staging: brcm80211: cleaned bcmdefs.h

Code cleanup.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 2 insertions, 106 deletions

diff --git a/drivers/staging/brcm80211/include/bcmdefs.h b/drivers/staging/brcm80211/include/bcmdefs.h
index 76138458c620..cf9dc0e132d4 100644
--- a/drivers/staging/brcm80211/include/bcmdefs.h
+++ b/drivers/staging/brcm80211/include/bcmdefs.h
@@ -25,7 +25,6 @@
 #define USB_BUS			5
 #define SPI_BUS			6
 
-
 #ifndef OFF
 #define	OFF	0
 #endif
@@ -36,96 +35,6 @@
 
 #define	AUTO	(-1)		/* Auto = -1 */
 
-/* Bus types */
-#define	SI_BUS			0	/* SOC Interconnect */
-#define	PCI_BUS			1	/* PCI target */
-#define SDIO_BUS		3	/* SDIO target */
-#define JTAG_BUS		4	/* JTAG */
-#define USB_BUS			5	/* USB (does not support R/W REG) */
-#define SPI_BUS			6	/* gSPI target */
-#define RPC_BUS			7	/* RPC target */
-
-
-/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
-#define DMADDR_MASK_32 0x0	/* Address mask for 32-bits */
-#define DMADDR_MASK_30 0xc0000000	/* Address mask for 30-bits */
-#define DMADDR_MASK_0  0xffffffff	/* Address mask for 0-bits (hi-part) */
-
-#define	DMADDRWIDTH_30  30	/* 30-bit addressing capability */
-#define	DMADDRWIDTH_32  32	/* 32-bit addressing capability */
-#define	DMADDRWIDTH_63  63	/* 64-bit addressing capability */
-#define	DMADDRWIDTH_64  64	/* 64-bit addressing capability */
-
-#ifdef BCMDMA64OSL
-typedef struct {
-	u32 loaddr;
-	u32 hiaddr;
-} dma64addr_t;
-
-typedef dma64addr_t dmaaddr_t;
-#define PHYSADDRHI(_pa) ((_pa).hiaddr)
-#define PHYSADDRHISET(_pa, _val) \
-	do { \
-		(_pa).hiaddr = (_val);		\
-	} while (0)
-#define PHYSADDRLO(_pa) ((_pa).loaddr)
-#define PHYSADDRLOSET(_pa, _val) \
-	do { \
-		(_pa).loaddr = (_val);		\
-	} while (0)
-
-#else
-typedef unsigned long dmaaddr_t;
-#define PHYSADDRHI(_pa) (0)
-#define PHYSADDRHISET(_pa, _val)
-#define PHYSADDRLO(_pa) ((_pa))
-#define PHYSADDRLOSET(_pa, _val) \
-	do { \
-		(_pa) = (_val);			\
-	} while (0)
-#endif				/* BCMDMA64OSL */
-
-/* One physical DMA segment */
-typedef struct {
-	dmaaddr_t addr;
-	u32 length;
-} dma_seg_t;
-
-#define MAX_DMA_SEGS 4
-
-typedef struct {
-	void *oshdmah;		/* Opaque handle for OSL to store its information */
-	uint origsize;		/* Size of the virtual packet */
-	uint nsegs;
-	dma_seg_t segs[MAX_DMA_SEGS];
-} dma_seg_map_t;
-
-/* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF).
- * By doing, we avoid the need  to allocate an extra buffer for the header when bridging to WL.
- * There is a compile time check in wlc.c which ensure that this value is at least as big
- * as TXOFF. This value is used in dma_rxfill (dma.c).
- */
-
-#define BCMEXTRAHDROOM 172
-
-/* Macros for doing definition and get/set of bitfields
- * Usage example, e.g. a three-bit field (bits 4-6):
- *    #define <NAME>_M	BITFIELD_MASK(3)
- *    #define <NAME>_S	4
- * ...
- *    regval = R_REG(osh, &regs->regfoo);
- *    field = GFIELD(regval, <NAME>);
- *    regval = SFIELD(regval, <NAME>, 1);
- *    W_REG(osh, &regs->regfoo, regval);
- */
-#define BITFIELD_MASK(width) \
-		(((unsigned)1 << (width)) - 1)
-#define GFIELD(val, field) \
-		(((val) >> field ## _S) & field ## _M)
-#define SFIELD(val, field, bits) \
-		(((val) & (~(field ## _M << field ## _S))) | \
-		 ((unsigned)(bits) << field ## _S))
-
 /*
  * Priority definitions according 802.1D
  */
@@ -137,17 +46,12 @@ typedef struct {
 #define	PRIO_8021D_VI		5
 #define	PRIO_8021D_VO		6
 #define	PRIO_8021D_NC		7
+
 #define	MAXPRIO			7
 #define NUMPRIO			(MAXPRIO + 1)
 
-/* Max. nvram variable table size */
-#define	MAXSZ_NVRAM_VARS	4096
-
-/* handle forward declaration */
-struct wl_info;
-struct wlc_bsscfg;
-
 #define WL_NUMRATES		16	/* max # of rates in a rateset */
+
 typedef struct wl_rateset {
 	u32 count;		/* # rates in this set */
 	u8 rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
@@ -187,16 +91,8 @@ typedef struct wl_rateset {
 #define WL_ERROR_VAL		0x00000001
 #define WL_TRACE_VAL		0x00000002
 
-#define	NFIFO			6	/* # tx/rx fifopairs */
-
 #define PM_OFF	0
 #define PM_MAX	1
 #define PM_FAST 2
 
-/* band range returned by band_range iovar */
-#define WL_CHAN_FREQ_RANGE_2G      0
-#define WL_CHAN_FREQ_RANGE_5GL     1
-#define WL_CHAN_FREQ_RANGE_5GM     2
-#define WL_CHAN_FREQ_RANGE_5GH     3
-
 #endif				/* _bcmdefs_h_ */