wl1251: remove wl1251_ops.c

Commit "wl1251: remove wl1251_ops" originally removed file wl1251_ops.c,
but while I rebased the patch the removal got lost. Now remote the file
for real.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 729 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1251_ops.c b/drivers/net/wireless/wl12xx/wl1251_ops.c
deleted file mode 100644
index 758280af10d4..000000000000
--- a/drivers/net/wireless/wl12xx/wl1251_ops.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * This file is part of wl1251
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "wl1251_ops.h"
-#include "reg.h"
-#include "wl1251_io.h"
-#include "wl1251_spi.h"
-#include "wl1251_boot.h"
-#include "wl1251_event.h"
-#include "wl1251_acx.h"
-#include "wl1251_tx.h"
-#include "wl1251_rx.h"
-#include "wl1251_ps.h"
-#include "wl1251_init.h"
-
-static struct wl1251_partition_set wl1251_part_table[PART_TABLE_LEN] = {
-	[PART_DOWN] = {
-		.mem = {
-			.start = 0x00000000,
-			.size  = 0x00016800
-		},
-		.reg = {
-			.start = REGISTERS_BASE,
-			.size  = REGISTERS_DOWN_SIZE
-		},
-	},
-
-	[PART_WORK] = {
-		.mem = {
-			.start = 0x00028000,
-			.size  = 0x00014000
-		},
-		.reg = {
-			.start = REGISTERS_BASE,
-			.size  = REGISTERS_WORK_SIZE
-		},
-	},
-
-	/* WL1251 doesn't use the DRPW partition, so we don't set it here */
-};
-
-static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = {
-	[ACX_REG_INTERRUPT_TRIG]     = (REGISTERS_BASE + 0x0474),
-	[ACX_REG_INTERRUPT_TRIG_H]   = (REGISTERS_BASE + 0x0478),
-	[ACX_REG_INTERRUPT_MASK]     = (REGISTERS_BASE + 0x0494),
-	[ACX_REG_HINT_MASK_SET]      = (REGISTERS_BASE + 0x0498),
-	[ACX_REG_HINT_MASK_CLR]      = (REGISTERS_BASE + 0x049C),
-	[ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
-	[ACX_REG_INTERRUPT_CLEAR]    = (REGISTERS_BASE + 0x04A4),
-	[ACX_REG_INTERRUPT_ACK]      = (REGISTERS_BASE + 0x04A8),
-	[ACX_REG_SLV_SOFT_RESET]     = (REGISTERS_BASE + 0x0000),
-	[ACX_REG_EE_START]           = (REGISTERS_BASE + 0x080C),
-	[ACX_REG_ECPU_CONTROL]       = (REGISTERS_BASE + 0x0804)
-};
-
-static int wl1251_upload_firmware(struct wl1251 *wl)
-{
-	struct wl1251_partition_set *p_table = wl->chip.p_table;
-	int addr, chunk_num, partition_limit;
-	size_t fw_data_len;
-	u8 *p;
-
-	/* whal_FwCtrl_LoadFwImageSm() */
-
-	wl1251_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
-		     wl1251_reg_read32(wl, CHIP_ID_B));
-
-	/* 10.0 check firmware length and set partition */
-	fw_data_len =  (wl->fw[4] << 24) | (wl->fw[5] << 16) |
-		(wl->fw[6] << 8) | (wl->fw[7]);
-
-	wl1251_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
-		CHUNK_SIZE);
-
-	if ((fw_data_len % 4) != 0) {
-		wl1251_error("firmware length not multiple of four");
-		return -EIO;
-	}
-
-	wl1251_set_partition(wl,
-			     p_table[PART_DOWN].mem.start,
-			     p_table[PART_DOWN].mem.size,
-			     p_table[PART_DOWN].reg.start,
-			     p_table[PART_DOWN].reg.size);
-
-	/* 10.1 set partition limit and chunk num */
-	chunk_num = 0;
-	partition_limit = p_table[PART_DOWN].mem.size;
-
-	while (chunk_num < fw_data_len / CHUNK_SIZE) {
-		/* 10.2 update partition, if needed */
-		addr = p_table[PART_DOWN].mem.start +
-			(chunk_num + 2) * CHUNK_SIZE;
-		if (addr > partition_limit) {
-			addr = p_table[PART_DOWN].mem.start +
-				chunk_num * CHUNK_SIZE;
-			partition_limit = chunk_num * CHUNK_SIZE +
-				p_table[PART_DOWN].mem.size;
-			wl1251_set_partition(wl,
-					     addr,
-					     p_table[PART_DOWN].mem.size,
-					     p_table[PART_DOWN].reg.start,
-					     p_table[PART_DOWN].reg.size);
-		}
-
-		/* 10.3 upload the chunk */
-		addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
-		p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
-		wl1251_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
-			     p, addr);
-		wl1251_mem_write(wl, addr, p, CHUNK_SIZE);
-
-		chunk_num++;
-	}
-
-	/* 10.4 upload the last chunk */
-	addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
-	p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
-	wl1251_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
-		     fw_data_len % CHUNK_SIZE, p, addr);
-	wl1251_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
-
-	return 0;
-}
-
-static int wl1251_upload_nvs(struct wl1251 *wl)
-{
-	size_t nvs_len, nvs_bytes_written, burst_len;
-	int nvs_start, i;
-	u32 dest_addr, val;
-	u8 *nvs_ptr, *nvs;
-
-	nvs = wl->nvs;
-	if (nvs == NULL)
-		return -ENODEV;
-
-	nvs_ptr = nvs;
-
-	nvs_len = wl->nvs_len;
-	nvs_start = wl->fw_len;
-
-	/*
-	 * Layout before the actual NVS tables:
-	 * 1 byte : burst length.
-	 * 2 bytes: destination address.
-	 * n bytes: data to burst copy.
-	 *
-	 * This is ended by a 0 length, then the NVS tables.
-	 */
-
-	while (nvs_ptr[0]) {
-		burst_len = nvs_ptr[0];
-		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
-
-		/* We move our pointer to the data */
-		nvs_ptr += 3;
-
-		for (i = 0; i < burst_len; i++) {
-			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
-			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
-
-			wl1251_debug(DEBUG_BOOT,
-				     "nvs burst write 0x%x: 0x%x",
-				     dest_addr, val);
-			wl1251_mem_write32(wl, dest_addr, val);
-
-			nvs_ptr += 4;
-			dest_addr += 4;
-		}
-	}
-
-	/*
-	 * We've reached the first zero length, the first NVS table
-	 * is 7 bytes further.
-	 */
-	nvs_ptr += 7;
-	nvs_len -= nvs_ptr - nvs;
-	nvs_len = ALIGN(nvs_len, 4);
-
-	/* Now we must set the partition correctly */
-	wl1251_set_partition(wl, nvs_start,
-			     wl->chip.p_table[PART_DOWN].mem.size,
-			     wl->chip.p_table[PART_DOWN].reg.start,
-			     wl->chip.p_table[PART_DOWN].reg.size);
-
-	/* And finally we upload the NVS tables */
-	nvs_bytes_written = 0;
-	while (nvs_bytes_written < nvs_len) {
-		val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
-		       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
-
-		val = cpu_to_le32(val);
-
-		wl1251_debug(DEBUG_BOOT,
-			     "nvs write table 0x%x: 0x%x",
-			     nvs_start, val);
-		wl1251_mem_write32(wl, nvs_start, val);
-
-		nvs_ptr += 4;
-		nvs_bytes_written += 4;
-		nvs_start += 4;
-	}
-
-	return 0;
-}
-
-static int wl1251_boot(struct wl1251 *wl)
-{
-	int ret = 0, minor_minor_e2_ver;
-	u32 tmp, boot_data;
-
-	ret = wl1251_boot_soft_reset(wl);
-	if (ret < 0)
-		goto out;
-
-	/* 2. start processing NVS file */
-	ret = wl->chip.op_upload_nvs(wl);
-	if (ret < 0)
-		goto out;
-
-	/* write firmware's last address (ie. it's length) to
-	 * ACX_EEPROMLESS_IND_REG */
-	wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
-
-	/* 6. read the EEPROM parameters */
-	tmp = wl1251_reg_read32(wl, SCR_PAD2);
-
-	/* 7. read bootdata */
-	wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
-	wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
-	tmp = wl1251_reg_read32(wl, SCR_PAD3);
-
-	/* 8. check bootdata and call restart sequence */
-	wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
-	minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
-
-	wl1251_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
-		     "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
-		     wl->boot_attr.radio_type, wl->boot_attr.major,
-		     wl->boot_attr.minor, minor_minor_e2_ver);
-
-	ret = wl1251_boot_init_seq(wl);
-	if (ret < 0)
-		goto out;
-
-	/* 9. NVS processing done */
-	boot_data = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
-
-	wl1251_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
-
-	/* 10. check that ECPU_CONTROL_HALT bits are set in
-	 * pWhalBus->uBootData and start uploading firmware
-	 */
-	if ((boot_data & ECPU_CONTROL_HALT) == 0) {
-		wl1251_error("boot failed, ECPU_CONTROL_HALT not set");
-		ret = -EIO;
-		goto out;
-	}
-
-	ret = wl->chip.op_upload_fw(wl);
-	if (ret < 0)
-		goto out;
-
-	/* 10.5 start firmware */
-	ret = wl1251_boot_run_firmware(wl);
-	if (ret < 0)
-		goto out;
-
-out:
-	return ret;
-}
-
-static int wl1251_mem_cfg(struct wl1251 *wl)
-{
-	struct wl1251_acx_config_memory *mem_conf;
-	int ret, i;
-
-	wl1251_debug(DEBUG_ACX, "wl1251 mem cfg");
-
-	mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL);
-	if (!mem_conf) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/* memory config */
-	mem_conf->mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
-	mem_conf->mem_config.rx_mem_block_num = 35;
-	mem_conf->mem_config.tx_min_mem_block_num = 64;
-	mem_conf->mem_config.num_tx_queues = MAX_TX_QUEUES;
-	mem_conf->mem_config.host_if_options = HOSTIF_PKT_RING;
-	mem_conf->mem_config.num_ssid_profiles = 1;
-	mem_conf->mem_config.debug_buffer_size =
-		cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
-
-	/* RX queue config */
-	mem_conf->rx_queue_config.dma_address = 0;
-	mem_conf->rx_queue_config.num_descs = ACX_RX_DESC_DEF;
-	mem_conf->rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
-	mem_conf->rx_queue_config.type = DEFAULT_RXQ_TYPE;
-
-	/* TX queue config */
-	for (i = 0; i < MAX_TX_QUEUES; i++) {
-		mem_conf->tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
-		mem_conf->tx_queue_config[i].attributes = i;
-	}
-
-	ret = wl1251_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
-				   sizeof(*mem_conf));
-	if (ret < 0) {
-		wl1251_warning("wl1251 mem config failed: %d", ret);
-		goto out;
-	}
-
-out:
-	kfree(mem_conf);
-	return ret;
-}
-
-static int wl1251_hw_init_mem_config(struct wl1251 *wl)
-{
-	int ret;
-
-	ret = wl1251_mem_cfg(wl);
-	if (ret < 0)
-		return ret;
-
-	wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
-					  GFP_KERNEL);
-	if (!wl->target_mem_map) {
-		wl1251_error("couldn't allocate target memory map");
-		return -ENOMEM;
-	}
-
-	/* we now ask for the firmware built memory map */
-	ret = wl1251_acx_mem_map(wl, wl->target_mem_map,
-				 sizeof(struct wl1251_acx_mem_map));
-	if (ret < 0) {
-		wl1251_error("couldn't retrieve firmware memory map");
-		kfree(wl->target_mem_map);
-		wl->target_mem_map = NULL;
-		return ret;
-	}
-
-	return 0;
-}
-
-static void wl1251_set_ecpu_ctrl(struct wl1251 *wl, u32 flag)
-{
-	u32 cpu_ctrl;
-
-	/* 10.5.0 run the firmware (I) */
-	cpu_ctrl = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
-
-	/* 10.5.1 run the firmware (II) */
-	cpu_ctrl &= ~flag;
-	wl1251_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
-}
-
-static void wl1251_target_enable_interrupts(struct wl1251 *wl)
-{
-	/* Enable target's interrupts */
-	wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
-		WL1251_ACX_INTR_RX1_DATA |
-		WL1251_ACX_INTR_TX_RESULT |
-		WL1251_ACX_INTR_EVENT_A |
-		WL1251_ACX_INTR_EVENT_B |
-		WL1251_ACX_INTR_INIT_COMPLETE;
-	wl1251_boot_target_enable_interrupts(wl);
-}
-
-static void wl1251_fw_version(struct wl1251 *wl)
-{
-	wl1251_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver));
-}
-
-static void wl1251_irq_work(struct work_struct *work)
-{
-	u32 intr;
-	struct wl1251 *wl =
-		container_of(work, struct wl1251, irq_work);
-	int ret;
-
-	mutex_lock(&wl->mutex);
-
-	wl1251_debug(DEBUG_IRQ, "IRQ work");
-
-	if (wl->state == WL1251_STATE_OFF)
-		goto out;
-
-	ret = wl1251_ps_elp_wakeup(wl);
-	if (ret < 0)
-		goto out;
-
-	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
-
-	intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
-	wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);
-
-	if (wl->data_path) {
-		wl->rx_counter =
-			wl1251_mem_read32(wl, wl->data_path->rx_control_addr);
-
-		/* We handle a firmware bug here */
-		switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
-		case 0:
-			wl1251_debug(DEBUG_IRQ, "RX: FW and host in sync");
-			intr &= ~WL1251_ACX_INTR_RX0_DATA;
-			intr &= ~WL1251_ACX_INTR_RX1_DATA;
-			break;
-		case 1:
-			wl1251_debug(DEBUG_IRQ, "RX: FW +1");
-			intr |= WL1251_ACX_INTR_RX0_DATA;
-			intr &= ~WL1251_ACX_INTR_RX1_DATA;
-			break;
-		case 2:
-			wl1251_debug(DEBUG_IRQ, "RX: FW +2");
-			intr |= WL1251_ACX_INTR_RX0_DATA;
-			intr |= WL1251_ACX_INTR_RX1_DATA;
-			break;
-		default:
-			wl1251_warning("RX: FW and host out of sync: %d",
-				       wl->rx_counter - wl->rx_handled);
-			break;
-		}
-
-		wl->rx_handled = wl->rx_counter;
-
-
-		wl1251_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
-	}
-
-	intr &= wl->intr_mask;
-
-	if (intr == 0) {
-		wl1251_debug(DEBUG_IRQ, "INTR is 0");
-		wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
-				   ~(wl->intr_mask));
-
-		goto out_sleep;
-	}
-
-	if (intr & WL1251_ACX_INTR_RX0_DATA) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
-		wl1251_rx(wl);
-	}
-
-	if (intr & WL1251_ACX_INTR_RX1_DATA) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
-		wl1251_rx(wl);
-	}
-
-	if (intr & WL1251_ACX_INTR_TX_RESULT) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
-		wl1251_tx_complete(wl);
-	}
-
-	if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
-		if (intr & WL1251_ACX_INTR_EVENT_A)
-			wl1251_event_handle(wl, 0);
-		else
-			wl1251_event_handle(wl, 1);
-	}
-
-	if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
-
-	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
-
-out_sleep:
-	wl1251_ps_elp_sleep(wl);
-
-out:
-	mutex_unlock(&wl->mutex);
-}
-
-static int wl1251_hw_init_txq_fill(u8 qid,
-				   struct acx_tx_queue_qos_config *config,
-				   u32 num_blocks)
-{
-	config->qid = qid;
-
-	switch (qid) {
-	case QOS_AC_BE:
-		config->high_threshold =
-			(QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
-		config->low_threshold =
-			(QOS_TX_LOW_BE_DEF * num_blocks) / 100;
-		break;
-	case QOS_AC_BK:
-		config->high_threshold =
-			(QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
-		config->low_threshold =
-			(QOS_TX_LOW_BK_DEF * num_blocks) / 100;
-		break;
-	case QOS_AC_VI:
-		config->high_threshold =
-			(QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
-		config->low_threshold =
-			(QOS_TX_LOW_VI_DEF * num_blocks) / 100;
-		break;
-	case QOS_AC_VO:
-		config->high_threshold =
-			(QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
-		config->low_threshold =
-			(QOS_TX_LOW_VO_DEF * num_blocks) / 100;
-		break;
-	default:
-		wl1251_error("Invalid TX queue id: %d", qid);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl)
-{
-	struct acx_tx_queue_qos_config *config;
-	struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
-	int ret, i;
-
-	wl1251_debug(DEBUG_ACX, "acx tx queue config");
-
-	config = kzalloc(sizeof(*config), GFP_KERNEL);
-	if (!config) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	for (i = 0; i < MAX_NUM_OF_AC; i++) {
-		ret = wl1251_hw_init_txq_fill(i, config,
-					      wl_mem_map->num_tx_mem_blocks);
-		if (ret < 0)
-			goto out;
-
-		ret = wl1251_cmd_configure(wl, ACX_TX_QUEUE_CFG,
-					   config, sizeof(*config));
-		if (ret < 0)
-			goto out;
-	}
-
-out:
-	kfree(config);
-	return ret;
-}
-
-static int wl1251_hw_init_data_path_config(struct wl1251 *wl)
-{
-	int ret;
-
-	/* asking for the data path parameters */
-	wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
-				GFP_KERNEL);
-	if (!wl->data_path) {
-		wl1251_error("Couldn't allocate data path parameters");
-		return -ENOMEM;
-	}
-
-	ret = wl1251_acx_data_path_params(wl, wl->data_path);
-	if (ret < 0) {
-		kfree(wl->data_path);
-		wl->data_path = NULL;
-		return ret;
-	}
-
-	return 0;
-}
-
-static int wl1251_hw_init(struct wl1251 *wl)
-{
-	struct wl1251_acx_mem_map *wl_mem_map;
-	int ret;
-
-	ret = wl1251_hw_init_hwenc_config(wl);
-	if (ret < 0)
-		return ret;
-
-	/* Template settings */
-	ret = wl1251_hw_init_templates_config(wl);
-	if (ret < 0)
-		return ret;
-
-	/* Default memory configuration */
-	ret = wl1251_hw_init_mem_config(wl);
-	if (ret < 0)
-		return ret;
-
-	/* Default data path configuration  */
-	ret = wl1251_hw_init_data_path_config(wl);
-	if (ret < 0)
-		goto out_free_memmap;
-
-	/* RX config */
-	ret = wl1251_hw_init_rx_config(wl,
-				       RX_CFG_PROMISCUOUS | RX_CFG_TSF,
-				       RX_FILTER_OPTION_DEF);
-	/* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
-	   RX_FILTER_OPTION_FILTER_ALL); */
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* TX queues config */
-	ret = wl1251_hw_init_tx_queue_config(wl);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* PHY layer config */
-	ret = wl1251_hw_init_phy_config(wl);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* Beacon filtering */
-	ret = wl1251_hw_init_beacon_filter(wl);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* Bluetooth WLAN coexistence */
-	ret = wl1251_hw_init_pta(wl);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* Energy detection */
-	ret = wl1251_hw_init_energy_detection(wl);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* Beacons and boradcast settings */
-	ret = wl1251_hw_init_beacon_broadcast(wl);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* Enable data path */
-	ret = wl1251_cmd_data_path(wl, wl->channel, 1);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	/* Default power state */
-	ret = wl1251_hw_init_power_auth(wl);
-	if (ret < 0)
-		goto out_free_data_path;
-
-	wl_mem_map = wl->target_mem_map;
-	wl1251_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
-		    wl_mem_map->num_tx_mem_blocks,
-		    wl->data_path->tx_control_addr,
-		    wl_mem_map->num_rx_mem_blocks,
-		    wl->data_path->rx_control_addr);
-
-	return 0;
-
- out_free_data_path:
-	kfree(wl->data_path);
-
- out_free_memmap:
-	kfree(wl->target_mem_map);
-
-	return ret;
-}
-
-static int wl1251_plt_init(struct wl1251 *wl)
-{
-	int ret;
-
-	ret = wl1251_hw_init_mem_config(wl);
-	if (ret < 0)
-		return ret;
-
-	ret = wl1251_cmd_data_path(wl, wl->channel, 1);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-void wl1251_setup(struct wl1251 *wl)
-{
-	/* FIXME: Is it better to use strncpy here or is this ok? */
-	wl->chip.fw_filename = WL1251_FW_NAME;
-	wl->chip.nvs_filename = WL1251_NVS_NAME;
-
-	/* Now we know what chip we're using, so adjust the power on sleep
-	 * time accordingly */
-	wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP;
-
-	wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE;
-	wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE;
-
-	wl->chip.op_upload_nvs = wl1251_upload_nvs;
-	wl->chip.op_upload_fw = wl1251_upload_firmware;
-	wl->chip.op_boot = wl1251_boot;
-	wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl;
-	wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts;
-	wl->chip.op_hw_init = wl1251_hw_init;
-	wl->chip.op_plt_init = wl1251_plt_init;
-	wl->chip.op_fw_version = wl1251_fw_version;
-	wl->chip.op_tx_flush = wl1251_tx_flush;
-	wl->chip.op_cmd_join = wl1251_cmd_join;
-
-	wl->chip.p_table = wl1251_part_table;
-	wl->chip.acx_reg_table = wl1251_acx_reg_table;
-
-	INIT_WORK(&wl->irq_work, wl1251_irq_work);
-	INIT_WORK(&wl->tx_work, wl1251_tx_work);
-
-}