Merge tag 'mac80211-next-for-davem-2015-03-30' into iwlwifi-next

Lots of updates for net-next; along with the usual flurry
of small fixes, cleanups and internal features we have:
 * VHT support for TDLS and IBSS (conditional on drivers though)
 * first TX performance improvements (the biggest will come later)
 * many suspend/resume (race) fixes
 * name_assign_type support from Tom Gundersen

71 files changed, 759 insertions, 406 deletions

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index b979c265fc51..675b082283d6 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2900,6 +2900,8 @@ static int bond_slave_netdev_event(unsigned long event,
 			if (old_duplex != slave->duplex)
 				bond_3ad_adapter_duplex_changed(slave);
 		}
+		/* Fallthrough */
+	case NETDEV_DOWN:
 		/* Refresh slave-array if applicable!
 		 * If the setup does not use miimon or arpmon (mode-specific!),
 		 * then these events will not cause the slave-array to be
@@ -2911,10 +2913,6 @@ static int bond_slave_netdev_event(unsigned long event,
 		if (bond_mode_uses_xmit_hash(bond))
 			bond_update_slave_arr(bond, NULL);
 		break;
-	case NETDEV_DOWN:
-		if (bond_mode_uses_xmit_hash(bond))
-			bond_update_slave_arr(bond, NULL);
-		break;
 	case NETDEV_CHANGEMTU:
 		/* TODO: Should slaves be allowed to
 		 * independently alter their MTU?  For
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index aa33d16f2e22..9808c860a797 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -51,8 +51,11 @@ static int mv88e6171_switch_reset(struct dsa_switch *ds)
 	/* Wait for transmit queues to drain. */
 	usleep_range(2000, 4000);
 
-	/* Reset the switch. */
-	REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
+	/* Reset the switch. Keep PPU active.  The PPU needs to be
+	 * active to support indirect phy register accesses through
+	 * global registers 0x18 and 0x19.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
 
 	/* Wait up to one second for reset to complete. */
 	timeout = jiffies + 1 * HZ;
@@ -83,11 +86,10 @@ static int mv88e6171_setup_global(struct dsa_switch *ds)
 	int ret;
 	int i;
 
-	/* Disable the PHY polling unit (since there won't be any
-	 * external PHYs to poll), don't discard packets with
-	 * excessive collisions, and mask all interrupt sources.
+	/* Discard packets with excessive collisions, mask all
+	 * interrupt sources, enable PPU.
 	 */
-	REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
+	REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
 
 	/* Set the default address aging time to 5 minutes, and
 	 * enable address learn messages to be sent to all message
@@ -336,7 +338,7 @@ mv88e6171_phy_read(struct dsa_switch *ds, int port, int regnum)
 	int ret;
 
 	mutex_lock(&ps->phy_mutex);
-	ret = mv88e6xxx_phy_read(ds, addr, regnum);
+	ret = mv88e6xxx_phy_read_indirect(ds, addr, regnum);
 	mutex_unlock(&ps->phy_mutex);
 	return ret;
 }
@@ -350,7 +352,7 @@ mv88e6171_phy_write(struct dsa_switch *ds,
 	int ret;
 
 	mutex_lock(&ps->phy_mutex);
-	ret = mv88e6xxx_phy_write(ds, addr, regnum, val);
+	ret = mv88e6xxx_phy_write_indirect(ds, addr, regnum, val);
 	mutex_unlock(&ps->phy_mutex);
 	return ret;
 }
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index e13adc7b3dda..1ebd8f96072a 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -22,59 +22,6 @@
 #include <net/dsa.h>
 #include "mv88e6xxx.h"
 
-static int mv88e6352_wait(struct dsa_switch *ds, int reg, int offset, u16 mask)
-{
-	unsigned long timeout = jiffies + HZ / 10;
-
-	while (time_before(jiffies, timeout)) {
-		int ret;
-
-		ret = REG_READ(reg, offset);
-		if (!(ret & mask))
-			return 0;
-
-		usleep_range(1000, 2000);
-	}
-	return -ETIMEDOUT;
-}
-
-static inline int mv88e6352_phy_wait(struct dsa_switch *ds)
-{
-	return mv88e6352_wait(ds, REG_GLOBAL2, 0x18, 0x8000);
-}
-
-static inline int mv88e6352_eeprom_load_wait(struct dsa_switch *ds)
-{
-	return mv88e6352_wait(ds, REG_GLOBAL2, 0x14, 0x0800);
-}
-
-static inline int mv88e6352_eeprom_busy_wait(struct dsa_switch *ds)
-{
-	return mv88e6352_wait(ds, REG_GLOBAL2, 0x14, 0x8000);
-}
-
-static int __mv88e6352_phy_read(struct dsa_switch *ds, int addr, int regnum)
-{
-	int ret;
-
-	REG_WRITE(REG_GLOBAL2, 0x18, 0x9800 | (addr << 5) | regnum);
-
-	ret = mv88e6352_phy_wait(ds);
-	if (ret < 0)
-		return ret;
-
-	return REG_READ(REG_GLOBAL2, 0x19);
-}
-
-static int __mv88e6352_phy_write(struct dsa_switch *ds, int addr, int regnum,
-				 u16 val)
-{
-	REG_WRITE(REG_GLOBAL2, 0x19, val);
-	REG_WRITE(REG_GLOBAL2, 0x18, 0x9400 | (addr << 5) | regnum);
-
-	return mv88e6352_phy_wait(ds);
-}
-
 static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
 {
 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
@@ -346,12 +293,12 @@ static int mv88e6352_phy_page_read(struct dsa_switch *ds,
 	int ret;
 
 	mutex_lock(&ps->phy_mutex);
-	ret = __mv88e6352_phy_write(ds, port, 0x16, page);
+	ret = mv88e6xxx_phy_write_indirect(ds, port, 0x16, page);
 	if (ret < 0)
 		goto error;
-	ret = __mv88e6352_phy_read(ds, port, reg);
+	ret = mv88e6xxx_phy_read_indirect(ds, port, reg);
 error:
-	__mv88e6352_phy_write(ds, port, 0x16, 0x0);
+	mv88e6xxx_phy_write_indirect(ds, port, 0x16, 0x0);
 	mutex_unlock(&ps->phy_mutex);
 	return ret;
 }
@@ -363,13 +310,13 @@ static int mv88e6352_phy_page_write(struct dsa_switch *ds,
 	int ret;
 
 	mutex_lock(&ps->phy_mutex);
-	ret = __mv88e6352_phy_write(ds, port, 0x16, page);
+	ret = mv88e6xxx_phy_write_indirect(ds, port, 0x16, page);
 	if (ret < 0)
 		goto error;
 
-	ret = __mv88e6352_phy_write(ds, port, reg, val);
+	ret = mv88e6xxx_phy_write_indirect(ds, port, reg, val);
 error:
-	__mv88e6352_phy_write(ds, port, 0x16, 0x0);
+	mv88e6xxx_phy_write_indirect(ds, port, 0x16, 0x0);
 	mutex_unlock(&ps->phy_mutex);
 	return ret;
 }
@@ -482,7 +429,7 @@ mv88e6352_phy_read(struct dsa_switch *ds, int port, int regnum)
 		return addr;
 
 	mutex_lock(&ps->phy_mutex);
-	ret = __mv88e6352_phy_read(ds, addr, regnum);
+	ret = mv88e6xxx_phy_read_indirect(ds, addr, regnum);
 	mutex_unlock(&ps->phy_mutex);
 
 	return ret;
@@ -499,7 +446,7 @@ mv88e6352_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
 		return addr;
 
 	mutex_lock(&ps->phy_mutex);
-	ret = __mv88e6352_phy_write(ds, addr, regnum, val);
+	ret = mv88e6xxx_phy_write_indirect(ds, addr, regnum, val);
 	mutex_unlock(&ps->phy_mutex);
 
 	return ret;
@@ -553,7 +500,7 @@ static int mv88e6352_read_eeprom_word(struct dsa_switch *ds, int addr)
 	if (ret < 0)
 		goto error;
 
-	ret = mv88e6352_eeprom_busy_wait(ds);
+	ret = mv88e6xxx_eeprom_busy_wait(ds);
 	if (ret < 0)
 		goto error;
 
@@ -576,7 +523,7 @@ static int mv88e6352_get_eeprom(struct dsa_switch *ds,
 
 	eeprom->magic = 0xc3ec4951;
 
-	ret = mv88e6352_eeprom_load_wait(ds);
+	ret = mv88e6xxx_eeprom_load_wait(ds);
 	if (ret < 0)
 		return ret;
 
@@ -657,7 +604,7 @@ static int mv88e6352_write_eeprom_word(struct dsa_switch *ds, int addr,
 	if (ret < 0)
 		goto error;
 
-	ret = mv88e6352_eeprom_busy_wait(ds);
+	ret = mv88e6xxx_eeprom_busy_wait(ds);
 error:
 	mutex_unlock(&ps->eeprom_mutex);
 	return ret;
@@ -681,7 +628,7 @@ static int mv88e6352_set_eeprom(struct dsa_switch *ds,
 	len = eeprom->len;
 	eeprom->len = 0;
 
-	ret = mv88e6352_eeprom_load_wait(ds);
+	ret = mv88e6xxx_eeprom_load_wait(ds);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 3e7e31a6abb7..a83ace0803e7 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -596,6 +596,59 @@ error:
 }
 #endif /* CONFIG_NET_DSA_HWMON */
 
+static int mv88e6xxx_wait(struct dsa_switch *ds, int reg, int offset, u16 mask)
+{
+	unsigned long timeout = jiffies + HZ / 10;
+
+	while (time_before(jiffies, timeout)) {
+		int ret;
+
+		ret = REG_READ(reg, offset);
+		if (!(ret & mask))
+			return 0;
+
+		usleep_range(1000, 2000);
+	}
+	return -ETIMEDOUT;
+}
+
+int mv88e6xxx_phy_wait(struct dsa_switch *ds)
+{
+	return mv88e6xxx_wait(ds, REG_GLOBAL2, 0x18, 0x8000);
+}
+
+int mv88e6xxx_eeprom_load_wait(struct dsa_switch *ds)
+{
+	return mv88e6xxx_wait(ds, REG_GLOBAL2, 0x14, 0x0800);
+}
+
+int mv88e6xxx_eeprom_busy_wait(struct dsa_switch *ds)
+{
+	return mv88e6xxx_wait(ds, REG_GLOBAL2, 0x14, 0x8000);
+}
+
+int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int addr, int regnum)
+{
+	int ret;
+
+	REG_WRITE(REG_GLOBAL2, 0x18, 0x9800 | (addr << 5) | regnum);
+
+	ret = mv88e6xxx_phy_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	return REG_READ(REG_GLOBAL2, 0x19);
+}
+
+int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr, int regnum,
+				 u16 val)
+{
+	REG_WRITE(REG_GLOBAL2, 0x19, val);
+	REG_WRITE(REG_GLOBAL2, 0x18, 0x9400 | (addr << 5) | regnum);
+
+	return mv88e6xxx_phy_wait(ds);
+}
+
 static int __init mv88e6xxx_init(void)
 {
 #if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 03e397efde36..72942271bb67 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -82,6 +82,12 @@ int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port);
 void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
 			struct ethtool_regs *regs, void *_p);
 int  mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp);
+int mv88e6xxx_phy_wait(struct dsa_switch *ds);
+int mv88e6xxx_eeprom_load_wait(struct dsa_switch *ds);
+int mv88e6xxx_eeprom_busy_wait(struct dsa_switch *ds);
+int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int addr, int regnum);
+int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr, int regnum,
+				 u16 val);
 
 extern struct dsa_switch_driver mv88e6131_switch_driver;
 extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 760c72c6e2ac..a1ee261bff5c 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -105,11 +105,11 @@ static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 
 	/* set MDIO address */
 	csrwr32((mii_id & 0x1f), priv->mac_dev,
-		tse_csroffs(mdio_phy0_addr));
+		tse_csroffs(mdio_phy1_addr));
 
 	/* get the data */
 	return csrrd32(priv->mac_dev,
-		       tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff;
+		       tse_csroffs(mdio_phy1) + regnum * 4) & 0xffff;
 }
 
 static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
@@ -120,10 +120,10 @@ static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 
 	/* set MDIO address */
 	csrwr32((mii_id & 0x1f), priv->mac_dev,
-		tse_csroffs(mdio_phy0_addr));
+		tse_csroffs(mdio_phy1_addr));
 
 	/* write the data */
-	csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4);
+	csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy1) + regnum * 4);
 	return 0;
 }
 
@@ -1099,8 +1099,12 @@ static int tse_open(struct net_device *dev)
 
 	spin_lock(&priv->mac_cfg_lock);
 	ret = reset_mac(priv);
+	/* Note that reset_mac will fail if the clocks are gated by the PHY
+	 * due to the PHY being put into isolation or power down mode.
+	 * This is not an error if reset fails due to no clock.
+	 */
 	if (ret)
-		netdev_err(dev, "Cannot reset MAC core (error: %d)\n", ret);
+		netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret);
 
 	ret = init_mac(priv);
 	spin_unlock(&priv->mac_cfg_lock);
@@ -1204,8 +1208,12 @@ static int tse_shutdown(struct net_device *dev)
 	spin_lock(&priv->tx_lock);
 
 	ret = reset_mac(priv);
+	/* Note that reset_mac will fail if the clocks are gated by the PHY
+	 * due to the PHY being put into isolation or power down mode.
+	 * This is not an error if reset fails due to no clock.
+	 */
 	if (ret)
-		netdev_err(dev, "Cannot reset MAC core (error: %d)\n", ret);
+		netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret);
 	priv->dmaops->reset_dma(priv);
 	free_skbufs(dev);
 
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 41a3c9804427..ee4fdfe65e9e 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -71,12 +71,12 @@ config BCMGENET
 	  Broadcom BCM7xxx Set Top Box family chipset.
 
 config BNX2
-	tristate "QLogic NetXtremeII support"
+	tristate "QLogic bnx2 support"
 	depends on PCI
 	select CRC32
 	select FW_LOADER
 	---help---
-	  This driver supports QLogic NetXtremeII gigabit Ethernet cards.
+	  This driver supports QLogic bnx2 gigabit Ethernet cards.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called bnx2.  This is recommended.
@@ -87,8 +87,8 @@ config CNIC
 	select BNX2
 	select UIO
 	---help---
-	  This driver supports offload features of QLogic NetXtremeII
-	  gigabit Ethernet cards.
+	  This driver supports offload features of QLogic bnx2 gigabit
+	  Ethernet cards.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called cnic.  This is recommended.
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 02bf0b86995b..9f146b990c01 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -1,7 +1,7 @@
-/* bnx2.c: QLogic NX2 network driver.
+/* bnx2.c: QLogic bnx2 network driver.
  *
  * Copyright (c) 2004-2014 Broadcom Corporation
- * Copyright (c) 2014 QLogic Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -58,8 +58,8 @@
 #include "bnx2_fw.h"
 
 #define DRV_MODULE_NAME		"bnx2"
-#define DRV_MODULE_VERSION	"2.2.5"
-#define DRV_MODULE_RELDATE	"December 20, 2013"
+#define DRV_MODULE_VERSION	"2.2.6"
+#define DRV_MODULE_RELDATE	"January 29, 2014"
 #define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-6.2.3.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-6.0.15.fw"
 #define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-6.2.1b.fw"
@@ -72,10 +72,10 @@
 #define TX_TIMEOUT  (5*HZ)
 
 static char version[] =
-	"QLogic NetXtreme II Gigabit Ethernet Driver " DRV_MODULE_NAME " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+	"QLogic " DRV_MODULE_NAME " Gigabit Ethernet Driver v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Michael Chan <mchan@broadcom.com>");
-MODULE_DESCRIPTION("QLogic NetXtreme II BCM5706/5708/5709/5716 Driver");
+MODULE_DESCRIPTION("QLogic BCM5706/5708/5709/5716 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 MODULE_FIRMWARE(FW_MIPS_FILE_06);
@@ -4984,8 +4984,6 @@ bnx2_init_chip(struct bnx2 *bp)
 
 	bp->idle_chk_status_idx = 0xffff;
 
-	bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE;
-
 	/* Set up how to generate a link change interrupt. */
 	BNX2_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK);
 
diff --git a/drivers/net/ethernet/broadcom/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h
index 28df35d35893..f92f76c44756 100644
--- a/drivers/net/ethernet/broadcom/bnx2.h
+++ b/drivers/net/ethernet/broadcom/bnx2.h
@@ -1,7 +1,7 @@
-/* bnx2.h: QLogic NX2 network driver.
+/* bnx2.h: QLogic bnx2 network driver.
  *
  * Copyright (c) 2004-2014 Broadcom Corporation
- * Copyright (c) 2014 QLogic Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2_fw.h b/drivers/net/ethernet/broadcom/bnx2_fw.h
index 7db79c28b5ff..b0f2ccadaffd 100644
--- a/drivers/net/ethernet/broadcom/bnx2_fw.h
+++ b/drivers/net/ethernet/broadcom/bnx2_fw.h
@@ -1,7 +1,7 @@
-/* bnx2_fw.h: QLogic NX2 network driver.
+/* bnx2_fw.h: QLogic bnx2 network driver.
  *
  * Copyright (c) 2004, 2005, 2006, 2007 Broadcom Corporation
- * Copyright (c) 2014 QLogic Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index f05fab65d78a..17c145fdf3ff 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -1,7 +1,7 @@
 /* cnic.c: QLogic CNIC core network driver.
  *
  * Copyright (c) 2006-2014 Broadcom Corporation
- * Copyright (c) 2014 QLogic Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -58,11 +58,11 @@
 #define CNIC_MODULE_NAME	"cnic"
 
 static char version[] =
-	"QLogic NetXtreme II CNIC Driver " CNIC_MODULE_NAME " v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
+	"QLogic " CNIC_MODULE_NAME "Driver v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Michael Chan <mchan@broadcom.com> and John(Zongxi) "
 	      "Chen (zongxi@broadcom.com");
-MODULE_DESCRIPTION("QLogic NetXtreme II CNIC Driver");
+MODULE_DESCRIPTION("QLogic cnic Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(CNIC_MODULE_VERSION);
 
diff --git a/drivers/net/ethernet/broadcom/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h
index 8bb36c1c4d68..ef6125b0ee3e 100644
--- a/drivers/net/ethernet/broadcom/cnic_if.h
+++ b/drivers/net/ethernet/broadcom/cnic_if.h
@@ -1,7 +1,7 @@
-/* cnic_if.h: QLogic CNIC core network driver.
+/* cnic_if.h: QLogic cnic core network driver.
  *
  * Copyright (c) 2006-2014 Broadcom Corporation
- * Copyright (c) 2014 QLogic Corporation
+ * Copyright (c) 2014-2015 QLogic Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,8 +15,8 @@
 
 #include "bnx2x/bnx2x_mfw_req.h"
 
-#define CNIC_MODULE_VERSION	"2.5.20"
-#define CNIC_MODULE_RELDATE	"March 14, 2014"
+#define CNIC_MODULE_VERSION	"2.5.21"
+#define CNIC_MODULE_RELDATE	"January 29, 2015"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1
diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig
index 264155778857..4e8c0b6c57d0 100644
--- a/drivers/net/ethernet/brocade/Kconfig
+++ b/drivers/net/ethernet/brocade/Kconfig
@@ -1,9 +1,9 @@
 #
-# Brocade device configuration
+# QLogic BR-series device configuration
 #
 
 config NET_VENDOR_BROCADE
-	bool "Brocade devices"
+	bool "QLogic BR-series devices"
 	default y
 	depends on PCI
 	---help---
@@ -13,8 +13,8 @@ config NET_VENDOR_BROCADE
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Brocade cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
+	  the questions about QLogic BR-series cards. If you say Y, you will be
+	  asked for your specific card in the following questions.
 
 if NET_VENDOR_BROCADE
 
diff --git a/drivers/net/ethernet/brocade/Makefile b/drivers/net/ethernet/brocade/Makefile
index b58238d2df6a..fec10f9b4558 100644
--- a/drivers/net/ethernet/brocade/Makefile
+++ b/drivers/net/ethernet/brocade/Makefile
@@ -1,5 +1,5 @@
 #
-# Makefile for the Brocade device drivers.
+# Makefile for the QLogic BR-series device drivers.
 #
 
 obj-$(CONFIG_BNA) += bna/
diff --git a/drivers/net/ethernet/brocade/bna/Kconfig b/drivers/net/ethernet/brocade/bna/Kconfig
index dc2eb526fbf7..fe01279a8843 100644
--- a/drivers/net/ethernet/brocade/bna/Kconfig
+++ b/drivers/net/ethernet/brocade/bna/Kconfig
@@ -1,17 +1,17 @@
 #
-# Brocade network device configuration
+# QLogic BR-series network device configuration
 #
 
 config BNA
-	tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
+	tristate "QLogic BR-series 1010/1020/1860 10Gb Ethernet Driver support"
 	depends on PCI
 	---help---
-	  This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
-	  cards.
+	  This driver supports QLogic BR-series 1010/1020/1860 10Gb CEE capable
+	  Ethernet cards.
 	  To compile this driver as a module, choose M here: the module
 	  will be called bna.
 
-	  For general information and support, go to the Brocade support
+	  For general information and support, go to the QLogic support
 	  website at:
 
-	  <http://support.brocade.com>
+	  <http://support.qlogic.com>
diff --git a/drivers/net/ethernet/brocade/bna/Makefile b/drivers/net/ethernet/brocade/bna/Makefile
index 6027302ae73a..6e10b99733a2 100644
--- a/drivers/net/ethernet/brocade/bna/Makefile
+++ b/drivers/net/ethernet/brocade/bna/Makefile
@@ -1,5 +1,6 @@
 #
-# Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+# Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+# Copyright (c) 2014-2015 QLogic Corporation.
 # All rights reserved.
 #
 
diff --git a/drivers/net/ethernet/brocade/bna/bfa_cee.c b/drivers/net/ethernet/brocade/bna/bfa_cee.c
index 550d2521ba76..cf9f3956f198 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_cee.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_cee.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #include "bfa_cee.h"
diff --git a/drivers/net/ethernet/brocade/bna/bfa_cee.h b/drivers/net/ethernet/brocade/bna/bfa_cee.h
index 93fde633d6f3..d04eef5d5a77 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_cee.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_cee.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #ifndef __BFA_CEE_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfa_cs.h b/drivers/net/ethernet/brocade/bna/bfa_cs.h
index ad004a4c3897..af25d8e8fae0 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_cs.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_cs.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 /* BFA common services */
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs.h b/drivers/net/ethernet/brocade/bna/bfa_defs.h
index b7d8127c198f..3bfd9da92630 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #ifndef __BFA_DEFS_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
index b39c5f23974b..63e300f5ba41 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BFA_DEFS_CNA_H__
 #define __BFA_DEFS_CNA_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
index 7fb396fe679d..7a45cd0b594d 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BFA_DEFS_MFG_COMM_H__
 #define __BFA_DEFS_MFG_COMM_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs_status.h b/drivers/net/ethernet/brocade/bna/bfa_defs_status.h
index ea9af9ae754d..a43b56002752 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_defs_status.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_defs_status.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BFA_DEFS_STATUS_H__
 #define __BFA_DEFS_STATUS_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 354ae9792bad..f2d13238b02e 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #include "bfa_ioc.h"
@@ -2763,7 +2764,7 @@ bfa_nw_ioc_notify_register(struct bfa_ioc *ioc,
 	list_add_tail(&notify->qe, &ioc->notify_q);
 }
 
-#define BFA_MFG_NAME "Brocade"
+#define BFA_MFG_NAME "QLogic"
 static void
 bfa_ioc_get_adapter_attr(struct bfa_ioc *ioc,
 			 struct bfa_adapter_attr *ad_attr)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.h b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
index 20cff7df4b55..effb7156e7a4 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #ifndef __BFA_IOC_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
index d639558455cb..66c8507d7717 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #include "bfa_ioc.h"
diff --git a/drivers/net/ethernet/brocade/bna/bfa_msgq.c b/drivers/net/ethernet/brocade/bna/bfa_msgq.c
index 55067d0d25cf..c07d5b9372f4 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_msgq.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_msgq.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 /* MSGQ module source file. */
diff --git a/drivers/net/ethernet/brocade/bna/bfa_msgq.h b/drivers/net/ethernet/brocade/bna/bfa_msgq.h
index a6a565a366dc..66bc8b5acd57 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_msgq.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_msgq.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #ifndef __BFA_MSGQ_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfi.h b/drivers/net/ethernet/brocade/bna/bfi.h
index 8c563a77cdf6..f1e1129e6241 100644
--- a/drivers/net/ethernet/brocade/bna/bfi.h
+++ b/drivers/net/ethernet/brocade/bna/bfi.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BFI_H__
 #define __BFI_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfi_cna.h b/drivers/net/ethernet/brocade/bna/bfi_cna.h
index 6704a4392973..bd605bee72ee 100644
--- a/drivers/net/ethernet/brocade/bna/bfi_cna.h
+++ b/drivers/net/ethernet/brocade/bna/bfi_cna.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BFI_CNA_H__
 #define __BFI_CNA_H__
diff --git a/drivers/net/ethernet/brocade/bna/bfi_enet.h b/drivers/net/ethernet/brocade/bna/bfi_enet.h
index ae072dc5d238..bccca3bbadb8 100644
--- a/drivers/net/ethernet/brocade/bna/bfi_enet.h
+++ b/drivers/net/ethernet/brocade/bna/bfi_enet.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 /* BNA Hardware and Firmware Interface */
diff --git a/drivers/net/ethernet/brocade/bna/bfi_reg.h b/drivers/net/ethernet/brocade/bna/bfi_reg.h
index c49fa312ddbd..2835b51eabec 100644
--- a/drivers/net/ethernet/brocade/bna/bfi_reg.h
+++ b/drivers/net/ethernet/brocade/bna/bfi_reg.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,13 +11,14 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 /*
- * bfi_reg.h ASIC register defines for all Brocade adapter ASICs
+ * bfi_reg.h ASIC register defines for all QLogic BR-series adapter ASICs
  */
 
 #ifndef __BFI_REG_H__
@@ -221,7 +222,7 @@ enum {
 #define __PMM_1T_RESET_P		0x00000001
 #define PMM_1T_RESET_REG_P1		0x00023c1c
 
-/* Brocade 1860 Adapter specific defines */
+/* QLogic BR-series 1860 Adapter specific defines */
 #define CT2_PCI_CPQ_BASE		0x00030000
 #define CT2_PCI_APP_BASE		0x00030100
 #define CT2_PCI_ETH_BASE		0x00030400
@@ -264,7 +265,7 @@ enum {
 #define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR	(CT2_PCI_APP_BASE + 0x38)
 
 /*
- * Brocade 1860 adapter CPQ block registers
+ * QLogic BR-series 1860 adapter CPQ block registers
  */
 #define CT2_HOSTFN_LPU0_MBOX0		(CT2_PCI_CPQ_BASE + 0x00)
 #define CT2_HOSTFN_LPU1_MBOX0		(CT2_PCI_CPQ_BASE + 0x20)
diff --git a/drivers/net/ethernet/brocade/bna/bna.h b/drivers/net/ethernet/brocade/bna/bna.h
index 1f512190d696..8ba72b1f36d9 100644
--- a/drivers/net/ethernet/brocade/bna/bna.h
+++ b/drivers/net/ethernet/brocade/bna/bna.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BNA_H__
 #define __BNA_H__
diff --git a/drivers/net/ethernet/brocade/bna/bna_enet.c b/drivers/net/ethernet/brocade/bna/bna_enet.c
index 903466ef41c0..deb8da6ab9cc 100644
--- a/drivers/net/ethernet/brocade/bna/bna_enet.c
+++ b/drivers/net/ethernet/brocade/bna/bna_enet.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #include "bna.h"
 
diff --git a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
index 2702d02e98d9..c5feab130d6d 100644
--- a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
+++ b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 /* File for interrupt macros and functions */
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index 5fac411c52f4..8ab3a5f62706 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
   */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #include "bna.h"
 #include "bfi.h"
diff --git a/drivers/net/ethernet/brocade/bna/bna_types.h b/drivers/net/ethernet/brocade/bna/bna_types.h
index 621547cd3504..d0a7a566f5d6 100644
--- a/drivers/net/ethernet/brocade/bna/bna_types.h
+++ b/drivers/net/ethernet/brocade/bna/bna_types.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BNA_TYPES_H__
 #define __BNA_TYPES_H__
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 7714d7790089..37072a83f9d6 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #include <linux/bitops.h>
 #include <linux/netdevice.h>
@@ -3867,7 +3868,7 @@ bnad_module_init(void)
 {
 	int err;
 
-	pr_info("Brocade 10G Ethernet driver - version: %s\n",
+	pr_info("QLogic BR-series 10G Ethernet driver - version: %s\n",
 			BNAD_VERSION);
 
 	bfa_nw_ioc_auto_recover(bnad_ioc_auto_recover);
@@ -3894,7 +3895,7 @@ module_exit(bnad_module_exit);
 
 MODULE_AUTHOR("Brocade");
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Brocade 10G PCIe Ethernet driver");
+MODULE_DESCRIPTION("QLogic BR-series 10G PCIe Ethernet driver");
 MODULE_VERSION(BNAD_VERSION);
 MODULE_FIRMWARE(CNA_FW_FILE_CT);
 MODULE_FIRMWARE(CNA_FW_FILE_CT2);
diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h
index 2842c188e0da..7ead6c23edb6 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.h
+++ b/drivers/net/ethernet/brocade/bna/bnad.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #ifndef __BNAD_H__
 #define __BNAD_H__
@@ -71,7 +72,7 @@ struct bnad_rx_ctrl {
 #define BNAD_NAME			"bna"
 #define BNAD_NAME_LEN			64
 
-#define BNAD_VERSION			"3.2.23.0"
+#define BNAD_VERSION			"3.2.25.1"
 
 #define BNAD_MAILBOX_MSIX_INDEX		0
 #define BNAD_MAILBOX_MSIX_VECTORS	1
diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
index 619083a860a4..72c89550417c 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #include <linux/debugfs.h>
diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
index d26adac6ab99..12f344debd1c 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #include "cna.h"
diff --git a/drivers/net/ethernet/brocade/bna/cna.h b/drivers/net/ethernet/brocade/bna/cna.h
index b3ff6d507951..28e7d0ffeab1 100644
--- a/drivers/net/ethernet/brocade/bna/cna.h
+++ b/drivers/net/ethernet/brocade/bna/cna.h
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2006-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2006-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 
 #ifndef __CNA_H__
@@ -37,8 +38,8 @@
 
 extern char bfa_version[];
 
-#define CNA_FW_FILE_CT	"ctfw-3.2.3.0.bin"
-#define CNA_FW_FILE_CT2	"ct2fw-3.2.3.0.bin"
+#define CNA_FW_FILE_CT	"ctfw-3.2.5.1.bin"
+#define CNA_FW_FILE_CT2	"ct2fw-3.2.5.1.bin"
 #define FC_SYMNAME_MAX	256	/*!< max name server symbolic name size */
 
 #pragma pack(1)
diff --git a/drivers/net/ethernet/brocade/bna/cna_fwimg.c b/drivers/net/ethernet/brocade/bna/cna_fwimg.c
index 6f72771caea6..ebf462d8082f 100644
--- a/drivers/net/ethernet/brocade/bna/cna_fwimg.c
+++ b/drivers/net/ethernet/brocade/bna/cna_fwimg.c
@@ -1,5 +1,5 @@
 /*
- * Linux network driver for Brocade Converged Network Adapter.
+ * Linux network driver for QLogic BR-series Converged Network Adapter.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License (GPL) Version 2 as
@@ -11,9 +11,10 @@
  * General Public License for more details.
  */
 /*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014-2015 QLogic Corporation
  * All rights reserved
- * www.brocade.com
+ * www.qlogic.com
  */
 #include <linux/firmware.h>
 #include "bnad.h"
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index ad76b8e35a00..05fb36da0cff 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -449,7 +449,7 @@ static void macb_update_stats(struct macb *bp)
 	WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4);
 
 	for(; p < end; p++, reg++)
-		*p += __raw_readl(reg);
+		*p += readl_relaxed(reg);
 }
 
 static int macb_halt_tx(struct macb *bp)
@@ -1585,7 +1585,11 @@ static void macb_configure_dma(struct macb *bp)
 		if (bp->dma_burst_length)
 			dmacfg = GEM_BFINS(FBLDO, bp->dma_burst_length, dmacfg);
 		dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L);
-		dmacfg &= ~GEM_BIT(ENDIA);
+		dmacfg &= ~GEM_BIT(ENDIA_PKT);
+		/* Tell the chip to byteswap descriptors on big-endian hosts */
+#ifdef __BIG_ENDIAN
+		dmacfg |= GEM_BIT(ENDIA_DESC);
+#endif
 		if (bp->dev->features & NETIF_F_HW_CSUM)
 			dmacfg |= GEM_BIT(TXCOEN);
 		else
@@ -1832,14 +1836,14 @@ static void gem_update_stats(struct macb *bp)
 
 	for (i = 0; i < GEM_STATS_LEN; ++i, ++p) {
 		u32 offset = gem_statistics[i].offset;
-		u64 val = __raw_readl(bp->regs + offset);
+		u64 val = readl_relaxed(bp->regs + offset);
 
 		bp->ethtool_stats[i] += val;
 		*p += val;
 
 		if (offset == GEM_OCTTXL || offset == GEM_OCTRXL) {
 			/* Add GEM_OCTTXH, GEM_OCTRXH */
-			val = __raw_readl(bp->regs + offset + 4);
+			val = readl_relaxed(bp->regs + offset + 4);
 			bp->ethtool_stats[i] += ((u64)val) << 32;
 			*(++p) += val;
 		}
@@ -2191,12 +2195,14 @@ static void macb_probe_queues(void __iomem *mem,
 	*num_queues = 1;
 
 	/* is it macb or gem ? */
-	mid = __raw_readl(mem + MACB_MID);
+	mid = readl_relaxed(mem + MACB_MID);
+
 	if (MACB_BFEXT(IDNUM, mid) != 0x2)
 		return;
 
 	/* bit 0 is never set but queue 0 always exists */
-	*queue_mask = __raw_readl(mem + GEM_DCFG6) & 0xff;
+	*queue_mask = readl_relaxed(mem + GEM_DCFG6) & 0xff;
+
 	*queue_mask |= 0x1;
 
 	for (hw_q = 1; hw_q < MACB_MAX_QUEUES; ++hw_q)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 31dc080f2437..57f0a1a7415d 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -229,7 +229,8 @@
 /* Bitfields in DMACFG. */
 #define GEM_FBLDO_OFFSET	0 /* fixed burst length for DMA */
 #define GEM_FBLDO_SIZE		5
-#define GEM_ENDIA_OFFSET	7 /* endian swap mode for packet data access */
+#define GEM_ENDIA_DESC_OFFSET	6 /* endian swap mode for management descriptor access */
+#define GEM_ENDIA_PKT_OFFSET	7 /* endian swap mode for packet data access */
 #define GEM_ENDIA_SIZE		1
 #define GEM_RXBMS_OFFSET	8 /* RX packet buffer memory size select */
 #define GEM_RXBMS_SIZE		2
@@ -423,17 +424,17 @@
 
 /* Register access macros */
 #define macb_readl(port,reg)				\
-	__raw_readl((port)->regs + MACB_##reg)
+	readl_relaxed((port)->regs + MACB_##reg)
 #define macb_writel(port,reg,value)			\
-	__raw_writel((value), (port)->regs + MACB_##reg)
+	writel_relaxed((value), (port)->regs + MACB_##reg)
 #define gem_readl(port, reg)				\
-	__raw_readl((port)->regs + GEM_##reg)
+	readl_relaxed((port)->regs + GEM_##reg)
 #define gem_writel(port, reg, value)			\
-	__raw_writel((value), (port)->regs + GEM_##reg)
+	writel_relaxed((value), (port)->regs + GEM_##reg)
 #define queue_readl(queue, reg)				\
-	__raw_readl((queue)->bp->regs + (queue)->reg)
+	readl_relaxed((queue)->bp->regs + (queue)->reg)
 #define queue_writel(queue, reg, value)			\
-	__raw_writel((value), (queue)->bp->regs + (queue)->reg)
+	writel_relaxed((value), (queue)->bp->regs + (queue)->reg)
 
 /* Conditional GEM/MACB macros.  These perform the operation to the correct
  * register dependent on whether the device is a GEM or a MACB.  For registers
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 27de37aa90af..ad33bf1f1df1 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -238,10 +238,17 @@ struct be_tx_stats {
 	struct u64_stats_sync sync_compl;
 };
 
+/* Structure to hold some data of interest obtained from a TX CQE */
+struct be_tx_compl_info {
+	u8 status;		/* Completion status */
+	u16 end_index;		/* Completed TXQ Index */
+};
+
 struct be_tx_obj {
 	u32 db_offset;
 	struct be_queue_info q;
 	struct be_queue_info cq;
+	struct be_tx_compl_info txcp;
 	/* Remember the skbs that were transmitted */
 	struct sk_buff *sent_skb_list[TX_Q_LEN];
 	struct be_tx_stats stats;
@@ -417,6 +424,39 @@ struct rss_info {
 	u8 rss_hkey[RSS_HASH_KEY_LEN];
 };
 
+/* Macros to read/write the 'features' word of be_wrb_params structure.
+ */
+#define	BE_WRB_F_BIT(name)			BE_WRB_F_##name##_BIT
+#define	BE_WRB_F_MASK(name)			BIT_MASK(BE_WRB_F_##name##_BIT)
+
+#define	BE_WRB_F_GET(word, name)	\
+	(((word) & (BE_WRB_F_MASK(name))) >> BE_WRB_F_BIT(name))
+
+#define	BE_WRB_F_SET(word, name, val)	\
+	((word) |= (((val) << BE_WRB_F_BIT(name)) & BE_WRB_F_MASK(name)))
+
+/* Feature/offload bits */
+enum {
+	BE_WRB_F_CRC_BIT,		/* Ethernet CRC */
+	BE_WRB_F_IPCS_BIT,		/* IP csum */
+	BE_WRB_F_TCPCS_BIT,		/* TCP csum */
+	BE_WRB_F_UDPCS_BIT,		/* UDP csum */
+	BE_WRB_F_LSO_BIT,		/* LSO */
+	BE_WRB_F_LSO6_BIT,		/* LSO6 */
+	BE_WRB_F_VLAN_BIT,		/* VLAN */
+	BE_WRB_F_VLAN_SKIP_HW_BIT	/* Skip VLAN tag (workaround) */
+};
+
+/* The structure below provides a HW-agnostic abstraction of WRB params
+ * retrieved from a TX skb. This is in turn passed to chip specific routines
+ * during transmit, to set the corresponding params in the WRB.
+ */
+struct be_wrb_params {
+	u32 features;	/* Feature bits */
+	u16 vlan_tag;	/* VLAN tag */
+	u16 lso_mss;	/* MSS for LSO */
+};
+
 struct be_adapter {
 	struct pci_dev *pdev;
 	struct net_device *netdev;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 0a816859aca5..c1553fba7916 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -727,48 +727,86 @@ static u16 skb_ip_proto(struct sk_buff *skb)
 		ip_hdr(skb)->protocol : ipv6_hdr(skb)->nexthdr;
 }
 
-static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr,
-			 struct sk_buff *skb, u32 wrb_cnt, u32 len,
-			 bool skip_hw_vlan)
+static inline bool be_is_txq_full(struct be_tx_obj *txo)
 {
-	u16 vlan_tag, proto;
+	return atomic_read(&txo->q.used) + BE_MAX_TX_FRAG_COUNT >= txo->q.len;
+}
 
-	memset(hdr, 0, sizeof(*hdr));
+static inline bool be_can_txq_wake(struct be_tx_obj *txo)
+{
+	return atomic_read(&txo->q.used) < txo->q.len / 2;
+}
 
-	SET_TX_WRB_HDR_BITS(crc, hdr, 1);
+static inline bool be_is_tx_compl_pending(struct be_tx_obj *txo)
+{
+	return atomic_read(&txo->q.used) > txo->pend_wrb_cnt;
+}
+
+static void be_get_wrb_params_from_skb(struct be_adapter *adapter,
+				       struct sk_buff *skb,
+				       struct be_wrb_params *wrb_params)
+{
+	u16 proto;
 
 	if (skb_is_gso(skb)) {
-		SET_TX_WRB_HDR_BITS(lso, hdr, 1);
-		SET_TX_WRB_HDR_BITS(lso_mss, hdr, skb_shinfo(skb)->gso_size);
+		BE_WRB_F_SET(wrb_params->features, LSO, 1);
+		wrb_params->lso_mss = skb_shinfo(skb)->gso_size;
 		if (skb_is_gso_v6(skb) && !lancer_chip(adapter))
-			SET_TX_WRB_HDR_BITS(lso6, hdr, 1);
+			BE_WRB_F_SET(wrb_params->features, LSO6, 1);
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		if (skb->encapsulation) {
-			SET_TX_WRB_HDR_BITS(ipcs, hdr, 1);
+			BE_WRB_F_SET(wrb_params->features, IPCS, 1);
 			proto = skb_inner_ip_proto(skb);
 		} else {
 			proto = skb_ip_proto(skb);
 		}
 		if (proto == IPPROTO_TCP)
-			SET_TX_WRB_HDR_BITS(tcpcs, hdr, 1);
+			BE_WRB_F_SET(wrb_params->features, TCPCS, 1);
 		else if (proto == IPPROTO_UDP)
-			SET_TX_WRB_HDR_BITS(udpcs, hdr, 1);
+			BE_WRB_F_SET(wrb_params->features, UDPCS, 1);
 	}
 
 	if (skb_vlan_tag_present(skb)) {
-		SET_TX_WRB_HDR_BITS(vlan, hdr, 1);
-		vlan_tag = be_get_tx_vlan_tag(adapter, skb);
-		SET_TX_WRB_HDR_BITS(vlan_tag, hdr, vlan_tag);
+		BE_WRB_F_SET(wrb_params->features, VLAN, 1);
+		wrb_params->vlan_tag = be_get_tx_vlan_tag(adapter, skb);
 	}
 
-	SET_TX_WRB_HDR_BITS(num_wrb, hdr, wrb_cnt);
-	SET_TX_WRB_HDR_BITS(len, hdr, len);
+	BE_WRB_F_SET(wrb_params->features, CRC, 1);
+}
+
+static void wrb_fill_hdr(struct be_adapter *adapter,
+			 struct be_eth_hdr_wrb *hdr,
+			 struct be_wrb_params *wrb_params,
+			 struct sk_buff *skb)
+{
+	memset(hdr, 0, sizeof(*hdr));
 
-	/* Hack to skip HW VLAN tagging needs evt = 1, compl = 0
-	 * When this hack is not needed, the evt bit is set while ringing DB
+	SET_TX_WRB_HDR_BITS(crc, hdr,
+			    BE_WRB_F_GET(wrb_params->features, CRC));
+	SET_TX_WRB_HDR_BITS(ipcs, hdr,
+			    BE_WRB_F_GET(wrb_params->features, IPCS));
+	SET_TX_WRB_HDR_BITS(tcpcs, hdr,
+			    BE_WRB_F_GET(wrb_params->features, TCPCS));
+	SET_TX_WRB_HDR_BITS(udpcs, hdr,
+			    BE_WRB_F_GET(wrb_params->features, UDPCS));
+
+	SET_TX_WRB_HDR_BITS(lso, hdr,
+			    BE_WRB_F_GET(wrb_params->features, LSO));
+	SET_TX_WRB_HDR_BITS(lso6, hdr,
+			    BE_WRB_F_GET(wrb_params->features, LSO6));
+	SET_TX_WRB_HDR_BITS(lso_mss, hdr, wrb_params->lso_mss);
+
+	/* Hack to skip HW VLAN tagging needs evt = 1, compl = 0. When this
+	 * hack is not needed, the evt bit is set while ringing DB.
 	 */
-	if (skip_hw_vlan)
-		SET_TX_WRB_HDR_BITS(event, hdr, 1);
+	SET_TX_WRB_HDR_BITS(event, hdr,
+			    BE_WRB_F_GET(wrb_params->features, VLAN_SKIP_HW));
+	SET_TX_WRB_HDR_BITS(vlan, hdr,
+			    BE_WRB_F_GET(wrb_params->features, VLAN));
+	SET_TX_WRB_HDR_BITS(vlan_tag, hdr, wrb_params->vlan_tag);
+
+	SET_TX_WRB_HDR_BITS(num_wrb, hdr, skb_wrb_cnt(skb));
+	SET_TX_WRB_HDR_BITS(len, hdr, skb->len);
 }
 
 static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb,
@@ -788,77 +826,124 @@ static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb,
 	}
 }
 
-/* Returns the number of WRBs used up by the skb */
+/* Grab a WRB header for xmit */
+static u16 be_tx_get_wrb_hdr(struct be_tx_obj *txo)
+{
+	u16 head = txo->q.head;
+
+	queue_head_inc(&txo->q);
+	return head;
+}
+
+/* Set up the WRB header for xmit */
+static void be_tx_setup_wrb_hdr(struct be_adapter *adapter,
+				struct be_tx_obj *txo,
+				struct be_wrb_params *wrb_params,
+				struct sk_buff *skb, u16 head)
+{
+	u32 num_frags = skb_wrb_cnt(skb);
+	struct be_queue_info *txq = &txo->q;
+	struct be_eth_hdr_wrb *hdr = queue_index_node(txq, head);
+
+	wrb_fill_hdr(adapter, hdr, wrb_params, skb);
+	be_dws_cpu_to_le(hdr, sizeof(*hdr));
+
+	BUG_ON(txo->sent_skb_list[head]);
+	txo->sent_skb_list[head] = skb;
+	txo->last_req_hdr = head;
+	atomic_add(num_frags, &txq->used);
+	txo->last_req_wrb_cnt = num_frags;
+	txo->pend_wrb_cnt += num_frags;
+}
+
+/* Setup a WRB fragment (buffer descriptor) for xmit */
+static void be_tx_setup_wrb_frag(struct be_tx_obj *txo, dma_addr_t busaddr,
+				 int len)
+{
+	struct be_eth_wrb *wrb;
+	struct be_queue_info *txq = &txo->q;
+
+	wrb = queue_head_node(txq);
+	wrb_fill(wrb, busaddr, len);
+	queue_head_inc(txq);
+}
+
+/* Bring the queue back to the state it was in before be_xmit_enqueue() routine
+ * was invoked. The producer index is restored to the previous packet and the
+ * WRBs of the current packet are unmapped. Invoked to handle tx setup errors.
+ */
+static void be_xmit_restore(struct be_adapter *adapter,
+			    struct be_tx_obj *txo, u16 head, bool map_single,
+			    u32 copied)
+{
+	struct device *dev;
+	struct be_eth_wrb *wrb;
+	struct be_queue_info *txq = &txo->q;
+
+	dev = &adapter->pdev->dev;
+	txq->head = head;
+
+	/* skip the first wrb (hdr); it's not mapped */
+	queue_head_inc(txq);
+	while (copied) {
+		wrb = queue_head_node(txq);
+		unmap_tx_frag(dev, wrb, map_single);
+		map_single = false;
+		copied -= le32_to_cpu(wrb->frag_len);
+		queue_head_inc(txq);
+	}
+
+	txq->head = head;
+}
+
+/* Enqueue the given packet for transmit. This routine allocates WRBs for the
+ * packet, dma maps the packet buffers and sets up the WRBs. Returns the number
+ * of WRBs used up by the packet.
+ */
 static u32 be_xmit_enqueue(struct be_adapter *adapter, struct be_tx_obj *txo,
-			   struct sk_buff *skb, bool skip_hw_vlan)
+			   struct sk_buff *skb,
+			   struct be_wrb_params *wrb_params)
 {
 	u32 i, copied = 0, wrb_cnt = skb_wrb_cnt(skb);
 	struct device *dev = &adapter->pdev->dev;
 	struct be_queue_info *txq = &txo->q;
-	struct be_eth_hdr_wrb *hdr;
 	bool map_single = false;
-	struct be_eth_wrb *wrb;
-	dma_addr_t busaddr;
 	u16 head = txq->head;
+	dma_addr_t busaddr;
+	int len;
 
-	hdr = queue_head_node(txq);
-	wrb_fill_hdr(adapter, hdr, skb, wrb_cnt, skb->len, skip_hw_vlan);
-	be_dws_cpu_to_le(hdr, sizeof(*hdr));
-
-	queue_head_inc(txq);
+	head = be_tx_get_wrb_hdr(txo);
 
 	if (skb->len > skb->data_len) {
-		int len = skb_headlen(skb);
+		len = skb_headlen(skb);
 
 		busaddr = dma_map_single(dev, skb->data, len, DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, busaddr))
 			goto dma_err;
 		map_single = true;
-		wrb = queue_head_node(txq);
-		wrb_fill(wrb, busaddr, len);
-		queue_head_inc(txq);
+		be_tx_setup_wrb_frag(txo, busaddr, len);
 		copied += len;
 	}
 
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+		len = skb_frag_size(frag);
 
-		busaddr = skb_frag_dma_map(dev, frag, 0,
-					   skb_frag_size(frag), DMA_TO_DEVICE);
+		busaddr = skb_frag_dma_map(dev, frag, 0, len, DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, busaddr))
 			goto dma_err;
-		wrb = queue_head_node(txq);
-		wrb_fill(wrb, busaddr, skb_frag_size(frag));
-		queue_head_inc(txq);
-		copied += skb_frag_size(frag);
+		be_tx_setup_wrb_frag(txo, busaddr, len);
+		copied += len;
 	}
 
-	BUG_ON(txo->sent_skb_list[head]);
-	txo->sent_skb_list[head] = skb;
-	txo->last_req_hdr = head;
-	atomic_add(wrb_cnt, &txq->used);
-	txo->last_req_wrb_cnt = wrb_cnt;
-	txo->pend_wrb_cnt += wrb_cnt;
+	be_tx_setup_wrb_hdr(adapter, txo, wrb_params, skb, head);
 
 	be_tx_stats_update(txo, skb);
 	return wrb_cnt;
 
 dma_err:
-	/* Bring the queue back to the state it was in before this
-	 * routine was invoked.
-	 */
-	txq->head = head;
-	/* skip the first wrb (hdr); it's not mapped */
-	queue_head_inc(txq);
-	while (copied) {
-		wrb = queue_head_node(txq);
-		unmap_tx_frag(dev, wrb, map_single);
-		map_single = false;
-		copied -= le32_to_cpu(wrb->frag_len);
-		adapter->drv_stats.dma_map_errors++;
-		queue_head_inc(txq);
-	}
-	txq->head = head;
+	adapter->drv_stats.dma_map_errors++;
+	be_xmit_restore(adapter, txo, head, map_single, copied);
 	return 0;
 }
 
@@ -869,7 +954,8 @@ static inline int qnq_async_evt_rcvd(struct be_adapter *adapter)
 
 static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter,
 					     struct sk_buff *skb,
-					     bool *skip_hw_vlan)
+					     struct be_wrb_params
+					     *wrb_params)
 {
 	u16 vlan_tag = 0;
 
@@ -886,8 +972,7 @@ static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter,
 		/* f/w workaround to set skip_hw_vlan = 1, informs the F/W to
 		 * skip VLAN insertion
 		 */
-		if (skip_hw_vlan)
-			*skip_hw_vlan = true;
+		BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1);
 	}
 
 	if (vlan_tag) {
@@ -905,8 +990,7 @@ static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter,
 						vlan_tag);
 		if (unlikely(!skb))
 			return skb;
-		if (skip_hw_vlan)
-			*skip_hw_vlan = true;
+		BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1);
 	}
 
 	return skb;
@@ -946,7 +1030,8 @@ static int be_ipv6_tx_stall_chk(struct be_adapter *adapter, struct sk_buff *skb)
 
 static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
 						  struct sk_buff *skb,
-						  bool *skip_hw_vlan)
+						  struct be_wrb_params
+						  *wrb_params)
 {
 	struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
 	unsigned int eth_hdr_len;
@@ -970,7 +1055,7 @@ static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
 	 */
 	if (be_pvid_tagging_enabled(adapter) &&
 	    veh->h_vlan_proto == htons(ETH_P_8021Q))
-		*skip_hw_vlan = true;
+		BE_WRB_F_SET(wrb_params->features, VLAN_SKIP_HW, 1);
 
 	/* HW has a bug wherein it will calculate CSUM for VLAN
 	 * pkts even though it is disabled.
@@ -978,7 +1063,7 @@ static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
 	 */
 	if (skb->ip_summed != CHECKSUM_PARTIAL &&
 	    skb_vlan_tag_present(skb)) {
-		skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan);
+		skb = be_insert_vlan_in_pkt(adapter, skb, wrb_params);
 		if (unlikely(!skb))
 			goto err;
 	}
@@ -1000,7 +1085,7 @@ static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
 	 */
 	if (be_ipv6_tx_stall_chk(adapter, skb) &&
 	    be_vlan_tag_tx_chk(adapter, skb)) {
-		skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan);
+		skb = be_insert_vlan_in_pkt(adapter, skb, wrb_params);
 		if (unlikely(!skb))
 			goto err;
 	}
@@ -1014,7 +1099,7 @@ err:
 
 static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter,
 					   struct sk_buff *skb,
-					   bool *skip_hw_vlan)
+					   struct be_wrb_params *wrb_params)
 {
 	/* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or
 	 * less may cause a transmit stall on that port. So the work-around is
@@ -1026,7 +1111,7 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter,
 	}
 
 	if (BEx_chip(adapter) || lancer_chip(adapter)) {
-		skb = be_lancer_xmit_workarounds(adapter, skb, skip_hw_vlan);
+		skb = be_lancer_xmit_workarounds(adapter, skb, wrb_params);
 		if (!skb)
 			return NULL;
 	}
@@ -1060,24 +1145,26 @@ static void be_xmit_flush(struct be_adapter *adapter, struct be_tx_obj *txo)
 
 static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
-	bool skip_hw_vlan = false, flush = !skb->xmit_more;
 	struct be_adapter *adapter = netdev_priv(netdev);
 	u16 q_idx = skb_get_queue_mapping(skb);
 	struct be_tx_obj *txo = &adapter->tx_obj[q_idx];
-	struct be_queue_info *txq = &txo->q;
+	struct be_wrb_params wrb_params = { 0 };
+	bool flush = !skb->xmit_more;
 	u16 wrb_cnt;
 
-	skb = be_xmit_workarounds(adapter, skb, &skip_hw_vlan);
+	skb = be_xmit_workarounds(adapter, skb, &wrb_params);
 	if (unlikely(!skb))
 		goto drop;
 
-	wrb_cnt = be_xmit_enqueue(adapter, txo, skb, skip_hw_vlan);
+	be_get_wrb_params_from_skb(adapter, skb, &wrb_params);
+
+	wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params);
 	if (unlikely(!wrb_cnt)) {
 		dev_kfree_skb_any(skb);
 		goto drop;
 	}
 
-	if ((atomic_read(&txq->used) + BE_MAX_TX_FRAG_COUNT) >= txq->len) {
+	if (be_is_txq_full(txo)) {
 		netif_stop_subqueue(netdev, q_idx);
 		tx_stats(txo)->tx_stops++;
 	}
@@ -1991,18 +2078,23 @@ static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp, u32 frags_needed)
 	}
 }
 
-static struct be_eth_tx_compl *be_tx_compl_get(struct be_queue_info *tx_cq)
+static struct be_tx_compl_info *be_tx_compl_get(struct be_tx_obj *txo)
 {
-	struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq);
+	struct be_queue_info *tx_cq = &txo->cq;
+	struct be_tx_compl_info *txcp = &txo->txcp;
+	struct be_eth_tx_compl *compl = queue_tail_node(tx_cq);
 
-	if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
+	if (compl->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
 		return NULL;
 
+	/* Ensure load ordering of valid bit dword and other dwords below */
 	rmb();
-	be_dws_le_to_cpu(txcp, sizeof(*txcp));
+	be_dws_le_to_cpu(compl, sizeof(*compl));
 
-	txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0;
+	txcp->status = GET_TX_COMPL_BITS(status, compl);
+	txcp->end_index = GET_TX_COMPL_BITS(wrb_index, compl);
 
+	compl->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0;
 	queue_tail_inc(tx_cq);
 	return txcp;
 }
@@ -2123,9 +2215,9 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 {
 	u16 end_idx, notified_idx, cmpl = 0, timeo = 0, num_wrbs = 0;
 	struct device *dev = &adapter->pdev->dev;
-	struct be_tx_obj *txo;
+	struct be_tx_compl_info *txcp;
 	struct be_queue_info *txq;
-	struct be_eth_tx_compl *txcp;
+	struct be_tx_obj *txo;
 	int i, pending_txqs;
 
 	/* Stop polling for compls when HW has been silent for 10ms */
@@ -2136,10 +2228,10 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 			cmpl = 0;
 			num_wrbs = 0;
 			txq = &txo->q;
-			while ((txcp = be_tx_compl_get(&txo->cq))) {
-				end_idx = GET_TX_COMPL_BITS(wrb_index, txcp);
-				num_wrbs += be_tx_compl_process(adapter, txo,
-								end_idx);
+			while ((txcp = be_tx_compl_get(txo))) {
+				num_wrbs +=
+					be_tx_compl_process(adapter, txo,
+							    txcp->end_index);
 				cmpl++;
 			}
 			if (cmpl) {
@@ -2147,7 +2239,7 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 				atomic_sub(num_wrbs, &txq->used);
 				timeo = 0;
 			}
-			if (atomic_read(&txq->used) == txo->pend_wrb_cnt)
+			if (!be_is_tx_compl_pending(txo))
 				pending_txqs--;
 		}
 
@@ -2498,7 +2590,7 @@ loop_continue:
 	return work_done;
 }
 
-static inline void be_update_tx_err(struct be_tx_obj *txo, u32 status)
+static inline void be_update_tx_err(struct be_tx_obj *txo, u8 status)
 {
 	switch (status) {
 	case BE_TX_COMP_HDR_PARSE_ERR:
@@ -2513,7 +2605,7 @@ static inline void be_update_tx_err(struct be_tx_obj *txo, u32 status)
 	}
 }
 
-static inline void lancer_update_tx_err(struct be_tx_obj *txo, u32 status)
+static inline void lancer_update_tx_err(struct be_tx_obj *txo, u8 status)
 {
 	switch (status) {
 	case LANCER_TX_COMP_LSO_ERR:
@@ -2538,22 +2630,18 @@ static inline void lancer_update_tx_err(struct be_tx_obj *txo, u32 status)
 static void be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
 			  int idx)
 {
-	struct be_eth_tx_compl *txcp;
 	int num_wrbs = 0, work_done = 0;
-	u32 compl_status;
-	u16 last_idx;
+	struct be_tx_compl_info *txcp;
 
-	while ((txcp = be_tx_compl_get(&txo->cq))) {
-		last_idx = GET_TX_COMPL_BITS(wrb_index, txcp);
-		num_wrbs += be_tx_compl_process(adapter, txo, last_idx);
+	while ((txcp = be_tx_compl_get(txo))) {
+		num_wrbs += be_tx_compl_process(adapter, txo, txcp->end_index);
 		work_done++;
 
-		compl_status = GET_TX_COMPL_BITS(status, txcp);
-		if (compl_status) {
+		if (txcp->status) {
 			if (lancer_chip(adapter))
-				lancer_update_tx_err(txo, compl_status);
+				lancer_update_tx_err(txo, txcp->status);
 			else
-				be_update_tx_err(txo, compl_status);
+				be_update_tx_err(txo, txcp->status);
 		}
 	}
 
@@ -2564,7 +2652,7 @@ static void be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
 		/* As Tx wrbs have been freed up, wake up netdev queue
 		 * if it was stopped due to lack of tx wrbs.  */
 		if (__netif_subqueue_stopped(adapter->netdev, idx) &&
-		    atomic_read(&txo->q.used) < txo->q.len / 2) {
+		    be_can_txq_wake(txo)) {
 			netif_wake_subqueue(adapter->netdev, idx);
 		}
 
diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c
index 22e0cad1b4b5..401abf7254d3 100644
--- a/drivers/net/ethernet/sun/sunvnet.c
+++ b/drivers/net/ethernet/sun/sunvnet.c
@@ -1411,6 +1411,8 @@ static int vnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(err < 0)) {
 		netdev_info(dev, "TX trigger error %d\n", err);
 		d->hdr.state = VIO_DESC_FREE;
+		skb = port->tx_bufs[txi].skb;
+		port->tx_bufs[txi].skb = NULL;
 		dev->stats.tx_carrier_errors++;
 		goto out_dropped;
 	}
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 9cdfb3fe9c15..3c8dfe5e46ed 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1477,6 +1477,7 @@ static void tiocmget_intr_callback(struct urb *urb)
 	struct uart_icount *icount;
 	struct hso_serial_state_notification *serial_state_notification;
 	struct usb_device *usb;
+	struct usb_interface *interface;
 	int if_num;
 
 	/* Sanity checks */
@@ -1494,7 +1495,9 @@ static void tiocmget_intr_callback(struct urb *urb)
 	BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
 
 	usb = serial->parent->usb;
-	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
+	interface = serial->parent->interface;
+
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 
 	/* wIndex should be the USB interface number of the port to which the
 	 * notification applies, which should always be the Modem port.
@@ -1675,6 +1678,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty,
 	unsigned long flags;
 	int if_num;
 	struct hso_serial *serial = tty->driver_data;
+	struct usb_interface *interface;
 
 	/* sanity check */
 	if (!serial) {
@@ -1685,7 +1689,8 @@ static int hso_serial_tiocmset(struct tty_struct *tty,
 	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
 		return -EINVAL;
 
-	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
+	interface = serial->parent->interface;
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 
 	spin_lock_irqsave(&serial->serial_lock, flags);
 	if (set & TIOCM_RTS)
@@ -2808,7 +2813,7 @@ static int hso_get_config_data(struct usb_interface *interface)
 {
 	struct usb_device *usbdev = interface_to_usbdev(interface);
 	u8 *config_data = kmalloc(17, GFP_KERNEL);
-	u32 if_num = interface->altsetting->desc.bInterfaceNumber;
+	u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 	s32 result;
 
 	if (!config_data)
@@ -2886,7 +2891,7 @@ static int hso_probe(struct usb_interface *interface,
 		return -ENODEV;
 	}
 
-	if_num = interface->altsetting->desc.bInterfaceNumber;
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 438fc6bcaef1..5065538dd03b 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -104,7 +104,8 @@
 #define USB_TX_AGG		0xd40a
 #define USB_RX_BUF_TH		0xd40c
 #define USB_USB_TIMER		0xd428
-#define USB_RX_EARLY_AGG	0xd42c
+#define USB_RX_EARLY_TIMEOUT	0xd42c
+#define USB_RX_EARLY_SIZE	0xd42e
 #define USB_PM_CTRL_STATUS	0xd432
 #define USB_TX_DMA		0xd434
 #define USB_TOLERANCE		0xd490
@@ -349,10 +350,10 @@
 /* USB_MISC_0 */
 #define PCUT_STATUS		0x0001
 
-/* USB_RX_EARLY_AGG */
-#define EARLY_AGG_SUPPER	0x0e832981
-#define EARLY_AGG_HIGH		0x0e837a12
-#define EARLY_AGG_SLOW		0x0e83ffff
+/* USB_RX_EARLY_TIMEOUT */
+#define COALESCE_SUPER		 85000U
+#define COALESCE_HIGH		250000U
+#define COALESCE_SLOW		524280U
 
 /* USB_WDT11_CTRL */
 #define TIMER11_EN		0x0001
@@ -606,6 +607,7 @@ struct r8152 {
 	u32 saved_wolopts;
 	u32 msg_enable;
 	u32 tx_qlen;
+	u32 coalesce;
 	u16 ocp_base;
 	u8 *intr_buff;
 	u8 version;
@@ -2142,28 +2144,19 @@ static int rtl8152_enable(struct r8152 *tp)
 	return rtl_enable(tp);
 }
 
-static void r8153_set_rx_agg(struct r8152 *tp)
+static void r8153_set_rx_early_timeout(struct r8152 *tp)
 {
-	u8 speed;
+	u32 ocp_data = tp->coalesce / 8;
 
-	speed = rtl8152_get_speed(tp);
-	if (speed & _1000bps) {
-		if (tp->udev->speed == USB_SPEED_SUPER) {
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
-					RX_THR_SUPPER);
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
-					EARLY_AGG_SUPPER);
-		} else {
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
-					RX_THR_HIGH);
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
-					EARLY_AGG_HIGH);
-		}
-	} else {
-		ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW);
-		ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
-				EARLY_AGG_SLOW);
-	}
+	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data);
+}
+
+static void r8153_set_rx_early_size(struct r8152 *tp)
+{
+	u32 mtu = tp->netdev->mtu;
+	u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4;
+
+	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
 }
 
 static int rtl8153_enable(struct r8152 *tp)
@@ -2173,7 +2166,8 @@ static int rtl8153_enable(struct r8152 *tp)
 
 	set_tx_qlen(tp);
 	rtl_set_eee_plus(tp);
-	r8153_set_rx_agg(tp);
+	r8153_set_rx_early_timeout(tp);
+	r8153_set_rx_early_size(tp);
 
 	return rtl_enable(tp);
 }
@@ -3719,6 +3713,61 @@ out:
 	return ret;
 }
 
+static int rtl8152_get_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *coalesce)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+		return -EOPNOTSUPP;
+	default:
+		break;
+	}
+
+	coalesce->rx_coalesce_usecs = tp->coalesce;
+
+	return 0;
+}
+
+static int rtl8152_set_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *coalesce)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int ret;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+		return -EOPNOTSUPP;
+	default:
+		break;
+	}
+
+	if (coalesce->rx_coalesce_usecs > COALESCE_SLOW)
+		return -EINVAL;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&tp->control);
+
+	if (tp->coalesce != coalesce->rx_coalesce_usecs) {
+		tp->coalesce = coalesce->rx_coalesce_usecs;
+
+		if (netif_running(tp->netdev) && netif_carrier_ok(netdev))
+			r8153_set_rx_early_timeout(tp);
+	}
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+	return ret;
+}
+
 static struct ethtool_ops ops = {
 	.get_drvinfo = rtl8152_get_drvinfo,
 	.get_settings = rtl8152_get_settings,
@@ -3732,6 +3781,8 @@ static struct ethtool_ops ops = {
 	.get_strings = rtl8152_get_strings,
 	.get_sset_count = rtl8152_get_sset_count,
 	.get_ethtool_stats = rtl8152_get_ethtool_stats,
+	.get_coalesce = rtl8152_get_coalesce,
+	.set_coalesce = rtl8152_set_coalesce,
 	.get_eee = rtl_ethtool_get_eee,
 	.set_eee = rtl_ethtool_set_eee,
 };
@@ -3783,6 +3834,7 @@ out:
 static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct r8152 *tp = netdev_priv(dev);
+	int ret;
 
 	switch (tp->version) {
 	case RTL_VER_01:
@@ -3795,9 +3847,22 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
 	if (new_mtu < 68 || new_mtu > RTL8153_MAX_MTU)
 		return -EINVAL;
 
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&tp->control);
+
 	dev->mtu = new_mtu;
 
-	return 0;
+	if (netif_running(dev) && netif_carrier_ok(dev))
+		r8153_set_rx_early_size(tp);
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+	return ret;
 }
 
 static const struct net_device_ops rtl8152_netdev_ops = {
@@ -3966,6 +4031,18 @@ static int rtl8152_probe(struct usb_interface *intf,
 	tp->mii.reg_num_mask = 0x1f;
 	tp->mii.phy_id = R8152_PHY_ID;
 
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
+		tp->coalesce = COALESCE_SUPER;
+		break;
+	case USB_SPEED_HIGH:
+		tp->coalesce = COALESCE_HIGH;
+		break;
+	default:
+		tp->coalesce = COALESCE_SLOW;
+		break;
+	}
+
 	intf->needs_remote_wakeup = 1;
 
 	tp->rtl_ops.init(tp);
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index d6d2f0f00caa..d372ebfd933d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1386,7 +1386,8 @@ static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
 	lockdep_assert_held(&ar->conf_mutex);
 
 	bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
-			       info->bssid, NULL, 0, 0, 0);
+			       info->bssid, NULL, 0, IEEE80211_BSS_TYPE_ANY,
+			       IEEE80211_PRIVACY_ANY);
 	if (bss) {
 		const struct cfg80211_bss_ies *ies;
 
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 85da63a67faf..d740f14f3539 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -686,20 +686,21 @@ ath6kl_add_bss_if_needed(struct ath6kl_vif *vif,
 {
 	struct ath6kl *ar = vif->ar;
 	struct cfg80211_bss *bss;
-	u16 cap_mask, cap_val;
+	u16 cap_val;
+	enum ieee80211_bss_type bss_type;
 	u8 *ie;
 
 	if (nw_type & ADHOC_NETWORK) {
-		cap_mask = WLAN_CAPABILITY_IBSS;
 		cap_val = WLAN_CAPABILITY_IBSS;
+		bss_type = IEEE80211_BSS_TYPE_IBSS;
 	} else {
-		cap_mask = WLAN_CAPABILITY_ESS;
 		cap_val = WLAN_CAPABILITY_ESS;
+		bss_type = IEEE80211_BSS_TYPE_ESS;
 	}
 
 	bss = cfg80211_get_bss(ar->wiphy, chan, bssid,
 			       vif->ssid, vif->ssid_len,
-			       cap_mask, cap_val);
+			       bss_type, IEEE80211_PRIVACY_ANY);
 	if (bss == NULL) {
 		/*
 		 * Since cfg80211 may not yet know about the BSS,
@@ -1495,6 +1496,7 @@ static int ath6kl_cfg80211_set_power_mgmt(struct wiphy *wiphy,
 
 static struct wireless_dev *ath6kl_cfg80211_add_iface(struct wiphy *wiphy,
 						      const char *name,
+						      unsigned char name_assign_type,
 						      enum nl80211_iftype type,
 						      u32 *flags,
 						      struct vif_params *params)
@@ -1513,7 +1515,7 @@ static struct wireless_dev *ath6kl_cfg80211_add_iface(struct wiphy *wiphy,
 		return ERR_PTR(-EINVAL);
 	}
 
-	wdev = ath6kl_interface_add(ar, name, type, if_idx, nw_type);
+	wdev = ath6kl_interface_add(ar, name, name_assign_type, type, if_idx, nw_type);
 	if (!wdev)
 		return ERR_PTR(-ENOMEM);
 
@@ -3633,13 +3635,14 @@ void ath6kl_cfg80211_vif_cleanup(struct ath6kl_vif *vif)
 }
 
 struct wireless_dev *ath6kl_interface_add(struct ath6kl *ar, const char *name,
+					  unsigned char name_assign_type,
 					  enum nl80211_iftype type,
 					  u8 fw_vif_idx, u8 nw_type)
 {
 	struct net_device *ndev;
 	struct ath6kl_vif *vif;
 
-	ndev = alloc_netdev(sizeof(*vif), name, NET_NAME_UNKNOWN, ether_setup);
+	ndev = alloc_netdev(sizeof(*vif), name, name_assign_type, ether_setup);
 	if (!ndev)
 		return NULL;
 
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h
index b59becd91aea..5aa57a7639bf 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.h
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h
@@ -25,6 +25,7 @@ enum ath6kl_cfg_suspend_mode {
 };
 
 struct wireless_dev *ath6kl_interface_add(struct ath6kl *ar, const char *name,
+					  unsigned char name_assign_type,
 					  enum nl80211_iftype type,
 					  u8 fw_vif_idx, u8 nw_type);
 void ath6kl_cfg80211_ch_switch_notify(struct ath6kl_vif *vif, int freq,
diff --git a/drivers/net/wireless/ath/ath6kl/core.c b/drivers/net/wireless/ath/ath6kl/core.c
index 0df74b245af4..4ec02cea0f43 100644
--- a/drivers/net/wireless/ath/ath6kl/core.c
+++ b/drivers/net/wireless/ath/ath6kl/core.c
@@ -211,8 +211,8 @@ int ath6kl_core_init(struct ath6kl *ar, enum ath6kl_htc_type htc_type)
 	rtnl_lock();
 
 	/* Add an initial station interface */
-	wdev = ath6kl_interface_add(ar, "wlan%d", NL80211_IFTYPE_STATION, 0,
-				    INFRA_NETWORK);
+	wdev = ath6kl_interface_add(ar, "wlan%d", NET_NAME_ENUM,
+				    NL80211_IFTYPE_STATION, 0, INFRA_NETWORK);
 
 	rtnl_unlock();
 
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 2d5ea21be47e..adfd815e3f7d 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -395,7 +395,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 
 	bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
 			       sme->ssid, sme->ssid_len,
-			       WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+			       IEEE80211_BSS_TYPE_ESS, IEEE80211_PRIVACY_ANY);
 	if (!bss) {
 		wil_err(wil, "Unable to find BSS\n");
 		return -ENOENT;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
index b59b8c6c42ab..bcbccba4cdbf 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -625,6 +625,7 @@ static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif)
 
 static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy,
 						     const char *name,
+						     unsigned char name_assign_type,
 						     enum nl80211_iftype type,
 						     u32 *flags,
 						     struct vif_params *params)
@@ -648,7 +649,7 @@ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy,
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_P2P_GO:
 	case NL80211_IFTYPE_P2P_DEVICE:
-		wdev = brcmf_p2p_add_vif(wiphy, name, type, flags, params);
+		wdev = brcmf_p2p_add_vif(wiphy, name, name_assign_type, type, flags, params);
 		if (!IS_ERR(wdev))
 			brcmf_cfg80211_update_proto_addr_mode(wdev);
 		return wdev;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
index effb48ebd864..b44ea85dd9db 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
@@ -2246,11 +2246,13 @@ static void brcmf_p2p_delete_p2pdev(struct brcmf_p2p_info *p2p,
  *
  * @wiphy: wiphy device of new interface.
  * @name: name of the new interface.
+ * @name_assign_type: origin of the interface name
  * @type: nl80211 interface type.
  * @flags: not used.
  * @params: contains mac address for P2P device.
  */
 struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
+				       unsigned char name_assign_type,
 				       enum nl80211_iftype type, u32 *flags,
 				       struct vif_params *params)
 {
@@ -2310,6 +2312,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
 	}
 
 	strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1);
+	ifp->ndev->name_assign_type = name_assign_type;
 	err = brcmf_net_attach(ifp, true);
 	if (err) {
 		brcmf_err("Registering netdevice failed\n");
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
index 6821b26224be..872f382d9e49 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
@@ -149,6 +149,7 @@ struct brcmf_p2p_info {
 s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg);
 void brcmf_p2p_detach(struct brcmf_p2p_info *p2p);
 struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
+				       unsigned char name_assign_type,
 				       enum nl80211_iftype type, u32 *flags,
 				       struct vif_params *params);
 int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev);
diff --git a/drivers/net/wireless/cw1200/sta.c b/drivers/net/wireless/cw1200/sta.c
index 4a47c7f8a246..1b58b2e2a538 100644
--- a/drivers/net/wireless/cw1200/sta.c
+++ b/drivers/net/wireless/cw1200/sta.c
@@ -1240,8 +1240,8 @@ static void cw1200_do_join(struct cw1200_common *priv)
 
 	bssid = priv->vif->bss_conf.bssid;
 
-	bss = cfg80211_get_bss(priv->hw->wiphy, priv->channel,
-			bssid, NULL, 0, 0, 0);
+	bss = cfg80211_get_bss(priv->hw->wiphy, priv->channel, bssid, NULL, 0,
+			       IEEE80211_BSS_TYPE_ANY, IEEE80211_PRIVACY_ANY);
 
 	if (!bss && !conf->ibss_joined) {
 		wsm_unlock_tx(priv);
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index 21de4fe6cf2d..d6ec44d7a391 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -66,7 +66,7 @@ config IPW2100_DEBUG
 config IPW2200
 	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
 	depends on PCI && CFG80211
-	select CFG80211_WEXT
+	select CFG80211_WEXT_EXPORT
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index cceb026e0793..5abd62ed8cb4 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -1130,20 +1130,23 @@ done:
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
-static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     enum ieee80211_rssi_event rssi_event)
+static void iwlagn_mac_event_callback(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      const struct ieee80211_event *event)
 {
 	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
 
+	if (event->type != RSSI_EVENT)
+		return;
+
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 	mutex_lock(&priv->mutex);
 
 	if (priv->lib->bt_params &&
 	    priv->lib->bt_params->advanced_bt_coexist) {
-		if (rssi_event == RSSI_EVENT_LOW)
+		if (event->u.rssi.data == RSSI_EVENT_LOW)
 			priv->bt_enable_pspoll = true;
-		else if (rssi_event == RSSI_EVENT_HIGH)
+		else if (event->u.rssi.data == RSSI_EVENT_HIGH)
 			priv->bt_enable_pspoll = false;
 
 		iwlagn_send_advance_bt_config(priv);
@@ -1614,7 +1617,7 @@ const struct ieee80211_ops iwlagn_hw_ops = {
 	.channel_switch = iwlagn_mac_channel_switch,
 	.flush = iwlagn_mac_flush,
 	.tx_last_beacon = iwlagn_mac_tx_last_beacon,
-	.rssi_callback = iwlagn_mac_rssi_callback,
+	.event_callback = iwlagn_mac_event_callback,
 	.set_tim = iwlagn_mac_set_tim,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 770b0e2a9b46..13a0a03158de 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -807,7 +807,7 @@ static void iwl_mvm_bt_rssi_iterator(void *_data, u8 *mac,
 }
 
 void iwl_mvm_bt_rssi_event(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-			   enum ieee80211_rssi_event rssi_event)
+			   enum ieee80211_rssi_event_data rssi_event)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_bt_iterator_data data = {
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c b/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c
index 4f303639147b..d954591e0be5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c
@@ -1128,7 +1128,7 @@ static void iwl_mvm_bt_rssi_iterator(void *_data, u8 *mac,
 }
 
 void iwl_mvm_bt_rssi_event_old(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-			       enum ieee80211_rssi_event rssi_event)
+			       enum ieee80211_rssi_event_data rssi_event)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_bt_iterator_data data = {
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 500064f5d8f1..2b7e6cb1dbd9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -1289,7 +1289,7 @@ int iwl_mvm_rx_bt_coex_notif(struct iwl_mvm *mvm,
 			     struct iwl_rx_cmd_buffer *rxb,
 			     struct iwl_device_cmd *cmd);
 void iwl_mvm_bt_rssi_event(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-			   enum ieee80211_rssi_event rssi_event);
+			   enum ieee80211_rssi_event_data);
 void iwl_mvm_bt_coex_vif_change(struct iwl_mvm *mvm);
 u16 iwl_mvm_coex_agg_time_limit(struct iwl_mvm *mvm,
 				struct ieee80211_sta *sta);
@@ -1309,7 +1309,7 @@ int iwl_mvm_rx_bt_coex_notif_old(struct iwl_mvm *mvm,
 				 struct iwl_rx_cmd_buffer *rxb,
 				 struct iwl_device_cmd *cmd);
 void iwl_mvm_bt_rssi_event_old(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
-			       enum ieee80211_rssi_event rssi_event);
+			       enum ieee80211_rssi_event_data);
 u16 iwl_mvm_coex_agg_time_limit_old(struct iwl_mvm *mvm,
 				    struct ieee80211_sta *sta);
 bool iwl_mvm_bt_coex_is_mimo_allowed_old(struct iwl_mvm *mvm,
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index a92985a6ea21..1a4d558022d8 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1356,8 +1356,8 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	/* Find the BSS we want using available scan results */
 	bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
-		sme->ssid, sme->ssid_len,
-		WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+		sme->ssid, sme->ssid_len, IEEE80211_BSS_TYPE_ESS,
+		IEEE80211_PRIVACY_ANY);
 	if (!bss) {
 		wiphy_err(wiphy, "assoc: bss %pM not in scan results\n",
 			  sme->bssid);
@@ -2000,7 +2000,7 @@ static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev,
 	 * bss list is populated already */
 	bss = cfg80211_get_bss(wiphy, params->chandef.chan, params->bssid,
 		params->ssid, params->ssid_len,
-		WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+		IEEE80211_BSS_TYPE_IBSS, IEEE80211_PRIVACY_ANY);
 
 	if (bss) {
 		ret = lbs_ibss_join_existing(priv, params, bss);
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 4a4c6586a8d2..941925991476 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -330,6 +330,83 @@ static const struct ieee80211_rate hwsim_rates[] = {
 	{ .bitrate = 540 }
 };
 
+#define OUI_QCA 0x001374
+#define QCA_NL80211_SUBCMD_TEST 1
+enum qca_nl80211_vendor_subcmds {
+	QCA_WLAN_VENDOR_ATTR_TEST = 8,
+	QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_TEST
+};
+
+static const struct nla_policy
+hwsim_vendor_test_policy[QCA_WLAN_VENDOR_ATTR_MAX + 1] = {
+	[QCA_WLAN_VENDOR_ATTR_MAX] = { .type = NLA_U32 },
+};
+
+static int mac80211_hwsim_vendor_cmd_test(struct wiphy *wiphy,
+					  struct wireless_dev *wdev,
+					  const void *data, int data_len)
+{
+	struct sk_buff *skb;
+	struct nlattr *tb[QCA_WLAN_VENDOR_ATTR_MAX + 1];
+	int err;
+	u32 val;
+
+	err = nla_parse(tb, QCA_WLAN_VENDOR_ATTR_MAX, data, data_len,
+			hwsim_vendor_test_policy);
+	if (err)
+		return err;
+	if (!tb[QCA_WLAN_VENDOR_ATTR_TEST])
+		return -EINVAL;
+	val = nla_get_u32(tb[QCA_WLAN_VENDOR_ATTR_TEST]);
+	wiphy_debug(wiphy, "%s: test=%u\n", __func__, val);
+
+	/* Send a vendor event as a test. Note that this would not normally be
+	 * done within a command handler, but rather, based on some other
+	 * trigger. For simplicity, this command is used to trigger the event
+	 * here.
+	 *
+	 * event_idx = 0 (index in mac80211_hwsim_vendor_commands)
+	 */
+	skb = cfg80211_vendor_event_alloc(wiphy, wdev, 100, 0, GFP_KERNEL);
+	if (skb) {
+		/* skb_put() or nla_put() will fill up data within
+		 * NL80211_ATTR_VENDOR_DATA.
+		 */
+
+		/* Add vendor data */
+		nla_put_u32(skb, QCA_WLAN_VENDOR_ATTR_TEST, val + 1);
+
+		/* Send the event - this will call nla_nest_end() */
+		cfg80211_vendor_event(skb, GFP_KERNEL);
+	}
+
+	/* Send a response to the command */
+	skb = cfg80211_vendor_cmd_alloc_reply_skb(wiphy, 10);
+	if (!skb)
+		return -ENOMEM;
+
+	/* skb_put() or nla_put() will fill up data within
+	 * NL80211_ATTR_VENDOR_DATA
+	 */
+	nla_put_u32(skb, QCA_WLAN_VENDOR_ATTR_TEST, val + 2);
+
+	return cfg80211_vendor_cmd_reply(skb);
+}
+
+static struct wiphy_vendor_command mac80211_hwsim_vendor_commands[] = {
+	{
+		.info = { .vendor_id = OUI_QCA,
+			  .subcmd = QCA_NL80211_SUBCMD_TEST },
+		.flags = WIPHY_VENDOR_CMD_NEED_NETDEV,
+		.doit = mac80211_hwsim_vendor_cmd_test,
+	}
+};
+
+/* Advertise support vendor specific events */
+static const struct nl80211_vendor_cmd_info mac80211_hwsim_vendor_events[] = {
+	{ .vendor_id = OUI_QCA, .subcmd = 1 },
+};
+
 static const struct ieee80211_iface_limit hwsim_if_limits[] = {
 	{ .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) },
 	{ .max = 2048,  .types = BIT(NL80211_IFTYPE_STATION) |
@@ -906,8 +983,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 		goto nla_put_failure;
 	}
 
-	if (nla_put(skb, HWSIM_ATTR_ADDR_TRANSMITTER,
-		    ETH_ALEN, data->addresses[1].addr))
+	if (nla_put(skb, HWSIM_ATTR_ADDR_TRANSMITTER, ETH_ALEN, hdr->addr2))
 		goto nla_put_failure;
 
 	/* We get the skb->data */
@@ -1519,21 +1595,16 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 		vp->aid = info->aid;
 	}
 
-	if (changed & BSS_CHANGED_BEACON_INT) {
-		wiphy_debug(hw->wiphy, "  BCNINT: %d\n", info->beacon_int);
-		data->beacon_int = info->beacon_int * 1024;
-	}
-
 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
-		wiphy_debug(hw->wiphy, "  BCN EN: %d\n", info->enable_beacon);
+		wiphy_debug(hw->wiphy, "  BCN EN: %d (BI=%u)\n",
+			    info->enable_beacon, info->beacon_int);
 		vp->bcn_en = info->enable_beacon;
 		if (data->started &&
 		    !hrtimer_is_queued(&data->beacon_timer.timer) &&
 		    info->enable_beacon) {
 			u64 tsf, until_tbtt;
 			u32 bcn_int;
-			if (WARN_ON(!data->beacon_int))
-				data->beacon_int = 1000 * 1024;
+			data->beacon_int = info->beacon_int * 1024;
 			tsf = mac80211_hwsim_get_tsf(hw, vif);
 			bcn_int = data->beacon_int;
 			until_tbtt = bcn_int - do_div(tsf, bcn_int);
@@ -1547,8 +1618,10 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 				mac80211_hwsim_bcn_en_iter, &count);
 			wiphy_debug(hw->wiphy, "  beaconing vifs remaining: %u",
 				    count);
-			if (count == 0)
+			if (count == 0) {
 				tasklet_hrtimer_cancel(&data->beacon_timer);
+				data->beacon_int = 0;
+			}
 		}
 	}
 
@@ -2417,6 +2490,12 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 	hw->max_rates = 4;
 	hw->max_rate_tries = 11;
 
+	hw->wiphy->vendor_commands = mac80211_hwsim_vendor_commands;
+	hw->wiphy->n_vendor_commands =
+		ARRAY_SIZE(mac80211_hwsim_vendor_commands);
+	hw->wiphy->vendor_events = mac80211_hwsim_vendor_events;
+	hw->wiphy->n_vendor_events = ARRAY_SIZE(mac80211_hwsim_vendor_events);
+
 	if (param->reg_strict)
 		hw->wiphy->regulatory_flags |= REGULATORY_STRICT_REG;
 	if (param->regd) {
@@ -2608,7 +2687,7 @@ static struct mac80211_hwsim_data *get_hwsim_data_ref_from_addr(const u8 *addr)
 
 	spin_lock_bh(&hwsim_radio_lock);
 	list_for_each_entry(data, &hwsim_radios, list) {
-		if (memcmp(data->addresses[1].addr, addr, ETH_ALEN) == 0) {
+		if (mac80211_hwsim_addr_match(data, addr)) {
 			_found = true;
 			break;
 		}
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 41c8e25df954..2d489bfaea08 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1954,13 +1954,13 @@ done:
 		if (mode == NL80211_IFTYPE_ADHOC)
 			bss = cfg80211_get_bss(priv->wdev.wiphy, channel,
 					       bssid, ssid, ssid_len,
-					       WLAN_CAPABILITY_IBSS,
-					       WLAN_CAPABILITY_IBSS);
+					       IEEE80211_BSS_TYPE_IBSS,
+					       IEEE80211_PRIVACY_ANY);
 		else
 			bss = cfg80211_get_bss(priv->wdev.wiphy, channel,
 					       bssid, ssid, ssid_len,
-					       WLAN_CAPABILITY_ESS,
-					       WLAN_CAPABILITY_ESS);
+					       IEEE80211_BSS_TYPE_ESS,
+					       IEEE80211_PRIVACY_ANY);
 
 		if (!bss) {
 			if (is_scanning_required) {
@@ -2399,10 +2399,11 @@ mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
 
 #define MWIFIEX_MAX_WQ_LEN  30
 /*
- *  create a new virtual interface with the given name
+ *  create a new virtual interface with the given name and name assign type
  */
 struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 					      const char *name,
+					      unsigned char name_assign_type,
 					      enum nl80211_iftype type,
 					      u32 *flags,
 					      struct vif_params *params)
@@ -2523,7 +2524,7 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	}
 
 	dev = alloc_netdev_mqs(sizeof(struct mwifiex_private *), name,
-			       NET_NAME_UNKNOWN, ether_setup,
+			       name_assign_type, ether_setup,
 			       IEEE80211_NUM_ACS, 1);
 	if (!dev) {
 		wiphy_err(wiphy, "no memory available for netdevice\n");
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 7e74b4fccddd..6f55e84fcab1 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -466,7 +466,7 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 
 	rtnl_lock();
 	/* Create station interface by default */
-	wdev = mwifiex_add_virtual_intf(adapter->wiphy, "mlan%d",
+	wdev = mwifiex_add_virtual_intf(adapter->wiphy, "mlan%d", NET_NAME_ENUM,
 					NL80211_IFTYPE_STATION, NULL, NULL);
 	if (IS_ERR(wdev)) {
 		dev_err(adapter->dev, "cannot create default STA interface\n");
@@ -475,7 +475,7 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 	}
 
 	if (driver_mode & MWIFIEX_DRIVER_MODE_UAP) {
-		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "uap%d",
+		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "uap%d", NET_NAME_ENUM,
 						NL80211_IFTYPE_AP, NULL, NULL);
 		if (IS_ERR(wdev)) {
 			dev_err(adapter->dev, "cannot create AP interface\n");
@@ -485,7 +485,7 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 	}
 
 	if (driver_mode & MWIFIEX_DRIVER_MODE_P2P) {
-		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "p2p%d",
+		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "p2p%d", NET_NAME_ENUM,
 						NL80211_IFTYPE_P2P_CLIENT, NULL,
 						NULL);
 		if (IS_ERR(wdev)) {
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index f0a6af179af0..3f0625f22265 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1318,6 +1318,7 @@ u8 mwifiex_chan_type_to_sec_chan_offset(enum nl80211_channel_type chan_type);
 
 struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 					      const char *name,
+					      unsigned char name_assign_type,
 					      enum nl80211_iftype type,
 					      u32 *flags,
 					      struct vif_params *params);
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index 6d831d4d1b5f..f6fa3f4e294f 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -2,7 +2,7 @@ config HERMES
 	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
 	depends on (PPC_PMAC || PCI || PCMCIA)
 	depends on CFG80211
-	select CFG80211_WEXT
+	select CFG80211_WEXT_EXPORT
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c
index c28f06854195..548bb9e7e91e 100644
--- a/drivers/net/wireless/ti/wl18xx/event.c
+++ b/drivers/net/wireless/ti/wl18xx/event.c
@@ -77,7 +77,7 @@ static int wlcore_smart_config_sync_event(struct wl1271 *wl, u8 sync_channel,
 	wl1271_debug(DEBUG_EVENT,
 		     "SMART_CONFIG_SYNC_EVENT_ID, freq: %d (chan: %d band %d)",
 		     freq, sync_channel, sync_band);
-	skb = cfg80211_vendor_event_alloc(wl->hw->wiphy, 20,
+	skb = cfg80211_vendor_event_alloc(wl->hw->wiphy, NULL, 20,
 					  WLCORE_VENDOR_EVENT_SC_SYNC,
 					  GFP_KERNEL);
 
@@ -98,7 +98,7 @@ static int wlcore_smart_config_decode_event(struct wl1271 *wl,
 	wl1271_debug(DEBUG_EVENT, "SMART_CONFIG_DECODE_EVENT_ID");
 	wl1271_dump_ascii(DEBUG_EVENT, "SSID:", ssid, ssid_len);
 
-	skb = cfg80211_vendor_event_alloc(wl->hw->wiphy,
+	skb = cfg80211_vendor_event_alloc(wl->hw->wiphy, NULL,
 					  ssid_len + pwd_len + 20,
 					  WLCORE_VENDOR_EVENT_SC_DECODE,
 					  GFP_KERNEL);