Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
  staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
  staging:iio:kfifo_buf fix double initialization of the ring device structure.
  staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
  staging:iio:imu fix missing register table index for some channels
  spectra: enable device before poking it
  staging: rts_pstor: Fix a miswriting
  staging/lirc_bt829: Return -ENODEV when no hardware is found.
  staging/lirc_parallel: remove pointless prototypes.
  staging/lirc_parallel: fix panic on rmmod
  staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
  Staging: zram: Fix kunmapping order
  Revert "gma500: Fix dependencies"
  gma500: Add medfield header
  gma500: wire up the mrst i2c bus from chip_info
  gma500: Fix DPU build
  gma500: Clean up the DPU config and make it runtime
  gma500: resync with Medfield progress
  gma500: Use the mrst helpers and power control for mode commit
  gma500@ Fix backlight range error
  gma500: More Moorestown muddle meddling means MM maybe might modeset
  ...

Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
 - Documentation/feature-removal-schedule.txt
 - drivers/staging/bcm/headers.h
 - drivers/staging/brcm80211/brcmfmac/dhd_linux.c
 - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
 - drivers/staging/brcm80211/brcmfmac/wl_iw.c
 - drivers/staging/et131x/et131x_netdev.c
 - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
 - drivers/staging/rtl8192e/r8192E.h
 - drivers/staging/usbip/userspace/src/utils.h

7 files changed, 70 insertions, 65 deletions

diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 8a11ffcd7de8..f18e3e140413 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>
+#include <linux/ratelimit.h>
 
 #include <net/dst.h>
 
@@ -129,22 +130,22 @@ static void cvm_oct_adjust_link(struct net_device *dev)
 		if (priv->last_link) {
 			netif_carrier_on(dev);
 			if (priv->queue != -1)
-				DEBUGPRINT("%s: %u Mbps %s duplex, "
-					   "port %2d, queue %2d\n",
-					   dev->name, priv->phydev->speed,
-					   priv->phydev->duplex ?
-						"Full" : "Half",
-					   priv->port, priv->queue);
+				printk_ratelimited("%s: %u Mbps %s duplex, "
+						   "port %2d, queue %2d\n",
+						   dev->name, priv->phydev->speed,
+						   priv->phydev->duplex ?
+						   "Full" : "Half",
+						   priv->port, priv->queue);
 			else
-				DEBUGPRINT("%s: %u Mbps %s duplex, "
-					   "port %2d, POW\n",
-					   dev->name, priv->phydev->speed,
-					   priv->phydev->duplex ?
-						"Full" : "Half",
-					   priv->port);
+				printk_ratelimited("%s: %u Mbps %s duplex, "
+						   "port %2d, POW\n",
+						   dev->name, priv->phydev->speed,
+						   priv->phydev->duplex ?
+						   "Full" : "Half",
+						   priv->port);
 		} else {
 			netif_carrier_off(dev);
-			DEBUGPRINT("%s: Link down\n", dev->name);
+			printk_ratelimited("%s: Link down\n", dev->name);
 		}
 	}
 }
diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c
index a0d4d4b98bdc..9c0d2936e486 100644
--- a/drivers/staging/octeon/ethernet-rgmii.c
+++ b/drivers/staging/octeon/ethernet-rgmii.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
+#include <linux/ratelimit.h>
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
@@ -116,9 +117,9 @@ static void cvm_oct_rgmii_poll(struct net_device *dev)
 				cvmx_write_csr(CVMX_GMXX_RXX_INT_REG
 					       (index, interface),
 					       gmxx_rxx_int_reg.u64);
-				DEBUGPRINT("%s: Using 10Mbps with software "
-					   "preamble removal\n",
-				     dev->name);
+				printk_ratelimited("%s: Using 10Mbps with software "
+						   "preamble removal\n",
+						   dev->name);
 			}
 		}
 
@@ -174,23 +175,23 @@ static void cvm_oct_rgmii_poll(struct net_device *dev)
 			if (!netif_carrier_ok(dev))
 				netif_carrier_on(dev);
 			if (priv->queue != -1)
-				DEBUGPRINT("%s: %u Mbps %s duplex, "
-					   "port %2d, queue %2d\n",
-					   dev->name, link_info.s.speed,
-					   (link_info.s.full_duplex) ?
-						"Full" : "Half",
-					   priv->port, priv->queue);
+				printk_ratelimited("%s: %u Mbps %s duplex, "
+						   "port %2d, queue %2d\n",
+						   dev->name, link_info.s.speed,
+						   (link_info.s.full_duplex) ?
+						   "Full" : "Half",
+						   priv->port, priv->queue);
 			else
-				DEBUGPRINT("%s: %u Mbps %s duplex, "
-					   "port %2d, POW\n",
-					   dev->name, link_info.s.speed,
-					   (link_info.s.full_duplex) ?
-						"Full" : "Half",
-					   priv->port);
+				printk_ratelimited("%s: %u Mbps %s duplex, "
+						   "port %2d, POW\n",
+						   dev->name, link_info.s.speed,
+						   (link_info.s.full_duplex) ?
+						   "Full" : "Half",
+						   priv->port);
 		} else {
 			if (netif_carrier_ok(dev))
 				netif_carrier_off(dev);
-			DEBUGPRINT("%s: Link down\n", dev->name);
+			printk_ratelimited("%s: Link down\n", dev->name);
 		}
 	}
 }
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index cb38f9eb2cc0..0f22f0f47446 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -34,6 +34,7 @@
 #include <linux/ip.h>
 #include <linux/string.h>
 #include <linux/prefetch.h>
+#include <linux/ratelimit.h>
 #include <linux/smp.h>
 #include <net/dst.h>
 #ifdef CONFIG_XFRM
@@ -186,13 +187,13 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 
 			if (*ptr == 0xd5) {
 				/*
-				   DEBUGPRINT("Port %d received 0xd5 preamble\n", work->ipprt);
+				  printk_ratelimited("Port %d received 0xd5 preamble\n", work->ipprt);
 				 */
 				work->packet_ptr.s.addr += i + 1;
 				work->len -= i + 5;
 			} else if ((*ptr & 0xf) == 0xd) {
 				/*
-				   DEBUGPRINT("Port %d received 0x?d preamble\n", work->ipprt);
+				  printk_ratelimited("Port %d received 0x?d preamble\n", work->ipprt);
 				 */
 				work->packet_ptr.s.addr += i;
 				work->len -= i + 4;
@@ -203,9 +204,9 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 					ptr++;
 				}
 			} else {
-				DEBUGPRINT("Port %d unknown preamble, packet "
-					   "dropped\n",
-				     work->ipprt);
+				printk_ratelimited("Port %d unknown preamble, packet "
+						   "dropped\n",
+						   work->ipprt);
 				/*
 				   cvmx_helper_dump_packet(work);
 				 */
@@ -214,8 +215,8 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 			}
 		}
 	} else {
-		DEBUGPRINT("Port %d receive error code %d, packet dropped\n",
-			   work->ipprt, work->word2.snoip.err_code);
+		printk_ratelimited("Port %d receive error code %d, packet dropped\n",
+				   work->ipprt, work->word2.snoip.err_code);
 		cvm_oct_free_work(work);
 		return 1;
 	}
@@ -334,8 +335,9 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 			 */
 			skb = dev_alloc_skb(work->len);
 			if (!skb) {
-				DEBUGPRINT("Port %d failed to allocate skbuff, packet dropped\n",
-					   work->ipprt);
+				printk_ratelimited("Port %d failed to allocate "
+						   "skbuff, packet dropped\n",
+						   work->ipprt);
 				cvm_oct_free_work(work);
 				continue;
 			}
@@ -429,7 +431,7 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 			} else {
 				/* Drop any packet received for a device that isn't up */
 				/*
-				DEBUGPRINT("%s: Device not up, packet dropped\n",
+				  printk_ratelimited("%s: Device not up, packet dropped\n",
 					   dev->name);
 				*/
 #ifdef CONFIG_64BIT
@@ -444,7 +446,7 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 			 * Drop any packet received for a device that
 			 * doesn't exist.
 			 */
-			DEBUGPRINT("Port %d not controlled by Linux, packet dropped\n",
+			printk_ratelimited("Port %d not controlled by Linux, packet dropped\n",
 				   work->ipprt);
 			dev_kfree_skb_irq(skb);
 		}
diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c
index 2d8589eb461e..5e148b512c97 100644
--- a/drivers/staging/octeon/ethernet-sgmii.c
+++ b/drivers/staging/octeon/ethernet-sgmii.c
@@ -26,6 +26,7 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/ratelimit.h>
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
@@ -90,20 +91,21 @@ static void cvm_oct_sgmii_poll(struct net_device *dev)
 		if (!netif_carrier_ok(dev))
 			netif_carrier_on(dev);
 		if (priv->queue != -1)
-			DEBUGPRINT
+			printk_ratelimited
 			    ("%s: %u Mbps %s duplex, port %2d, queue %2d\n",
 			     dev->name, link_info.s.speed,
 			     (link_info.s.full_duplex) ? "Full" : "Half",
 			     priv->port, priv->queue);
 		else
-			DEBUGPRINT("%s: %u Mbps %s duplex, port %2d, POW\n",
-				   dev->name, link_info.s.speed,
-				   (link_info.s.full_duplex) ? "Full" : "Half",
-				   priv->port);
+			printk_ratelimited
+				("%s: %u Mbps %s duplex, port %2d, POW\n",
+				 dev->name, link_info.s.speed,
+				 (link_info.s.full_duplex) ? "Full" : "Half",
+				 priv->port);
 	} else {
 		if (netif_carrier_ok(dev))
 			netif_carrier_off(dev);
-		DEBUGPRINT("%s: Link down\n", dev->name);
+		printk_ratelimited("%s: Link down\n", dev->name);
 	}
 }
 
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index afc2b734d554..6227571149f5 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/etherdevice.h>
 #include <linux/ip.h>
+#include <linux/ratelimit.h>
 #include <linux/string.h>
 #include <net/dst.h>
 #ifdef CONFIG_XFRM
@@ -446,7 +447,7 @@ dont_put_skbuff_in_hw:
 						 priv->queue + qos,
 						 pko_command, hw_buffer,
 						 CVMX_PKO_LOCK_NONE))) {
-		DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
+		printk_ratelimited("%s: Failed to send the packet\n", dev->name);
 		queue_type = QUEUE_DROP;
 	}
 skip_xmit:
@@ -525,8 +526,8 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
 	/* Get a work queue entry */
 	cvmx_wqe_t *work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL);
 	if (unlikely(work == NULL)) {
-		DEBUGPRINT("%s: Failed to allocate a work queue entry\n",
-			   dev->name);
+		printk_ratelimited("%s: Failed to allocate a work "
+				   "queue entry\n", dev->name);
 		priv->stats.tx_dropped++;
 		dev_kfree_skb(skb);
 		return 0;
@@ -535,8 +536,8 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
 	/* Get a packet buffer */
 	packet_buffer = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL);
 	if (unlikely(packet_buffer == NULL)) {
-		DEBUGPRINT("%s: Failed to allocate a packet buffer\n",
-			   dev->name);
+		printk_ratelimited("%s: Failed to allocate a packet buffer\n",
+				   dev->name);
 		cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1));
 		priv->stats.tx_dropped++;
 		dev_kfree_skb(skb);
diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h
index c745a72a0594..144fb99bf50c 100644
--- a/drivers/staging/octeon/ethernet-util.h
+++ b/drivers/staging/octeon/ethernet-util.h
@@ -25,10 +25,6 @@
  * Contact Cavium Networks for more information
 *********************************************************************/
 
-#define DEBUGPRINT(format, ...) do { if (printk_ratelimit()) 		\
-					printk(format, ##__VA_ARGS__);	\
-				} while (0)
-
 /**
  * cvm_oct_get_buffer_ptr - convert packet data address to pointer
  * @packet_ptr: Packet data hardware address
diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c
index 3fca1cc31ed8..861a4b3fe857 100644
--- a/drivers/staging/octeon/ethernet-xaui.c
+++ b/drivers/staging/octeon/ethernet-xaui.c
@@ -26,6 +26,7 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/ratelimit.h>
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
@@ -89,20 +90,21 @@ static void cvm_oct_xaui_poll(struct net_device *dev)
 		if (!netif_carrier_ok(dev))
 			netif_carrier_on(dev);
 		if (priv->queue != -1)
-			DEBUGPRINT
-			    ("%s: %u Mbps %s duplex, port %2d, queue %2d\n",
-			     dev->name, link_info.s.speed,
-			     (link_info.s.full_duplex) ? "Full" : "Half",
-			     priv->port, priv->queue);
+			printk_ratelimited
+				("%s: %u Mbps %s duplex, port %2d, queue %2d\n",
+				 dev->name, link_info.s.speed,
+				 (link_info.s.full_duplex) ? "Full" : "Half",
+				 priv->port, priv->queue);
 		else
-			DEBUGPRINT("%s: %u Mbps %s duplex, port %2d, POW\n",
-				   dev->name, link_info.s.speed,
-				   (link_info.s.full_duplex) ? "Full" : "Half",
-				   priv->port);
+			printk_ratelimited
+				("%s: %u Mbps %s duplex, port %2d, POW\n",
+				 dev->name, link_info.s.speed,
+				 (link_info.s.full_duplex) ? "Full" : "Half",
+				 priv->port);
 	} else {
 		if (netif_carrier_ok(dev))
 			netif_carrier_off(dev);
-		DEBUGPRINT("%s: Link down\n", dev->name);
+		printk_ratelimited("%s: Link down\n", dev->name);
 	}
 }