHK_ERROR(write_reg(ci, 0x09, 0x4D)); /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
-		CHK_ERROR(write_reg(ci, 0x0A, 0xA7)); /* TOSTRT = 8, Mode B (gated clock), falling Edge, Serial, POL=HIGH, MSB */
-
-		/* Sync detector */
-		CHK_ERROR(write_reg(ci, 0x0B, 0x33));
-		CHK_ERROR(write_reg(ci, 0x0C, 0x33));
-
-		CHK_ERROR(write_regm(ci, 0x14, 0x00, 0x0F));
-		CHK_ERROR(write_reg(ci, 0x15, ci->clk_reg_b));
-		CHK_ERROR(write_regm(ci, 0x16, 0x00, 0x0F));
-		CHK_ERROR(write_reg(ci, 0x17, ci->clk_reg_f));
-
-		CHK_ERROR(write_reg(ci, 0x20, 0x28)); /* Integer Divider, Falling Edge, Internal Sync, */
-		CHK_ERROR(write_reg(ci, 0x21, 0x00)); /* MCLKI = TICLK/8 */
-		CHK_ERROR(write_reg(ci, 0x22, 0x07)); /* MCLKI = TICLK/8 */
-
-
-		CHK_ERROR(write_regm(ci, 0x20, 0x80, 0x80)); /* Reset CAM state machine */
-
-		CHK_ERROR(write_regm(ci, 0x03, 0x02, 02));  /* Enable IREQA Interrupt */
-		CHK_ERROR(write_reg(ci, 0x01, 0x04));  /* Enable CD Interrupt */
-		CHK_ERROR(write_reg(ci, 0x00, 0x31));  /* Enable TS1,Hot Swap,Slot A */
-		CHK_ERROR(write_regm(ci, 0x09, 0x08, 0x08));  /* Put TS in bypass */
+		status = write_reg(ci, 0x00, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x01, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x02, 0x10);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x03, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x05, 0xFF);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x06, 0x1F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x07, 0x1F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x08, 0x28);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x14, 0x20);
+		if (status < 0)
+			break;
+
+#if 0
+		status = write_reg(ci, 0x09, 0x4D); /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
+		if (status < 0)
+			break;
+#endif
+		status = write_reg(ci, 0x0A, 0xA7); /* TOSTRT = 8, Mode B (gated clock), falling Edge, Serial, POL=HIGH, MSB */
+		if (status < 0)
+			break;
+
+		status = write_reg(ci, 0x0B, 0x33);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x0C, 0x33);
+		if (status < 0)
+			break;
+
+		status = write_regm(ci, 0x14, 0x00, 0x0F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x15, ci->clk_reg_b);
+		if (status < 0)
+			break;
+		status = write_regm(ci, 0x16, 0x00, 0x0F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x17, ci->clk_reg_f);
+		if (status < 0)
+			break;
+
+		if (ci->cfg.clock_mode) {
+			if (ci->cfg.polarity) {
+				status = write_reg(ci, 0x09, 0x6f);
+				if (status < 0)
+					break;
+			} else {
+				status = write_reg(ci, 0x09, 0x6d);
+				if (status < 0)
+					break;
+			}
+			status = write_reg(ci, 0x20, 0x68);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x21, 0x00);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x22, 0x02);
+			if (status < 0)
+				break;
+		} else {
+			if (ci->cfg.polarity) {
+				status = write_reg(ci, 0x09, 0x4f);
+				if (status < 0)
+					break;
+			} else {
+				status = write_reg(ci, 0x09, 0x4d);
+				if (status < 0)
+					break;
+			}
+
+			status = write_reg(ci, 0x20, 0x28);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x21, 0x00);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x22, 0x07);
+			if (status < 0)
+				break;
+		}
+
+		status = write_regm(ci, 0x20, 0x80, 0x80);
+		if (status < 0)
+			break;
+		status = write_regm(ci, 0x03, 0x02, 0x02);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x01, 0x04);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x00, 0x31);
+		if (status < 0)
+			break;
+
+		/* Put TS in bypass */
+		status = write_regm(ci, 0x09, 0x08, 0x08);
+		if (status < 0)
+			break;
 		ci->cammode = -1;
-#ifdef BUFFER_MODE
 		cam_mode(ci, 0);
-#endif
 	} while (0);
 	mutex_unlock(&ci->lock);
 
 	return 0;
 }
 
-
 static int read_attribute_mem(struct dvb_ca_en50221 *ca,
 			      int slot, int address)
 {
 	struct cxd *ci = ca->data;
+#if 0
+	if (ci->amem_read) {
+		if (address <= 0 || address > 1024)
+			return -EIO;
+		return ci->amem[address];
+	}
+
+	mutex_lock(&ci->lock);
+	write_regm(ci, 0x06, 0x00, 0x05);
+	read_pccard(ci, 0, &ci->amem[0], 128);
+	read_pccard(ci, 128, &ci->amem[0], 128);
+	read_pccard(ci, 256, &ci->amem[0], 128);
+	read_pccard(ci, 384, &ci->amem[0], 128);
+	write_regm(ci, 0x06, 0x05, 0x05);
+	mutex_unlock(&ci->lock);
+	return ci->amem[address];
+#else
 	u8 val;
 	mutex_lock(&ci->lock);
 	set_mode(ci, 1);
 	read_pccard(ci, address, &val, 1);
 	mutex_unlock(&ci->lock);
+	/* printk(KERN_INFO "%02x:%02x\n", address,val); */
 	return val;
+#endif
 }
 
-
 static int write_attribute_mem(struct dvb_ca_en50221 *ca, int slot,
 			       int address, u8 value)
 {
@@ -372,6 +496,15 @@ static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	struct cxd *ci = ca->data;
 
 	mutex_lock(&ci->lock);
+#if 0
+	write_reg(ci, 0x00, 0x21);
+	write_reg(ci, 0x06, 0x1F);
+	write_reg(ci, 0x00, 0x31);
+#else
+#if 0
+	write_reg(ci, 0x06, 0x1F);
+	write_reg(ci, 0x06, 0x2F);
+#else
 	cam_mode(ci, 0);
 	write_reg(ci, 0x00, 0x21);
 	write_reg(ci, 0x06, 0x1F);
@@ -379,13 +512,25 @@ static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	write_regm(ci, 0x20, 0x80, 0x80);
 	write_reg(ci, 0x03, 0x02);
 	ci->ready = 0;
+#endif
+#endif
 	ci->mode = -1;
 	{
 		int i;
+#if 0
+		u8 val;
+#endif
 		for (i = 0; i < 100; i++) {
 			msleep(10);
+#if 0
+			read_reg(ci, 0x06, &val);
+			printk(KERN_INFO "%d:%02x\n", i, val);
+			if (!(val&0x10))
+				break;
+#else
 			if (ci->ready)
 				break;
+#endif
 		}
 	}
 	mutex_unlock(&ci->lock);
@@ -399,12 +544,12 @@ static int slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
 
 	printk(KERN_INFO "slot_shutdown\n");
 	mutex_lock(&ci->lock);
-	/* write_regm(ci, 0x09, 0x08, 0x08); */
-	write_regm(ci, 0x20, 0x80, 0x80);
-	write_regm(ci, 0x06, 0x07, 0x07);
+	write_regm(ci, 0x09, 0x08, 0x08);
+	write_regm(ci, 0x20, 0x80, 0x80); /* Reset CAM Mode */
+	write_regm(ci, 0x06, 0x07, 0x07); /* Clear IO Mode */
 	ci->mode = -1;
 	mutex_unlock(&ci->lock);
-	return 0; /* shutdown(ci); */
+	return 0;
 }
 
 static int slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
@@ -459,7 +604,6 @@ static int campoll(struct cxd *ci)
 		if (istat&8 && ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT) {
 			ci->ready = 1;
 			ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_READY;
-			printk(KERN_INFO "READY\n");
 		}
 	}
 	return 0;
@@ -510,7 +654,7 @@ static int write_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
 	struct cxd *ci = ca->data;
 
 	mutex_lock(&ci->lock);
-	printk(KERN_INFO "write_data %d\n", ecount);
+	printk(kern_INFO "write_data %d\n", ecount);
 	write_reg(ci, 0x0d, ecount>>8);
 	write_reg(ci, 0x0e, ecount&0xff);
 	write_block(ci, 0x11, ebuf, ecount);
@@ -535,15 +679,15 @@ static struct dvb_ca_en50221 en_templ = {
 
 };
 
-struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv,
+struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+				      void *priv,
 				      struct i2c_adapter *i2c)
 {
 	struct cxd *ci = 0;
-	u32 bitrate = 62000000;
 	u8 val;
 
-	if (i2c_read_reg(i2c, adr, 0, &val) < 0) {
-		printk(KERN_ERR "No CXD2099 detected at %02x\n", adr);
+	if (i2c_read_reg(i2c, cfg->adr, 0, &val) < 0) {
+		printk(KERN_INFO "No CXD2099 detected at %02x\n", cfg->adr);
 		return 0;
 	}
 
@@ -553,21 +697,20 @@ struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv,
 	memset(ci, 0, sizeof(*ci));
 
 	mutex_init(&ci->lock);
+	memcpy(&ci->cfg, cfg, sizeof(struct cxd2099_cfg));
 	ci->i2c = i2c;
-	ci->adr = adr;
 	ci->lastaddress = 0xff;
 	ci->clk_reg_b = 0x4a;
 	ci->clk_reg_f = 0x1b;
-	ci->bitrate = bitrate;
 
 	memcpy(&ci->en, &en_templ, sizeof(en_templ));
 	ci->en.data = ci;
 	init(ci);
-	printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->adr);
+	printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->cfg.adr);
 	return &ci->en;
 }
 EXPORT_SYMBOL(cxd2099_attach);
 
 MODULE_DESCRIPTION("cxd2099");
-MODULE_AUTHOR("Ralph Metzler <rjkm@metzlerbros.de>");
+MODULE_AUTHOR("Ralph Metzler");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/cxd2099/cxd2099.h b/drivers/staging/cxd2099/cxd2099.h
index bed54ff3e30b..19c588a59588 100644
--- a/drivers/staging/cxd2099/cxd2099.h
+++ b/drivers/staging/cxd2099/cxd2099.h
@@ -1,7 +1,7 @@
 /*
  * cxd2099.h: Driver for the CXD2099AR Common Interface Controller
  *
- * Copyright (C) 2010 DigitalDevices UG
+ * Copyright (C) 2010-2011 Digital Devices GmbH
  *
  *
  * This program is free software; you can redistribute it and/or
@@ -27,11 +27,21 @@
 
 #include <dvb_ca_en50221.h>
 
+struct cxd2099_cfg {
+	u32 bitrate;
+	u8  adr;
+	u8  polarity:1;
+	u8  clock_mode:1;
+};
+
 #if defined(CONFIG_DVB_CXD2099) || \
-        (defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
-struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c);
+	(defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
+struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+				      void *priv, struct i2c_adapter *i2c);
 #else
-static inline struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c)
+
+static inline struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+					void *priv, struct i2c_adapter *i2c)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 4996f760452f..5f25bbad36b6 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -88,68 +88,6 @@
 #include "et131x_adapter.h"
 #include "et131x.h"
 
-struct net_device_stats *et131x_stats(struct net_device *netdev);
-int et131x_open(struct net_device *netdev);
-int et131x_close(struct net_device *netdev);
-int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd);
-void et131x_multicast(struct net_device *netdev);
-int et131x_tx(struct sk_buff *skb, struct net_device *netdev);
-void et131x_tx_timeout(struct net_device *netdev);
-int et131x_change_mtu(struct net_device *netdev, int new_mtu);
-int et131x_set_mac_addr(struct net_device *netdev, void *new_mac);
-void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
-void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
-
-static const struct net_device_ops et131x_netdev_ops = {
-	.ndo_open		= et131x_open,
-	.ndo_stop		= et131x_close,
-	.ndo_start_xmit		= et131x_tx,
-	.ndo_set_multicast_list	= et131x_multicast,
-	.ndo_tx_timeout		= et131x_tx_timeout,
-	.ndo_change_mtu		= et131x_change_mtu,
-	.ndo_set_mac_address	= et131x_set_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_get_stats		= et131x_stats,
-	.ndo_do_ioctl		= et131x_ioctl,
-};
-
-/**
- * et131x_device_alloc
- *
- * Returns pointer to the allocated and initialized net_device struct for
- * this device.
- *
- * Create instances of net_device and wl_private for the new adapter and
- * register the device's entry points in the net_device structure.
- */
-struct net_device *et131x_device_alloc(void)
-{
-	struct net_device *netdev;
-
-	/* Alloc net_device and adapter structs */
-	netdev = alloc_etherdev(sizeof(struct et131x_adapter));
-
-	if (netdev == NULL) {
-		printk(KERN_ERR "et131x: Alloc of net_device struct failed\n");
-		return NULL;
-	}
-
-	/* Setup the function registration table (and other data) for a
-	 * net_device
-	 */
-	/* netdev->init               = &et131x_init; */
-	/* netdev->set_config = &et131x_config; */
-	netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
-	netdev->netdev_ops = &et131x_netdev_ops;
-
-	/* netdev->ethtool_ops        = &et131x_ethtool_ops; */
-
-	/* Poll? */
-	/* netdev->poll               = &et131x_poll; */
-	/* netdev->poll_controller    = &et131x_poll_controller; */
-	return netdev;
-}
-
 /**
  * et131x_stats - Return the current device statistics.
  * @netdev: device whose stats are being queried
diff --git a/drivers/staging/gma500/mrst_hdmi.c b/drivers/staging/gma500/mrst_hdmi.c
index d6a517971ba8..e66607eb3d3e 100644
--- a/drivers/staging/gma500/mrst_hdmi.c
+++ b/drivers/staging/gma500/mrst_hdmi.c
@@ -129,7 +129,7 @@ static void wait_for_vblank(struct drm_device *dev)
 {
 	/* FIXME: Can we do this as a sleep ? */
 	/* Wait for 20ms, i.e. one cycle at 50hz. */
-	udelay(20000);
+	mdelay(20);
 }
 
 static void scu_busy_loop(void *scu_base)
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index 0f22f0f47446..1a7c19ae766f 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -42,7 +42,7 @@
 #include <net/xfrm.h>
 #endif /* CONFIG_XFRM */
 
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 
 #include <asm/octeon/octeon.h>
 
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 6227571149f5..b445cd63f901 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -38,7 +38,7 @@
 #include <net/xfrm.h>
 #endif /* CONFIG_XFRM */
 
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 
 #include <asm/octeon/octeon.h>
 
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index 49d15c204ebf..38e67f0bf624 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -19,7 +19,6 @@
 #include <linux/random.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <linux/interrupt.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/staging/rtl8192e/r8192E.h b/drivers/staging/rtl8192e/r8192E.h
index 89fe8fc3d6c2..137f66b034bb 100644
--- a/drivers/staging/rtl8192e/r8192E.h
+++ b/drivers/staging/rtl8192e/r8192E.h
@@ -35,7 +35,6 @@
 #include <linux/proc_fs.h>	// Necessary because we use the proc fs
 #include <linux/if_arp.h>
 #include <linux/random.h>
-#include <linux/version.h>
 #include <linux/interrupt.h>
 #include <asm/io.h>
 #include "ieee80211/rtl819x_HT.h"
diff --git a/drivers/staging/solo6x10/solo6x10.h b/drivers/staging/solo6x10/solo6x10.h
index fd59b093dd4d..17c06bd6cc91 100644
--- a/drivers/staging/solo6x10/solo6x10.h
+++ b/drivers/staging/solo6x10/solo6x10.h
@@ -29,7 +29,7 @@
 #include <linux/wait.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-dev.h>
 #include <media/videobuf-core.h>
diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
index 1a38896f4331..a2f31c69d12e 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -18,7 +18,7 @@
 #define _HOST_OS_H_
 
 #include <asm/system.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 #include <linux/semaphore.h>
 #include <linux/uaccess.h>
 #include <linux/irq.h>
diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
index ddfd7c33361b..bd5fa89af07c 100644
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ b/drivers/staging/tm6000/tm6000-alsa.c
@@ -84,7 +84,6 @@ static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
 
 	tm6000_set_audio_bitrate(core, 48000);
 
-
 	return 0;
 }
 
@@ -123,6 +122,7 @@ static int dsp_buffer_alloc(struct snd_pcm_substream *substream, int size)
 	if (substream->runtime->dma_area) {
 		if (substream->runtime->dma_bytes > size)
 			return 0;
+
 		dsp_buffer_free(substream);
 	}
 
@@ -152,9 +152,9 @@ static struct snd_pcm_hardware snd_tm6000_digital_hw = {
 		SNDRV_PCM_INFO_MMAP_VALID,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 
-	.rates =		SNDRV_PCM_RATE_CONTINUOUS,
-	.rate_min =		48000,
-	.rate_max =		48000,
+	.rates = SNDRV_PCM_RATE_CONTINUOUS,
+	.rate_min = 48000,
+	.rate_max = 48000,
 	.channels_min = 2,
 	.channels_max = 2,
 	.period_bytes_min = 64,
@@ -254,9 +254,7 @@ static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
 		memcpy(runtime->dma_area + buf_pos * stride, buf,
 			length * stride);
 
-#ifndef NO_PCM_LOCK
 	snd_pcm_stream_lock(substream);
-#endif
 
 	chip->buf_pos += length;
 	if (chip->buf_pos >= runtime->buffer_size)
@@ -268,9 +266,7 @@ static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
 		period_elapsed = 1;
 	}
 
-#ifndef NO_PCM_LOCK
 	snd_pcm_stream_unlock(substream);
-#endif
 
 	if (period_elapsed)
 		snd_pcm_period_elapsed(substream);
diff --git a/drivers/staging/usbip/userspace/src/utils.h b/drivers/staging/usbip/userspace/src/utils.h
index c36aa271118e..5916fd3e02a6 100644
--- a/drivers/staging/usbip/userspace/src/utils.h
+++ b/drivers/staging/usbip/userspace/src/utils.h
@@ -22,29 +22,4 @@
 int modify_match_busid(char *busid, int add);
 
 #endif /* __UTILS_H */
-#include <sysfs/libsysfs.h>
-#include <glib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <time.h>
-#include <errno.h>
 
-
-
-/* Be sync to kernel header */
-#define BUS_ID_SIZE 20
-
-int read_string(char *path, char *, size_t len);
-int read_integer(char *path);
-int getdevicename(char *busid, char *name, size_t len);
-int getdriver(char *busid, int conf, int infnum, char *driver, size_t len);
-int read_bNumInterfaces(char *busid);
-int read_bConfigurationValue(char *busid);
-int write_integer(char *path, int value);
-int write_bConfigurationValue(char *busid, int config);
-int read_bDeviceClass(char *busid);
-int readline(int sockfd, char *str, int strlen);
-int writeline(int sockfd, char *buff, int bufflen);
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h
index eeedf0186365..07d835b3b706 100644
--- a/drivers/staging/winbond/mds_s.h
+++ b/drivers/staging/winbond/mds_s.h
@@ -3,7 +3,7 @@
 
 #include <linux/timer.h>
 #include <linux/types.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 
 #include "localpara.h"
 #include "mac_structures.h"
diff --git a/drivers/staging/winbond/wb35reg_s.h b/drivers/staging/winbond/wb35reg_s.h
index eb274ffdd1ba..dc79faa4029f 100644
--- a/drivers/staging/winbond/wb35reg_s.h
+++ b/drivers/staging/winbond/wb35reg_s.h
@@ -3,7 +3,7 @@
 
 #include <linux/spinlock.h>
 #include <linux/types.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 
 struct hw_data;