Staging: epl: run Lindent on *.h files

It's a start, still a mess...

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 88 insertions, 95 deletions

diff --git a/drivers/staging/epl/EplDef.h b/drivers/staging/epl/EplDef.h
index ff704d65ba50..1dc8108449c5 100644
--- a/drivers/staging/epl/EplDef.h
+++ b/drivers/staging/epl/EplDef.h
@@ -66,81 +66,77 @@
 
   2006/05/22 d.k.:   start of the implementation, version 1.00
 
-
 ****************************************************************************/
 
 #ifndef _EPL_DEF_H_
 #define _EPL_DEF_H_
 
-
 //---------------------------------------------------------------------------
 // const defines
 //---------------------------------------------------------------------------
 
-#define EPL_C_ADR_BROADCAST         0xFF // EPL broadcast address
-#define EPL_C_ADR_DIAG_DEF_NODE_ID  0xFD // EPL default address of dignostic device
-#define EPL_C_ADR_DUMMY_NODE_ID     0xFC // EPL dummy node address
-#define EPL_C_ADR_INVALID           0x00 // invalid EPL address
-#define EPL_C_ADR_MN_DEF_NODE_ID    0xF0 // EPL default address of MN
-#define EPL_C_ADR_RT1_DEF_NODE_ID   0xFE // EPL default address of router type 1
-#define EPL_C_DLL_ASND_PRIO_NMTRQST 7    // increased ASnd request priority to be used by NMT Requests
-#define EPL_C_DLL_ASND_PRIO_STD     0    // standard ASnd request priority
+#define EPL_C_ADR_BROADCAST         0xFF	// EPL broadcast address
+#define EPL_C_ADR_DIAG_DEF_NODE_ID  0xFD	// EPL default address of dignostic device
+#define EPL_C_ADR_DUMMY_NODE_ID     0xFC	// EPL dummy node address
+#define EPL_C_ADR_INVALID           0x00	// invalid EPL address
+#define EPL_C_ADR_MN_DEF_NODE_ID    0xF0	// EPL default address of MN
+#define EPL_C_ADR_RT1_DEF_NODE_ID   0xFE	// EPL default address of router type 1
+#define EPL_C_DLL_ASND_PRIO_NMTRQST 7	// increased ASnd request priority to be used by NMT Requests
+#define EPL_C_DLL_ASND_PRIO_STD     0	// standard ASnd request priority
 #define EPL_C_DLL_ETHERTYPE_EPL     0x88AB
-#define EPL_C_DLL_ISOCHR_MAX_PAYL   1490 // Byte: maximum size of PReq and PRes payload data, requires C_IP_MAX_MTU
-#define EPL_C_DLL_MAX_ASYNC_MTU     1500 // Byte: maximum asynchronous payload in bytes
-#define EPL_C_DLL_MAX_PAYL_OFFSET   1499 // Byte: maximum offset of Ethernet frame payload, requires C_IP_MAX_MTU
+#define EPL_C_DLL_ISOCHR_MAX_PAYL   1490	// Byte: maximum size of PReq and PRes payload data, requires C_IP_MAX_MTU
+#define EPL_C_DLL_MAX_ASYNC_MTU     1500	// Byte: maximum asynchronous payload in bytes
+#define EPL_C_DLL_MAX_PAYL_OFFSET   1499	// Byte: maximum offset of Ethernet frame payload, requires C_IP_MAX_MTU
 #define EPL_C_DLL_MAX_RS            7
-#define EPL_C_DLL_MIN_ASYNC_MTU     282  // Byte: minimum asynchronous payload in bytes.
-#define EPL_C_DLL_MIN_PAYL_OFFSET   45   // Byte: minimum offset of Ethernet frame payload
-#define EPL_C_DLL_MULTICAST_ASND    0x01111E000004LL // EPL ASnd multicast MAC address, canonical form
-#define EPL_C_DLL_MULTICAST_PRES    0x01111E000002LL // EPL PRes multicast MAC address, canonical form
-#define EPL_C_DLL_MULTICAST_SOA     0x01111E000003LL // EPL SoA multicast MAC address, canonical form
-#define EPL_C_DLL_MULTICAST_SOC     0x01111E000001LL // EPL Soc multicast MAC address, canonical form
-#define EPL_C_DLL_PREOP1_START_CYCLES 10 // number of unassigning SoA frames at start of NMT_MS_PRE_OPERATIONAL_1
-#define EPL_C_DLL_T_BITTIME         10   // ns: Transmission time per bit on 100 Mbit/s network
-#define EPL_C_DLL_T_EPL_PDO_HEADER  10   // Byte: size of PReq and PRes EPL PDO message header
-#define EPL_C_DLL_T_ETH2_WRAPPER    18   // Byte: size of Ethernet type II wrapper consisting of header and checksum
-#define EPL_C_DLL_T_IFG             640  // ns: Ethernet Interframe Gap
-#define EPL_C_DLL_T_MIN_FRAME       5120 // ns: Size of minimum Ethernet frame (without preamble)
-#define EPL_C_DLL_T_PREAMBLE        960  // ns: Size of Ethernet frame preamble
-
-#define EPL_C_DLL_MINSIZE_SOC       36   // minimum size of SoC without padding and CRC
-#define EPL_C_DLL_MINSIZE_PREQ      60   // minimum size of PRec without CRC
-#define EPL_C_DLL_MINSIZE_PRES      60   // minimum size of PRes without CRC
-#define EPL_C_DLL_MINSIZE_SOA       24   // minimum size of SoA without padding and CRC
-#define EPL_C_DLL_MINSIZE_IDENTRES  176  // minimum size of IdentResponse without CRC
-#define EPL_C_DLL_MINSIZE_STATUSRES 72   // minimum size of StatusResponse without CRC
-#define EPL_C_DLL_MINSIZE_NMTCMD    20   // minimum size of NmtCommand without CommandData, padding and CRC
-#define EPL_C_DLL_MINSIZE_NMTCMDEXT 52   // minimum size of NmtCommand without padding and CRC
-#define EPL_C_DLL_MINSIZE_NMTREQ    20   // minimum size of NmtRequest without CommandData, padding and CRC
-#define EPL_C_DLL_MINSIZE_NMTREQEXT 52   // minimum size of NmtRequest without padding and CRC
-
-#define EPL_C_ERR_MONITOR_DELAY     10   // Error monitoring start delay (not used in DS 1.0.0)
-#define EPL_C_IP_ADR_INVALID        0x00000000L // invalid IP address (0.0.0.0) used to indicate no change
-#define EPL_C_IP_INVALID_MTU        0    // Byte: invalid MTU size used to indicate no change
-#define EPL_C_IP_MAX_MTU            1518 // Byte: maximum size in bytes of the IP stack which must be processed.
-#define EPL_C_IP_MIN_MTU            300  // Byte: minimum size in bytes of the IP stack which must be processed.
-#define EPL_C_NMT_STATE_TOLERANCE   5    // Cycles: maximum reaction time to NMT state commands
-#define EPL_C_NMT_STATREQ_CYCLE     5    // sec: StatusRequest cycle time to be applied to AsyncOnly CNs
+#define EPL_C_DLL_MIN_ASYNC_MTU     282	// Byte: minimum asynchronous payload in bytes.
+#define EPL_C_DLL_MIN_PAYL_OFFSET   45	// Byte: minimum offset of Ethernet frame payload
+#define EPL_C_DLL_MULTICAST_ASND    0x01111E000004LL	// EPL ASnd multicast MAC address, canonical form
+#define EPL_C_DLL_MULTICAST_PRES    0x01111E000002LL	// EPL PRes multicast MAC address, canonical form
+#define EPL_C_DLL_MULTICAST_SOA     0x01111E000003LL	// EPL SoA multicast MAC address, canonical form
+#define EPL_C_DLL_MULTICAST_SOC     0x01111E000001LL	// EPL Soc multicast MAC address, canonical form
+#define EPL_C_DLL_PREOP1_START_CYCLES 10	// number of unassigning SoA frames at start of NMT_MS_PRE_OPERATIONAL_1
+#define EPL_C_DLL_T_BITTIME         10	// ns: Transmission time per bit on 100 Mbit/s network
+#define EPL_C_DLL_T_EPL_PDO_HEADER  10	// Byte: size of PReq and PRes EPL PDO message header
+#define EPL_C_DLL_T_ETH2_WRAPPER    18	// Byte: size of Ethernet type II wrapper consisting of header and checksum
+#define EPL_C_DLL_T_IFG             640	// ns: Ethernet Interframe Gap
+#define EPL_C_DLL_T_MIN_FRAME       5120	// ns: Size of minimum Ethernet frame (without preamble)
+#define EPL_C_DLL_T_PREAMBLE        960	// ns: Size of Ethernet frame preamble
+
+#define EPL_C_DLL_MINSIZE_SOC       36	// minimum size of SoC without padding and CRC
+#define EPL_C_DLL_MINSIZE_PREQ      60	// minimum size of PRec without CRC
+#define EPL_C_DLL_MINSIZE_PRES      60	// minimum size of PRes without CRC
+#define EPL_C_DLL_MINSIZE_SOA       24	// minimum size of SoA without padding and CRC
+#define EPL_C_DLL_MINSIZE_IDENTRES  176	// minimum size of IdentResponse without CRC
+#define EPL_C_DLL_MINSIZE_STATUSRES 72	// minimum size of StatusResponse without CRC
+#define EPL_C_DLL_MINSIZE_NMTCMD    20	// minimum size of NmtCommand without CommandData, padding and CRC
+#define EPL_C_DLL_MINSIZE_NMTCMDEXT 52	// minimum size of NmtCommand without padding and CRC
+#define EPL_C_DLL_MINSIZE_NMTREQ    20	// minimum size of NmtRequest without CommandData, padding and CRC
+#define EPL_C_DLL_MINSIZE_NMTREQEXT 52	// minimum size of NmtRequest without padding and CRC
+
+#define EPL_C_ERR_MONITOR_DELAY     10	// Error monitoring start delay (not used in DS 1.0.0)
+#define EPL_C_IP_ADR_INVALID        0x00000000L	// invalid IP address (0.0.0.0) used to indicate no change
+#define EPL_C_IP_INVALID_MTU        0	// Byte: invalid MTU size used to indicate no change
+#define EPL_C_IP_MAX_MTU            1518	// Byte: maximum size in bytes of the IP stack which must be processed.
+#define EPL_C_IP_MIN_MTU            300	// Byte: minimum size in bytes of the IP stack which must be processed.
+#define EPL_C_NMT_STATE_TOLERANCE   5	// Cycles: maximum reaction time to NMT state commands
+#define EPL_C_NMT_STATREQ_CYCLE     5	// sec: StatusRequest cycle time to be applied to AsyncOnly CNs
 #define EPL_C_SDO_EPL_PORT          3819
 
-#define EPL_C_DLL_MAX_ASND_SERVICE_IDS  5   // see tEplDllAsndServiceId in EplDll.h
-
-
+#define EPL_C_DLL_MAX_ASND_SERVICE_IDS  5	// see tEplDllAsndServiceId in EplDll.h
 
 // Default configuration
 // ======================
 
 #ifndef EPL_D_PDO_Granularity_U8
-#define EPL_D_PDO_Granularity_U8    8    // minimum size of objects to be mapped in bits UNSIGNED8 O O 1 1
+#define EPL_D_PDO_Granularity_U8    8	// minimum size of objects to be mapped in bits UNSIGNED8 O O 1 1
 #endif
 
 #ifndef EPL_NMT_MAX_NODE_ID
-#define EPL_NMT_MAX_NODE_ID         254  // maximum node-ID
+#define EPL_NMT_MAX_NODE_ID         254	// maximum node-ID
 #endif
 
 #ifndef EPL_D_NMT_MaxCNNumber_U8
-#define EPL_D_NMT_MaxCNNumber_U8    239  // maximum number of supported regular CNs in the Node ID range 1 .. 239 UNSIGNED8 O O 239 239
+#define EPL_D_NMT_MaxCNNumber_U8    239	// maximum number of supported regular CNs in the Node ID range 1 .. 239 UNSIGNED8 O O 239 239
 #endif
 
 // defines for EPL API layer static process image
@@ -162,7 +158,7 @@
 #endif
 
 #ifndef EPL_OBD_MAX_STRING_SIZE
-#define EPL_OBD_MAX_STRING_SIZE        32          // is used for objects 0x1008/0x1009/0x100A
+#define EPL_OBD_MAX_STRING_SIZE        32	// is used for objects 0x1008/0x1009/0x100A
 #endif
 
 #ifndef EPL_OBD_USE_STORE_RESTORE
@@ -194,7 +190,7 @@
 #endif
 
 #ifndef EPL_VETH_NAME
-#define EPL_VETH_NAME       "epl"   // name of net device in Linux
+#define EPL_VETH_NAME       "epl"	// name of net device in Linux
 #endif
 
 /*
@@ -303,60 +299,57 @@
 #define EPL_E_DLL_LOSS_SOA_TH           0x8244
 #define EPL_E_DLL_LOSS_SOC_TH           0x8245
 // 0x84xx BootUp Errors
-#define EPL_E_NMT_BA1                   0x8410  // other MN in MsNotActive active
-#define EPL_E_NMT_BA1_NO_MN_SUPPORT     0x8411  // MN is not supported
-#define EPL_E_NMT_BPO1                  0x8420  // mandatory CN was not found or failed in BootStep1
-#define EPL_E_NMT_BPO1_GET_IDENT        0x8421  // IdentRes was not received
-#define EPL_E_NMT_BPO1_DEVICE_TYPE      0x8422  // wrong device type
-#define EPL_E_NMT_BPO1_VENDOR_ID        0x8423  // wrong vendor ID
-#define EPL_E_NMT_BPO1_PRODUCT_CODE     0x8424  // wrong product code
-#define EPL_E_NMT_BPO1_REVISION_NO      0x8425  // wrong revision number
-#define EPL_E_NMT_BPO1_SERIAL_NO        0x8426  // wrong serial number
-#define EPL_E_NMT_BPO1_CF_VERIFY        0x8428  // verification of configuration failed
-#define EPL_E_NMT_BPO2                  0x8430  // mandatory CN failed in BootStep2
-#define EPL_E_NMT_BRO                   0x8440  // CheckCommunication failed for mandatory CN
-#define EPL_E_NMT_WRONG_STATE           0x8480  // mandatory CN has wrong NMT state
+#define EPL_E_NMT_BA1                   0x8410	// other MN in MsNotActive active
+#define EPL_E_NMT_BA1_NO_MN_SUPPORT     0x8411	// MN is not supported
+#define EPL_E_NMT_BPO1                  0x8420	// mandatory CN was not found or failed in BootStep1
+#define EPL_E_NMT_BPO1_GET_IDENT        0x8421	// IdentRes was not received
+#define EPL_E_NMT_BPO1_DEVICE_TYPE      0x8422	// wrong device type
+#define EPL_E_NMT_BPO1_VENDOR_ID        0x8423	// wrong vendor ID
+#define EPL_E_NMT_BPO1_PRODUCT_CODE     0x8424	// wrong product code
+#define EPL_E_NMT_BPO1_REVISION_NO      0x8425	// wrong revision number
+#define EPL_E_NMT_BPO1_SERIAL_NO        0x8426	// wrong serial number
+#define EPL_E_NMT_BPO1_CF_VERIFY        0x8428	// verification of configuration failed
+#define EPL_E_NMT_BPO2                  0x8430	// mandatory CN failed in BootStep2
+#define EPL_E_NMT_BRO                   0x8440	// CheckCommunication failed for mandatory CN
+#define EPL_E_NMT_WRONG_STATE           0x8480	// mandatory CN has wrong NMT state
 
 // Defines for object 0x1F80 NMT_StartUp_U32
 // ==========================================
-#define EPL_NMTST_STARTALLNODES         0x00000002L // Bit 1
-#define EPL_NMTST_NO_AUTOSTART          0x00000004L // Bit 2
-#define EPL_NMTST_NO_STARTNODE          0x00000008L // Bit 3
-#define EPL_NMTST_RESETALL_MAND_CN      0x00000010L // Bit 4
-#define EPL_NMTST_STOPALL_MAND_CN       0x00000040L // Bit 6
-#define EPL_NMTST_NO_AUTOPREOP2         0x00000080L // Bit 7
-#define EPL_NMTST_NO_AUTOREADYTOOP      0x00000100L // Bit 8
-#define EPL_NMTST_EXT_CNIDENTCHECK      0x00000200L // Bit 9
-#define EPL_NMTST_SWVERSIONCHECK        0x00000400L // Bit 10
-#define EPL_NMTST_CONFCHECK             0x00000800L // Bit 11
-#define EPL_NMTST_NO_RETURN_PREOP1      0x00001000L // Bit 12
-#define EPL_NMTST_BASICETHERNET         0x00002000L // Bit 13
+#define EPL_NMTST_STARTALLNODES         0x00000002L	// Bit 1
+#define EPL_NMTST_NO_AUTOSTART          0x00000004L	// Bit 2
+#define EPL_NMTST_NO_STARTNODE          0x00000008L	// Bit 3
+#define EPL_NMTST_RESETALL_MAND_CN      0x00000010L	// Bit 4
+#define EPL_NMTST_STOPALL_MAND_CN       0x00000040L	// Bit 6
+#define EPL_NMTST_NO_AUTOPREOP2         0x00000080L	// Bit 7
+#define EPL_NMTST_NO_AUTOREADYTOOP      0x00000100L	// Bit 8
+#define EPL_NMTST_EXT_CNIDENTCHECK      0x00000200L	// Bit 9
+#define EPL_NMTST_SWVERSIONCHECK        0x00000400L	// Bit 10
+#define EPL_NMTST_CONFCHECK             0x00000800L	// Bit 11
+#define EPL_NMTST_NO_RETURN_PREOP1      0x00001000L	// Bit 12
+#define EPL_NMTST_BASICETHERNET         0x00002000L	// Bit 13
 
 // Defines for object 0x1F81 NMT_NodeAssignment_AU32
 // ==================================================
-#define EPL_NODEASSIGN_NODE_EXISTS      0x00000001L // Bit 0
-#define EPL_NODEASSIGN_NODE_IS_CN       0x00000002L // Bit 1
-#define EPL_NODEASSIGN_START_CN         0x00000004L // Bit 2
-#define EPL_NODEASSIGN_MANDATORY_CN     0x00000008L // Bit 3
-#define EPL_NODEASSIGN_KEEPALIVE        0x00000010L //currently not used in EPL V2 standard
-#define EPL_NODEASSIGN_SWVERSIONCHECK   0x00000020L // Bit 5
-#define EPL_NODEASSIGN_SWUPDATE         0x00000040L // Bit 6
-#define EPL_NODEASSIGN_ASYNCONLY_NODE   0x00000100L // Bit 8
-#define EPL_NODEASSIGN_MULTIPLEXED_CN   0x00000200L // Bit 9
-#define EPL_NODEASSIGN_RT1              0x00000400L // Bit 10
-#define EPL_NODEASSIGN_RT2              0x00000800L // Bit 11
-#define EPL_NODEASSIGN_MN_PRES          0x00001000L // Bit 12
-#define EPL_NODEASSIGN_VALID            0x80000000L // Bit 31
+#define EPL_NODEASSIGN_NODE_EXISTS      0x00000001L	// Bit 0
+#define EPL_NODEASSIGN_NODE_IS_CN       0x00000002L	// Bit 1
+#define EPL_NODEASSIGN_START_CN         0x00000004L	// Bit 2
+#define EPL_NODEASSIGN_MANDATORY_CN     0x00000008L	// Bit 3
+#define EPL_NODEASSIGN_KEEPALIVE        0x00000010L	//currently not used in EPL V2 standard
+#define EPL_NODEASSIGN_SWVERSIONCHECK   0x00000020L	// Bit 5
+#define EPL_NODEASSIGN_SWUPDATE         0x00000040L	// Bit 6
+#define EPL_NODEASSIGN_ASYNCONLY_NODE   0x00000100L	// Bit 8
+#define EPL_NODEASSIGN_MULTIPLEXED_CN   0x00000200L	// Bit 9
+#define EPL_NODEASSIGN_RT1              0x00000400L	// Bit 10
+#define EPL_NODEASSIGN_RT2              0x00000800L	// Bit 11
+#define EPL_NODEASSIGN_MN_PRES          0x00001000L	// Bit 12
+#define EPL_NODEASSIGN_VALID            0x80000000L	// Bit 31
 
 //---------------------------------------------------------------------------
 // typedef
 //---------------------------------------------------------------------------
 
-
-
 //---------------------------------------------------------------------------
 // function prototypes
 //---------------------------------------------------------------------------
 
-
-#endif  // #ifndef _EPL_DEF_H_
+#endif // #ifndef _EPL_DEF_H_