diff options
author | Mark Brown <broonie@kernel.org> | 2021-06-01 18:33:33 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2021-06-01 18:33:33 +0100 |
commit | 1a435466b0d470eb9095da0efefea5f7f69acf9c (patch) | |
tree | a661a705f8236cf7bd86ff250de2f627c9f0a333 /drivers/spi | |
parent | 5cb4e1f33e5eeadbce3814282e010d4dd31816af (diff) | |
parent | 2ec6f20b33eb4f62ab90bdcd620436c883ec3af6 (diff) |
Merge branch 'for-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.14
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/spi-bcm2835.c | 10 | ||||
-rw-r--r-- | drivers/spi/spi-bitbang.c | 18 | ||||
-rw-r--r-- | drivers/spi/spi-fsl-dspi.c | 4 | ||||
-rw-r--r-- | drivers/spi/spi-fsl-spi.c | 4 | ||||
-rw-r--r-- | drivers/spi/spi-omap-uwire.c | 9 | ||||
-rw-r--r-- | drivers/spi/spi-omap2-mcspi.c | 33 | ||||
-rw-r--r-- | drivers/spi/spi-pxa2xx.c | 7 | ||||
-rw-r--r-- | drivers/spi/spi-sc18is602.c | 9 | ||||
-rw-r--r-- | drivers/spi/spi-sprd.c | 1 | ||||
-rw-r--r-- | drivers/spi/spi.c | 37 |
10 files changed, 100 insertions, 32 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 8965fe61c8b4..fe40626e45aa 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -68,7 +68,7 @@ #define BCM2835_SPI_FIFO_SIZE 64 #define BCM2835_SPI_FIFO_SIZE_3_4 48 #define BCM2835_SPI_DMA_MIN_LENGTH 96 -#define BCM2835_SPI_NUM_CS 4 /* raise as necessary */ +#define BCM2835_SPI_NUM_CS 24 /* raise as necessary */ #define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ | SPI_NO_CS | SPI_3WIRE) @@ -1195,6 +1195,12 @@ static int bcm2835_spi_setup(struct spi_device *spi) struct gpio_chip *chip; u32 cs; + if (spi->chip_select >= BCM2835_SPI_NUM_CS) { + dev_err(&spi->dev, "only %d chip-selects supported\n", + BCM2835_SPI_NUM_CS - 1); + return -EINVAL; + } + /* * Precalculate SPI slave's CS register value for ->prepare_message(): * The driver always uses software-controlled GPIO chip select, hence @@ -1288,7 +1294,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) ctlr->use_gpio_descriptors = true; ctlr->mode_bits = BCM2835_SPI_MODE_BITS; ctlr->bits_per_word_mask = SPI_BPW_MASK(8); - ctlr->num_chipselect = BCM2835_SPI_NUM_CS; + ctlr->num_chipselect = 3; ctlr->setup = bcm2835_spi_setup; ctlr->transfer_one = bcm2835_spi_transfer_one; ctlr->handle_err = bcm2835_spi_handle_err; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 6a6af85aebfd..27d0087f8688 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -184,6 +184,8 @@ int spi_bitbang_setup(struct spi_device *spi) { struct spi_bitbang_cs *cs = spi->controller_state; struct spi_bitbang *bitbang; + bool initial_setup = false; + int retval; bitbang = spi_master_get_devdata(spi->master); @@ -192,22 +194,30 @@ int spi_bitbang_setup(struct spi_device *spi) if (!cs) return -ENOMEM; spi->controller_state = cs; + initial_setup = true; } /* per-word shift register access, in hardware or bitbanging */ cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; - if (!cs->txrx_word) - return -EINVAL; + if (!cs->txrx_word) { + retval = -EINVAL; + goto err_free; + } if (bitbang->setup_transfer) { - int retval = bitbang->setup_transfer(spi, NULL); + retval = bitbang->setup_transfer(spi, NULL); if (retval < 0) - return retval; + goto err_free; } dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); return 0; + +err_free: + if (initial_setup) + kfree(cs); + return retval; } EXPORT_SYMBOL_GPL(spi_bitbang_setup); diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 028736687488..fb45e6af6638 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1375,11 +1375,13 @@ poll_mode: ret = spi_register_controller(ctlr); if (ret != 0) { dev_err(&pdev->dev, "Problem registering DSPI ctlr\n"); - goto out_free_irq; + goto out_release_dma; } return ret; +out_release_dma: + dspi_release_dma(dspi); out_free_irq: if (dspi->irq) free_irq(dspi->irq, dspi); diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index d0e5aa18b7ba..bdf94cc7be1a 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -440,6 +440,7 @@ static int fsl_spi_setup(struct spi_device *spi) { struct mpc8xxx_spi *mpc8xxx_spi; struct fsl_spi_reg __iomem *reg_base; + bool initial_setup = false; int retval; u32 hw_mode; struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi); @@ -452,6 +453,7 @@ static int fsl_spi_setup(struct spi_device *spi) if (!cs) return -ENOMEM; spi_set_ctldata(spi, cs); + initial_setup = true; } mpc8xxx_spi = spi_master_get_devdata(spi->master); @@ -475,6 +477,8 @@ static int fsl_spi_setup(struct spi_device *spi) retval = fsl_spi_setup_transfer(spi, NULL); if (retval < 0) { cs->hw_mode = hw_mode; /* Restore settings */ + if (initial_setup) + kfree(cs); return retval; } diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index c975e8640560..087172a193fa 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -424,15 +424,22 @@ done: static int uwire_setup(struct spi_device *spi) { struct uwire_state *ust = spi->controller_state; + bool initial_setup = false; + int status; if (ust == NULL) { ust = kzalloc(sizeof(*ust), GFP_KERNEL); if (ust == NULL) return -ENOMEM; spi->controller_state = ust; + initial_setup = true; } - return uwire_setup_transfer(spi, NULL); + status = uwire_setup_transfer(spi, NULL); + if (status && initial_setup) + kfree(ust); + + return status; } static void uwire_cleanup(struct spi_device *spi) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index d0372406b5da..60c9cdf1c94b 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1032,8 +1032,22 @@ static void omap2_mcspi_release_dma(struct spi_master *master) } } +static void omap2_mcspi_cleanup(struct spi_device *spi) +{ + struct omap2_mcspi_cs *cs; + + if (spi->controller_state) { + /* Unlink controller state from context save list */ + cs = spi->controller_state; + list_del(&cs->node); + + kfree(cs); + } +} + static int omap2_mcspi_setup(struct spi_device *spi) { + bool initial_setup = false; int ret; struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master); struct omap2_mcspi_regs *ctx = &mcspi->ctx; @@ -1051,35 +1065,28 @@ static int omap2_mcspi_setup(struct spi_device *spi) spi->controller_state = cs; /* Link this to context save list */ list_add_tail(&cs->node, &ctx->cs); + initial_setup = true; } ret = pm_runtime_get_sync(mcspi->dev); if (ret < 0) { pm_runtime_put_noidle(mcspi->dev); + if (initial_setup) + omap2_mcspi_cleanup(spi); return ret; } ret = omap2_mcspi_setup_transfer(spi, NULL); + if (ret && initial_setup) + omap2_mcspi_cleanup(spi); + pm_runtime_mark_last_busy(mcspi->dev); pm_runtime_put_autosuspend(mcspi->dev); return ret; } -static void omap2_mcspi_cleanup(struct spi_device *spi) -{ - struct omap2_mcspi_cs *cs; - - if (spi->controller_state) { - /* Unlink controller state from context save list */ - cs = spi->controller_state; - list_del(&cs->node); - - kfree(cs); - } -} - static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data) { struct omap2_mcspi *mcspi = data; diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index bdf9a283efc3..974e30744b83 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1250,6 +1250,7 @@ static int setup(struct spi_device *spi) struct driver_data *drv_data = spi_controller_get_devdata(spi->controller); uint tx_thres, tx_hi_thres, rx_thres; + int err; switch (drv_data->ssp_type) { case QUARK_X1000_SSP: @@ -1410,7 +1411,11 @@ static int setup(struct spi_device *spi) if (drv_data->ssp_type == CE4100_SSP) return 0; - return setup_cs(spi, chip, chip_info); + err = setup_cs(spi, chip, chip_info); + if (err) + kfree(chip); + + return err; } static void cleanup(struct spi_device *spi) diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c index 297c512069a5..5d27ee482237 100644 --- a/drivers/spi/spi-sc18is602.c +++ b/drivers/spi/spi-sc18is602.c @@ -174,7 +174,7 @@ static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode) static int sc18is602_check_transfer(struct spi_device *spi, struct spi_transfer *t, int tlen) { - if (t && t->len + tlen > SC18IS602_BUFSIZ) + if (t && t->len + tlen > SC18IS602_BUFSIZ + 1) return -EINVAL; return 0; @@ -219,6 +219,11 @@ static int sc18is602_transfer_one(struct spi_master *master, return status; } +static size_t sc18is602_max_transfer_size(struct spi_device *spi) +{ + return SC18IS602_BUFSIZ; +} + static int sc18is602_setup(struct spi_device *spi) { struct sc18is602 *hw = spi_master_get_devdata(spi->master); @@ -293,6 +298,8 @@ static int sc18is602_probe(struct i2c_client *client, master->bits_per_word_mask = SPI_BPW_MASK(8); master->setup = sc18is602_setup; master->transfer_one_message = sc18is602_transfer_one; + master->max_transfer_size = sc18is602_max_transfer_size; + master->max_message_size = sc18is602_max_transfer_size; master->dev.of_node = np; master->min_speed_hz = hw->freq / 128; master->max_speed_hz = hw->freq / 4; diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c index b41a75749b49..28e70db9bbba 100644 --- a/drivers/spi/spi-sprd.c +++ b/drivers/spi/spi-sprd.c @@ -1068,6 +1068,7 @@ static const struct of_device_id sprd_spi_of_match[] = { { .compatible = "sprd,sc9860-spi", }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, sprd_spi_of_match); static struct platform_driver sprd_spi_driver = { .driver = { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 20932752a7ef..ac892cc83171 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -714,8 +714,6 @@ void spi_unregister_device(struct spi_device *spi) if (!spi) return; - spi_cleanup(spi); - if (spi->dev.of_node) { of_node_clear_flag(spi->dev.of_node, OF_POPULATED); of_node_put(spi->dev.of_node); @@ -723,7 +721,9 @@ void spi_unregister_device(struct spi_device *spi) if (ACPI_COMPANION(&spi->dev)) acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev)); device_remove_software_node(&spi->dev); - device_unregister(&spi->dev); + device_del(&spi->dev); + spi_cleanup(spi); + put_device(&spi->dev); } EXPORT_SYMBOL_GPL(spi_unregister_device); @@ -822,15 +822,29 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio)) { if (!(spi->mode & SPI_NO_CS)) { - if (spi->cs_gpiod) - /* polarity handled by gpiolib */ - gpiod_set_value_cansleep(spi->cs_gpiod, activate); - else + if (spi->cs_gpiod) { + /* + * Historically ACPI has no means of the GPIO polarity and + * thus the SPISerialBus() resource defines it on the per-chip + * basis. In order to avoid a chain of negations, the GPIO + * polarity is considered being Active High. Even for the cases + * when _DSD() is involved (in the updated versions of ACPI) + * the GPIO CS polarity must be defined Active High to avoid + * ambiguity. That's why we use enable, that takes SPI_CS_HIGH + * into account. + */ + if (has_acpi_companion(&spi->dev)) + gpiod_set_value_cansleep(spi->cs_gpiod, !enable); + else + /* Polarity handled by GPIO library */ + gpiod_set_value_cansleep(spi->cs_gpiod, activate); + } else { /* * invert the enable line, as active low is * default for SPI. */ gpio_set_value_cansleep(spi->cs_gpio, !enable); + } } /* Some SPI masters need both GPIO CS & slave_select */ if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && @@ -3476,9 +3490,12 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup, if (spi->controller->set_cs_timing && !(spi->cs_gpiod || gpio_is_valid(spi->cs_gpio))) { + mutex_lock(&spi->controller->io_mutex); + if (spi->controller->auto_runtime_pm) { status = pm_runtime_get_sync(parent); if (status < 0) { + mutex_unlock(&spi->controller->io_mutex); pm_runtime_put_noidle(parent); dev_err(&spi->controller->dev, "Failed to power device: %d\n", status); @@ -3489,11 +3506,13 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup, hold, inactive); pm_runtime_mark_last_busy(parent); pm_runtime_put_autosuspend(parent); - return status; } else { - return spi->controller->set_cs_timing(spi, setup, hold, + status = spi->controller->set_cs_timing(spi, setup, hold, inactive); } + + mutex_unlock(&spi->controller->io_mutex); + return status; } if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) || |