diff options
| author | Gregory CLEMENT <gregory.clement@bootlin.com> | 2019-10-18 17:29:29 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2019-10-18 18:23:43 +0100 |
| commit | 3e5ec1db8bfee845d9f8560d1c64aeaccd586398 (patch) | |
| tree | fc9119f21fe58116693061ad364eb7985eb3e639 /drivers/spi | |
| parent | b2662a164f9dc48da8822e56600686d639056282 (diff) | |
spi: Fix SPI_CS_HIGH setting when using native and GPIO CS
When improving the CS GPIO support at core level, the SPI_CS_HIGH
has been enabled for all the CS lines used for a given SPI controller.
However, the SPI framework allows to have on the same controller native
CS and GPIO CS. The native CS may not support the SPI_CS_HIGH, so they
should not be setup automatically.
With this patch the setting is done only for the CS that will use a
GPIO as CS
Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191018152929.3287-1-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index f8b4654a57d3..d07517151340 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1711,15 +1711,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, spi->mode |= SPI_3WIRE; if (of_property_read_bool(nc, "spi-lsb-first")) spi->mode |= SPI_LSB_FIRST; - - /* - * For descriptors associated with the device, polarity inversion is - * handled in the gpiolib, so all chip selects are "active high" in - * the logical sense, the gpiolib will invert the line if need be. - */ - if (ctlr->use_gpio_descriptors) - spi->mode |= SPI_CS_HIGH; - else if (of_property_read_bool(nc, "spi-cs-high")) + if (of_property_read_bool(nc, "spi-cs-high")) spi->mode |= SPI_CS_HIGH; /* Device DUAL/QUAD mode */ @@ -1783,6 +1775,14 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, } spi->chip_select = value; + /* + * For descriptors associated with the device, polarity inversion is + * handled in the gpiolib, so all gpio chip selects are "active high" + * in the logical sense, the gpiolib will invert the line if need be. + */ + if ((ctlr->use_gpio_descriptors) && ctlr->cs_gpiods[spi->chip_select]) + spi->mode |= SPI_CS_HIGH; + /* Device speed */ rc = of_property_read_u32(nc, "spi-max-frequency", &value); if (rc) { |