diff options
| author | Ian Munsie <imunsie@au1.ibm.com> | 2010-10-01 17:06:07 +1000 |
|---|---|---|
| committer | Grant Likely <grant.likely@secretlab.ca> | 2010-10-07 17:21:15 -0600 |
| commit | f14362d1fe81cece6f1d78483e5bbfcf8cc497bf (patch) | |
| tree | f7acfafcc2560c111783ae2db7c624ae621b62c0 /drivers/serial | |
| parent | 2548558445b43c1f18a61c0bd3629f92dffa612e (diff) | |
powerpc, of_serial: Endianness issues setting up the serial ports
The speed and clock of the serial ports is retrieved from the device
tree in both the PowerPC legacy serial code and the Open Firmware serial
driver, therefore they need to handle the fact that the device tree is
always big endian, while the CPU may not be.
Also fix other device tree references in the legacy serial code.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/of_serial.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index 2af8fd113123..17849dcb9adc 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -31,8 +31,8 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, { struct resource resource; struct device_node *np = ofdev->dev.of_node; - const unsigned int *clk, *spd; - const u32 *prop; + const __be32 *clk, *spd; + const __be32 *prop; int ret, prop_size; memset(port, 0, sizeof *port); @@ -55,23 +55,23 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, /* Check for shifted address mapping */ prop = of_get_property(np, "reg-offset", &prop_size); if (prop && (prop_size == sizeof(u32))) - port->mapbase += *prop; + port->mapbase += be32_to_cpup(prop); /* Check for registers offset within the devices address range */ prop = of_get_property(np, "reg-shift", &prop_size); if (prop && (prop_size == sizeof(u32))) - port->regshift = *prop; + port->regshift = be32_to_cpup(prop); port->irq = irq_of_parse_and_map(np, 0); port->iotype = UPIO_MEM; port->type = type; - port->uartclk = *clk; + port->uartclk = be32_to_cpup(clk); port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE; port->dev = &ofdev->dev; /* If current-speed was set, then try not to change it. */ if (spd) - port->custom_divisor = *clk / (16 * (*spd)); + port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd))); return 0; } |