diff options
| author | Yauhen Kharuzhy <jekhor@gmail.com> | 2019-10-05 23:42:55 +0300 |
|---|---|---|
| committer | Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 2019-10-15 10:55:10 +0300 |
| commit | d740795d9273dafb02ed809f3b68d62388bc08d9 (patch) | |
| tree | e6580c7b23bb6a26ab8a515df8f50ba61f70b330 /drivers/platform/x86/Kconfig | |
| parent | c656829f073b244ae84f6c41a213ec619434f8fe (diff) | |
platform/x86: intel_cht_int33fe: Split code to Micro-B and Type-C
Existing intel_cht_int33fe ACPI pseudo-device driver assumes that
hardware has Type-C connector and register related devices described as
I2C connections in the _CRS resource.
There is at least one hardware (Lenovo Yoga Book YB1-91L/F) with Micro-B
USB connector exists. It has INT33FE device in the DSDT table but
there are only two I2C connection described: PMIC and BQ27452 battery
fuel gauge.
Splitting existing INT33FE driver allow to maintain code for USB Micro-B
(or AB) connector variant separately and make it simpler.
Split driver to intel_cht_int33fe_common.c and
intel_cht_int33fe_{microb,typec}.c. Compile all this sources to one .ko
module to make user experience easier.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Diffstat (limited to 'drivers/platform/x86/Kconfig')
| -rw-r--r-- | drivers/platform/x86/Kconfig | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 3c55f05f6ec3..da958684f767 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -927,14 +927,20 @@ config INTEL_CHT_INT33FE This driver add support for the INT33FE ACPI device found on some Intel Cherry Trail devices. + There are two kinds of INT33FE ACPI device possible: for hardware + with USB Type-C and Micro-B connectors. This driver supports both. + The INT33FE ACPI device has a CRS table with I2cSerialBusV2 - resources for 3 devices: Maxim MAX17047 Fuel Gauge Controller, + resources for Fuel Gauge Controller and (in the Type-C variant) FUSB302 USB Type-C Controller and PI3USB30532 USB switch. This driver instantiates i2c-clients for these, so that standard i2c drivers for these chips can bind to the them. If you enable this driver it is advised to also select - CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m. + CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B + device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m + for Type-C device. + config INTEL_INT0002_VGPIO tristate "Intel ACPI INT0002 Virtual GPIO driver" |