staging: comedi: drivers: use comedi_dio_insn_config() for simple cases

Convert the drivers with simple, per channel programmable i/o, to use the
comedi_dio_insn_config() helper function.

All of these pass a 'mask' of '0' to comedi_dio_insn_config() this causes
the per channel mask to be used to configure the i/o direction.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

12 files changed, 113 insertions, 301 deletions

diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index e6e456163a29..388dbd7a5d27 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -3510,31 +3510,20 @@ static int do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
 
 static int dio_60xx_config_insn(struct comedi_device *dev,
 				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
+				struct comedi_insn *insn,
+				unsigned int *data)
 {
 	struct pcidas64_private *devpriv = dev->private;
-	unsigned int mask;
-
-	mask = 1 << CR_CHAN(insn->chanspec);
+	int ret;
 
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~mask;
-		break;
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= mask;
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return 2;
-	default:
-		return -EINVAL;
-	}
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
 	writeb(s->io_bits,
 	       devpriv->dio_counter_iobase + DIO_DIRECTION_60XX_REG);
 
-	return 1;
+	return insn->n;
 }
 
 static int dio_60xx_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index 02016258bd4e..e2926ce3fb24 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -158,27 +158,16 @@ static int ni_670x_dio_insn_bits(struct comedi_device *dev,
 
 static int ni_670x_dio_insn_config(struct comedi_device *dev,
 				   struct comedi_subdevice *s,
-				   struct comedi_insn *insn, unsigned int *data)
+				   struct comedi_insn *insn,
+				   unsigned int *data)
 {
 	struct ni_670x_private *devpriv = dev->private;
-	int chan = CR_CHAN(insn->chanspec);
+	int ret;
+
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= 1 << chan;
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~(1 << chan);
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] =
-		    (s->io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return insn->n;
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
 	writel(s->io_bits, devpriv->mite->daq_io_addr + DIO_PORT0_DIR_OFFSET);
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 41659652a491..404f83de276d 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -90,21 +90,17 @@ static int daq700_dio_insn_bits(struct comedi_device *dev,
 
 static int daq700_dio_insn_config(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
-	unsigned int chan = 1 << CR_CHAN(insn->chanspec);
-
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_INPUT:
-		break;
-	case INSN_CONFIG_DIO_OUTPUT:
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = (s->io_bits & chan) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		break;
-	default:
-		return -EINVAL;
-	}
+	int ret;
+
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
+
+	/* The DIO channels are not configurable, fix the io_bits */
+	s->io_bits = 0x00ff;
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 04f4b7dce332..4e02770e834b 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -3528,37 +3528,21 @@ static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s)
 
 static int ni_dio_insn_config(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data)
+			      struct comedi_insn *insn,
+			      unsigned int *data)
 {
 	struct ni_private *devpriv = dev->private;
+	int ret;
 
-#ifdef DEBUG_DIO
-	printk("ni_dio_insn_config() chan=%d io=%d\n",
-	       CR_CHAN(insn->chanspec), data[0]);
-#endif
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= 1 << CR_CHAN(insn->chanspec);
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~(1 << CR_CHAN(insn->chanspec));
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] =
-		    (s->
-		     io_bits & (1 << CR_CHAN(insn->chanspec))) ? COMEDI_OUTPUT :
-		    COMEDI_INPUT;
-		return insn->n;
-		break;
-	default:
-		return -EINVAL;
-	}
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
 	devpriv->dio_control &= ~DIO_Pins_Dir_Mask;
 	devpriv->dio_control |= DIO_Pins_Dir(s->io_bits);
 	devpriv->stc_writew(dev, devpriv->dio_control, DIO_Control_Register);
 
-	return 1;
+	return insn->n;
 }
 
 static int ni_dio_insn_bits(struct comedi_device *dev,
@@ -3596,32 +3580,15 @@ static int ni_m_series_dio_insn_config(struct comedi_device *dev,
 				       unsigned int *data)
 {
 	struct ni_private *devpriv __maybe_unused = dev->private;
+	int ret;
 
-#ifdef DEBUG_DIO
-	printk("ni_m_series_dio_insn_config() chan=%d io=%d\n",
-	       CR_CHAN(insn->chanspec), data[0]);
-#endif
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= 1 << CR_CHAN(insn->chanspec);
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~(1 << CR_CHAN(insn->chanspec));
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] =
-		    (s->
-		     io_bits & (1 << CR_CHAN(insn->chanspec))) ? COMEDI_OUTPUT :
-		    COMEDI_INPUT;
-		return insn->n;
-		break;
-	default:
-		return -EINVAL;
-	}
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
 	ni_writel(s->io_bits, M_Offset_DIO_Direction);
 
-	return 1;
+	return insn->n;
 }
 
 static int ni_m_series_dio_insn_bits(struct comedi_device *dev,
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 8ac7a7cce0e6..fad81bc97b6e 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -640,32 +640,19 @@ static void debug_int(struct comedi_device *dev)
 
 static int ni_pcidio_insn_config(struct comedi_device *dev,
 				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data)
+				 struct comedi_insn *insn,
+				 unsigned int *data)
 {
 	struct nidio96_private *devpriv = dev->private;
+	int ret;
+
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
-	if (insn->n != 1)
-		return -EINVAL;
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= 1 << CR_CHAN(insn->chanspec);
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~(1 << CR_CHAN(insn->chanspec));
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] =
-		    (s->
-		     io_bits & (1 << CR_CHAN(insn->chanspec))) ? COMEDI_OUTPUT :
-		    COMEDI_INPUT;
-		return insn->n;
-		break;
-	default:
-		return -EINVAL;
-	}
 	writel(s->io_bits, devpriv->mite->daq_io_addr + Port_Pin_Directions(0));
 
-	return 1;
+	return insn->n;
 }
 
 static int ni_pcidio_insn_bits(struct comedi_device *dev,
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index fab93a73651d..aa3c0307483d 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -310,68 +310,27 @@ static int pcmmio_dio_insn_bits(struct comedi_device *dev,
 	return insn->n;
 }
 
-/* The input or output configuration of each digital line is
- * configured by a special insn_config instruction.  chanspec
- * contains the channel to be changed, and data[0] contains the
- * value COMEDI_INPUT or COMEDI_OUTPUT. */
 static int pcmmio_dio_insn_config(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
-	int chan = CR_CHAN(insn->chanspec), byte_no = chan / 8, bit_no =
-	    chan % 8;
-	unsigned long ioaddr;
-	unsigned char byte;
-
-	/* Compute ioaddr for this channel */
-	ioaddr = subpriv->iobases[byte_no];
-
-	/* NOTE:
-	   writing a 0 an IO channel's bit sets the channel to INPUT
-	   and pulls the line high as well
-
-	   writing a 1 to an IO channel's  bit pulls the line low
-
-	   All channels are implicitly always in OUTPUT mode -- but when
-	   they are high they can be considered to be in INPUT mode..
-
-	   Thus, we only force channels low if the config request was INPUT,
-	   otherwise we do nothing to the hardware.    */
-
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		/* save to io_bits -- don't actually do anything since
-		   all input channels are also output channels... */
-		s->io_bits |= 1 << chan;
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		/* write a 0 to the actual register representing the channel
-		   to set it to 'input'.  0 means "float high". */
-		byte = inb(ioaddr);
-		byte &= ~(1 << bit_no);
-				/**< set input channel to '0' */
-
-		/*
-		 * write out byte -- this is the only time we actually affect
-		 * the hardware as all channels are implicitly output
-		 * -- but input channels are set to float-high
-		 */
-		outb(byte, ioaddr);
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	int byte_no = chan / 8;
+	int bit_no = chan % 8;
+	int ret;
 
-		/* save to io_bits */
-		s->io_bits &= ~(1 << chan);
-		break;
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
-	case INSN_CONFIG_DIO_QUERY:
-		/* retrieve from shadow register */
-		data[1] =
-		    (s->io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return insn->n;
-		break;
+	if (data[0] == INSN_CONFIG_DIO_INPUT) {
+		unsigned long ioaddr = subpriv->iobases[byte_no];
+		unsigned char val;
 
-	default:
-		return -EINVAL;
-		break;
+		val = inb(ioaddr);
+		val &= ~(1 << bit_no);
+		outb(val, ioaddr);
 	}
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 13f1943f5b8b..f9424554539d 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -233,27 +233,19 @@ static int pcmuio_dio_insn_bits(struct comedi_device *dev,
 
 static int pcmuio_dio_insn_config(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
+				  struct comedi_insn *insn,
+				  unsigned int *data)
 {
-	unsigned int chan_mask = 1 << CR_CHAN(insn->chanspec);
 	int asic = s->index / 2;
 	int port = (s->index % 2) ? 3 : 0;
+	int ret;
 
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= chan_mask;
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~chan_mask;
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
+
+	if (data[0] == INSN_CONFIG_DIO_INPUT)
 		pcmuio_write(dev, s->io_bits, asic, 0, port);
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = (s->io_bits & chan_mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
 
 	return insn->n;
 }
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 635c8f5cd8f6..93c980c62a23 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -1238,23 +1238,11 @@ static int rtd_dio_insn_config(struct comedi_device *dev,
 			       unsigned int *data)
 {
 	struct rtd_private *devpriv = dev->private;
-	unsigned int chan = CR_CHAN(insn->chanspec);
-	unsigned int mask = 1 << chan;
+	int ret;
 
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= mask;
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~mask;
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return insn->n;
-		break;
-	default:
-		return -EINVAL;
-	}
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
 	/* TODO support digital match interrupts and strobes */
 
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index b0ba9b9b433b..d22b95dcb9bd 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -1662,24 +1662,12 @@ static int s626_dio_insn_config(struct comedi_device *dev,
 				unsigned int *data)
 {
 	unsigned long group = (unsigned long)s->private;
-	unsigned int chan = CR_CHAN(insn->chanspec);
-	unsigned int mask = 1 << chan;
+	int ret;
+
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return insn->n;
-		break;
-	case COMEDI_INPUT:
-		s->io_bits &= ~mask;
-		break;
-	case COMEDI_OUTPUT:
-		s->io_bits |= mask;
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
 	DEBIwrite(dev, LP_WRDOUT(group), s->io_bits);
 
 	return insn->n;
diff --git a/drivers/staging/comedi/drivers/ssv_dnp.c b/drivers/staging/comedi/drivers/ssv_dnp.c
index 4da4d3208fdb..11758a515c1b 100644
--- a/drivers/staging/comedi/drivers/ssv_dnp.c
+++ b/drivers/staging/comedi/drivers/ssv_dnp.c
@@ -93,68 +93,48 @@ static int dnp_dio_insn_bits(struct comedi_device *dev,
 
 }
 
-/* ------------------------------------------------------------------------- */
-/* Configure the direction of the bidirectional digital i/o pins. chanspec   */
-/* contains the channel to be changed and data[0] contains either            */
-/* COMEDI_INPUT or COMEDI_OUTPUT.                                            */
-/* ------------------------------------------------------------------------- */
-
 static int dnp_dio_insn_config(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
+			       struct comedi_insn *insn,
+			       unsigned int *data)
 {
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int mask;
+	unsigned int val;
+	int ret;
 
-	u8 register_buffer;
-
-	/* reduces chanspec to lower 16 bits */
-	int chan = CR_CHAN(insn->chanspec);
-
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-	case INSN_CONFIG_DIO_INPUT:
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] =
-		    (inb(CSCDR) & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return insn->n;
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
-	/* Test: which port does the channel belong to?                       */
-
-	/* We have to pay attention with port C: this is the meaning of PCMR: */
-	/* Bit in PCMR:              7 6 5 4 3 2 1 0                          */
-	/* Corresponding port C pin: d 3 d 2 d 1 d 0   d= don't touch         */
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
-	if ((chan >= 0) && (chan <= 7)) {
-		/* this is port A */
+	if (chan < 8) {			/* Port A */
+		mask = 1 << chan;
 		outb(PAMR, CSCIR);
-	} else if ((chan >= 8) && (chan <= 15)) {
-		/* this is port B */
-		chan -= 8;
+	} else if (chan < 16) {		/* Port B */
+		mask = 1 << (chan - 8);
 		outb(PBMR, CSCIR);
-	} else if ((chan >= 16) && (chan <= 19)) {
-		/* this is port C; multiplication with 2 brings bits into     */
-		/* correct position for PCMR!                                 */
-		chan -= 16;
-		chan *= 2;
+	} else {			/* Port C */
+		/*
+		 * We have to pay attention with port C.
+		 * This is the meaning of PCMR:
+		 *   Bit in PCMR:              7 6 5 4 3 2 1 0
+		 *   Corresponding port C pin: d 3 d 2 d 1 d 0   d= don't touch
+		 *
+		 * Multiplication by 2 brings bits into correct position
+		 * for PCMR!
+		 */
+		mask = 1 << ((chan - 16) * 2);
 		outb(PCMR, CSCIR);
-	} else {
-		return -EINVAL;
 	}
 
-	/* read 'old' direction of the port and set bits (out=1, in=0)        */
-	register_buffer = inb(CSCDR);
+	val = inb(CSCDR);
 	if (data[0] == COMEDI_OUTPUT)
-		register_buffer |= (1 << chan);
+		val |= mask;
 	else
-		register_buffer &= ~(1 << chan);
-
-	outb(register_buffer, CSCDR);
+		val &= ~mask;
+	outb(val, CSCDR);
 
-	return 1;
+	return insn->n;
 
 }
 
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 689b45276e8d..7e91f1506a39 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -1113,22 +1113,11 @@ static int usbdux_dio_insn_config(struct comedi_device *dev,
 				  struct comedi_insn *insn,
 				  unsigned int *data)
 {
-	unsigned int mask = 1 << CR_CHAN(insn->chanspec);
+	int ret;
 
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= mask;
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~mask;
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
 	/*
 	 * We don't tell the firmware here as it would take 8 frames
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index fca89c367a68..c47f4087568f 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -1040,23 +1040,11 @@ static int usbduxsigma_dio_insn_config(struct comedi_device *dev,
 				       struct comedi_insn *insn,
 				       unsigned int *data)
 {
-	unsigned int chan = CR_CHAN(insn->chanspec);
-	unsigned int mask = 1 << chan;
+	int ret;
 
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits |= mask;
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits &= ~mask;
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
+	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
+	if (ret)
+		return ret;
 
 	/*
 	 * We don't tell the firmware here as it would take 8 frames