isci: Add support for user parameters in SCIC layer

Add support for the following parameters in SCIC:

     /**
       * This field specifies the NOTIFY (ENABLE SPIN UP) primitive
       * insertion frequency for this phy index.
       */
      u32  notify_enable_spin_up_insertion_frequency;

      /**
       * This method specifies the number of transmitted DWORDs within which
       * to transmit a single ALIGN primitive.  This value applies regardless
       * of what type of device is attached or connection state.  A value of
       * 0 indicates that no ALIGN primitives will be inserted.
       */
      u16  align_insertion_frequency;

      /**
       * This method specifies the number of transmitted DWORDs within which
       * to transmit 2 ALIGN primitives.  This applies for SAS connections
       * only.  A minimum value of 3 is required for this field.
       */
      u16  in_connection_align_insertion_frequency;

Signed-off-by: Krzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

4 files changed, 66 insertions, 23 deletions

diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c
index e597c6b53eaa..d9fca9976889 100644
--- a/drivers/scsi/isci/core/scic_sds_controller.c
+++ b/drivers/scsi/isci/core/scic_sds_controller.c
@@ -616,7 +616,6 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic)
 		scu_afe_register_write(scic, afe_bias_control, 0x00005500);
 	else
 		scu_afe_register_write(scic, afe_bias_control, 0x00005A00);
-	
 
 	scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY);
 
@@ -625,7 +624,7 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic)
 		scu_afe_register_write(scic, afe_pll_control0, 0x80040A08);
 	else
 		scu_afe_register_write(scic, afe_pll_control0, 0x80040908);
-		
+
 	scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY);
 
 	/* Wait for the PLL to lock */
@@ -1962,17 +1961,16 @@ void scic_sds_controller_release_frame(
  *    configuration parameters to their default values.
  *
  */
-static void scic_sds_controller_set_default_config_parameters(
-	struct scic_sds_controller *this_controller)
+static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic)
 {
 	u16 index;
 
 	/* Default to no SSC operation. */
-	this_controller->oem_parameters.sds1.controller.do_enable_ssc = false;
+	scic->oem_parameters.sds1.controller.do_enable_ssc = false;
 
 	/* Initialize all of the port parameter information to narrow ports. */
 	for (index = 0; index < SCI_MAX_PORTS; index++) {
-		this_controller->oem_parameters.sds1.ports[index].phy_mask = 0;
+		scic->oem_parameters.sds1.ports[index].phy_mask = 0;
 	}
 
 	/* Initialize all of the phy parameter information. */
@@ -1980,24 +1978,27 @@ static void scic_sds_controller_set_default_config_parameters(
 		/*
 		 * Default to 3G (i.e. Gen 2) for now.  User can override if
 		 * they choose. */
-		this_controller->user_parameters.sds1.phys[index].max_speed_generation = 2;
+		scic->user_parameters.sds1.phys[index].max_speed_generation = 2;
+
+		/* the frequencies cannot be 0 */
+		scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f;
+		scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff;
+		scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33;
 
 		/*
 		 * Previous Vitesse based expanders had a arbitration issue that
 		 * is worked around by having the upper 32-bits of SAS address
 		 * with a value greater then the Vitesse company identifier.
 		 * Hence, usage of 0x5FCFFFFF. */
-		this_controller->oem_parameters.sds1.phys[index].sas_address.low
-			= 0x00000001;
-		this_controller->oem_parameters.sds1.phys[index].sas_address.high
-			= 0x5FCFFFFF;
+		scic->oem_parameters.sds1.phys[index].sas_address.low = 0x00000001;
+		scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF;
 	}
 
-	this_controller->user_parameters.sds1.stp_inactivity_timeout = 5;
-	this_controller->user_parameters.sds1.ssp_inactivity_timeout = 5;
-	this_controller->user_parameters.sds1.stp_max_occupancy_timeout = 5;
-	this_controller->user_parameters.sds1.ssp_max_occupancy_timeout = 20;
-	this_controller->user_parameters.sds1.no_outbound_task_timeout = 20;
+	scic->user_parameters.sds1.stp_inactivity_timeout = 5;
+	scic->user_parameters.sds1.ssp_inactivity_timeout = 5;
+	scic->user_parameters.sds1.stp_max_occupancy_timeout = 5;
+	scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20;
+	scic->user_parameters.sds1.no_outbound_task_timeout = 20;
 }
 
 
@@ -2103,9 +2104,9 @@ u32 scic_controller_get_suggested_start_timeout(
 	 *       per interval - 1 (once OEM parameters are supported).
 	 *       Currently we assume only 1 phy per interval. */
 
-	return (SCIC_SDS_SIGNATURE_FIS_TIMEOUT
+	return SCIC_SDS_SIGNATURE_FIS_TIMEOUT
 		+ SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT
-		+ ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL));
+		+ ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
 }
 
 /* --------------------------------------------------------------------------- */
@@ -2489,16 +2490,29 @@ enum sci_status scic_user_parameters_set(
 		 * Validate the user parameters.  If they are not legal, then
 		 * return a failure. */
 		for (index = 0; index < SCI_MAX_PHYS; index++) {
-			if (!
-			    (scic_parms->sds1.phys[index].max_speed_generation
+			if (!(scic_parms->sds1.phys[index].max_speed_generation
 			     <= SCIC_SDS_PARM_MAX_SPEED
 			     && scic_parms->sds1.phys[index].max_speed_generation
-			     > SCIC_SDS_PARM_NO_SPEED
-			    )
+			     > SCIC_SDS_PARM_NO_SPEED))
+				return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+			if (scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3)
+				return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+			if (
+			    (scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3) ||
+			    (scic_parms->sds1.phys[index].align_insertion_frequency == 0) ||
+			    (scic_parms->sds1.phys[index].notify_enable_spin_up_insertion_frequency == 0)
 			    )
 				return SCI_FAILURE_INVALID_PARAMETER_VALUE;
 		}
 
+		if ((scic_parms->sds1.stp_inactivity_timeout == 0) ||
+		   (scic_parms->sds1.ssp_inactivity_timeout == 0) ||
+		   (scic_parms->sds1.stp_max_occupancy_timeout == 0) ||
+		   (scic_parms->sds1.ssp_max_occupancy_timeout == 0) ||
+		   (scic_parms->sds1.no_outbound_task_timeout == 0))
+			return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
 		memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms));
 
 		return SCI_SUCCESS;
diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c
index bd0a6ba17b18..ecd7cc698ae6 100644
--- a/drivers/scsi/isci/core/scic_sds_phy.c
+++ b/drivers/scsi/isci/core/scic_sds_phy.c
@@ -125,6 +125,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
 	u32 parity_check = 0;
 	u32 parity_count = 0;
 	u32 link_layer_control;
+	u32 clksm_value = 0;
 
 	this_phy->link_layer_registers = link_layer_registers;
 
@@ -199,7 +200,20 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
 	SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all);
 
 	/* Set the enable spinup period but disable the ability to send notify enable spinup */
-	SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT, 0x33));
+	SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT,
+		this_phy->owning_port->owning_controller->user_parameters.sds1.
+		phys[this_phy->phy_index].notify_enable_spin_up_insertion_frequency));
+
+	/* Write the ALIGN Insertion Ferequency for connected phy and inpendent of connected state */
+	clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
+		this_phy->owning_port->owning_controller->user_parameters.sds1.
+			phys[this_phy->phy_index].in_connection_align_insertion_frequency);
+
+	clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
+		this_phy->owning_port->owning_controller->user_parameters.sds1.
+			phys[this_phy->phy_index].align_insertion_frequency);
+
+	SCU_SAS_CLKSM_WRITE(this_phy, clksm_value);
 
 #if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA)
 	/* / @todo Provide a way to write this register correctly */
diff --git a/drivers/scsi/isci/core/scic_sds_phy_registers.h b/drivers/scsi/isci/core/scic_sds_phy_registers.h
index 284217618031..ddbb2361510d 100644
--- a/drivers/scsi/isci/core/scic_sds_phy_registers.h
+++ b/drivers/scsi/isci/core/scic_sds_phy_registers.h
@@ -217,6 +217,14 @@
 #define SCU_SAS_ENSPINUP_WRITE(phy, value) \
 	scu_link_layer_register_write(phy, notify_enable_spinup_control, value)
 
+/* This macro reads the CLKSM register */
+#define SCU_SAS_CLKSM_READ(phy) \
+	scu_link_layer_register_read(phy, clock_skew_management)
+
+/* This macro writes the CLKSM register */
+#define SCU_SAS_CLKSM_WRITE(phy, value) \
+	scu_link_layer_register_write(phy, clock_skew_management, value)
+
 /* / This macro reads the PHY Capacity register */
 #define SCU_SAS_PHYCAP_READ(phy) \
 	scu_link_layer_register_read(phy, phy_capabilities)
diff --git a/drivers/scsi/isci/core/scu_registers.h b/drivers/scsi/isci/core/scu_registers.h
index de2ce93b7836..05a141181844 100644
--- a/drivers/scsi/isci/core/scu_registers.h
+++ b/drivers/scsi/isci/core/scu_registers.h
@@ -611,6 +611,13 @@
 #define SCU_SAS_PCFG_GEN_BIT(name) \
 	SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name)
 
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT      (0)
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK       (0x000007FF)
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT    (16)
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK     (0x00ff0000)
+
+#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \
+	SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value)
 
 #define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT    (0)
 #define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK     (0x0003FFFF)