[SCSI] lpfc 8.1.4 : Introduce lpfc_reset_barrier() function for resets on dual channel adapters

Introduce lpfc_reset_barrier() function for resets on dual channel adapters

Workaround for a hardware errata on dual channel asics. There is a
potential for the chip to lock up on a reset if a shared dma engine is in
use. The (ugly) work around requires a reset process which uses a mailbox
command to synchronize the independent channels prior to the reset to
avoid the issue. Unfortunately, the timing windows required to ensure this
workaround succeeds are very specific, meaning we can't release the cpu
during the barrier.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

5 files changed, 100 insertions, 9 deletions

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 2f67a8a92599..087c44539a16 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -197,6 +197,7 @@ struct lpfc_hba {
 #define LPFC_HBA_READY            32
 #define LPFC_HBA_ERROR            -1
 
+	int32_t stopped;   /* HBA has not been restarted since last ERATT */
 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
 
 	uint32_t fc_eventTag;	/* event tag for link attention */
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f716c1d85f41..fad607b2e6f4 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -139,6 +139,7 @@ struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
 void lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb);
 uint16_t lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocb);
 
+void lpfc_reset_barrier(struct lpfc_hba * phba);
 int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
 int lpfc_sli_brdkill(struct lpfc_hba *);
 int lpfc_sli_brdreset(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 82704148d5d4..f54089fe4732 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -155,6 +155,7 @@ lpfc_work_list_done(struct lpfc_hba * phba)
 		case LPFC_EVT_WARM_START:
 			if (phba->hba_state >= LPFC_LINK_DOWN)
 				lpfc_offline(phba);
+			lpfc_reset_barrier(phba);
 			lpfc_sli_brdreset(phba);
 			lpfc_hba_down_post(phba);
 			*(int *)(evtp->evt_arg1) =
@@ -164,7 +165,8 @@ lpfc_work_list_done(struct lpfc_hba * phba)
 		case LPFC_EVT_KILL:
 			if (phba->hba_state >= LPFC_LINK_DOWN)
 				lpfc_offline(phba);
-			*(int *)(evtp->evt_arg1)  = lpfc_sli_brdkill(phba);
+			*(int *)(evtp->evt_arg1)
+				= (phba->stopped) ? 0 : lpfc_sli_brdkill(phba);
 			complete((struct completion *)(evtp->evt_arg2));
 			break;
 		}
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a2e15436730e..66d5d003555d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -464,8 +464,6 @@ lpfc_hba_down_prep(struct lpfc_hba * phba)
 	lpfc_els_flush_cmd(phba);
 	lpfc_disc_flush_list(phba);
 
-	/* Disable SLI2 since we disabled interrupts */
-	phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
 	return (0);
 }
 
@@ -526,6 +524,7 @@ lpfc_handle_eratt(struct lpfc_hba * phba)
 				phba->work_status[0], phba->work_status[1]);
 		spin_lock_irq(phba->host->host_lock);
 		phba->fc_flag |= FC_ESTABLISH_LINK;
+		psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
 		spin_unlock_irq(phba->host->host_lock);
 
 		/*
@@ -559,6 +558,7 @@ lpfc_handle_eratt(struct lpfc_hba * phba)
 				phba->brd_no, phba->work_hs,
 				phba->work_status[0], phba->work_status[1]);
 
+		psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
 		lpfc_offline(phba);
 		phba->hba_state = LPFC_HBA_ERROR;
 		lpfc_hba_down_post(phba);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 764aadbec71b..bb69a7a1ec59 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1566,6 +1566,79 @@ lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask)
 	return retval;
 }
 
+#define BARRIER_TEST_PATTERN (0xdeadbeef)
+
+void lpfc_reset_barrier(struct lpfc_hba * phba)
+{
+	uint32_t * resp_buf;
+	uint32_t * mbox_buf;
+	volatile uint32_t mbox;
+	uint32_t hc_copy;
+	int  i;
+	uint8_t hdrtype;
+
+	pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
+	if (hdrtype != 0x80 ||
+	    (FC_JEDEC_ID(phba->vpd.rev.biuRev) != HELIOS_JEDEC_ID &&
+	     FC_JEDEC_ID(phba->vpd.rev.biuRev) != THOR_JEDEC_ID))
+		return;
+
+	/*
+	 * Tell the other part of the chip to suspend temporarily all
+	 * its DMA activity.
+	 */
+	resp_buf =  (uint32_t *)phba->MBslimaddr;
+
+	/* Disable the error attention */
+	hc_copy = readl(phba->HCregaddr);
+	writel((hc_copy & ~HC_ERINT_ENA), phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+
+	if (readl(phba->HAregaddr) & HA_ERATT) {
+		/* Clear Chip error bit */
+		writel(HA_ERATT, phba->HAregaddr);
+		phba->stopped = 1;
+	}
+
+	mbox = 0;
+	((MAILBOX_t *)&mbox)->mbxCommand = MBX_KILL_BOARD;
+	((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
+
+	writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
+	mbox_buf = (uint32_t *)phba->MBslimaddr;
+	writel(mbox, mbox_buf);
+
+	for (i = 0;
+	     readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN) && i < 50; i++)
+		mdelay(1);
+
+	if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
+		if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
+		    phba->stopped)
+			goto restore_hc;
+		else
+			goto clear_errat;
+	}
+
+	((MAILBOX_t *)&mbox)->mbxOwner = OWN_HOST;
+	for (i = 0; readl(resp_buf) != mbox &&  i < 500; i++)
+		mdelay(1);
+
+clear_errat:
+
+	while (!(readl(phba->HAregaddr) & HA_ERATT) && ++i < 500)
+		mdelay(1);
+
+	if (readl(phba->HAregaddr) & HA_ERATT) {
+		writel(HA_ERATT, phba->HAregaddr);
+		phba->stopped = 1;
+	}
+
+restore_hc:
+	writel(hc_copy, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+}
+
 int
 lpfc_sli_brdkill(struct lpfc_hba * phba)
 {
@@ -1588,9 +1661,8 @@ lpfc_sli_brdkill(struct lpfc_hba * phba)
 		psli->sli_flag);
 
 	if ((pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
-						  GFP_ATOMIC)) == 0) {
+						  GFP_KERNEL)) == 0)
 		return 1;
-	}
 
 	/* Disable the error attention */
 	spin_lock_irq(phba->host->host_lock);
@@ -1610,6 +1682,8 @@ lpfc_sli_brdkill(struct lpfc_hba * phba)
 		return 1;
 	}
 
+	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+
 	mempool_free(pmb, phba->mbox_mem_pool);
 
 	/* There is no completion for a KILL_BOARD mbox cmd. Check for an error
@@ -1625,7 +1699,10 @@ lpfc_sli_brdkill(struct lpfc_hba * phba)
 	}
 
 	del_timer_sync(&psli->mbox_tmo);
-
+	if (ha_copy & HA_ERATT) {
+		writel(HA_ERATT, phba->HAregaddr);
+		phba->stopped = 1;
+	}
 	spin_lock_irq(phba->host->host_lock);
 	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 	spin_unlock_irq(phba->host->host_lock);
@@ -1665,6 +1742,7 @@ lpfc_sli_brdreset(struct lpfc_hba * phba)
 			      (cfg_value &
 			       ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
 
+	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
 	/* Now toggle INITFF bit in the Host Control Register */
 	writel(HC_INITFF, phba->HCregaddr);
 	mdelay(1);
@@ -1713,6 +1791,8 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
 	mb->mbxCommand = MBX_RESTART;
 	mb->mbxHc = 1;
 
+	lpfc_reset_barrier(phba);
+
 	to_slim = phba->MBslimaddr;
 	writel(*(uint32_t *) mb, to_slim);
 	readl(to_slim); /* flush */
@@ -1730,7 +1810,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
 	readl(to_slim); /* flush */
 
 	lpfc_sli_brdreset(phba);
-
+	phba->stopped = 0;
 	phba->hba_state = LPFC_INIT_START;
 
 	spin_unlock_irq(phba->host->host_lock);
@@ -2038,6 +2118,13 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 		return (MBX_NOT_FINISHED);
 	}
 
+	if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
+	    !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
+		spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
+		LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
+		return (MBX_NOT_FINISHED);
+	}
+
 	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
 		/* Polling for a mbox command when another one is already active
 		 * is not allowed in SLI. Also, the driver must have established
@@ -2154,8 +2241,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 		/* First copy command data to host SLIM area */
 		lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
 	} else {
-		if (mb->mbxCommand == MBX_CONFIG_PORT ||
-		    mb->mbxCommand == MBX_KILL_BOARD) {
+		if (mb->mbxCommand == MBX_CONFIG_PORT) {
 			/* copy command data into host mbox for cmpl */
 			lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
 					MAILBOX_CMD_SIZE);
@@ -3121,6 +3207,7 @@ lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs)
 			/* Clear Chip error bit */
 			writel(HA_ERATT, phba->HAregaddr);
 			readl(phba->HAregaddr); /* flush */
+			phba->stopped = 1;
 		}
 
 		spin_lock(phba->host->host_lock);