staging: PCI bus interface for the DWC2 driver

This file contains the PCI bus interface "glue" for the DWC2 driver

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 198 insertions, 0 deletions

diff --git a/drivers/staging/dwc2/pci.c b/drivers/staging/dwc2/pci.c
new file mode 100644
index 000000000000..117d3ce404dd
--- /dev/null
+++ b/drivers/staging/dwc2/pci.c
@@ -0,0 +1,198 @@
+/*
+ * pci.c - DesignWare HS OTG Controller PCI driver
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Provides the initialization and cleanup entry points for the DWC_otg PCI
+ * driver
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
+#define PCI_PRODUCT_ID_HAPS_HSOTG	0xabc0
+
+static const char dwc2_driver_name[] = "dwc_otg";
+
+static struct dwc2_core_params dwc2_module_params = {
+	.otg_cap			= -1,
+	.otg_ver			= -1,
+	.dma_enable			= -1,
+	.dma_desc_enable		= 0,
+	.speed				= -1,
+	.enable_dynamic_fifo		= -1,
+	.en_multiple_tx_fifo		= -1,
+	.host_rx_fifo_size		= 1024,
+	.host_nperio_tx_fifo_size	= 256,
+	.host_perio_tx_fifo_size	= 1024,
+	.max_transfer_size		= 65535,
+	.max_packet_count		= 511,
+	.host_channels			= -1,
+	.phy_type			= -1,
+	.phy_utmi_width			= 16,	/* 16 bits - NOT DETECTABLE */
+	.phy_ulpi_ddr			= -1,
+	.phy_ulpi_ext_vbus		= -1,
+	.i2c_enable			= -1,
+	.ulpi_fs_ls			= -1,
+	.host_support_fs_ls_low_power	= -1,
+	.host_ls_low_power_phy_clk	= -1,
+	.ts_dline			= -1,
+	.reload_ctl			= -1,
+	.ahb_single			= -1,
+};
+
+/**
+ * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
+ * DWC_otg driver
+ *
+ * @dev: Bus device
+ *
+ * This routine is called, for example, when the rmmod command is executed. The
+ * device may or may not be electrically present. If it is present, the driver
+ * stops device processing. Any resources used on behalf of this device are
+ * freed.
+ */
+static void dwc2_driver_remove(struct pci_dev *dev)
+{
+	struct dwc2_hsotg *hsotg = pci_get_drvdata(dev);
+
+	dev_dbg(&dev->dev, "%s(%p)\n", __func__, dev);
+
+	dwc2_hcd_remove(&dev->dev, hsotg);
+	pci_disable_device(dev);
+}
+
+/**
+ * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
+ * driver
+ *
+ * @dev: Bus device
+ *
+ * This routine creates the driver components required to control the device
+ * (core, HCD, and PCD) and initializes the device. The driver components are
+ * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
+ * in the device private data. This allows the driver to access the dwc2_hsotg
+ * structure on subsequent calls to driver methods for this device.
+ */
+static int dwc2_driver_probe(struct pci_dev *dev,
+			     const struct pci_device_id *id)
+{
+	struct dwc2_hsotg *hsotg;
+	int retval;
+
+	dev_dbg(&dev->dev, "%s(%p)\n", __func__, dev);
+
+	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
+	if (!hsotg)
+		return -ENOMEM;
+
+	pci_set_power_state(dev, PCI_D0);
+
+	hsotg->regs = devm_request_and_ioremap(&dev->dev, &dev->resource[0]);
+	if (!hsotg->regs)
+		return -ENOMEM;
+
+	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
+		(unsigned long)pci_resource_start(dev, 0), hsotg->regs);
+
+	if (pci_enable_device(dev) < 0)
+		return -ENODEV;
+
+	pci_set_master(dev);
+
+	if (dwc2_module_params.dma_enable > 0) {
+		if (pci_set_dma_mask(dev, DMA_BIT_MASK(31)) < 0)
+			dev_warn(&dev->dev,
+				 "can't enable workaround for >2GB RAM\n");
+		if (pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(31)) < 0)
+			dev_warn(&dev->dev,
+				 "can't enable workaround for >2GB RAM\n");
+	} else {
+		pci_set_dma_mask(dev, 0);
+		pci_set_consistent_dma_mask(dev, 0);
+	}
+
+	retval = dwc2_hcd_init(&dev->dev, hsotg, dev->irq, &dwc2_module_params);
+	if (retval) {
+		pci_disable_device(dev);
+		return retval;
+	}
+
+	pci_set_drvdata(dev, hsotg);
+	dev_dbg(&dev->dev, "hsotg=%p\n", hsotg);
+
+	dev_dbg(&dev->dev, "registering common handler for irq%d\n", dev->irq);
+	retval = devm_request_irq(&dev->dev, dev->irq, dwc2_handle_common_intr,
+				  IRQF_SHARED | IRQ_LEVEL, dev_name(&dev->dev),
+				  hsotg);
+	if (retval)
+		dwc2_hcd_remove(&dev->dev, hsotg);
+
+	return retval;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dwc2_pci_ids) = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
+	},
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
+
+static struct pci_driver dwc2_pci_driver = {
+	.name = dwc2_driver_name,
+	.id_table = dwc2_pci_ids,
+	.probe = dwc2_driver_probe,
+	.remove = dwc2_driver_remove,
+};
+
+module_pci_driver(dwc2_pci_driver);
+
+MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue");
+MODULE_AUTHOR("Synopsys, Inc.");
+MODULE_LICENSE("Dual BSD/GPL");