diff options
| author | Manu Gautam <mgautam@codeaurora.org> | 2018-01-16 16:27:00 +0530 |
|---|---|---|
| committer | Kishon Vijay Abraham I <kishon@ti.com> | 2018-03-08 13:56:08 +0530 |
| commit | c6549f0eefc4d492954af11421d359265c155a91 (patch) | |
| tree | a274eaefc2d308622393d76e135ed2db827d65f7 /drivers/phy | |
| parent | 937e17f36a32fc2ec01b9f99bac5b80acf22923c (diff) | |
phy: qcom-qmp: Fix PHY block reset sequence
PHY block or asynchronous reset requires signal
to be asserted before de-asserting. Driver is only
de-asserting signal which is already low, hence
reset operation is a no-op. Fix this by asserting
signal first. Also, resetting requires PHY clocks
to be turned ON only after reset is finished. Fix
that as well.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.c | 28 |
1 files changed, 19 insertions, 9 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 1b82cea7a79b..ecff2616dc84 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -752,13 +752,16 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) goto err_reg_enable; } - ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); - if (ret) { - dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret); - goto err_clk_enable; + for (i = 0; i < cfg->num_resets; i++) { + ret = reset_control_assert(qmp->resets[i]); + if (ret) { + dev_err(qmp->dev, "%s reset assert failed\n", + cfg->reset_list[i]); + goto err_rst_assert; + } } - for (i = 0; i < cfg->num_resets; i++) { + for (i = cfg->num_resets - 1; i >= 0; i--) { ret = reset_control_deassert(qmp->resets[i]); if (ret) { dev_err(qmp->dev, "%s reset deassert failed\n", @@ -767,6 +770,12 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) } } + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); + if (ret) { + dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret); + goto err_rst; + } + if (cfg->has_phy_com_ctrl) qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], SW_PWRDN); @@ -791,7 +800,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) if (ret) { dev_err(qmp->dev, "phy common block init timed-out\n"); - goto err_rst; + goto err_com_init; } } @@ -799,11 +808,12 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) return 0; +err_com_init: + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); err_rst: - while (--i >= 0) + while (++i < cfg->num_resets) reset_control_assert(qmp->resets[i]); - clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); -err_clk_enable: +err_rst_assert: regulator_bulk_disable(cfg->num_vregs, qmp->vregs); err_reg_enable: mutex_unlock(&qmp->phy_mutex); |