diff options
| author | Ray Jui <rjui@broadcom.com> | 2015-09-15 17:39:18 -0700 |
|---|---|---|
| committer | Bjorn Helgaas <bhelgaas@google.com> | 2015-09-25 18:13:04 -0500 |
| commit | 199ff14100095d52cd1b232cc0f3b12f348b5b07 (patch) | |
| tree | fafdda2d525c497e81f75920b1a77da7ab11d71a /drivers/pci/host | |
| parent | bdb8a1844f3113ec08915d1e8e3fd5686fb2fb78 (diff) | |
PCI: iproc: Fix PCIe reset logic
The current reset logic does not always properly reset the device. For
example, in the case when the perst_b signal is already de-asserted in the
bootloader, the current reset logic fails to trigger a proper assert ->
de-assert reset sequence.
Fix the issue by always triggering the proper reset sequence.
Also explicitly select the desired reset source, i.e., perst_b, and reduce
the wait time after the device comes out of reset from 250 ms to 100 ms,
based on recommendation from the ASIC team.
Tested-by: Vladimir Dreizin <vdreizin@broadcom.com>
Tested-by: Darren Edamura <dedamura@broadcom.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vladimir Dreizin <vdreizin@broadcom.com>
Reviewed-by: Trac Hoang <trhoang@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Diffstat (limited to 'drivers/pci/host')
| -rw-r--r-- | drivers/pci/host/pcie-iproc.c | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c index 52e7ff22d7ea..80e0541548a1 100644 --- a/drivers/pci/host/pcie-iproc.c +++ b/drivers/pci/host/pcie-iproc.c @@ -31,6 +31,8 @@ #include "pcie-iproc.h" #define CLK_CONTROL_OFFSET 0x000 +#define EP_PERST_SOURCE_SELECT_SHIFT 2 +#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) #define EP_MODE_SURVIVE_PERST_SHIFT 1 #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) #define RC_PCIE_RST_OUTPUT_SHIFT 0 @@ -119,15 +121,18 @@ static void iproc_pcie_reset(struct iproc_pcie *pcie) u32 val; /* - * Configure the PCIe controller as root complex and send a downstream - * reset + * Select perst_b signal as reset source. Put the device into reset, + * and then bring it out of reset */ - val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT; + val = readl(pcie->base + CLK_CONTROL_OFFSET); + val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & + ~RC_PCIE_RST_OUTPUT; writel(val, pcie->base + CLK_CONTROL_OFFSET); udelay(250); - val &= ~EP_MODE_SURVIVE_PERST; + + val |= RC_PCIE_RST_OUTPUT; writel(val, pcie->base + CLK_CONTROL_OFFSET); - msleep(250); + msleep(100); } static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus) |