Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 387 insertions, 0 deletions

diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
new file mode 100644
index 000000000000..3a7830667277
--- /dev/null
+++ b/drivers/scsi/sata_via.c
@@ -0,0 +1,387 @@
+/*
+   sata_via.c - VIA Serial ATA controllers
+
+   Maintained by:  Jeff Garzik <jgarzik@pobox.com>
+   		   Please ALWAYS copy linux-ide@vger.kernel.org
+ 		   on emails.
+
+   Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+   Copyright 2003-2004 Jeff Garzik
+
+   The contents of this file are subject to the Open
+   Software License version 1.1 that can be found at
+   http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+   by reference.
+
+   Alternatively, the contents of this file may be used under the terms
+   of the GNU General Public License version 2 (the "GPL") as distributed
+   in the kernel source COPYING file, in which case the provisions of
+   the GPL are applicable instead of the above.  If you wish to allow
+   the use of your version of this file only under the terms of the
+   GPL and not to allow others to use your version of this file under
+   the OSL, indicate your decision by deleting the provisions above and
+   replace them with the notice and other provisions required by the GPL.
+   If you do not delete the provisions above, a recipient may use your
+   version of this file under either the OSL or the GPL.
+
+   ----------------------------------------------------------------------
+
+   To-do list:
+   * VT6421 PATA support
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <asm/io.h>
+
+#define DRV_NAME	"sata_via"
+#define DRV_VERSION	"1.1"
+
+enum board_ids_enum {
+	vt6420,
+	vt6421,
+};
+
+enum {
+	SATA_CHAN_ENAB		= 0x40, /* SATA channel enable */
+	SATA_INT_GATE		= 0x41, /* SATA interrupt gating */
+	SATA_NATIVE_MODE	= 0x42, /* Native mode enable */
+	SATA_PATA_SHARING	= 0x49, /* PATA/SATA sharing func ctrl */
+
+	PORT0			= (1 << 1),
+	PORT1			= (1 << 0),
+	ALL_PORTS		= PORT0 | PORT1,
+	N_PORTS			= 2,
+
+	NATIVE_MODE_ALL		= (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
+
+	SATA_EXT_PHY		= (1 << 6), /* 0==use PATA, 1==ext phy */
+	SATA_2DEV		= (1 << 5), /* SATA is master/slave */
+};
+
+static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
+static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+
+static struct pci_device_id svia_pci_tbl[] = {
+	{ 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
+	{ 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 },
+
+	{ }	/* terminate list */
+};
+
+static struct pci_driver svia_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= svia_pci_tbl,
+	.probe			= svia_init_one,
+	.remove			= ata_pci_remove_one,
+};
+
+static Scsi_Host_Template svia_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.eh_strategy_handler	= ata_scsi_error,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+	.ordered_flush		= 1,
+};
+
+static struct ata_port_operations svia_sata_ops = {
+	.port_disable		= ata_port_disable,
+
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.check_status		= ata_check_status,
+	.exec_command		= ata_exec_command,
+	.dev_select		= ata_std_dev_select,
+
+	.phy_reset		= sata_phy_reset,
+
+	.bmdma_setup            = ata_bmdma_setup,
+	.bmdma_start            = ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
+
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+
+	.eng_timeout		= ata_eng_timeout,
+
+	.irq_handler		= ata_interrupt,
+	.irq_clear		= ata_bmdma_irq_clear,
+
+	.scr_read		= svia_scr_read,
+	.scr_write		= svia_scr_write,
+
+	.port_start		= ata_port_start,
+	.port_stop		= ata_port_stop,
+};
+
+static struct ata_port_info svia_port_info = {
+	.sht		= &svia_sht,
+	.host_flags	= ATA_FLAG_SATA | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY,
+	.pio_mask	= 0x1f,
+	.mwdma_mask	= 0x07,
+	.udma_mask	= 0x7f,
+	.port_ops	= &svia_sata_ops,
+};
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, svia_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+	if (sc_reg > SCR_CONTROL)
+		return 0xffffffffU;
+	return inl(ap->ioaddr.scr_addr + (4 * sc_reg));
+}
+
+static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+{
+	if (sc_reg > SCR_CONTROL)
+		return;
+	outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
+}
+
+static const unsigned int svia_bar_sizes[] = {
+	8, 4, 8, 4, 16, 256
+};
+
+static const unsigned int vt6421_bar_sizes[] = {
+	16, 16, 16, 16, 32, 128
+};
+
+static unsigned long svia_scr_addr(unsigned long addr, unsigned int port)
+{
+	return addr + (port * 128);
+}
+
+static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port)
+{
+	return addr + (port * 64);
+}
+
+static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
+			      struct pci_dev *pdev,
+			      unsigned int port)
+{
+	unsigned long reg_addr = pci_resource_start(pdev, port);
+	unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8);
+	unsigned long scr_addr;
+
+	probe_ent->port[port].cmd_addr = reg_addr;
+	probe_ent->port[port].altstatus_addr =
+	probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS;
+	probe_ent->port[port].bmdma_addr = bmdma_addr;
+
+	scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port);
+	probe_ent->port[port].scr_addr = scr_addr;
+
+	ata_std_ports(&probe_ent->port[port]);
+}
+
+static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
+{
+	struct ata_probe_ent *probe_ent;
+	struct ata_port_info *ppi = &svia_port_info;
+
+	probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+	if (!probe_ent)
+		return NULL;
+
+	probe_ent->port[0].scr_addr =
+		svia_scr_addr(pci_resource_start(pdev, 5), 0);
+	probe_ent->port[1].scr_addr =
+		svia_scr_addr(pci_resource_start(pdev, 5), 1);
+
+	return probe_ent;
+}
+
+static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
+{
+	struct ata_probe_ent *probe_ent;
+	unsigned int i;
+
+	probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+	if (!probe_ent)
+		return NULL;
+
+	memset(probe_ent, 0, sizeof(*probe_ent));
+	probe_ent->dev = pci_dev_to_dev(pdev);
+	INIT_LIST_HEAD(&probe_ent->node);
+
+	probe_ent->sht		= &svia_sht;
+	probe_ent->host_flags	= ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
+				  ATA_FLAG_NO_LEGACY;
+	probe_ent->port_ops	= &svia_sata_ops;
+	probe_ent->n_ports	= N_PORTS;
+	probe_ent->irq		= pdev->irq;
+	probe_ent->irq_flags	= SA_SHIRQ;
+	probe_ent->pio_mask	= 0x1f;
+	probe_ent->mwdma_mask	= 0x07;
+	probe_ent->udma_mask	= 0x7f;
+
+	for (i = 0; i < N_PORTS; i++)
+		vt6421_init_addrs(probe_ent, pdev, i);
+
+	return probe_ent;
+}
+
+static void svia_configure(struct pci_dev *pdev)
+{
+	u8 tmp8;
+
+	pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
+	printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
+	       pci_name(pdev),
+	       (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
+
+	/* make sure SATA channels are enabled */
+	pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
+	if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
+		printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
+		       pci_name(pdev), (int) tmp8);
+		tmp8 |= ALL_PORTS;
+		pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
+	}
+
+	/* make sure interrupts for each channel sent to us */
+	pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
+	if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
+		printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
+		       pci_name(pdev), (int) tmp8);
+		tmp8 |= ALL_PORTS;
+		pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
+	}
+
+	/* make sure native mode is enabled */
+	pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
+	if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
+		printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
+		       pci_name(pdev), (int) tmp8);
+		tmp8 |= NATIVE_MODE_ALL;
+		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
+	}
+}
+
+static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static int printed_version;
+	unsigned int i;
+	int rc;
+	struct ata_probe_ent *probe_ent;
+	int board_id = (int) ent->driver_data;
+	const int *bar_sizes;
+	int pci_dev_busy = 0;
+	u8 tmp8;
+
+	if (!printed_version++)
+		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc) {
+		pci_dev_busy = 1;
+		goto err_out;
+	}
+
+	if (board_id == vt6420) {
+		pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
+		if (tmp8 & SATA_2DEV) {
+			printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
+		       	pci_name(pdev), (int) tmp8);
+			rc = -EIO;
+			goto err_out_regions;
+		}
+
+		bar_sizes = &svia_bar_sizes[0];
+	} else {
+		bar_sizes = &vt6421_bar_sizes[0];
+	}
+
+	for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
+		if ((pci_resource_start(pdev, i) == 0) ||
+		    (pci_resource_len(pdev, i) < bar_sizes[i])) {
+			printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
+			       pci_name(pdev), i,
+			       pci_resource_start(pdev, i),
+			       pci_resource_len(pdev, i));
+			rc = -ENODEV;
+			goto err_out_regions;
+		}
+
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		goto err_out_regions;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		goto err_out_regions;
+
+	if (board_id == vt6420)
+		probe_ent = vt6420_init_probe_ent(pdev);
+	else
+		probe_ent = vt6421_init_probe_ent(pdev);
+	
+	if (!probe_ent) {
+		printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
+		       pci_name(pdev));
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	svia_configure(pdev);
+
+	pci_set_master(pdev);
+
+	/* FIXME: check ata_device_add return value */
+	ata_device_add(probe_ent);
+	kfree(probe_ent);
+
+	return 0;
+
+err_out_regions:
+	pci_release_regions(pdev);
+err_out:
+	if (!pci_dev_busy)
+		pci_disable_device(pdev);
+	return rc;
+}
+
+static int __init svia_init(void)
+{
+	return pci_module_init(&svia_pci_driver);
+}
+
+static void __exit svia_exit(void)
+{
+	pci_unregister_driver(&svia_pci_driver);
+}
+
+module_init(svia_init);
+module_exit(svia_exit);
+