isci: Add support for probing OROM for OEM params

We need to scan the OROM for signature and grab the OEM parameters. We
also need to do the same for EFI. If all fails then we resort to user
binary blob, and if that fails then we go to the defaults.

Share the format with the create_fw utility so that all possible sources
of the parameters are in-sync.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

2 files changed, 122 insertions, 142 deletions

diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c
index 442caac9675d..f8f96d6eb7df 100644
--- a/drivers/scsi/isci/firmware/create_fw.c
+++ b/drivers/scsi/isci/firmware/create_fw.c
@@ -6,157 +6,30 @@
 #include <fcntl.h>
 #include <string.h>
 #include <errno.h>
+#include <asm/types.h>
+#include <strings.h>
+#include <stdint.h>
 
-char blob_name[] = "isci_firmware.bin";
-char id[] = "#SCU MAGIC#";
-unsigned char version = 1;
-unsigned char sub_version = 0;
-
-
-/*
- * For all defined arrays:
- * elements 0-3 are for SCU0, ports 0-3
- * elements 4-7 are for SCU1, ports 0-3
- *
- * valid configurations for one SCU are:
- *  P0  P1  P2  P3
- * ----------------
- * 0xF,0x0,0x0,0x0 # 1 x4 port
- * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
- *                 # ports
- * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
- *                 # port
- * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
- * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
- *
- * if there is a port/phy on which you do not wish to override the default
- * values, use the value assigned to UNINIT_PARAM (255).
- */
-unsigned int phy_mask[] = { 1, 2, 4, 8, 1, 2, 4, 8 };
-
-
-/* denotes SAS generation. i.e. 3: SAS Gen 3 6G */
-unsigned int phy_gen[] = { 3, 3, 3, 3, 3, 3, 3, 3 };
-
-/*
- * if there is a port/phy on which you do not wish to override the default
- * values, use the value "0000000000000000". SAS address of zero's is
- * considered invalid and will not be used.
- */
-unsigned long long sas_addr[] = { 0x5FCFFFFFF0000000ULL,
-				  0x5FCFFFFFF1000000ULL,
-				  0x5FCFFFFFF2000000ULL,
-				  0x5FCFFFFFF3000000ULL,
-				  0x5FCFFFFFF4000000ULL,
-				  0x5FCFFFFFF5000000ULL,
-				  0x5FCFFFFFF6000000ULL,
-				  0x5FCFFFFFF7000000ULL };
-
-int write_blob(void)
+#include "create_fw.h"
+#include "../probe_roms.h"
+
+int write_blob(struct isci_orom *isci_orom)
 {
 	FILE *fd;
 	int err;
+	size_t count;
 
 	fd = fopen(blob_name, "w+");
 	if (!fd) {
 		perror("Open file for write failed");
+		fclose(fd);
 		return -EIO;
 	}
 
-	/* write id */
-	err = fwrite((void *)id, sizeof(char), strlen(id)+1, fd);
-	if (err == 0) {
-		perror("write id failed");
-		return err;
-	}
-
-	/* write version */
-	err = fwrite((void *)&version, sizeof(version), 1, fd);
-	if (err == 0) {
-		perror("write version failed");
-		return err;
-	}
-
-	/* write sub version */
-	err = fwrite((void *)&sub_version, sizeof(sub_version), 1, fd);
-	if (err == 0) {
-		perror("write subversion failed");
-		return err;
-	}
-
-	/* write phy mask header */
-	err = fputc(0x1, fd);
-	if (err == EOF) {
-		perror("write phy mask header failed");
-		return -EIO;
-	}
-
-	/* write size */
-	err = fputc(8, fd);
-	if (err == EOF) {
-		perror("write phy mask size failed");
-		return -EIO;
-	}
-
-	/* write phy masks */
-	err = fwrite((void *)phy_mask, 1, sizeof(phy_mask), fd);
-	if (err == 0) {
-		perror("write phy_mask failed");
-		return err;
-	}
-
-	/* write phy gen header */
-	err = fputc(0x2, fd);
-	if (err == EOF) {
-		perror("write phy gen header failed");
-		return -EIO;
-	}
-
-	/* write size */
-	err = fputc(8, fd);
-	if (err == EOF) {
-		perror("write phy gen size failed");
-		return -EIO;
-	}
-
-	/* write phy_gen */
-	err = fwrite((void *)phy_gen,
-		     1,
-		     sizeof(phy_gen),
-		     fd);
-	if (err == 0) {
-		perror("write phy_gen failed");
-		return err;
-	}
-
-	/* write phy gen header */
-	err = fputc(0x3, fd);
-	if (err == EOF) {
-		perror("write sas addr header failed");
-		return -EIO;
-	}
-
-	/* write size */
-	err = fputc(8, fd);
-	if (err == EOF) {
-		perror("write sas addr size failed");
-		return -EIO;
-	}
-
-	/* write sas_addr */
-	err = fwrite((void *)sas_addr,
-		     1,
-		     sizeof(sas_addr),
-		     fd);
-	if (err == 0) {
-		perror("write sas_addr failed");
-		return err;
-	}
-
-	/* write end header */
-	err = fputc(0xff, fd);
-	if (err == EOF) {
-		perror("write end header failed");
+	count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd);
+	if (count != 1) {
+		perror("Write data failed");
+		fclose(fd);
 		return -EIO;
 	}
 
@@ -165,13 +38,53 @@ int write_blob(void)
 	return 0;
 }
 
+void set_binary_values(struct isci_orom *isci_orom)
+{
+	int ctrl_idx, phy_idx, port_idx;
+
+	/* setting OROM signature */
+	strncpy(isci_orom->hdr.signature, sig, strlen(sig));
+	isci_orom->hdr.version = 0x10;
+	isci_orom->hdr.total_block_length = sizeof(struct isci_orom);
+	isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr);
+	isci_orom->hdr.num_elements = num_elements;
+
+	for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) {
+		isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type;
+		isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up =
+			max_num_concurrent_dev_spin_up;
+		isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc =
+			enable_ssc;
+
+		for (port_idx = 0; port_idx < 4; port_idx++)
+			isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask =
+				phy_mask[ctrl_idx][port_idx];
+
+		for (phy_idx = 0; phy_idx < 4; phy_idx++) {
+			isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high =
+				(__u32)(sas_addr[ctrl_idx][phy_idx] >> 32);
+			isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low =
+				(__u32)(sas_addr[ctrl_idx][phy_idx]);
+		}
+	}
+}
+
 int main(void)
 {
 	int err;
+	struct isci_orom *isci_orom;
+
+	isci_orom = malloc(sizeof(struct isci_orom));
+	memset(isci_orom, 0, sizeof(struct isci_orom));
 
-	err = write_blob();
-	if (err < 0)
+	set_binary_values(isci_orom);
+
+	err = write_blob(isci_orom);
+	if (err < 0) {
+		free(isci_orom);
 		return err;
+	}
 
+	free(isci_orom);
 	return 0;
 }
diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h
new file mode 100644
index 000000000000..bedbe4fad181
--- /dev/null
+++ b/drivers/scsi/isci/firmware/create_fw.h
@@ -0,0 +1,67 @@
+#ifndef _CREATE_FW_H_
+#define _CREATE_FW_H_
+
+
+/* we are configuring for 2 SCUs */
+static const int num_elements = 2;
+
+/*
+ * For all defined arrays:
+ * elements 0-3 are for SCU0, ports 0-3
+ * elements 4-7 are for SCU1, ports 0-3
+ *
+ * valid configurations for one SCU are:
+ *  P0  P1  P2  P3
+ * ----------------
+ * 0xF,0x0,0x0,0x0 # 1 x4 port
+ * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
+ *                 # ports
+ * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
+ *                 # port
+ * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
+ * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
+ *
+ * if there is a port/phy on which you do not wish to override the default
+ * values, use the value assigned to UNINIT_PARAM (255).
+ */
+#ifdef MPC
+static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
+				     {1, 2, 4, 8} };
+#else	/* APC (default) */
+static const __u8 phy_mask[2][4];
+#endif
+
+/* discovery mode type (port auto config mode by default ) */
+static const int mode_type;
+
+/* Maximum number of concurrent device spin up */
+static const int max_num_concurrent_dev_spin_up = 1;
+
+/* enable of ssc operation */
+static const int enable_ssc;
+
+/* AFE_TX_AMP_CONTROL */
+static const unsigned int afe_tx_amp_control0 = 0x000e7c03;
+static const unsigned int afe_tx_amp_control1 = 0x000e7c03;
+static const unsigned int afe_tx_amp_control2 = 0x000e7c03;
+static const unsigned int afe_tx_amp_control3 = 0x000e7c03;
+
+/*
+ * if there is a port/phy on which you do not wish to override the default
+ * values, use the value "0000000000000000". SAS address of zero's is
+ * considered invalid and will not be used.
+ */
+static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000000ULL,
+						     0x5FCFFFFFF1000000ULL,
+						     0x5FCFFFFFF2000000ULL,
+						     0x5FCFFFFFF3000000ULL },
+						   { 0x5FCFFFFFF4000000ULL,
+						     0x5FCFFFFFF5000000ULL,
+						     0x5FCFFFFFF6000000ULL,
+						     0x5FCFFFFFF7000000ULL } };
+
+static const char blob_name[] = "isci_firmware.bin";
+static const char sig[] = "ISCUOEMB";
+static const unsigned char version = 1;
+
+#endif