Merge branch 'master'

3 files changed, 537 insertions, 299 deletions

diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 455ba915ede7..7488ee7f7caf 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -602,7 +602,7 @@ MODULE_DEVICE_TABLE(pci, vortex_pci_tbl);
    First the windows.  There are eight register windows, with the command
    and status registers available in each.
    */
-#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+#define EL3WINDOW(win_num) iowrite16(SelectWindow + (win_num), ioaddr + EL3_CMD)
 #define EL3_CMD 0x0e
 #define EL3_STATUS 0x0e
 
@@ -776,7 +776,8 @@ struct vortex_private {
 
 	/* PCI configuration space information. */
 	struct device *gendev;
-	char __iomem *cb_fn_base;		/* CardBus function status addr space. */
+	void __iomem *ioaddr;			/* IO address space */
+	void __iomem *cb_fn_base;		/* CardBus function status addr space. */
 
 	/* Some values here only for performance evaluation and path-coverage */
 	int rx_nocopy, rx_copy, queued_packet, rx_csumhits;
@@ -869,12 +870,12 @@ static struct {
 /* number of ETHTOOL_GSTATS u64's */
 #define VORTEX_NUM_STATS     3
 
-static int vortex_probe1(struct device *gendev, long ioaddr, int irq,
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
 				   int chip_idx, int card_idx);
 static void vortex_up(struct net_device *dev);
 static void vortex_down(struct net_device *dev, int final);
 static int vortex_open(struct net_device *dev);
-static void mdio_sync(long ioaddr, int bits);
+static void mdio_sync(void __iomem *ioaddr, int bits);
 static int mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
 static void vortex_timer(unsigned long arg);
@@ -887,7 +888,7 @@ static irqreturn_t vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 static irqreturn_t boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 static int vortex_close(struct net_device *dev);
 static void dump_tx_ring(struct net_device *dev);
-static void update_stats(long ioaddr, struct net_device *dev);
+static void update_stats(void __iomem *ioaddr, struct net_device *dev);
 static struct net_device_stats *vortex_get_stats(struct net_device *dev);
 static void set_rx_mode(struct net_device *dev);
 #ifdef CONFIG_PCI
@@ -902,14 +903,16 @@ static void set_8021q_mode(struct net_device *dev, int enable);
 /* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
 /* Option count limit only -- unlimited interfaces are supported. */
 #define MAX_UNITS 8
-static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1,};
-static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int hw_checksums[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int flow_ctrl[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int enable_wol[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
 static int global_options = -1;
 static int global_full_duplex = -1;
 static int global_enable_wol = -1;
+static int global_use_mmio = -1;
 
 /* #define dev_alloc_skb dev_alloc_skb_debug */
 
@@ -934,21 +937,25 @@ module_param(compaq_ioaddr, int, 0);
 module_param(compaq_irq, int, 0);
 module_param(compaq_device_id, int, 0);
 module_param(watchdog, int, 0);
+module_param(global_use_mmio, int, 0);
+module_param_array(use_mmio, int, NULL, 0);
 MODULE_PARM_DESC(debug, "3c59x debug level (0-6)");
 MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex");
 MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset");
 MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)");
-MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset");
 MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)");
 MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)");
 MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)");
-MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset");
 MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames");
 MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt");
 MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)");
 MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds");
+MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)");
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void poll_vortex(struct net_device *dev)
@@ -1029,18 +1036,19 @@ static struct eisa_driver vortex_eisa_driver = {
 
 static int vortex_eisa_probe (struct device *device)
 {
-	long ioaddr;
+	void __iomem *ioaddr;
 	struct eisa_device *edev;
 
 	edev = to_eisa_device (device);
-	ioaddr = edev->base_addr;
 
-	if (!request_region(ioaddr, VORTEX_TOTAL_SIZE, DRV_NAME))
+	if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
 		return -EBUSY;
 
-	if (vortex_probe1(device, ioaddr, inw(ioaddr + 0xC88) >> 12,
+	ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+	if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
 					  edev->id.driver_data, vortex_cards_found)) {
-		release_region (ioaddr, VORTEX_TOTAL_SIZE);
+		release_region (edev->base_addr, VORTEX_TOTAL_SIZE);
 		return -ENODEV;
 	}
 
@@ -1054,7 +1062,7 @@ static int vortex_eisa_remove (struct device *device)
 	struct eisa_device *edev;
 	struct net_device *dev;
 	struct vortex_private *vp;
-	long ioaddr;
+	void __iomem *ioaddr;
 
 	edev = to_eisa_device (device);
 	dev = eisa_get_drvdata (edev);
@@ -1065,11 +1073,11 @@ static int vortex_eisa_remove (struct device *device)
 	}
 
 	vp = netdev_priv(dev);
-	ioaddr = dev->base_addr;
+	ioaddr = vp->ioaddr;
 	
 	unregister_netdev (dev);
-	outw (TotalReset|0x14, ioaddr + EL3_CMD);
-	release_region (ioaddr, VORTEX_TOTAL_SIZE);
+	iowrite16 (TotalReset|0x14, ioaddr + EL3_CMD);
+	release_region (dev->base_addr, VORTEX_TOTAL_SIZE);
 
 	free_netdev (dev);
 	return 0;
@@ -1096,8 +1104,8 @@ static int __init vortex_eisa_init (void)
 	
 	/* Special code to work-around the Compaq PCI BIOS32 problem. */
 	if (compaq_ioaddr) {
-		vortex_probe1(NULL, compaq_ioaddr, compaq_irq,
-					  compaq_device_id, vortex_cards_found++);
+		vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
+			      compaq_irq, compaq_device_id, vortex_cards_found++);
 	}
 
 	return vortex_cards_found - orig_cards_found + eisa_found;
@@ -1107,15 +1115,32 @@ static int __init vortex_eisa_init (void)
 static int __devinit vortex_init_one (struct pci_dev *pdev,
 				      const struct pci_device_id *ent)
 {
-	int rc;
+	int rc, unit, pci_bar;
+	struct vortex_chip_info *vci;
+	void __iomem *ioaddr;
 
 	/* wake up and enable device */		
 	rc = pci_enable_device (pdev);
 	if (rc < 0)
 		goto out;
 
-	rc = vortex_probe1 (&pdev->dev, pci_resource_start (pdev, 0),
-						pdev->irq, ent->driver_data, vortex_cards_found);
+	unit = vortex_cards_found;
+
+	if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
+		/* Determine the default if the user didn't override us */
+		vci = &vortex_info_tbl[ent->driver_data];
+		pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0;
+	} else if (unit < MAX_UNITS && use_mmio[unit] >= 0)
+		pci_bar = use_mmio[unit] ? 1 : 0;
+	else
+		pci_bar = global_use_mmio ? 1 : 0;
+
+	ioaddr = pci_iomap(pdev, pci_bar, 0);
+	if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
+		ioaddr = pci_iomap(pdev, 0, 0);
+
+	rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq,
+			   ent->driver_data, unit);
 	if (rc < 0) {
 		pci_disable_device (pdev);
 		goto out;
@@ -1134,7 +1159,7 @@ out:
  * NOTE: pdev can be NULL, for the case of a Compaq device
  */
 static int __devinit vortex_probe1(struct device *gendev,
-				   long ioaddr, int irq,
+				   void __iomem *ioaddr, int irq,
 				   int chip_idx, int card_idx)
 {
 	struct vortex_private *vp;
@@ -1202,15 +1227,16 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (print_info)
 		printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
 
-	printk(KERN_INFO "%s: 3Com %s %s at 0x%lx. Vers " DRV_VERSION "\n",
+	printk(KERN_INFO "%s: 3Com %s %s at %p. Vers " DRV_VERSION "\n",
 	       print_name,
 	       pdev ? "PCI" : "EISA",
 	       vci->name,
 	       ioaddr);
 
-	dev->base_addr = ioaddr;
+	dev->base_addr = (unsigned long)ioaddr;
 	dev->irq = irq;
 	dev->mtu = mtu;
+	vp->ioaddr = ioaddr;
 	vp->large_frames = mtu > 1500;
 	vp->drv_flags = vci->drv_flags;
 	vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0;
@@ -1226,7 +1252,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (pdev) {
 		/* EISA resources already marked, so only PCI needs to do this here */
 		/* Ignore return value, because Cardbus drivers already allocate for us */
-		if (request_region(ioaddr, vci->io_size, print_name) != NULL)
+		if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
 			vp->must_free_region = 1;
 
 		/* enable bus-mastering if necessary */		
@@ -1316,14 +1342,14 @@ static int __devinit vortex_probe1(struct device *gendev,
 
 		for (i = 0; i < 0x40; i++) {
 			int timer;
-			outw(base + i, ioaddr + Wn0EepromCmd);
+			iowrite16(base + i, ioaddr + Wn0EepromCmd);
 			/* Pause for at least 162 us. for the read to take place. */
 			for (timer = 10; timer >= 0; timer--) {
 				udelay(162);
-				if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
+				if ((ioread16(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
 					break;
 			}
-			eeprom[i] = inw(ioaddr + Wn0EepromData);
+			eeprom[i] = ioread16(ioaddr + Wn0EepromData);
 		}
 	}
 	for (i = 0; i < 0x18; i++)
@@ -1338,6 +1364,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
 	for (i = 0; i < 3; i++)
 		((u16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 	if (print_info) {
 		for (i = 0; i < 6; i++)
 			printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
@@ -1351,7 +1378,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	}
 	EL3WINDOW(2);
 	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + i);
+		iowrite8(dev->dev_addr[i], ioaddr + i);
 
 #ifdef __sparc__
 	if (print_info)
@@ -1366,7 +1393,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 #endif
 
 	EL3WINDOW(4);
-	step = (inb(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
+	step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
 	if (print_info) {
 		printk(KERN_INFO "  product code %02x%02x rev %02x.%d date %02d-"
 			"%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
@@ -1375,31 +1402,30 @@ static int __devinit vortex_probe1(struct device *gendev,
 
 
 	if (pdev && vci->drv_flags & HAS_CB_FNS) {
-		unsigned long fn_st_addr;			/* Cardbus function status space */
 		unsigned short n;
 
-		fn_st_addr = pci_resource_start (pdev, 2);
-		if (fn_st_addr) {
-			vp->cb_fn_base = ioremap(fn_st_addr, 128);
+		vp->cb_fn_base = pci_iomap(pdev, 2, 0);
+		if (!vp->cb_fn_base) {
 			retval = -ENOMEM;
-			if (!vp->cb_fn_base)
-				goto free_ring;
+			goto free_ring;
 		}
+
 		if (print_info) {
 			printk(KERN_INFO "%s: CardBus functions mapped %8.8lx->%p\n",
-				print_name, fn_st_addr, vp->cb_fn_base);
+				print_name, pci_resource_start(pdev, 2),
+				vp->cb_fn_base);
 		}
 		EL3WINDOW(2);
 
-		n = inw(ioaddr + Wn2_ResetOptions) & ~0x4010;
+		n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010;
 		if (vp->drv_flags & INVERT_LED_PWR)
 			n |= 0x10;
 		if (vp->drv_flags & INVERT_MII_PWR)
 			n |= 0x4000;
-		outw(n, ioaddr + Wn2_ResetOptions);
+		iowrite16(n, ioaddr + Wn2_ResetOptions);
 		if (vp->drv_flags & WNO_XCVR_PWR) {
 			EL3WINDOW(0);
-			outw(0x0800, ioaddr);
+			iowrite16(0x0800, ioaddr);
 		}
 	}
 
@@ -1418,13 +1444,13 @@ static int __devinit vortex_probe1(struct device *gendev,
 		static const char * ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
 		unsigned int config;
 		EL3WINDOW(3);
-		vp->available_media = inw(ioaddr + Wn3_Options);
+		vp->available_media = ioread16(ioaddr + Wn3_Options);
 		if ((vp->available_media & 0xff) == 0)		/* Broken 3c916 */
 			vp->available_media = 0x40;
-		config = inl(ioaddr + Wn3_Config);
+		config = ioread32(ioaddr + Wn3_Config);
 		if (print_info) {
 			printk(KERN_DEBUG "  Internal config register is %4.4x, "
-				   "transceivers %#x.\n", config, inw(ioaddr + Wn3_Options));
+				   "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options));
 			printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
 				   8 << RAM_SIZE(config),
 				   RAM_WIDTH(config) ? "word" : "byte",
@@ -1455,7 +1481,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		if (vp->drv_flags & EXTRA_PREAMBLE)
 			mii_preamble_required++;
 		mdio_sync(ioaddr, 32);
-		mdio_read(dev, 24, 1);
+		mdio_read(dev, 24, MII_BMSR);
 		for (phy = 0; phy < 32 && phy_idx < 1; phy++) {
 			int mii_status, phyx;
 
@@ -1469,7 +1495,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 				phyx = phy - 1;
 			else
 				phyx = phy;
-			mii_status = mdio_read(dev, phyx, 1);
+			mii_status = mdio_read(dev, phyx, MII_BMSR);
 			if (mii_status  &&  mii_status != 0xffff) {
 				vp->phys[phy_idx++] = phyx;
 				if (print_info) {
@@ -1485,7 +1511,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 			printk(KERN_WARNING"  ***WARNING*** No MII transceivers found!\n");
 			vp->phys[0] = 24;
 		} else {
-			vp->advertising = mdio_read(dev, vp->phys[0], 4);
+			vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
 			if (vp->full_duplex) {
 				/* Only advertise the FD media types. */
 				vp->advertising &= ~0x02A0;
@@ -1510,10 +1536,10 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (vp->full_bus_master_tx) {
 		dev->hard_start_xmit = boomerang_start_xmit;
 		/* Actually, it still should work with iommu. */
-		dev->features |= NETIF_F_SG;
-		if (((hw_checksums[card_idx] == -1) && (vp->drv_flags & HAS_HWCKSM)) ||
-					(hw_checksums[card_idx] == 1)) {
-				dev->features |= NETIF_F_IP_CSUM;
+		if (card_idx < MAX_UNITS &&
+		    ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) ||
+				hw_checksums[card_idx] == 1)) {
+			dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		}
 	} else {
 		dev->hard_start_xmit = vortex_start_xmit;
@@ -1555,7 +1581,7 @@ free_ring:
 						vp->rx_ring_dma);
 free_region:
 	if (vp->must_free_region)
-		release_region(ioaddr, vci->io_size);
+		release_region(dev->base_addr, vci->io_size);
 	free_netdev(dev);
 	printk(KERN_ERR PFX "vortex_probe1 fails.  Returns %d\n", retval);
 out:
@@ -1565,17 +1591,19 @@ out:
 static void
 issue_and_wait(struct net_device *dev, int cmd)
 {
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int i;
 
-	outw(cmd, dev->base_addr + EL3_CMD);
+	iowrite16(cmd, ioaddr + EL3_CMD);
 	for (i = 0; i < 2000; i++) {
-		if (!(inw(dev->base_addr + EL3_STATUS) & CmdInProgress))
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
 			return;
 	}
 
 	/* OK, that didn't work.  Do it the slow way.  One second */
 	for (i = 0; i < 100000; i++) {
-		if (!(inw(dev->base_addr + EL3_STATUS) & CmdInProgress)) {
+		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
 			if (vortex_debug > 1)
 				printk(KERN_INFO "%s: command 0x%04x took %d usecs\n",
 					   dev->name, cmd, i * 10);
@@ -1584,14 +1612,14 @@ issue_and_wait(struct net_device *dev, int cmd)
 		udelay(10);
 	}
 	printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n",
-			   dev->name, cmd, inw(dev->base_addr + EL3_STATUS));
+			   dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
 }
 
 static void
 vortex_up(struct net_device *dev)
 {
-	long ioaddr = dev->base_addr;
 	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned int config;
 	int i;
 
@@ -1604,7 +1632,7 @@ vortex_up(struct net_device *dev)
 
 	/* Before initializing select the active media port. */
 	EL3WINDOW(3);
-	config = inl(ioaddr + Wn3_Config);
+	config = ioread32(ioaddr + Wn3_Config);
 
 	if (vp->media_override != 7) {
 		printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
@@ -1651,14 +1679,14 @@ vortex_up(struct net_device *dev)
 	config = BFINS(config, dev->if_port, 20, 4);
 	if (vortex_debug > 6)
 		printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
-	outl(config, ioaddr + Wn3_Config);
+	iowrite32(config, ioaddr + Wn3_Config);
 
 	if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
 		int mii_reg1, mii_reg5;
 		EL3WINDOW(4);
 		/* Read BMSR (reg1) only to clear old status. */
-		mii_reg1 = mdio_read(dev, vp->phys[0], 1);
-		mii_reg5 = mdio_read(dev, vp->phys[0], 5);
+		mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
+		mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
 		if (mii_reg5 == 0xffff  ||  mii_reg5 == 0x0000) {
 			netif_carrier_off(dev); /* No MII device or no link partner report */
 		} else {
@@ -1679,7 +1707,7 @@ vortex_up(struct net_device *dev)
 	}
 
 	/* Set the full-duplex bit. */
-	outw(	((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+	iowrite16(	((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
 		 	(vp->large_frames ? 0x40 : 0) |
 			((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
 			ioaddr + Wn3_MAC_Ctrl);
@@ -1695,51 +1723,51 @@ vortex_up(struct net_device *dev)
 	 */
 	issue_and_wait(dev, RxReset|0x04);
 
-	outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+	iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
 
 	if (vortex_debug > 1) {
 		EL3WINDOW(4);
 		printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n",
-			   dev->name, dev->irq, inw(ioaddr + Wn4_Media));
+			   dev->name, dev->irq, ioread16(ioaddr + Wn4_Media));
 	}
 
 	/* Set the station address and mask in window 2 each time opened. */
 	EL3WINDOW(2);
 	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + i);
+		iowrite8(dev->dev_addr[i], ioaddr + i);
 	for (; i < 12; i+=2)
-		outw(0, ioaddr + i);
+		iowrite16(0, ioaddr + i);
 
 	if (vp->cb_fn_base) {
-		unsigned short n = inw(ioaddr + Wn2_ResetOptions) & ~0x4010;
+		unsigned short n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010;
 		if (vp->drv_flags & INVERT_LED_PWR)
 			n |= 0x10;
 		if (vp->drv_flags & INVERT_MII_PWR)
 			n |= 0x4000;
-		outw(n, ioaddr + Wn2_ResetOptions);
+		iowrite16(n, ioaddr + Wn2_ResetOptions);
 	}
 
 	if (dev->if_port == XCVR_10base2)
 		/* Start the thinnet transceiver. We should really wait 50ms...*/
-		outw(StartCoax, ioaddr + EL3_CMD);
+		iowrite16(StartCoax, ioaddr + EL3_CMD);
 	if (dev->if_port != XCVR_NWAY) {
 		EL3WINDOW(4);
-		outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) |
+		iowrite16((ioread16(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) |
 			 media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
 	}
 
 	/* Switch to the stats window, and clear all stats by reading. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
 	EL3WINDOW(6);
 	for (i = 0; i < 10; i++)
-		inb(ioaddr + i);
-	inw(ioaddr + 10);
-	inw(ioaddr + 12);
+		ioread8(ioaddr + i);
+	ioread16(ioaddr + 10);
+	ioread16(ioaddr + 12);
 	/* New: On the Vortex we must also clear the BadSSD counter. */
 	EL3WINDOW(4);
-	inb(ioaddr + 12);
+	ioread8(ioaddr + 12);
 	/* ..and on the Boomerang we enable the extra statistics bits. */
-	outw(0x0040, ioaddr + Wn4_NetDiag);
+	iowrite16(0x0040, ioaddr + Wn4_NetDiag);
 
 	/* Switch to register set 7 for normal use. */
 	EL3WINDOW(7);
@@ -1747,30 +1775,30 @@ vortex_up(struct net_device *dev)
 	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
 		vp->cur_rx = vp->dirty_rx = 0;
 		/* Initialize the RxEarly register as recommended. */
-		outw(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
-		outl(0x0020, ioaddr + PktStatus);
-		outl(vp->rx_ring_dma, ioaddr + UpListPtr);
+		iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
+		iowrite32(0x0020, ioaddr + PktStatus);
+		iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr);
 	}
 	if (vp->full_bus_master_tx) { 		/* Boomerang bus master Tx. */
 		vp->cur_tx = vp->dirty_tx = 0;
 		if (vp->drv_flags & IS_BOOMERANG)
-			outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
 		/* Clear the Rx, Tx rings. */
 		for (i = 0; i < RX_RING_SIZE; i++)	/* AKPM: this is done in vortex_open, too */
 			vp->rx_ring[i].status = 0;
 		for (i = 0; i < TX_RING_SIZE; i++)
 			vp->tx_skbuff[i] = NULL;
-		outl(0, ioaddr + DownListPtr);
+		iowrite32(0, ioaddr + DownListPtr);
 	}
 	/* Set receiver mode: presumably accept b-case and phys addr only. */
 	set_rx_mode(dev);
 	/* enable 802.1q tagged frames */
 	set_8021q_mode(dev, 1);
-	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+	iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
 
 //	issue_and_wait(dev, SetTxStart|0x07ff);
-	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
-	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
 	/* Allow status bits to be seen. */
 	vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete|
 		(vp->full_bus_master_tx ? DownComplete : TxAvailable) |
@@ -1780,13 +1808,13 @@ vortex_up(struct net_device *dev)
 		(vp->full_bus_master_rx ? 0 : RxComplete) |
 		StatsFull | HostError | TxComplete | IntReq
 		| (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete;
-	outw(vp->status_enable, ioaddr + EL3_CMD);
+	iowrite16(vp->status_enable, ioaddr + EL3_CMD);
 	/* Ack all pending events, and set active indicator mask. */
-	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+	iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
 		 ioaddr + EL3_CMD);
-	outw(vp->intr_enable, ioaddr + EL3_CMD);
+	iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
 	if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
-		writel(0x8000, vp->cb_fn_base + 4);
+		iowrite32(0x8000, vp->cb_fn_base + 4);
 	netif_start_queue (dev);
 }
 
@@ -1852,7 +1880,7 @@ vortex_timer(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *)data;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int next_tick = 60*HZ;
 	int ok = 0;
 	int media_status, mii_status, old_window;
@@ -1866,9 +1894,9 @@ vortex_timer(unsigned long data)
 	if (vp->medialock)
 		goto leave_media_alone;
 	disable_irq(dev->irq);
-	old_window = inw(ioaddr + EL3_CMD) >> 13;
+	old_window = ioread16(ioaddr + EL3_CMD) >> 13;
 	EL3WINDOW(4);
-	media_status = inw(ioaddr + Wn4_Media);
+	media_status = ioread16(ioaddr + Wn4_Media);
 	switch (dev->if_port) {
 	case XCVR_10baseT:  case XCVR_100baseTx:  case XCVR_100baseFx:
 		if (media_status & Media_LnkBeat) {
@@ -1888,14 +1916,17 @@ vortex_timer(unsigned long data)
 	case XCVR_MII: case XCVR_NWAY:
 		{
 			spin_lock_bh(&vp->lock);
-			mii_status = mdio_read(dev, vp->phys[0], 1);
-			mii_status = mdio_read(dev, vp->phys[0], 1);
+			mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
+			if (!(mii_status & BMSR_LSTATUS)) {
+				/* Re-read to get actual link status */
+				mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
+			}
 			ok = 1;
 			if (vortex_debug > 2)
 				printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n",
 					dev->name, mii_status);
 			if (mii_status & BMSR_LSTATUS) {
-				int mii_reg5 = mdio_read(dev, vp->phys[0], 5);
+				int mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
 				if (! vp->force_fd  &&  mii_reg5 != 0xffff) {
 					int duplex;
 
@@ -1909,7 +1940,7 @@ vortex_timer(unsigned long data)
 							vp->phys[0], mii_reg5);
 						/* Set the full-duplex bit. */
 						EL3WINDOW(3);
-						outw(	(vp->full_duplex ? 0x20 : 0) |
+						iowrite16(	(vp->full_duplex ? 0x20 : 0) |
 								(vp->large_frames ? 0x40 : 0) |
 								((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
 								ioaddr + Wn3_MAC_Ctrl);
@@ -1950,15 +1981,15 @@ vortex_timer(unsigned long data)
 					   dev->name, media_tbl[dev->if_port].name);
 			next_tick = media_tbl[dev->if_port].wait;
 		}
-		outw((media_status & ~(Media_10TP|Media_SQE)) |
+		iowrite16((media_status & ~(Media_10TP|Media_SQE)) |
 			 media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
 
 		EL3WINDOW(3);
-		config = inl(ioaddr + Wn3_Config);
+		config = ioread32(ioaddr + Wn3_Config);
 		config = BFINS(config, dev->if_port, 20, 4);
-		outl(config, ioaddr + Wn3_Config);
+		iowrite32(config, ioaddr + Wn3_Config);
 
-		outw(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
+		iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
 			 ioaddr + EL3_CMD);
 		if (vortex_debug > 1)
 			printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
@@ -1974,29 +2005,29 @@ leave_media_alone:
 
 	mod_timer(&vp->timer, RUN_AT(next_tick));
 	if (vp->deferred)
-		outw(FakeIntr, ioaddr + EL3_CMD);
+		iowrite16(FakeIntr, ioaddr + EL3_CMD);
 	return;
 }
 
 static void vortex_tx_timeout(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
-		   dev->name, inb(ioaddr + TxStatus),
-		   inw(ioaddr + EL3_STATUS));
+		   dev->name, ioread8(ioaddr + TxStatus),
+		   ioread16(ioaddr + EL3_STATUS));
 	EL3WINDOW(4);
 	printk(KERN_ERR "  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
-			inw(ioaddr + Wn4_NetDiag),
-			inw(ioaddr + Wn4_Media),
-			inl(ioaddr + PktStatus),
-			inw(ioaddr + Wn4_FIFODiag));
+			ioread16(ioaddr + Wn4_NetDiag),
+			ioread16(ioaddr + Wn4_Media),
+			ioread32(ioaddr + PktStatus),
+			ioread16(ioaddr + Wn4_FIFODiag));
 	/* Slight code bloat to be user friendly. */
-	if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
+	if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
 		printk(KERN_ERR "%s: Transmitter encountered 16 collisions --"
 			   " network cable problem?\n", dev->name);
-	if (inw(ioaddr + EL3_STATUS) & IntLatch) {
+	if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
 		printk(KERN_ERR "%s: Interrupt posted but not delivered --"
 			   " IRQ blocked by another device?\n", dev->name);
 		/* Bad idea here.. but we might as well handle a few events. */
@@ -2022,21 +2053,21 @@ static void vortex_tx_timeout(struct net_device *dev)
 	vp->stats.tx_errors++;
 	if (vp->full_bus_master_tx) {
 		printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name);
-		if (vp->cur_tx - vp->dirty_tx > 0  &&  inl(ioaddr + DownListPtr) == 0)
-			outl(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
+		if (vp->cur_tx - vp->dirty_tx > 0  &&  ioread32(ioaddr + DownListPtr) == 0)
+			iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
 				 ioaddr + DownListPtr);
 		if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE)
 			netif_wake_queue (dev);
 		if (vp->drv_flags & IS_BOOMERANG)
-			outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
-		outw(DownUnstall, ioaddr + EL3_CMD);
+			iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
+		iowrite16(DownUnstall, ioaddr + EL3_CMD);
 	} else {
 		vp->stats.tx_dropped++;
 		netif_wake_queue(dev);
 	}
 	
 	/* Issue Tx Enable */
-	outw(TxEnable, ioaddr + EL3_CMD);
+	iowrite16(TxEnable, ioaddr + EL3_CMD);
 	dev->trans_start = jiffies;
 	
 	/* Switch to register set 7 for normal use. */
@@ -2051,7 +2082,7 @@ static void
 vortex_error(struct net_device *dev, int status)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int do_tx_reset = 0, reset_mask = 0;
 	unsigned char tx_status = 0;
 
@@ -2060,7 +2091,7 @@ vortex_error(struct net_device *dev, int status)
 	}
 
 	if (status & TxComplete) {			/* Really "TxError" for us. */
-		tx_status = inb(ioaddr + TxStatus);
+		tx_status = ioread8(ioaddr + TxStatus);
 		/* Presumably a tx-timeout. We must merely re-enable. */
 		if (vortex_debug > 2
 			|| (tx_status != 0x88 && vortex_debug > 0)) {
@@ -2074,20 +2105,20 @@ vortex_error(struct net_device *dev, int status)
 		}
 		if (tx_status & 0x14)  vp->stats.tx_fifo_errors++;
 		if (tx_status & 0x38)  vp->stats.tx_aborted_errors++;
-		outb(0, ioaddr + TxStatus);
+		iowrite8(0, ioaddr + TxStatus);
 		if (tx_status & 0x30) {			/* txJabber or txUnderrun */
 			do_tx_reset = 1;
 		} else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) {	/* maxCollisions */
 			do_tx_reset = 1;
 			reset_mask = 0x0108;		/* Reset interface logic, but not download logic */
 		} else {						/* Merely re-enable the transmitter. */
-			outw(TxEnable, ioaddr + EL3_CMD);
+			iowrite16(TxEnable, ioaddr + EL3_CMD);
 		}
 	}
 
 	if (status & RxEarly) {				/* Rx early is unused. */
 		vortex_rx(dev);
-		outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+		iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD);
 	}
 	if (status & StatsFull) {			/* Empty statistics. */
 		static int DoneDidThat;
@@ -2097,29 +2128,29 @@ vortex_error(struct net_device *dev, int status)
 		/* HACK: Disable statistics as an interrupt source. */
 		/* This occurs when we have the wrong media type! */
 		if (DoneDidThat == 0  &&
-			inw(ioaddr + EL3_STATUS) & StatsFull) {
+			ioread16(ioaddr + EL3_STATUS) & StatsFull) {
 			printk(KERN_WARNING "%s: Updating statistics failed, disabling "
 				   "stats as an interrupt source.\n", dev->name);
 			EL3WINDOW(5);
-			outw(SetIntrEnb | (inw(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
+			iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
 			vp->intr_enable &= ~StatsFull;
 			EL3WINDOW(7);
 			DoneDidThat++;
 		}
 	}
 	if (status & IntReq) {		/* Restore all interrupt sources.  */
-		outw(vp->status_enable, ioaddr + EL3_CMD);
-		outw(vp->intr_enable, ioaddr + EL3_CMD);
+		iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+		iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
 	}
 	if (status & HostError) {
 		u16 fifo_diag;
 		EL3WINDOW(4);
-		fifo_diag = inw(ioaddr + Wn4_FIFODiag);
+		fifo_diag = ioread16(ioaddr + Wn4_FIFODiag);
 		printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n",
 			   dev->name, fifo_diag);
 		/* Adapter failure requires Tx/Rx reset and reinit. */
 		if (vp->full_bus_master_tx) {
-			int bus_status = inl(ioaddr + PktStatus);
+			int bus_status = ioread32(ioaddr + PktStatus);
 			/* 0x80000000 PCI master abort. */
 			/* 0x40000000 PCI target abort. */
 			if (vortex_debug)
@@ -2139,14 +2170,14 @@ vortex_error(struct net_device *dev, int status)
 			set_rx_mode(dev);
 			/* enable 802.1q VLAN tagged frames */
 			set_8021q_mode(dev, 1);
-			outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
-			outw(AckIntr | HostError, ioaddr + EL3_CMD);
+			iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+			iowrite16(AckIntr | HostError, ioaddr + EL3_CMD);
 		}
 	}
 
 	if (do_tx_reset) {
 		issue_and_wait(dev, TxReset|reset_mask);
-		outw(TxEnable, ioaddr + EL3_CMD);
+		iowrite16(TxEnable, ioaddr + EL3_CMD);
 		if (!vp->full_bus_master_tx)
 			netif_wake_queue(dev);
 	}
@@ -2156,29 +2187,29 @@ static int
 vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	/* Put out the doubleword header... */
-	outl(skb->len, ioaddr + TX_FIFO);
+	iowrite32(skb->len, ioaddr + TX_FIFO);
 	if (vp->bus_master) {
 		/* Set the bus-master controller to transfer the packet. */
 		int len = (skb->len + 3) & ~3;
-		outl(	vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
+		iowrite32(	vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE),
 				ioaddr + Wn7_MasterAddr);
-		outw(len, ioaddr + Wn7_MasterLen);
+		iowrite16(len, ioaddr + Wn7_MasterLen);
 		vp->tx_skb = skb;
-		outw(StartDMADown, ioaddr + EL3_CMD);
+		iowrite16(StartDMADown, ioaddr + EL3_CMD);
 		/* netif_wake_queue() will be called at the DMADone interrupt. */
 	} else {
 		/* ... and the packet rounded to a doubleword. */
-		outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+		iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
 		dev_kfree_skb (skb);
-		if (inw(ioaddr + TxFree) > 1536) {
+		if (ioread16(ioaddr + TxFree) > 1536) {
 			netif_start_queue (dev);	/* AKPM: redundant? */
 		} else {
 			/* Interrupt us when the FIFO has room for max-sized packet. */
 			netif_stop_queue(dev);
-			outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+			iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
 		}
 	}
 
@@ -2189,7 +2220,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		int tx_status;
 		int i = 32;
 
-		while (--i > 0	&&	(tx_status = inb(ioaddr + TxStatus)) > 0) {
+		while (--i > 0	&&	(tx_status = ioread8(ioaddr + TxStatus)) > 0) {
 			if (tx_status & 0x3C) {		/* A Tx-disabling error occurred.  */
 				if (vortex_debug > 2)
 				  printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n",
@@ -2199,9 +2230,9 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 				if (tx_status & 0x30) {
 					issue_and_wait(dev, TxReset);
 				}
-				outw(TxEnable, ioaddr + EL3_CMD);
+				iowrite16(TxEnable, ioaddr + EL3_CMD);
 			}
-			outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+			iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */
 		}
 	}
 	return 0;
@@ -2211,7 +2242,7 @@ static int
 boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	/* Calculate the next Tx descriptor entry. */
 	int entry = vp->cur_tx % TX_RING_SIZE;
 	struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE];
@@ -2275,8 +2306,8 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Wait for the stall to complete. */
 	issue_and_wait(dev, DownStall);
 	prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc));
-	if (inl(ioaddr + DownListPtr) == 0) {
-		outl(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr);
+	if (ioread32(ioaddr + DownListPtr) == 0) {
+		iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr);
 		vp->queued_packet++;
 	}
 
@@ -2291,7 +2322,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		prev_entry->status &= cpu_to_le32(~TxIntrUploaded);
 #endif
 	}
-	outw(DownUnstall, ioaddr + EL3_CMD);
+	iowrite16(DownUnstall, ioaddr + EL3_CMD);
 	spin_unlock_irqrestore(&vp->lock, flags);
 	dev->trans_start = jiffies;
 	return 0;
@@ -2310,15 +2341,15 @@ vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct net_device *dev = dev_id;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr;
+	void __iomem *ioaddr;
 	int status;
 	int work_done = max_interrupt_work;
 	int handled = 0;
 
-	ioaddr = dev->base_addr;
+	ioaddr = vp->ioaddr;
 	spin_lock(&vp->lock);
 
-	status = inw(ioaddr + EL3_STATUS);
+	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
 		printk("vortex_interrupt(). status=0x%4x\n", status);
@@ -2337,7 +2368,7 @@ vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
-			   dev->name, status, inb(ioaddr + Timer));
+			   dev->name, status, ioread8(ioaddr + Timer));
 
 	do {
 		if (vortex_debug > 5)
@@ -2350,16 +2381,16 @@ vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			if (vortex_debug > 5)
 				printk(KERN_DEBUG "	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
-			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue (dev);
 		}
 
 		if (status & DMADone) {
-			if (inw(ioaddr + Wn7_MasterStatus) & 0x1000) {
-				outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
+			if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) {
+				iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
 				pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE);
 				dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */
-				if (inw(ioaddr + TxFree) > 1536) {
+				if (ioread16(ioaddr + TxFree) > 1536) {
 					/*
 					 * AKPM: FIXME: I don't think we need this.  If the queue was stopped due to
 					 * insufficient FIFO room, the TxAvailable test will succeed and call
@@ -2367,7 +2398,7 @@ vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 					 */
 					netif_wake_queue(dev);
 				} else { /* Interrupt when FIFO has room for max-sized packet. */
-					outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+					iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
 					netif_stop_queue(dev);
 				}
 			}
@@ -2385,17 +2416,17 @@ vortex_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
-				outw(SetStatusEnb | (~vp->deferred & vp->status_enable),
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
 					 ioaddr + EL3_CMD);
-				outw(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
-			} while ((status = inw(ioaddr + EL3_CMD)) & IntLatch);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
 			/* The timer will reenable interrupts. */
 			mod_timer(&vp->timer, jiffies + 1*HZ);
 			break;
 		}
 		/* Acknowledge the IRQ. */
-		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
-	} while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
@@ -2415,11 +2446,11 @@ boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct net_device *dev = dev_id;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr;
+	void __iomem *ioaddr;
 	int status;
 	int work_done = max_interrupt_work;
 
-	ioaddr = dev->base_addr;
+	ioaddr = vp->ioaddr;
 
 	/*
 	 * It seems dopey to put the spinlock this early, but we could race against vortex_tx_timeout
@@ -2427,7 +2458,7 @@ boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 */
 	spin_lock(&vp->lock);
 
-	status = inw(ioaddr + EL3_STATUS);
+	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
 		printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status);
@@ -2448,13 +2479,13 @@ boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
-			   dev->name, status, inb(ioaddr + Timer));
+			   dev->name, status, ioread8(ioaddr + Timer));
 	do {
 		if (vortex_debug > 5)
 				printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
 					   dev->name, status);
 		if (status & UpComplete) {
-			outw(AckIntr | UpComplete, ioaddr + EL3_CMD);
+			iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
 			if (vortex_debug > 5)
 				printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n");
 			boomerang_rx(dev);
@@ -2463,11 +2494,11 @@ boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		if (status & DownComplete) {
 			unsigned int dirty_tx = vp->dirty_tx;
 
-			outw(AckIntr | DownComplete, ioaddr + EL3_CMD);
+			iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD);
 			while (vp->cur_tx - dirty_tx > 0) {
 				int entry = dirty_tx % TX_RING_SIZE;
 #if 1	/* AKPM: the latter is faster, but cyclone-only */
-				if (inl(ioaddr + DownListPtr) ==
+				if (ioread32(ioaddr + DownListPtr) ==
 					vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc))
 					break;			/* It still hasn't been processed. */
 #else
@@ -2514,20 +2545,20 @@ boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
-				outw(SetStatusEnb | (~vp->deferred & vp->status_enable),
+				iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
 					 ioaddr + EL3_CMD);
-				outw(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
-			} while ((status = inw(ioaddr + EL3_CMD)) & IntLatch);
+				iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+			} while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
 			/* The timer will reenable interrupts. */
 			mod_timer(&vp->timer, jiffies + 1*HZ);
 			break;
 		}
 		/* Acknowledge the IRQ. */
-		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+		iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
 		if (vp->cb_fn_base)			/* The PCMCIA people are idiots.  */
-			writel(0x8000, vp->cb_fn_base + 4);
+			iowrite32(0x8000, vp->cb_fn_base + 4);
 
-	} while ((status = inw(ioaddr + EL3_STATUS)) & IntLatch);
+	} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
 
 	if (vortex_debug > 4)
 		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
@@ -2540,16 +2571,16 @@ handler_exit:
 static int vortex_rx(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int i;
 	short rx_status;
 
 	if (vortex_debug > 5)
 		printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n",
-			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
-	while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
+			   ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
+	while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
 		if (rx_status & 0x4000) { /* Error, update stats. */
-			unsigned char rx_error = inb(ioaddr + RxErrors);
+			unsigned char rx_error = ioread8(ioaddr + RxErrors);
 			if (vortex_debug > 2)
 				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
 			vp->stats.rx_errors++;
@@ -2572,34 +2603,35 @@ static int vortex_rx(struct net_device *dev)
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
 				/* 'skb_put()' points to the start of sk_buff data area. */
 				if (vp->bus_master &&
-					! (inw(ioaddr + Wn7_MasterStatus) & 0x8000)) {
+					! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) {
 					dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len),
 									   pkt_len, PCI_DMA_FROMDEVICE);
-					outl(dma, ioaddr + Wn7_MasterAddr);
-					outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
-					outw(StartDMAUp, ioaddr + EL3_CMD);
-					while (inw(ioaddr + Wn7_MasterStatus) & 0x8000)
+					iowrite32(dma, ioaddr + Wn7_MasterAddr);
+					iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+					iowrite16(StartDMAUp, ioaddr + EL3_CMD);
+					while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)
 						;
 					pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE);
 				} else {
-					insl(ioaddr + RX_FIFO, skb_put(skb, pkt_len),
-						 (pkt_len + 3) >> 2);
+					ioread32_rep(ioaddr + RX_FIFO,
+					             skb_put(skb, pkt_len),
+						     (pkt_len + 3) >> 2);
 				}
-				outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+				iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
 				skb->protocol = eth_type_trans(skb, dev);
 				netif_rx(skb);
 				dev->last_rx = jiffies;
 				vp->stats.rx_packets++;
 				/* Wait a limited time to go to next packet. */
 				for (i = 200; i >= 0; i--)
-					if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+					if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
 						break;
 				continue;
 			} else if (vortex_debug > 0)
 				printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of "
 					   "size %d.\n", dev->name, pkt_len);
+			vp->stats.rx_dropped++;
 		}
-		vp->stats.rx_dropped++;
 		issue_and_wait(dev, RxDiscard);
 	}
 
@@ -2611,12 +2643,12 @@ boomerang_rx(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
 	int entry = vp->cur_rx % RX_RING_SIZE;
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int rx_status;
 	int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
 
 	if (vortex_debug > 5)
-		printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", inw(ioaddr+EL3_STATUS));
+		printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
 
 	while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
 		if (--rx_work_limit < 0)
@@ -2699,7 +2731,7 @@ boomerang_rx(struct net_device *dev)
 			vp->rx_skbuff[entry] = skb;
 		}
 		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
-		outw(UpUnstall, ioaddr + EL3_CMD);
+		iowrite16(UpUnstall, ioaddr + EL3_CMD);
 	}
 	return 0;
 }
@@ -2728,7 +2760,7 @@ static void
 vortex_down(struct net_device *dev, int final_down)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	netif_stop_queue (dev);
 
@@ -2736,26 +2768,26 @@ vortex_down(struct net_device *dev, int final_down)
 	del_timer_sync(&vp->timer);
 
 	/* Turn off statistics ASAP.  We update vp->stats below. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
+	iowrite16(StatsDisable, ioaddr + EL3_CMD);
 
 	/* Disable the receiver and transmitter. */
-	outw(RxDisable, ioaddr + EL3_CMD);
-	outw(TxDisable, ioaddr + EL3_CMD);
+	iowrite16(RxDisable, ioaddr + EL3_CMD);
+	iowrite16(TxDisable, ioaddr + EL3_CMD);
 
 	/* Disable receiving 802.1q tagged frames */
 	set_8021q_mode(dev, 0);
 
 	if (dev->if_port == XCVR_10base2)
 		/* Turn off thinnet power.  Green! */
-		outw(StopCoax, ioaddr + EL3_CMD);
+		iowrite16(StopCoax, ioaddr + EL3_CMD);
 
-	outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+	iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
 
 	update_stats(ioaddr, dev);
 	if (vp->full_bus_master_rx)
-		outl(0, ioaddr + UpListPtr);
+		iowrite32(0, ioaddr + UpListPtr);
 	if (vp->full_bus_master_tx)
-		outl(0, ioaddr + DownListPtr);
+		iowrite32(0, ioaddr + DownListPtr);
 
 	if (final_down && VORTEX_PCI(vp)) {
 		vp->pm_state_valid = 1;
@@ -2768,7 +2800,7 @@ static int
 vortex_close(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	int i;
 
 	if (netif_device_present(dev))
@@ -2776,17 +2808,18 @@ vortex_close(struct net_device *dev)
 
 	if (vortex_debug > 1) {
 		printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
-			   dev->name, inw(ioaddr + EL3_STATUS), inb(ioaddr + TxStatus));
+			   dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
 		printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d"
 			   " tx_queued %d Rx pre-checksummed %d.\n",
 			   dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
 	}
 
 #if DO_ZEROCOPY
-	if (	vp->rx_csumhits &&
-			((vp->drv_flags & HAS_HWCKSM) == 0) &&
-			(hw_checksums[vp->card_idx] == -1)) {
-		printk(KERN_WARNING "%s supports hardware checksums, and we're not using them!\n", dev->name);
+	if (vp->rx_csumhits &&
+	    (vp->drv_flags & HAS_HWCKSM) == 0 &&
+	    (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
+			printk(KERN_WARNING "%s supports hardware checksums, and we're "
+						"not using them!\n", dev->name);
 	}
 #endif
 		
@@ -2830,18 +2863,18 @@ dump_tx_ring(struct net_device *dev)
 {
 	if (vortex_debug > 0) {
 	struct vortex_private *vp = netdev_priv(dev);
-		long ioaddr = dev->base_addr;
+		void __iomem *ioaddr = vp->ioaddr;
 		
 		if (vp->full_bus_master_tx) {
 			int i;
-			int stalled = inl(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
+			int stalled = ioread32(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
 
 			printk(KERN_ERR "  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
 					vp->full_bus_master_tx,
 					vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
 					vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
 			printk(KERN_ERR "  Transmit list %8.8x vs. %p.\n",
-				   inl(ioaddr + DownListPtr),
+				   ioread32(ioaddr + DownListPtr),
 				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
 			issue_and_wait(dev, DownStall);
 			for (i = 0; i < TX_RING_SIZE; i++) {
@@ -2855,7 +2888,7 @@ dump_tx_ring(struct net_device *dev)
 					   le32_to_cpu(vp->tx_ring[i].status));
 			}
 			if (!stalled)
-				outw(DownUnstall, ioaddr + EL3_CMD);
+				iowrite16(DownUnstall, ioaddr + EL3_CMD);
 		}
 	}
 }
@@ -2863,11 +2896,12 @@ dump_tx_ring(struct net_device *dev)
 static struct net_device_stats *vortex_get_stats(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 
 	if (netif_device_present(dev)) {	/* AKPM: Used to be netif_running */
 		spin_lock_irqsave (&vp->lock, flags);
-		update_stats(dev->base_addr, dev);
+		update_stats(ioaddr, dev);
 		spin_unlock_irqrestore (&vp->lock, flags);
 	}
 	return &vp->stats;
@@ -2880,37 +2914,37 @@ static struct net_device_stats *vortex_get_stats(struct net_device *dev)
 	table.  This is done by checking that the ASM (!) code generated uses
 	atomic updates with '+='.
 	*/
-static void update_stats(long ioaddr, struct net_device *dev)
+static void update_stats(void __iomem *ioaddr, struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	int old_window = inw(ioaddr + EL3_CMD);
+	int old_window = ioread16(ioaddr + EL3_CMD);
 
 	if (old_window == 0xffff)	/* Chip suspended or ejected. */
 		return;
 	/* Unlike the 3c5x9 we need not turn off stats updates while reading. */
 	/* Switch to the stats window, and read everything. */
 	EL3WINDOW(6);
-	vp->stats.tx_carrier_errors		+= inb(ioaddr + 0);
-	vp->stats.tx_heartbeat_errors		+= inb(ioaddr + 1);
-	vp->stats.collisions			+= inb(ioaddr + 3);
-	vp->stats.tx_window_errors		+= inb(ioaddr + 4);
-	vp->stats.rx_fifo_errors		+= inb(ioaddr + 5);
-	vp->stats.tx_packets			+= inb(ioaddr + 6);
-	vp->stats.tx_packets			+= (inb(ioaddr + 9)&0x30) << 4;
-	/* Rx packets	*/			inb(ioaddr + 7);   /* Must read to clear */
+	vp->stats.tx_carrier_errors		+= ioread8(ioaddr + 0);
+	vp->stats.tx_heartbeat_errors		+= ioread8(ioaddr + 1);
+	vp->stats.collisions			+= ioread8(ioaddr + 3);
+	vp->stats.tx_window_errors		+= ioread8(ioaddr + 4);
+	vp->stats.rx_fifo_errors		+= ioread8(ioaddr + 5);
+	vp->stats.tx_packets			+= ioread8(ioaddr + 6);
+	vp->stats.tx_packets			+= (ioread8(ioaddr + 9)&0x30) << 4;
+	/* Rx packets	*/			ioread8(ioaddr + 7);   /* Must read to clear */
 	/* Don't bother with register 9, an extension of registers 6&7.
 	   If we do use the 6&7 values the atomic update assumption above
 	   is invalid. */
-	vp->stats.rx_bytes 			+= inw(ioaddr + 10);
-	vp->stats.tx_bytes 			+= inw(ioaddr + 12);
+	vp->stats.rx_bytes 			+= ioread16(ioaddr + 10);
+	vp->stats.tx_bytes 			+= ioread16(ioaddr + 12);
 	/* Extra stats for get_ethtool_stats() */
-	vp->xstats.tx_multiple_collisions	+= inb(ioaddr + 2);
-	vp->xstats.tx_deferred			+= inb(ioaddr + 8);
+	vp->xstats.tx_multiple_collisions	+= ioread8(ioaddr + 2);
+	vp->xstats.tx_deferred			+= ioread8(ioaddr + 8);
 	EL3WINDOW(4);
-	vp->xstats.rx_bad_ssd			+= inb(ioaddr + 12);
+	vp->xstats.rx_bad_ssd			+= ioread8(ioaddr + 12);
 
 	{
-		u8 up = inb(ioaddr + 13);
+		u8 up = ioread8(ioaddr + 13);
 		vp->stats.rx_bytes += (up & 0x0f) << 16;
 		vp->stats.tx_bytes += (up & 0xf0) << 12;
 	}
@@ -2922,7 +2956,7 @@ static void update_stats(long ioaddr, struct net_device *dev)
 static int vortex_nway_reset(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2936,7 +2970,7 @@ static int vortex_nway_reset(struct net_device *dev)
 static u32 vortex_get_link(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2950,7 +2984,7 @@ static u32 vortex_get_link(struct net_device *dev)
 static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2964,7 +2998,7 @@ static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 static int vortex_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int rc;
 
@@ -2994,10 +3028,11 @@ static void vortex_get_ethtool_stats(struct net_device *dev,
 	struct ethtool_stats *stats, u64 *data)
 {
 	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vp->lock, flags);
-	update_stats(dev->base_addr, dev);
+	update_stats(ioaddr, dev);
 	spin_unlock_irqrestore(&vp->lock, flags);
 
 	data[0] = vp->xstats.tx_deferred;
@@ -3047,6 +3082,7 @@ static struct ethtool_ops vortex_ethtool_ops = {
 	.set_settings           = vortex_set_settings,
 	.get_link               = vortex_get_link,
 	.nway_reset             = vortex_nway_reset,
+	.get_perm_addr			= ethtool_op_get_perm_addr,
 };
 
 #ifdef CONFIG_PCI
@@ -3057,7 +3093,7 @@ static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	int err;
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 	unsigned long flags;
 	int state = 0;
 
@@ -3085,7 +3121,8 @@ static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
    the chip has a very clean way to set the mode, unlike many others. */
 static void set_rx_mode(struct net_device *dev)
 {
-	long ioaddr = dev->base_addr;
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int new_mode;
 
 	if (dev->flags & IFF_PROMISC) {
@@ -3097,7 +3134,7 @@ static void set_rx_mode(struct net_device *dev)
 	} else
 		new_mode = SetRxFilter | RxStation | RxBroadcast;
 
-	outw(new_mode, ioaddr + EL3_CMD);
+	iowrite16(new_mode, ioaddr + EL3_CMD);
 }
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
@@ -3111,8 +3148,8 @@ static void set_rx_mode(struct net_device *dev)
 static void set_8021q_mode(struct net_device *dev, int enable)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
-	int old_window = inw(ioaddr + EL3_CMD);
+	void __iomem *ioaddr = vp->ioaddr;
+	int old_window = ioread16(ioaddr + EL3_CMD);
 	int mac_ctrl;
 
 	if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) {
@@ -3124,24 +3161,24 @@ static void set_8021q_mode(struct net_device *dev, int enable)
 			max_pkt_size += 4;	/* 802.1Q VLAN tag */
 
 		EL3WINDOW(3);
-		outw(max_pkt_size, ioaddr+Wn3_MaxPktSize);
+		iowrite16(max_pkt_size, ioaddr+Wn3_MaxPktSize);
 
 		/* set VlanEtherType to let the hardware checksumming
 		   treat tagged frames correctly */
 		EL3WINDOW(7);
-		outw(VLAN_ETHER_TYPE, ioaddr+Wn7_VlanEtherType);
+		iowrite16(VLAN_ETHER_TYPE, ioaddr+Wn7_VlanEtherType);
 	} else {
 		/* on older cards we have to enable large frames */
 
 		vp->large_frames = dev->mtu > 1500 || enable;
 
 		EL3WINDOW(3);
-		mac_ctrl = inw(ioaddr+Wn3_MAC_Ctrl);
+		mac_ctrl = ioread16(ioaddr+Wn3_MAC_Ctrl);
 		if (vp->large_frames)
 			mac_ctrl |= 0x40;
 		else
 			mac_ctrl &= ~0x40;
-		outw(mac_ctrl, ioaddr+Wn3_MAC_Ctrl);
+		iowrite16(mac_ctrl, ioaddr+Wn3_MAC_Ctrl);
 	}
 
 	EL3WINDOW(old_window);
@@ -3163,7 +3200,7 @@ static void set_8021q_mode(struct net_device *dev, int enable)
 /* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
    met by back-to-back PCI I/O cycles, but we insert a delay to avoid
    "overclocking" issues. */
-#define mdio_delay() inl(mdio_addr)
+#define mdio_delay() ioread32(mdio_addr)
 
 #define MDIO_SHIFT_CLK	0x01
 #define MDIO_DIR_WRITE	0x04
@@ -3174,15 +3211,15 @@ static void set_8021q_mode(struct net_device *dev, int enable)
 
 /* Generate the preamble required for initial synchronization and
    a few older transceivers. */
-static void mdio_sync(long ioaddr, int bits)
+static void mdio_sync(void __iomem *ioaddr, int bits)
 {
-	long mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt;
 
 	/* Establish sync by sending at least 32 logic ones. */
 	while (-- bits >= 0) {
-		outw(MDIO_DATA_WRITE1, mdio_addr);
+		iowrite16(MDIO_DATA_WRITE1, mdio_addr);
 		mdio_delay();
-		outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 }
@@ -3190,10 +3227,11 @@ static void mdio_sync(long ioaddr, int bits)
 static int mdio_read(struct net_device *dev, int phy_id, int location)
 {
 	int i;
-	long ioaddr = dev->base_addr;
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
 	unsigned int retval = 0;
-	long mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt;
 
 	if (mii_preamble_required)
 		mdio_sync(ioaddr, 32);
@@ -3201,17 +3239,17 @@ static int mdio_read(struct net_device *dev, int phy_id, int location)
 	/* Shift the read command bits out. */
 	for (i = 14; i >= 0; i--) {
 		int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
-		outw(dataval, mdio_addr);
+		iowrite16(dataval, mdio_addr);
 		mdio_delay();
-		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	/* Read the two transition, 16 data, and wire-idle bits. */
 	for (i = 19; i > 0; i--) {
-		outw(MDIO_ENB_IN, mdio_addr);
+		iowrite16(MDIO_ENB_IN, mdio_addr);
 		mdio_delay();
-		retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
-		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		retval = (retval << 1) | ((ioread16(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
+		iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff;
@@ -3219,9 +3257,10 @@ static int mdio_read(struct net_device *dev, int phy_id, int location)
 
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
 {
-	long ioaddr = dev->base_addr;
+	struct vortex_private *vp = netdev_priv(dev);
+	void __iomem *ioaddr = vp->ioaddr;
 	int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
-	long mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt;
 	int i;
 
 	if (mii_preamble_required)
@@ -3230,16 +3269,16 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val
 	/* Shift the command bits out. */
 	for (i = 31; i >= 0; i--) {
 		int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
-		outw(dataval, mdio_addr);
+		iowrite16(dataval, mdio_addr);
 		mdio_delay();
-		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	/* Leave the interface idle. */
 	for (i = 1; i >= 0; i--) {
-		outw(MDIO_ENB_IN, mdio_addr);
+		iowrite16(MDIO_ENB_IN, mdio_addr);
 		mdio_delay();
-		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
 		mdio_delay();
 	}
 	return;
@@ -3250,15 +3289,15 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val
 static void acpi_set_WOL(struct net_device *dev)
 {
 	struct vortex_private *vp = netdev_priv(dev);
-	long ioaddr = dev->base_addr;
+	void __iomem *ioaddr = vp->ioaddr;
 
 	if (vp->enable_wol) {
 		/* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */
 		EL3WINDOW(7);
-		outw(2, ioaddr + 0x0c);
+		iowrite16(2, ioaddr + 0x0c);
 		/* The RxFilter must accept the WOL frames. */
-		outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
-		outw(RxEnable, ioaddr + EL3_CMD);
+		iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
+		iowrite16(RxEnable, ioaddr + EL3_CMD);
 
 		pci_enable_wake(VORTEX_PCI(vp), 0, 1);
 
@@ -3280,10 +3319,9 @@ static void __devexit vortex_remove_one (struct pci_dev *pdev)
 
 	vp = netdev_priv(dev);
 
-	/* AKPM: FIXME: we should have
-	 *	if (vp->cb_fn_base) iounmap(vp->cb_fn_base);
-	 * here
-	 */
+	if (vp->cb_fn_base)
+		pci_iounmap(VORTEX_PCI(vp), vp->cb_fn_base);
+
 	unregister_netdev(dev);
 
 	if (VORTEX_PCI(vp)) {
@@ -3293,8 +3331,10 @@ static void __devexit vortex_remove_one (struct pci_dev *pdev)
 		pci_disable_device(VORTEX_PCI(vp));
 	}
 	/* Should really use issue_and_wait() here */
-	outw(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14),
-	     dev->base_addr + EL3_CMD);
+	iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14),
+	     vp->ioaddr + EL3_CMD);
+
+	pci_iounmap(VORTEX_PCI(vp), vp->ioaddr);
 
 	pci_free_consistent(pdev,
 						sizeof(struct boom_rx_desc) * RX_RING_SIZE
@@ -3342,7 +3382,7 @@ static int __init vortex_init (void)
 static void __exit vortex_eisa_cleanup (void)
 {
 	struct vortex_private *vp;
-	long ioaddr;
+	void __iomem *ioaddr;
 
 #ifdef CONFIG_EISA
 	/* Take care of the EISA devices */
@@ -3351,11 +3391,13 @@ static void __exit vortex_eisa_cleanup (void)
 	
 	if (compaq_net_device) {
 		vp = compaq_net_device->priv;
-		ioaddr = compaq_net_device->base_addr;
+		ioaddr = ioport_map(compaq_net_device->base_addr,
+		                    VORTEX_TOTAL_SIZE);
 
 		unregister_netdev (compaq_net_device);
-		outw (TotalReset, ioaddr + EL3_CMD);
-		release_region (ioaddr, VORTEX_TOTAL_SIZE);
+		iowrite16 (TotalReset, ioaddr + EL3_CMD);
+		release_region(compaq_net_device->base_addr,
+		               VORTEX_TOTAL_SIZE);
 
 		free_netdev (compaq_net_device);
 	}
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 85504fb900da..bd6983d1afba 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -18,8 +18,8 @@
  * Much better multiple PHY support by Magnus Damm.
  * Copyright (c) 2000 Ericsson Radio Systems AB.
  *
- * Support for FEC controller of ColdFire/5270/5271/5272/5274/5275/5280/5282.
- * Copyright (c) 2001-2004 Greg Ungerer (gerg@snapgear.com)
+ * Support for FEC controller of ColdFire processors.
+ * Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com)
  *
  * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
  * Copyright (c) 2004-2005 Macq Electronique SA.
@@ -50,7 +50,8 @@
 #include <asm/pgtable.h>
 
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
-    defined(CONFIG_M5272) || defined(CONFIG_M528x)
+    defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x)
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include "fec.h"
@@ -77,6 +78,8 @@ static unsigned int fec_hw[] = {
 	(MCF_MBAR + 0x1800),
 #elif defined(CONFIG_M523x) || defined(CONFIG_M528x)
 	(MCF_MBAR + 0x1000),
+#elif defined(CONFIG_M520x)
+	(MCF_MBAR+0x30000),
 #else
 	&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
 #endif
@@ -139,6 +142,10 @@ typedef struct {
 #define TX_RING_SIZE		16	/* Must be power of two */
 #define TX_RING_MOD_MASK	15	/*   for this to work */
 
+#if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE)
+#error "FEC: descriptor ring size contants too large"
+#endif
+
 /* Interrupt events/masks.
 */
 #define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
@@ -164,7 +171,8 @@ typedef struct {
  * size bits. Other FEC hardware does not, so we need to take that into
  * account when setting it.
  */
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x)
 #define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16)
 #else
 #define	OPT_FRAME_SIZE	0
@@ -1137,6 +1145,65 @@ static phy_info_t const phy_info_ks8721bl = {
 };
 
 /* ------------------------------------------------------------------------- */
+/* register definitions for the DP83848 */
+
+#define MII_DP8384X_PHYSTST    16  /* PHY Status Register */
+
+static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
+{
+	struct fec_enet_private *fep = dev->priv;
+	volatile uint *s = &(fep->phy_status);
+
+	*s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
+
+	/* Link up */
+	if (mii_reg & 0x0001) {
+		fep->link = 1;
+		*s |= PHY_STAT_LINK;
+	} else
+		fep->link = 0;
+	/* Status of link */
+	if (mii_reg & 0x0010)   /* Autonegotioation complete */
+		*s |= PHY_STAT_ANC;
+	if (mii_reg & 0x0002) {   /* 10MBps? */
+		if (mii_reg & 0x0004)   /* Full Duplex? */
+			*s |= PHY_STAT_10FDX;
+		else
+			*s |= PHY_STAT_10HDX;
+	} else {                  /* 100 Mbps? */
+		if (mii_reg & 0x0004)   /* Full Duplex? */
+			*s |= PHY_STAT_100FDX;
+		else
+			*s |= PHY_STAT_100HDX;
+	}
+	if (mii_reg & 0x0008)
+		*s |= PHY_STAT_FAULT;
+}
+
+static phy_info_t phy_info_dp83848= {
+	0x020005c9,
+	"DP83848",
+
+	(const phy_cmd_t []) {  /* config */
+		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
+		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+		{ mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
+		{ mk_mii_end, }
+	},
+	(const phy_cmd_t []) {  /* startup - enable interrupts */
+		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
+		{ mk_mii_end, }
+	},
+	(const phy_cmd_t []) { /* ack_int - never happens, no interrupt */
+		{ mk_mii_end, }
+	},
+	(const phy_cmd_t []) {  /* shutdown */
+		{ mk_mii_end, }
+	},
+};
+
+/* ------------------------------------------------------------------------- */
 
 static phy_info_t const * const phy_info[] = {
 	&phy_info_lxt970,
@@ -1144,6 +1211,7 @@ static phy_info_t const * const phy_info[] = {
 	&phy_info_qs6612,
 	&phy_info_am79c874,
 	&phy_info_ks8721bl,
+	&phy_info_dp83848,
 	NULL
 };
 
@@ -1422,6 +1490,134 @@ static void __inline__ fec_uncache(unsigned long addr)
 
 /* ------------------------------------------------------------------------- */
 
+#elif defined(CONFIG_M520x)
+
+/*
+ *	Code specific to Coldfire 520x
+ */
+static void __inline__ fec_request_intrs(struct net_device *dev)
+{
+	struct fec_enet_private *fep;
+	int b;
+	static const struct idesc {
+		char *name;
+		unsigned short irq;
+	} *idp, id[] = {
+		{ "fec(TXF)", 23 },
+		{ "fec(TXB)", 24 },
+		{ "fec(TXFIFO)", 25 },
+		{ "fec(TXCR)", 26 },
+		{ "fec(RXF)", 27 },
+		{ "fec(RXB)", 28 },
+		{ "fec(MII)", 29 },
+		{ "fec(LC)", 30 },
+		{ "fec(HBERR)", 31 },
+		{ "fec(GRA)", 32 },
+		{ "fec(EBERR)", 33 },
+		{ "fec(BABT)", 34 },
+		{ "fec(BABR)", 35 },
+		{ NULL },
+	};
+
+	fep = netdev_priv(dev);
+	b = 64 + 13;
+
+	/* Setup interrupt handlers. */
+	for (idp = id; idp->name; idp++) {
+		if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+			printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
+	}
+
+	/* Unmask interrupts at ColdFire interrupt controller */
+	{
+		volatile unsigned char  *icrp;
+		volatile unsigned long  *imrp;
+
+		icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
+			MCFINTC_ICR0);
+		for (b = 36; (b < 49); b++)
+			icrp[b] = 0x04;
+		imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 +
+			MCFINTC_IMRH);
+		*imrp &= ~0x0001FFF0;
+	}
+	*(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FEC) |= 0xf0;
+	*(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C) |= 0x0f;
+}
+
+static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
+{
+	volatile fec_t *fecp;
+
+	fecp = fep->hwp;
+	fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+	fecp->fec_x_cntrl = 0x00;
+
+	/*
+	 * Set MII speed to 2.5 MHz
+	 * See 5282 manual section 17.5.4.7: MSCR
+	 */
+	fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+	fecp->fec_mii_speed = fep->phy_speed;
+
+	fec_restart(dev, 0);
+}
+
+static void __inline__ fec_get_mac(struct net_device *dev)
+{
+	struct fec_enet_private *fep = netdev_priv(dev);
+	volatile fec_t *fecp;
+	unsigned char *iap, tmpaddr[ETH_ALEN];
+
+	fecp = fep->hwp;
+
+	if (FEC_FLASHMAC) {
+		/*
+		 * Get MAC address from FLASH.
+		 * If it is all 1's or 0's, use the default.
+		 */
+		iap = FEC_FLASHMAC;
+		if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
+		   (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
+			iap = fec_mac_default;
+		if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
+		   (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
+			iap = fec_mac_default;
+	} else {
+		*((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
+		*((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+		iap = &tmpaddr[0];
+	}
+
+	memcpy(dev->dev_addr, iap, ETH_ALEN);
+
+	/* Adjust MAC if using default MAC address */
+	if (iap == fec_mac_default)
+		dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+}
+
+static void __inline__ fec_enable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_disable_phy_intr(void)
+{
+}
+
+static void __inline__ fec_phy_ack_intr(void)
+{
+}
+
+static void __inline__ fec_localhw_setup(void)
+{
+}
+
+static void __inline__ fec_uncache(unsigned long addr)
+{
+}
+
+/* ------------------------------------------------------------------------- */
+
 #else
 
 /*
@@ -1952,6 +2148,14 @@ int __init fec_enet_init(struct net_device *dev)
 	if (index >= FEC_MAX_PORTS)
 		return -ENXIO;
 
+	/* Allocate memory for buffer descriptors.
+	*/
+	mem_addr = __get_free_page(GFP_KERNEL);
+	if (mem_addr == 0) {
+		printk("FEC: allocate descriptor memory failed?\n");
+		return -ENOMEM;
+	}
+
 	/* Create an Ethernet device instance.
 	*/
 	fecp = (volatile fec_t *) fec_hw[index];
@@ -1964,16 +2168,6 @@ int __init fec_enet_init(struct net_device *dev)
 	fecp->fec_ecntrl = 1;
 	udelay(10);
 
-	/* Clear and enable interrupts */
-	fecp->fec_ievent = 0xffc00000;
-	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
-		FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
-	fecp->fec_hash_table_high = 0;
-	fecp->fec_hash_table_low = 0;
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-        fecp->fec_ecntrl = 2;
-        fecp->fec_r_des_active = 0x01000000;
-
 	/* Set the Ethernet address.  If using multiple Enets on the 8xx,
 	 * this needs some work to get unique addresses.
 	 *
@@ -1982,14 +2176,6 @@ int __init fec_enet_init(struct net_device *dev)
 	 */
 	fec_get_mac(dev);
 
-	/* Allocate memory for buffer descriptors.
-	*/
-	if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) {
-		printk("FEC init error.  Need more space.\n");
-		printk("FEC initialization failed.\n");
-		return 1;
-	}
-	mem_addr = __get_free_page(GFP_KERNEL);
 	cbd_base = (cbd_t *)mem_addr;
 	/* XXX: missing check for allocation failure */
 
@@ -2067,6 +2253,16 @@ int __init fec_enet_init(struct net_device *dev)
 	*/
 	fec_request_intrs(dev);
 
+	/* Clear and enable interrupts */
+	fecp->fec_ievent = 0xffc00000;
+	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
+		FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+	fecp->fec_hash_table_high = 0;
+	fecp->fec_hash_table_low = 0;
+	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+	fecp->fec_ecntrl = 2;
+	fecp->fec_r_des_active = 0x01000000;
+
 	dev->base_addr = (unsigned long)fecp;
 
 	/* The FEC Ethernet specific entries in the device structure. */
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 045761b8a600..965c5c49fcdc 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -1,11 +1,10 @@
 /****************************************************************************/
 
 /*
- *	fec.h  --  Fast Ethernet Controller for Motorola ColdFire 5230,
- *		   5231, 5232, 5234, 5235, 5270, 5271, 5272, 5274, 5275,
- *		   5280 and 5282.
+ *	fec.h  --  Fast Ethernet Controller for Motorola ColdFire SoC
+ *		   processors.
  *
- *	(C) Copyright 2000-2003, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com)
  *	(C) Copyright 2000-2001, Lineo (www.lineo.com)
  */
 
@@ -14,7 +13,8 @@
 #define	FEC_H
 /****************************************************************************/
 
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x)
 /*
  *	Just figures, Motorola would have to change the offsets for
  *	registers in the same peripheral device on different models