Staging: remove agnx driver

The agnx driver in the staging tree is broken, does not work, and
development is dead.  The developers have asked for it to be removed
so it now is.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 409 deletions

diff --git a/drivers/staging/agnx/phy.h b/drivers/staging/agnx/phy.h
deleted file mode 100644
index a955f05361e7..000000000000
--- a/drivers/staging/agnx/phy.h
+++ /dev/null
@@ -1,409 +0,0 @@
-#ifndef AGNX_PHY_H_
-#define AGNX_PHY_H_
-
-#include "agnx.h"
-
-/* Transmission Managment Registers */
-#define AGNX_TXM_BASE		0x0000
-#define AGNX_TXM_CTL		0x0000	/* control register */
-#define AGNX_TXM_ETMF		0x0004 /* enable transmission management functions */
-#define AGNX_TXM_TXTEMP		0x0008 /* transmission template */
-#define AGNX_TXM_RETRYSTAID	0x000c /* Retry Station ID */
-#define AGNX_TXM_TIMESTAMPLO		0x0010	/* Timestamp Lo */
-#define AGNX_TXM_TIMESTAMPHI		0x0014	/* Timestamp Hi */
-#define AGNX_TXM_TXDELAY	0x0018  /* tx delay */
-#define AGNX_TXM_TBTTLO		0x0020	/* tbtt Lo */
-#define AGNX_TXM_TBTTHI		0x0024	/* tbtt Hi */
-#define AGNX_TXM_BEAINTER	0x0028 /* Beacon Interval */
-#define AGNX_TXM_NAV		0x0030 /* NAV */
-#define AGNX_TXM_CFPMDV		0x0034 /* CFP MDV */
-#define AGNX_TXM_CFPERCNT	0x0038 /* CFP period count */
-#define AGNX_TXM_PROBDELAY	0x003c /* probe delay */
-#define AGNX_TXM_LISINTERCNT	0x0040 /* listen interval count */
-#define AGNX_TXM_DTIMPERICNT	0x004c /* DTIM period count */
-
-#define AGNX_TXM_BEACON_CTL	0x005c /* beacon control */
-
-#define AGNX_TXM_SCHEMPCNT	0x007c /* schedule empty count */
-#define AGNX_TXM_MAXTIMOUT	0x0084 /* max timeout exceed count */
-#define AGNX_TXM_MAXCFPTIM	0x0088 /* max CF poll timeout count */
-#define AGNX_TXM_MAXRXTIME	0x008c /* max RX timeout count */
-#define AGNX_TXM_MAXACKTIM	0x0090	/* max ACK timeout count */
-#define AGNX_TXM_DIF01		0x00a0 /* DIF 0-1 */
-#define AGNX_TXM_DIF23		0x00a4 /* DIF 2-3 */
-#define AGNX_TXM_DIF45		0x00a8 /* DIF 4-5 */
-#define AGNX_TXM_DIF67		0x00ac /* DIF 6-7 */
-#define AGNX_TXM_SIFSPIFS	0x00b0 /* SIFS/PIFS */
-#define AGNX_TXM_TIFSEIFS	0x00b4 /* TIFS/EIFS */
-#define AGNX_TXM_MAXCCACNTSLOT	0x00b8 /* max CCA count slot */
-#define AGNX_TXM_SLOTLIMIT	0x00bc /* slot limit/1 msec limit */
-#define AGNX_TXM_CFPOLLRXTIM	0x00f0 /* CF poll RX timeout count */
-#define AGNX_TXM_CFACKT11B	0x00f4 /* CF ack timeout limit for 11b */
-#define AGNX_TXM_CW0		0x0100 /* CW 0 */
-#define AGNX_TXM_SLBEALIM0	0x0108 /* short/long beacon limit 0 */
-#define AGNX_TXM_CW1		0x0120 /* CW 1 */
-#define AGNX_TXM_SLBEALIM1	0x0128 /* short/long beacon limit 1 */
-#define AGNX_TXM_CW2		0x0140 /* CW 2 */
-#define AGNX_TXM_SLBEALIM2	0x0148 /* short/long beacon limit 2 */
-#define AGNX_TXM_CW3		0x0160 /* CW 3 */
-#define AGNX_TXM_SLBEALIM3	0x0168 /* short/long beacon limit 3 */
-#define AGNX_TXM_CW4		0x0180 /* CW 4 */
-#define AGNX_TXM_SLBEALIM4	0x0188 /* short/long beacon limit 4 */
-#define AGNX_TXM_CW5		0x01a0 /* CW 5 */
-#define AGNX_TXM_SLBEALIM5	0x01a8 /* short/long beacon limit 5 */
-#define AGNX_TXM_CW6		0x01c0 /* CW 6 */
-#define AGNX_TXM_SLBEALIM6	0x01c8 /* short/long beacon limit 6 */
-#define AGNX_TXM_CW7		0x01e0 /* CW 7 */
-#define AGNX_TXM_SLBEALIM7	0x01e8 /* short/long beacon limit 7 */
-#define AGNX_TXM_BEACONTEMP     0x1000	/* beacon template */
-#define AGNX_TXM_STAPOWTEMP	0x1a00 /*  Station Power Template */
-
-/* Receive Management Control Registers */
-#define AGNX_RXM_BASE		0x2000
-#define AGNX_RXM_REQRATE	0x2000	/* requested rate */
-#define AGNX_RXM_MACHI		0x2004	/* first 4 bytes of mac address */
-#define AGNX_RXM_MACLO		0x2008	/* last 2 bytes of mac address */
-#define AGNX_RXM_BSSIDHI	0x200c	/* bssid hi */
-#define AGNX_RXM_BSSIDLO	0x2010	/* bssid lo */
-#define AGNX_RXM_HASH_CMD_FLAG	0x2014	/* Flags for the RX Hash Command Default:0 */
-#define AGNX_RXM_HASH_CMD_HIGH	0x2018	/* The High half of the Hash Command */
-#define AGNX_RXM_HASH_CMD_LOW	0x201c	/* The Low half of the Hash Command */
-#define AGNX_RXM_ROUTAB		0x2020	/* routing table */
-#define		ROUTAB_SUBTYPE_SHIFT	24
-#define		ROUTAB_TYPE_SHIFT	28
-#define		ROUTAB_STATUS_SHIFT	30
-#define		ROUTAB_RW_SHIFT		31
-#define		ROUTAB_ROUTE_DROP	0xf00000 /* Drop */
-#define		ROUTAB_ROUTE_CPU	0x400000 /* CPU */
-#define		ROUTAB_ROUTE_ENCRY	0x500800 /* Encryption */
-#define		ROUTAB_ROUTE_RFP	0x800000 /* RFP */
-
-#define		ROUTAB_TYPE_MANAG	0x0 /* Management */
-#define		ROUTAB_TYPE_CTL		0x1 /* Control */
-#define		ROUTAB_TYPE_DATA	0x2 /* Data */
-
-#define		ROUTAB_SUBTYPE_DATA		0x0
-#define		ROUTAB_SUBTYPE_DATAACK		0x1
-#define		ROUTAB_SUBTYPE_DATAPOLL		0x2
-#define		ROUTAB_SUBTYPE_DATAPOLLACK	0x3
-#define		ROUTAB_SUBTYPE_NULL		0x4 /* NULL */
-#define		ROUTAB_SUBTYPE_NULLACK		0x5
-#define		ROUTAB_SUBTYPE_NULLPOLL		0x6
-#define		ROUTAB_SUBTYPE_NULLPOLLACK	0x7
-#define		ROUTAB_SUBTYPE_QOSDATA		0x8 /* QOS DATA */
-#define		ROUTAB_SUBTYPE_QOSDATAACK	0x9
-#define		ROUTAB_SUBTYPE_QOSDATAPOLL	0xa
-#define		ROUTAB_SUBTYPE_QOSDATAACKPOLL	0xb
-#define		ROUTAB_SUBTYPE_QOSNULL		0xc
-#define		ROUTAB_SUBTYPE_QOSNULLACK	0xd
-#define		ROUTAB_SUBTYPE_QOSNULLPOLL	0xe
-#define		ROUTAB_SUBTYPE_QOSNULLPOLLACK	0xf
-#define AGNX_RXM_DELAY11	   0x2024	/* delay 11(AB) */
-#define AGNX_RXM_SOF_CNT	   0x2028	/* SOF Count */
-#define AGNX_RXM_FRAG_CNT	   0x202c	/* Fragment Count*/
-#define AGNX_RXM_FCS_CNT	   0x2030	/* FCS Count */
-#define AGNX_RXM_BSSID_MISS_CNT	   0x2034	/* BSSID Miss Count */
-#define AGNX_RXM_PDU_ERR_CNT	   0x2038	/* PDU Error Count */
-#define AGNX_RXM_DEST_MISS_CNT	   0x203C	/* Destination Miss Count */
-#define AGNX_RXM_DROP_CNT	   0x2040	/* Drop Count */
-#define AGNX_RXM_ABORT_CNT	   0x2044	/* Abort Count */
-#define AGNX_RXM_RELAY_CNT	   0x2048	/* Relay Count */
-#define AGNX_RXM_HASH_MISS_CNT	   0x204c	/* Hash Miss Count */
-#define AGNX_RXM_SA_HI		   0x2050	/* Address of received packet Hi */
-#define AGNX_RXM_SA_LO		   0x2054	/* Address of received packet Lo */
-#define AGNX_RXM_HASH_DUMP_LST	   0x2100	/* Contains Hash Data */
-#define AGNX_RXM_HASH_DUMP_MST	   0x2104	/* Contains Hash Data */
-#define AGNX_RXM_HASH_DUMP_DATA    0x2108	/* The Station ID to dump */
-
-
-/* Encryption Managment */
-#define AGNX_ENCRY_BASE		0x2400
-#define AGNX_ENCRY_WEPKEY0	0x2440 /* wep key #0 */
-#define AGNX_ENCRY_WEPKEY1	0x2444 /* wep key #1 */
-#define AGNX_ENCRY_WEPKEY2	0x2448 /* wep key #2 */
-#define AGNX_ENCRY_WEPKEY3	0x244c /* wep key #3 */
-#define AGNX_ENCRY_CCMRECTL	0x2460 /* ccm replay control */
-
-
-/* Band Management Registers */
-#define AGNX_BM_BASE		0x2c00
-#define AGNX_BM_BMCTL		0x2c00  /* band management control */
-#define AGNX_BM_TXWADDR		0x2c18  /* tx workqueue address start */
-#define AGNX_BM_TXTOPEER	0x2c24	/* transmit to peers */
-#define AGNX_BM_FPLHP		0x2c2c  /* free pool list head pointer */
-#define AGNX_BM_FPLTP		0x2c30  /* free pool list tail pointer */
-#define AGNX_BM_FPCNT		0x2c34  /* free pool count */
-#define AGNX_BM_CIPDUWCNT	0x2c38  /* card interface pdu workqueue count */
-#define AGNX_BM_SPPDUWCNT	0x2c3c  /* sp pdu workqueue count */
-#define AGNX_BM_RFPPDUWCNT	0x2c40  /* rfp pdu workqueue count */
-#define AGNX_BM_RHPPDUWCNT	0x2c44  /* rhp pdu workqueue count */
-#define AGNX_BM_CIWQCTL		0x2c48 /* Card Interface WorkQueue Control */
-#define AGNX_BM_CPUTXWCTL	0x2c50  /* cpu tx workqueue control */
-#define AGNX_BM_CPURXWCTL	0x2c58  /* cpu rx workqueue control */
-#define AGNX_BM_CPULWCTL	0x2c60 /* cpu low workqueue control */
-#define AGNX_BM_CPUHWCTL	0x2c68 /* cpu high workqueue control */
-#define AGNX_BM_SPTXWCTL	0x2c70 /* sp tx workqueue control */
-#define AGNX_BM_SPRXWCTL	0x2c78 /* sp rx workqueue control */
-#define AGNX_BM_RFPWCTL		0x2c80 /* RFP workqueue control */
-#define AGNX_BM_MTSM		0x2c90 /* Multicast Transmit Station Mask */
-
-/* Card Interface Registers (32bits) */
-#define AGNX_CIR_BASE		0x3000
-#define AGNX_CIR_BLKCTL		0x3000	/* block control*/
-#define		AGNX_STAT_TX	0x1
-#define		AGNX_STAT_RX	0x2
-#define		AGNX_STAT_X	0x4
-/* Below two interrupt flags will be set by our but not CPU or the card */
-#define		AGNX_STAT_TXD	0x10
-#define		AGNX_STAT_TXM	0x20
-
-#define AGNX_CIR_ADDRWIN	0x3004	/* Addressable Windows*/
-#define AGNX_CIR_ENDIAN		0x3008  /* card endianness */
-#define AGNX_CIR_SERIALITF	0x3020	/* serial interface */
-#define AGNX_CIR_RXCFG		0x3040	/* receive config */
-#define		ENABLE_RX_INTERRUPT 0x20
-#define		RX_CACHE_LINE	    0x8
-/* the RX fragment length */
-#define		FRAG_LEN_256	0x0 /* 256B */
-#define		FRAG_LEN_512	0x1
-#define		FRAG_LEN_1024	0x2
-#define		FRAG_LEN_2048	0x3
-#define		FRAG_BE		0x10
-#define AGNX_CIR_RXCTL		0x3050	/* receive control */
-/* memory address, chipside */
-#define AGNX_CIR_RXCMSTART	0x3054	/* receive client memory start */
-#define AGNX_CIR_RXCMEND	0x3058	/* receive client memory end */
-/* memory address, pci */
-#define AGNX_CIR_RXHOSTADDR	0x3060	/* receive hostside address */
-/* memory address, chipside */
-#define AGNX_CIR_RXCLIADDR	0x3064	/* receive clientside address */
-#define AGNX_CIR_RXDMACTL	0x3068	/* receive dma control */
-#define AGNX_CIR_TXCFG		0x3080	/* transmit config */
-#define AGNX_CIR_TXMCTL		0x3090 /* Transmit Management Control */
-#define		ENABLE_TX_INTERRUPT 0x20
-#define		TX_CACHE_LINE	    0x8
-#define AGNX_CIR_TXMSTART	0x3094 /* Transmit Management Start */
-#define AGNX_CIR_TXMEND		0x3098 /* Transmit Management End */
-#define AGNX_CIR_TXDCTL		0x30a0	/* transmit data control */
-/* memeory address, chipset */
-#define AGNX_CIR_TXDSTART	0x30a4	/* transmit data start */
-#define AGNX_CIR_TXDEND		0x30a8	/* transmit data end */
-#define AGNX_CIR_TXMHADDR	0x30b0 /* Transmit Management Hostside Address */
-#define AGNX_CIR_TXMCADDR	0x30b4 /* Transmit Management Clientside Address */
-#define AGNX_CIR_TXDMACTL	0x30b8	/* transmit dma control */
-
-
-/* Power Managment Unit */
-#define AGNX_PM_BASE		0x3c00
-#define AGNX_PM_PMCTL		0x3c00	/* PM Control*/
-#define AGNX_PM_MACMSW		0x3c08 /* MAC Manual Slow Work Enable */
-#define AGNX_PM_RFCTL		0x3c0c /* RF Control */
-#define AGNX_PM_PHYMW		0x3c14	/* Phy Mannal Work */
-#define AGNX_PM_SOFTRST		0x3c18	/* PMU Soft Reset */
-#define AGNX_PM_PLLCTL		0x3c1c	/* PMU PLL control*/
-#define AGNX_PM_TESTPHY		0x3c24 /* PMU Test Phy */
-
-
-/* Interrupt Control interface */
-#define AGNX_INT_BASE		0x4000
-#define AGNX_INT_STAT		0x4000	/* interrupt status */
-#define AGNX_INT_MASK		0x400c	/* interrupt mask */
-/* FIXME */
-#define		IRQ_TX_BEACON	0x1	/* TX Beacon */
-#define		IRQ_TX_RETRY	0x8	/* TX Retry Interrupt */
-#define		IRQ_TX_ACTIVITY	0x10	/* TX Activity */
-#define		IRQ_RX_ACTIVITY	0x20	/* RX Activity */
-/* FIXME I guess that instead RX a none exist staion's packet or
-   the station hasn't been init */
-#define		IRQ_RX_X	0x40
-#define		IRQ_RX_Y	0x80	/* RX ? */
-#define		IRQ_RX_HASHHIT	0x100	/* RX Hash Hit */
-#define		IRQ_RX_FRAME	0x200	/* RX Frame */
-#define		IRQ_ERR_INT	0x400	/* Error Interrupt */
-#define		IRQ_TX_QUE_FULL	0x800	/* TX Workqueue Full */
-#define		IRQ_BANDMAN_ERR	0x10000	/* Bandwidth Management Error */
-#define		IRQ_TX_DISABLE	0x20000	/* TX Disable */
-#define		IRQ_RX_IVASESKEY 0x80000 /* RX Invalid Session Key */
-#define		IRQ_RX_KEYIDMIS	0x100000 /* RX key ID Mismatch */
-#define		IRQ_REP_THHIT	0x200000 /* Replay Threshold Hit */
-#define		IRQ_TIMER1	0x4000000 /* Timer1 */
-#define		IRQ_TIMER_CNT	0x10000000 /* Timer Count */
-#define		IRQ_PHY_FASTINT 0x20000000 /* Phy Fast Interrupt */
-#define		IRQ_PHY_SLOWINT	0x40000000 /* Phy Slow Interrupt */
-#define		IRQ_OTHER	0x80000000 /* Unknow interrupt */
-#define		AGNX_IRQ_ALL   	0xffffffff
-
-/* System Interface */
-#define AGNX_SYSITF_BASE	0x4400
-#define AGNX_SYSITF_SYSMODE	0x4400	/* system mode */
-#define AGNX_SYSITF_GPIOIN	0x4410 /* GPIO In */
-/* PIN lines for leds? */
-#define AGNX_SYSITF_GPIOUT	0x4414	/* GPIO Out */
-
-/* Timer Control */
-#define AGNX_TIMCTL_TIMER1	0x4800 /* Timer 1 */
-#define AGNX_TIMCTL_TIM1CTL	0x4808 /* Timer 1 Control */
-
-
-/* Antenna Calibration Interface */
-#define AGNX_ACI_BASE		0x5000
-#define AGNX_ACI_MODE		0x5000 /* Mode */
-#define AGNX_ACI_MEASURE	0x5004 /* Measure */
-#define AGNX_ACI_SELCHAIN	0x5008 /* Select Chain */
-#define AGNX_ACI_LEN		0x500c /* Length */
-#define AGNX_ACI_TIMER1		0x5018 /* Timer 1 */
-#define AGNX_ACI_TIMER2		0x501c /* Timer 2 */
-#define AGNX_ACI_OFFSET		0x5020 /* Offset */
-#define AGNX_ACI_STATUS		0x5030 /* Status */
-#define		CALI_IDLE	0x0
-#define		CALI_DONE	0x1
-#define		CALI_BUSY	0x2
-#define		CALI_ERR	0x3
-#define AGNX_ACI_AICCHA0OVE	0x5034 /* AIC Channel 0 Override */
-#define AGNX_ACI_AICCHA1OVE	0x5038 /* AIC Channel 1 Override */
-
-/* Gain Control Registers */
-#define AGNX_GCR_BASE		0x9000
-/* threshold of primary antenna */
-#define AGNX_GCR_THD0A		0x9000	/* threshold? D0 A */
-/* low threshold of primary antenna */
-#define AGNX_GCR_THD0AL		0x9004	/* threshold? D0 A low */
-/* threshold of secondary antenna */
-#define AGNX_GCR_THD0B		0x9008	/* threshold? D0_B */
-#define AGNX_GCR_DUNSAT		0x900c /* d unsaturated */
-#define AGNX_GCR_DSAT		0x9010 /* d saturated */
-#define AGNX_GCR_DFIRCAL	0x9014 /* D Fir/Cal */
-#define AGNX_GCR_DGCTL11A	0x9018 /* d gain control 11a */
-#define AGNX_GCR_DGCTL11B	0x901c /* d gain control 11b */
-/* strength of gain */
-#define AGNX_GCR_GAININIT	0x9020	/* gain initialization */
-#define AGNX_GCR_THNOSIG	0x9024 /* threhold no signal */
-#define AGNX_GCR_COARSTEP	0x9028 /* coarse stepping */
-#define AGNX_GCR_SIFST11A	0x902c /* sifx time 11a */
-#define AGNX_GCR_SIFST11B	0x9030 /* sifx time 11b */
-#define AGNX_GCR_CWDETEC	0x9034 /* cw detection */
-#define AGNX_GCR_0X38		0x9038 /* ???? */
-#define AGNX_GCR_BOACT		0x903c	/* BO Active */
-#define AGNX_GCR_BOINACT	0x9040	/* BO Inactive */
-#define AGNX_GCR_BODYNA		0x9044	/* BO dynamic */
-/* 802.11 mode(a,b,g) */
-#define AGNX_GCR_DISCOVMOD	0x9048	/* discovery mode */
-#define AGNX_GCR_NLISTANT	0x904c	/* number of listening antenna */
-#define AGNX_GCR_NACTIANT	0x9050	/* number of active antenna */
-#define AGNX_GCR_NMEASANT	0x9054	/* number of measuring antenna */
-#define AGNX_GCR_NCAPTANT	0x9058	/* number of capture antenna */
-#define AGNX_GCR_THCAP11A	0x905c /* threshold capture 11a */
-#define AGNX_GCR_THCAP11B	0x9060 /* threshold capture 11b */
-#define AGNX_GCR_THCAPRX11A	0x9064 /* threshold capture rx 11a */
-#define AGNX_GCR_THCAPRX11B	0x9068 /* threshold capture rx 11b */
-#define AGNX_GCR_THLEVDRO	0x906c /* threshold level drop */
-#define AGNX_GCR_GAINSET0	0x9070 /* Gainset 0 */
-#define AGNX_GCR_GAINSET1	0x9074 /* Gainset 1 */
-#define AGNX_GCR_GAINSET2	0x9078 /* Gainset 2 */
-#define AGNX_GCR_MAXRXTIME11A	0x907c /* maximum rx time 11a */
-#define AGNX_GCR_MAXRXTIME11B	0x9080 /* maximum rx time 11b */
-#define AGNX_GCR_CORRTIME	0x9084 /* correction time */
-/* reset the subsystem, 0 = disable, 1 = enable */
-#define AGNX_GCR_RSTGCTL	0x9088	/* reset gain control */
-/* channel receiving */
-#define AGNX_GCR_RXCHANEL	0x908c	/* receive channel */
-#define AGNX_GCR_NOISE0		0x9090 /* Noise 0 */
-#define AGNX_GCR_NOISE1		0x9094 /* Noise 1 */
-#define AGNX_GCR_NOISE2		0x9098 /* Noise 2 */
-#define AGNX_GCR_SIGHTH		0x909c	/* Signal High Threshold */
-#define AGNX_GCR_SIGLTH		0x90a0	/* Signal Low Threshold */
-#define AGNX_GCR_CORRDROP	0x90a4 /* correction drop */
-/* threshold of tertiay antenna */
-#define AGNX_GCR_THCD		0x90a8	/* threshold? CD */
-#define AGNX_GCR_THCS		0x90ac	/* threshold? CS */
-#define AGNX_GCR_MAXPOWDIFF	0x90b8 /* maximum power difference */
-#define AGNX_GCR_TRACNT4	0x90ec /* Transition Count 4 */
-#define AGNX_GCR_TRACNT5      	0x90f0	/* transition count 5 */
-#define AGNX_GCR_TRACNT6       	0x90f4	/* transition count 6 */
-#define AGNX_GCR_TRACNT7       	0x90f8	/* transition coutn 7 */
-#define AGNX_GCR_TESTBUS	0x911c /* test bus */
-#define AGNX_GCR_CHAINNUM	0x9120 /* Number of Chains */
-#define AGNX_GCR_ANTCFG		0x9124	/* Antenna Config */
-#define AGNX_GCR_THJUMP		0x912c /* threhold jump */
-#define AGNX_GCR_THPOWER	0x9130 /* threshold power */
-#define AGNX_GCR_THPOWCLIP	0x9134 /* threshold power clip*/
-#define AGNX_GCR_FORCECTLCLK	0x9138 /* Force Gain Control Clock */
-#define AGNX_GCR_GAINSETWRITE	0x913c /* Gainset Write */
-#define AGNX_GCR_THD0BTFEST	0x9140	/* threshold d0 b tf estimate */
-#define AGNX_GCR_THRX11BPOWMIN	0x9144	/* threshold rx 11b power minimum */
-#define AGNX_GCR_0X14c		0x914c /* ?? */
-#define AGNX_GCR_0X150		0x9150 /* ?? */
-#define AGNX_GCR_RXOVERIDE	0x9194	/* recieve override */
-#define AGNX_GCR_WATCHDOG	0x91b0	/* watchdog timeout */
-
-
-/* Spi Interface */
-#define AGNX_SPI_BASE		0xdc00
-#define AGNX_SPI_CFG		0xdc00 /* spi configuration */
-/* Only accept 16 bits */
-#define AGNX_SPI_WMSW		0xdc04	/* write most significant word */
-/* Only accept 16 bits */
-#define AGNX_SPI_WLSW		0xdc08	/* write least significant word */
-#define AGNX_SPI_CTL		0xdc0c	/* spi control */
-#define AGNX_SPI_RMSW		0xdc10 /* read most significant word */
-#define AGNX_SPI_RLSW		0xdc14 /* read least significant word */
-/* SPI Control Mask */
-#define		SPI_READ_CTL		0x4000 /* read control */
-#define		SPI_BUSY_CTL		0x8000 /* busy control */
-/* RF and synth chips in spi */
-#define		RF_CHIP0	0x400
-#define		RF_CHIP1	0x800
-#define		RF_CHIP2	0x1000
-#define		SYNTH_CHIP	0x2000
-
-/* Unknown register */
-#define AGNX_UNKNOWN_BASE	0x7800
-
-/* FIXME MonitorGain */
-#define AGNX_MONGCR_BASE	0x12000
-
-/* Gain Table */
-#define AGNX_GAIN_TABLE		0x12400
-
-/* The initial FIR coefficient table */
-#define AGNX_FIR_BASE		0x19804
-
-#define AGNX_ENGINE_LOOKUP_TBL	0x800
-
-/* eeprom commands */
-#define EEPROM_CMD_NULL		0x0 /* NULL */
-#define EEPROM_CMD_WRITE	0x2 /* write */
-#define EEPROM_CMD_READ		0x3 /* read */
-#define EEPROM_CMD_STATUSREAD	0x5 /* status register read */
-#define EEPROM_CMD_WRITEENABLE	0x6 /* write enable */
-#define EEPROM_CMD_CONFIGURE	0x7 /* configure */
-
-#define EEPROM_DATAFORCOFIGURE	0x6 /* ??? */
-
-/* eeprom address */
-#define EEPROM_ADDR_SUBVID	0x0 /* Sub Vendor ID */
-#define EEPROM_ADDR_SUBSID	0x2 /* Sub System ID */
-#define EEPROM_ADDR_MACADDR	0x146 /* MAC Address */
-#define EEPROM_ADDR_LOTYPE	0x14f /* LO type */
-
-struct agnx_eeprom {
-	u8 data;	/* date */
-	u16 address;	/* address in EEPROM */
-	u8 cmd;		/* command, unknown, status */
-}  __attribute__((__packed__));
-
-#define AGNX_EEPROM_COMMAND_SHIFT	5
-#define AGNX_EEPROM_COMMAND_STAT	0x01
-
-void disable_receiver(struct agnx_priv *priv);
-void enable_receiver(struct agnx_priv *priv);
-u8 read_from_eeprom(struct agnx_priv *priv, u16 address);
-void agnx_hw_init(struct agnx_priv *priv);
-int agnx_hw_reset(struct agnx_priv *priv);
-int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len);
-void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid);
-void enable_power_saving(struct agnx_priv *priv);
-void disable_power_saving(struct agnx_priv *priv);
-void calibrate_antenna_period(unsigned long data);
-
-#endif /* AGNX_PHY_H_ */