diff options
| author | Finn Thain <fthain@telegraphics.com.au> | 2016-01-03 16:05:11 +1100 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2016-01-06 21:42:53 -0500 |
| commit | 9c3f0e2b52ada30fe72beec27b83e91e12566609 (patch) | |
| tree | b8b44d2c48773e66374b5de37eefeea52f8b9d36 /drivers/scsi/NCR5380.c | |
| parent | 636b1ec8575a60fb305ad6e3ede5e79d287754b6 (diff) | |
atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT
The atari_NCR5380.c core driver now takes care of bus reset upon driver
initialization if required (same as NCR5380.c). Move the Toshiba CD-ROM
support into the core driver, enabled with a host flag, so that all
NCR5380 drivers can make use of it.
Drop the RESET_BOOT macros and the ATARI_SCSI_RESET_BOOT and
ATARI_SCSI_TOSHIBA_DELAY Kconfig symbols, which are now redundant.
Remove the atari_scsi_reset_boot(), mac_scsi_reset_boot() and
sun3_scsi_reset_boot() routines. None of this duplicated code is needed
now that all drivers can use NCR5380_maybe_reset_bus().
This brings atari_scsi, mac_scsi and sun3_scsi into line with all of the
other NCR5380 drivers.
The bus reset may raise an interrupt. That would be new behaviour for
atari_scsi only when CONFIG_ATARI_SCSI_RESET_BOOT=n. The ST DMA interrupt
is not assigned to atari_scsi at this stage, so
CONFIG_ATARI_SCSI_RESET_BOOT=y may well be problematic already.
Regardless, do_reset() now raises and clears the interrupt within
local_irq_save/restore which should avoid problems.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/NCR5380.c')
| -rw-r--r-- | drivers/scsi/NCR5380.c | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 391ee8db5de1..7ccf2e37b6ad 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -618,7 +618,7 @@ static void prepare_info(struct Scsi_Host *instance) "base 0x%lx, irq %d, " "can_queue %d, cmd_per_lun %d, " "sg_tablesize %d, this_id %d, " - "flags { %s%s%s}, " + "flags { %s%s%s%s}, " #if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG) "USLEEP_POLL %lu, USLEEP_WAITLONG %lu, " #endif @@ -630,6 +630,7 @@ static void prepare_info(struct Scsi_Host *instance) hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "", hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "", hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "", + hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "", #if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG) USLEEP_POLL, USLEEP_WAITLONG, #endif @@ -831,6 +832,7 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags) static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance) { + struct NCR5380_hostdata *hostdata = shost_priv(instance); int pass; for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) { @@ -849,6 +851,14 @@ static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance) case 4: shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n"); do_reset(instance); + /* Wait after a reset; the SCSI standard calls for + * 250ms, we wait 500ms to be on the safe side. + * But some Toshiba CD-ROMs need ten times that. + */ + if (hostdata->flags & FLAG_TOSHIBA_DELAY) + msleep(2500); + else + msleep(500); break; case 6: shost_printk(KERN_ERR, instance, "bus locked solid\n"); @@ -1253,7 +1263,10 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) * a minimum so we'll udelay ceil(1.2) */ - udelay(2); + if (hostdata->flags & FLAG_TOSHIBA_DELAY) + udelay(15); + else + udelay(2); dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no); |