staging: et131x: move et1310_phy.h contents into et131x.h

Move et1310_phy.h register defines into et131x.h and delete
et1310_phy.h

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 227 insertions, 291 deletions

diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h
deleted file mode 100644
index feb5761f1ec3..000000000000
--- a/drivers/staging/et131x/et1310_phy.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Agere Systems Inc.
- * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
- *
- * Copyright © 2005 Agere Systems Inc.
- * All rights reserved.
- *   http://www.agere.com
- *
- * Copyright (c) 2011 Mark Einon <mark.einon@gmail.com>
- *
- *------------------------------------------------------------------------------
- *
- * et1310_phy.h - Defines, structs, enums, prototypes, etc. pertaining to the
- *                PHY.
- *
- *------------------------------------------------------------------------------
- *
- * SOFTWARE LICENSE
- *
- * This software is provided subject to the following terms and conditions,
- * which you should read carefully before using the software.  Using this
- * software indicates your acceptance of these terms and conditions.  If you do
- * not agree with these terms and conditions, do not use the software.
- *
- * Copyright © 2005 Agere Systems Inc.
- * All rights reserved.
- *
- * Redistribution and use in source or binary forms, with or without
- * modifications, are permitted provided that the following conditions are met:
- *
- * . Redistributions of source code must retain the above copyright notice, this
- *    list of conditions and the following Disclaimer as comments in the code as
- *    well as in the documentation and/or other materials provided with the
- *    distribution.
- *
- * . Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following Disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- *
- * . Neither the name of Agere Systems Inc. nor the names of the contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * Disclaimer
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
- * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
- * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- *
- */
-
-#ifndef _ET1310_PHY_H_
-#define _ET1310_PHY_H_
-
-/*
- * Defines for generic MII registers 0x00 -> 0x0F can be found in
- * include/linux/mii.h
- */
-
-/* some defines for modem registers that seem to be 'reserved' */
-#define PHY_INDEX_REG              0x10
-#define PHY_DATA_REG               0x11
-#define PHY_MPHY_CONTROL_REG       0x12
-
-/* defines for specified registers */
-#define PHY_LOOPBACK_CONTROL       0x13	/* TRU_VMI_LOOPBACK_CONTROL_1_REG 19 */
-					/* TRU_VMI_LOOPBACK_CONTROL_2_REG 20 */
-#define PHY_REGISTER_MGMT_CONTROL  0x15	/* TRU_VMI_MI_SEQ_CONTROL_REG     21 */
-#define PHY_CONFIG                 0x16	/* TRU_VMI_CONFIGURATION_REG      22 */
-#define PHY_PHY_CONTROL            0x17	/* TRU_VMI_PHY_CONTROL_REG        23 */
-#define PHY_INTERRUPT_MASK         0x18	/* TRU_VMI_INTERRUPT_MASK_REG     24 */
-#define PHY_INTERRUPT_STATUS       0x19	/* TRU_VMI_INTERRUPT_STATUS_REG   25 */
-#define PHY_PHY_STATUS             0x1A	/* TRU_VMI_PHY_STATUS_REG         26 */
-#define PHY_LED_1                  0x1B	/* TRU_VMI_LED_CONTROL_1_REG      27 */
-#define PHY_LED_2                  0x1C	/* TRU_VMI_LED_CONTROL_2_REG      28 */
-					/* TRU_VMI_LINK_CONTROL_REG       29 */
-					/* TRU_VMI_TIMING_CONTROL_REG        */
-
-/* MI Register 10: Gigabit basic mode status reg(Reg 0x0A) */
-#define ET_1000BT_MSTR_SLV 0x4000
-
-/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */
-
-/* MI Register 19: Loopback Control Reg(0x13)
- *	15:	mii_en
- *	14:	pcs_en
- *	13:	pmd_en
- *	12:	all_digital_en
- *	11:	replica_en
- *	10:	line_driver_en
- *	9-0:	reserved
- */
-
-/* MI Register 20: Reserved Reg(0x14) */
-
-/* MI Register 21: Management Interface Control Reg(0x15)
- *	15-11:	reserved
- *	10-4:	mi_error_count
- *	3:	reserved
- *	2:	ignore_10g_fr
- *	1:	reserved
- *	0:	preamble_supress_en
- */
-
-/* MI Register 22: PHY Configuration Reg(0x16)
- *	15:	crs_tx_en
- *	14:	reserved
- *	13-12:	tx_fifo_depth
- *	11-10:	speed_downshift
- *	9:	pbi_detect
- *	8:	tbi_rate
- *	7:	alternate_np
- *	6:	group_mdio_en
- *	5:	tx_clock_en
- *	4:	sys_clock_en
- *	3:	reserved
- *	2-0:	mac_if_mode
- */
-
-#define ET_PHY_CONFIG_TX_FIFO_DEPTH	0x3000
-
-#define ET_PHY_CONFIG_FIFO_DEPTH_8	0x0000
-#define ET_PHY_CONFIG_FIFO_DEPTH_16	0x1000
-#define ET_PHY_CONFIG_FIFO_DEPTH_32	0x2000
-#define ET_PHY_CONFIG_FIFO_DEPTH_64	0x3000
-
-/* MI Register 23: PHY CONTROL Reg(0x17)
- *	15:	reserved
- *	14:	tdr_en
- *	13:	reserved
- *	12-11:	downshift_attempts
- *	10-6:	reserved
- *	5:	jabber_10baseT
- *	4:	sqe_10baseT
- *	3:	tp_loopback_10baseT
- *	2:	preamble_gen_en
- *	1:	reserved
- *	0:	force_int
- */
-
-/* MI Register 24: Interrupt Mask Reg(0x18)
- *	15-10:	reserved
- *	9:	mdio_sync_lost
- *	8:	autoneg_status
- *	7:	hi_bit_err
- *	6:	np_rx
- *	5:	err_counter_full
- *	4:	fifo_over_underflow
- *	3:	rx_status
- *	2:	link_status
- *	1:	automatic_speed
- *	0:	int_en
- */
-
-#define ET_PHY_INT_MASK_AUTONEGSTAT	0x0100
-#define ET_PHY_INT_MASK_LINKSTAT	0x0004
-#define ET_PHY_INT_MASK_ENABLE		0x0001
-
-/* MI Register 25: Interrupt Status Reg(0x19)
- *	15-10:	reserved
- *	9:	mdio_sync_lost
- *	8:	autoneg_status
- *	7:	hi_bit_err
- *	6:	np_rx
- *	5:	err_counter_full
- *	4:	fifo_over_underflow
- *	3:	rx_status
- *	2:	link_status
- *	1:	automatic_speed
- *	0:	int_en
- */
-
-/* MI Register 26: PHY Status Reg(0x1A)
- *	15:	reserved
- *	14-13:	autoneg_fault
- *	12:	autoneg_status
- *	11:	mdi_x_status
- *	10:	polarity_status
- *	9-8:	speed_status
- *	7:	duplex_status
- *	6:	link_status
- *	5:	tx_status
- *	4:	rx_status
- *	3:	collision_status
- *	2:	autoneg_en
- *	1:	pause_en
- *	0:	asymmetric_dir
- */
-#define ET_PHY_AUTONEG_STATUS	0x1000
-#define ET_PHY_POLARITY_STATUS	0x0400
-#define ET_PHY_SPEED_STATUS	0x0300
-#define ET_PHY_DUPLEX_STATUS	0x0080
-#define ET_PHY_LSTATUS		0x0040
-#define ET_PHY_AUTONEG_ENABLE	0x0020
-
-/* MI Register 27: LED Control Reg 1(0x1B)
- *	15-14:	reserved
- *	13-12:	led_dup_indicate
- *	11-10:	led_10baseT
- *	9-8:	led_collision
- *	7-4:	reserved
- *	3-2:	pulse_dur
- *	1:	pulse_stretch1
- *	0:	pulse_stretch0
- */
-
-/* MI Register 28: LED Control Reg 2(0x1C)
- *	15-12:	led_link
- *	11-8:	led_tx_rx
- *	7-4:	led_100BaseTX
- *	3-0:	led_1000BaseT
- */
-#define ET_LED2_LED_LINK	0xF000
-#define ET_LED2_LED_TXRX	0x0F00
-#define ET_LED2_LED_100TX	0x00F0
-#define ET_LED2_LED_1000T	0x000F
-
-/* defines for LED control reg 2 values */
-#define LED_VAL_1000BT			0x0
-#define LED_VAL_100BTX			0x1
-#define LED_VAL_10BT			0x2
-#define LED_VAL_1000BT_100BTX		0x3 /* 1000BT on, 100BTX blink */
-#define LED_VAL_LINKON			0x4
-#define LED_VAL_TX			0x5
-#define LED_VAL_RX			0x6
-#define LED_VAL_TXRX			0x7 /* TX or RX */
-#define LED_VAL_DUPLEXFULL		0x8
-#define LED_VAL_COLLISION		0x9
-#define LED_VAL_LINKON_ACTIVE		0xA /* Link on, activity blink */
-#define LED_VAL_LINKON_RECV		0xB /* Link on, receive blink */
-#define LED_VAL_DUPLEXFULL_COLLISION	0xC /* Duplex on, collision blink */
-#define LED_VAL_BLINK			0xD
-#define LED_VAL_ON			0xE
-#define LED_VAL_OFF			0xF
-
-#define LED_LINK_SHIFT			12
-#define LED_TXRX_SHIFT			8
-#define LED_100TX_SHIFT			4
-
-/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */
-
-/* Defines for PHY access routines */
-
-/* Define bit operation flags */
-#define TRUEPHY_BIT_CLEAR               0
-#define TRUEPHY_BIT_SET                 1
-#define TRUEPHY_BIT_READ                2
-
-/* Define read/write operation flags */
-#ifndef TRUEPHY_READ
-#define TRUEPHY_READ                    0
-#define TRUEPHY_WRITE                   1
-#define TRUEPHY_MASK                    2
-#endif
-
-/* Define master/slave configuration values */
-#define TRUEPHY_CFG_SLAVE               0
-#define TRUEPHY_CFG_MASTER              1
-
-/* Define MDI/MDI-X settings */
-#define TRUEPHY_MDI                     0
-#define TRUEPHY_MDIX                    1
-#define TRUEPHY_AUTO_MDI_MDIX           2
-
-/* Define 10Base-T link polarities */
-#define TRUEPHY_POLARITY_NORMAL         0
-#define TRUEPHY_POLARITY_INVERTED       1
-
-/* Define auto-negotiation results */
-#define TRUEPHY_ANEG_NOT_COMPLETE       0
-#define TRUEPHY_ANEG_COMPLETE           1
-#define TRUEPHY_ANEG_DISABLED           2
-
-/* Define duplex advertisement flags */
-#define TRUEPHY_ADV_DUPLEX_NONE         0x00
-#define TRUEPHY_ADV_DUPLEX_FULL         0x01
-#define TRUEPHY_ADV_DUPLEX_HALF         0x02
-#define TRUEPHY_ADV_DUPLEX_BOTH     \
-	(TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF)
-
-#endif /* _ET1310_PHY_H_ */
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 60ff3bca3589..271ae31b77fb 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -83,7 +83,6 @@
 #include <linux/random.h>
 #include <linux/phy.h>
 
-#include "et1310_phy.h"
 #include "et131x_adapter.h"
 #include "et1310_tx.h"
 #include "et1310_rx.h"
diff --git a/drivers/staging/et131x/et131x.h b/drivers/staging/et131x/et131x.h
index 8f61a7225c20..84b274d90ce2 100644
--- a/drivers/staging/et131x/et131x.h
+++ b/drivers/staging/et131x/et131x.h
@@ -1447,3 +1447,230 @@ struct address_map {
 	u8 unused_exp_rom[4096];	/* MGS-size TBD */
 	u8 unused__[524288];	/* unused section of address map */
 };
+
+/*
+ * Defines for generic MII registers 0x00 -> 0x0F can be found in
+ * include/linux/mii.h
+ */
+
+/* some defines for modem registers that seem to be 'reserved' */
+#define PHY_INDEX_REG              0x10
+#define PHY_DATA_REG               0x11
+#define PHY_MPHY_CONTROL_REG       0x12
+
+/* defines for specified registers */
+#define PHY_LOOPBACK_CONTROL       0x13	/* TRU_VMI_LOOPBACK_CONTROL_1_REG 19 */
+					/* TRU_VMI_LOOPBACK_CONTROL_2_REG 20 */
+#define PHY_REGISTER_MGMT_CONTROL  0x15	/* TRU_VMI_MI_SEQ_CONTROL_REG     21 */
+#define PHY_CONFIG                 0x16	/* TRU_VMI_CONFIGURATION_REG      22 */
+#define PHY_PHY_CONTROL            0x17	/* TRU_VMI_PHY_CONTROL_REG        23 */
+#define PHY_INTERRUPT_MASK         0x18	/* TRU_VMI_INTERRUPT_MASK_REG     24 */
+#define PHY_INTERRUPT_STATUS       0x19	/* TRU_VMI_INTERRUPT_STATUS_REG   25 */
+#define PHY_PHY_STATUS             0x1A	/* TRU_VMI_PHY_STATUS_REG         26 */
+#define PHY_LED_1                  0x1B	/* TRU_VMI_LED_CONTROL_1_REG      27 */
+#define PHY_LED_2                  0x1C	/* TRU_VMI_LED_CONTROL_2_REG      28 */
+					/* TRU_VMI_LINK_CONTROL_REG       29 */
+					/* TRU_VMI_TIMING_CONTROL_REG        */
+
+/* MI Register 10: Gigabit basic mode status reg(Reg 0x0A) */
+#define ET_1000BT_MSTR_SLV 0x4000
+
+/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */
+
+/* MI Register 19: Loopback Control Reg(0x13)
+ *	15:	mii_en
+ *	14:	pcs_en
+ *	13:	pmd_en
+ *	12:	all_digital_en
+ *	11:	replica_en
+ *	10:	line_driver_en
+ *	9-0:	reserved
+ */
+
+/* MI Register 20: Reserved Reg(0x14) */
+
+/* MI Register 21: Management Interface Control Reg(0x15)
+ *	15-11:	reserved
+ *	10-4:	mi_error_count
+ *	3:	reserved
+ *	2:	ignore_10g_fr
+ *	1:	reserved
+ *	0:	preamble_supress_en
+ */
+
+/* MI Register 22: PHY Configuration Reg(0x16)
+ *	15:	crs_tx_en
+ *	14:	reserved
+ *	13-12:	tx_fifo_depth
+ *	11-10:	speed_downshift
+ *	9:	pbi_detect
+ *	8:	tbi_rate
+ *	7:	alternate_np
+ *	6:	group_mdio_en
+ *	5:	tx_clock_en
+ *	4:	sys_clock_en
+ *	3:	reserved
+ *	2-0:	mac_if_mode
+ */
+
+#define ET_PHY_CONFIG_TX_FIFO_DEPTH	0x3000
+
+#define ET_PHY_CONFIG_FIFO_DEPTH_8	0x0000
+#define ET_PHY_CONFIG_FIFO_DEPTH_16	0x1000
+#define ET_PHY_CONFIG_FIFO_DEPTH_32	0x2000
+#define ET_PHY_CONFIG_FIFO_DEPTH_64	0x3000
+
+/* MI Register 23: PHY CONTROL Reg(0x17)
+ *	15:	reserved
+ *	14:	tdr_en
+ *	13:	reserved
+ *	12-11:	downshift_attempts
+ *	10-6:	reserved
+ *	5:	jabber_10baseT
+ *	4:	sqe_10baseT
+ *	3:	tp_loopback_10baseT
+ *	2:	preamble_gen_en
+ *	1:	reserved
+ *	0:	force_int
+ */
+
+/* MI Register 24: Interrupt Mask Reg(0x18)
+ *	15-10:	reserved
+ *	9:	mdio_sync_lost
+ *	8:	autoneg_status
+ *	7:	hi_bit_err
+ *	6:	np_rx
+ *	5:	err_counter_full
+ *	4:	fifo_over_underflow
+ *	3:	rx_status
+ *	2:	link_status
+ *	1:	automatic_speed
+ *	0:	int_en
+ */
+
+#define ET_PHY_INT_MASK_AUTONEGSTAT	0x0100
+#define ET_PHY_INT_MASK_LINKSTAT	0x0004
+#define ET_PHY_INT_MASK_ENABLE		0x0001
+
+/* MI Register 25: Interrupt Status Reg(0x19)
+ *	15-10:	reserved
+ *	9:	mdio_sync_lost
+ *	8:	autoneg_status
+ *	7:	hi_bit_err
+ *	6:	np_rx
+ *	5:	err_counter_full
+ *	4:	fifo_over_underflow
+ *	3:	rx_status
+ *	2:	link_status
+ *	1:	automatic_speed
+ *	0:	int_en
+ */
+
+/* MI Register 26: PHY Status Reg(0x1A)
+ *	15:	reserved
+ *	14-13:	autoneg_fault
+ *	12:	autoneg_status
+ *	11:	mdi_x_status
+ *	10:	polarity_status
+ *	9-8:	speed_status
+ *	7:	duplex_status
+ *	6:	link_status
+ *	5:	tx_status
+ *	4:	rx_status
+ *	3:	collision_status
+ *	2:	autoneg_en
+ *	1:	pause_en
+ *	0:	asymmetric_dir
+ */
+#define ET_PHY_AUTONEG_STATUS	0x1000
+#define ET_PHY_POLARITY_STATUS	0x0400
+#define ET_PHY_SPEED_STATUS	0x0300
+#define ET_PHY_DUPLEX_STATUS	0x0080
+#define ET_PHY_LSTATUS		0x0040
+#define ET_PHY_AUTONEG_ENABLE	0x0020
+
+/* MI Register 27: LED Control Reg 1(0x1B)
+ *	15-14:	reserved
+ *	13-12:	led_dup_indicate
+ *	11-10:	led_10baseT
+ *	9-8:	led_collision
+ *	7-4:	reserved
+ *	3-2:	pulse_dur
+ *	1:	pulse_stretch1
+ *	0:	pulse_stretch0
+ */
+
+/* MI Register 28: LED Control Reg 2(0x1C)
+ *	15-12:	led_link
+ *	11-8:	led_tx_rx
+ *	7-4:	led_100BaseTX
+ *	3-0:	led_1000BaseT
+ */
+#define ET_LED2_LED_LINK	0xF000
+#define ET_LED2_LED_TXRX	0x0F00
+#define ET_LED2_LED_100TX	0x00F0
+#define ET_LED2_LED_1000T	0x000F
+
+/* defines for LED control reg 2 values */
+#define LED_VAL_1000BT			0x0
+#define LED_VAL_100BTX			0x1
+#define LED_VAL_10BT			0x2
+#define LED_VAL_1000BT_100BTX		0x3 /* 1000BT on, 100BTX blink */
+#define LED_VAL_LINKON			0x4
+#define LED_VAL_TX			0x5
+#define LED_VAL_RX			0x6
+#define LED_VAL_TXRX			0x7 /* TX or RX */
+#define LED_VAL_DUPLEXFULL		0x8
+#define LED_VAL_COLLISION		0x9
+#define LED_VAL_LINKON_ACTIVE		0xA /* Link on, activity blink */
+#define LED_VAL_LINKON_RECV		0xB /* Link on, receive blink */
+#define LED_VAL_DUPLEXFULL_COLLISION	0xC /* Duplex on, collision blink */
+#define LED_VAL_BLINK			0xD
+#define LED_VAL_ON			0xE
+#define LED_VAL_OFF			0xF
+
+#define LED_LINK_SHIFT			12
+#define LED_TXRX_SHIFT			8
+#define LED_100TX_SHIFT			4
+
+/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */
+
+/* Defines for PHY access routines */
+
+/* Define bit operation flags */
+#define TRUEPHY_BIT_CLEAR               0
+#define TRUEPHY_BIT_SET                 1
+#define TRUEPHY_BIT_READ                2
+
+/* Define read/write operation flags */
+#ifndef TRUEPHY_READ
+#define TRUEPHY_READ                    0
+#define TRUEPHY_WRITE                   1
+#define TRUEPHY_MASK                    2
+#endif
+
+/* Define master/slave configuration values */
+#define TRUEPHY_CFG_SLAVE               0
+#define TRUEPHY_CFG_MASTER              1
+
+/* Define MDI/MDI-X settings */
+#define TRUEPHY_MDI                     0
+#define TRUEPHY_MDIX                    1
+#define TRUEPHY_AUTO_MDI_MDIX           2
+
+/* Define 10Base-T link polarities */
+#define TRUEPHY_POLARITY_NORMAL         0
+#define TRUEPHY_POLARITY_INVERTED       1
+
+/* Define auto-negotiation results */
+#define TRUEPHY_ANEG_NOT_COMPLETE       0
+#define TRUEPHY_ANEG_COMPLETE           1
+#define TRUEPHY_ANEG_DISABLED           2
+
+/* Define duplex advertisement flags */
+#define TRUEPHY_ADV_DUPLEX_NONE         0x00
+#define TRUEPHY_ADV_DUPLEX_FULL         0x01
+#define TRUEPHY_ADV_DUPLEX_HALF         0x02
+#define TRUEPHY_ADV_DUPLEX_BOTH     \
+	(TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF)
+