net: phy: add Lynx PCS module

Add a Lynx PCS module which exposes the necessary operations to drive
the PCS using phylink.

The majority of the code is extracted from the Felix DSA driver, which
will be also modified in a later patch, and exposed as a separate module
for code reusability purposes.
As such, this aims at feature and bug parity with the existing Felix DSA
driver, and thus USXGMII, SGMII, QSGMII and 2500Base-X (only w/o in-band
AN) are supported by the Lynx PCS module since these were also supported
by Felix.

The module can only be enabled by the drivers in need and not user
selectable.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 319 insertions, 0 deletions

diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig
index 9d6e2be32060..074fb3f5db18 100644
--- a/drivers/net/pcs/Kconfig
+++ b/drivers/net/pcs/Kconfig
@@ -13,4 +13,10 @@ config PCS_XPCS
 	  This module provides helper functions for Synopsys DesignWare XPCS
 	  controllers.
 
+config PCS_LYNX
+	tristate
+	help
+	  This module provides helpers to phylink for managing the Lynx PCS
+	  which is part of the Layerscape and QorIQ Ethernet SERDES.
+
 endmenu
diff --git a/drivers/net/pcs/Makefile b/drivers/net/pcs/Makefile
index f0480afc7157..c23146755972 100644
--- a/drivers/net/pcs/Makefile
+++ b/drivers/net/pcs/Makefile
@@ -2,3 +2,4 @@
 # Makefile for Linux PCS drivers
 
 obj-$(CONFIG_PCS_XPCS)		+= pcs-xpcs.o
+obj-$(CONFIG_PCS_LYNX)		+= pcs-lynx.o
diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
new file mode 100644
index 000000000000..c43d97682083
--- /dev/null
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright 2020 NXP
+ * Lynx PCS MDIO helpers
+ */
+
+#include <linux/mdio.h>
+#include <linux/phylink.h>
+#include <linux/pcs-lynx.h>
+
+#define SGMII_CLOCK_PERIOD_NS		8 /* PCS is clocked at 125 MHz */
+#define LINK_TIMER_VAL(ns)		((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
+
+#define SGMII_AN_LINK_TIMER_NS		1600000 /* defined by SGMII spec */
+
+#define LINK_TIMER_LO			0x12
+#define LINK_TIMER_HI			0x13
+#define IF_MODE				0x14
+#define IF_MODE_SGMII_EN		BIT(0)
+#define IF_MODE_USE_SGMII_AN		BIT(1)
+#define IF_MODE_SPEED(x)		(((x) << 2) & GENMASK(3, 2))
+#define IF_MODE_SPEED_MSK		GENMASK(3, 2)
+#define IF_MODE_HALF_DUPLEX		BIT(4)
+
+enum sgmii_speed {
+	SGMII_SPEED_10		= 0,
+	SGMII_SPEED_100		= 1,
+	SGMII_SPEED_1000	= 2,
+	SGMII_SPEED_2500	= 2,
+};
+
+#define phylink_pcs_to_lynx(pl_pcs) container_of((pl_pcs), struct lynx_pcs, pcs)
+
+static void lynx_pcs_get_state_usxgmii(struct mdio_device *pcs,
+				       struct phylink_link_state *state)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	int status, lpa;
+
+	status = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_BMSR);
+	if (status < 0)
+		return;
+
+	state->link = !!(status & MDIO_STAT1_LSTATUS);
+	state->an_complete = !!(status & MDIO_AN_STAT1_COMPLETE);
+	if (!state->link || !state->an_complete)
+		return;
+
+	lpa = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_LPA);
+	if (lpa < 0)
+		return;
+
+	phylink_decode_usxgmii_word(state, lpa);
+}
+
+static void lynx_pcs_get_state_2500basex(struct mdio_device *pcs,
+					 struct phylink_link_state *state)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	int bmsr, lpa;
+
+	bmsr = mdiobus_read(bus, addr, MII_BMSR);
+	lpa = mdiobus_read(bus, addr, MII_LPA);
+	if (bmsr < 0 || lpa < 0) {
+		state->link = false;
+		return;
+	}
+
+	state->link = !!(bmsr & BMSR_LSTATUS);
+	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
+	if (!state->link)
+		return;
+
+	state->speed = SPEED_2500;
+	state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+	state->duplex = DUPLEX_FULL;
+}
+
+static void lynx_pcs_get_state(struct phylink_pcs *pcs,
+			       struct phylink_link_state *state)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (state->interface) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		phylink_mii_c22_pcs_get_state(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		lynx_pcs_get_state_2500basex(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		lynx_pcs_get_state_usxgmii(lynx->mdio, state);
+		break;
+	default:
+		break;
+	}
+
+	dev_dbg(&lynx->mdio->dev,
+		"mode=%s/%s/%s link=%u an_enabled=%u an_complete=%u\n",
+		phy_modes(state->interface),
+		phy_speed_to_str(state->speed),
+		phy_duplex_to_str(state->duplex),
+		state->link, state->an_enabled, state->an_complete);
+}
+
+static int lynx_pcs_config_sgmii(struct mdio_device *pcs, unsigned int mode,
+				 const unsigned long *advertising)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	u16 if_mode;
+	int err;
+
+	if_mode = IF_MODE_SGMII_EN;
+	if (mode == MLO_AN_INBAND) {
+		u32 link_timer;
+
+		if_mode |= IF_MODE_USE_SGMII_AN;
+
+		/* Adjust link timer for SGMII */
+		link_timer = LINK_TIMER_VAL(SGMII_AN_LINK_TIMER_NS);
+		mdiobus_write(bus, addr, LINK_TIMER_LO, link_timer & 0xffff);
+		mdiobus_write(bus, addr, LINK_TIMER_HI, link_timer >> 16);
+	}
+	err = mdiobus_modify(bus, addr, IF_MODE,
+			     IF_MODE_SGMII_EN | IF_MODE_USE_SGMII_AN,
+			     if_mode);
+	if (err)
+		return err;
+
+	return phylink_mii_c22_pcs_config(pcs, mode, PHY_INTERFACE_MODE_SGMII,
+					 advertising);
+}
+
+static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
+				   const unsigned long *advertising)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+
+	if (!phylink_autoneg_inband(mode)) {
+		dev_err(&pcs->dev, "USXGMII only supports in-band AN for now\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* Configure device ability for the USXGMII Replicator */
+	return mdiobus_c45_write(bus, addr, MDIO_MMD_VEND2, MII_ADVERTISE,
+				 MDIO_USXGMII_10G | MDIO_USXGMII_LINK |
+				 MDIO_USXGMII_FULL_DUPLEX |
+				 ADVERTISE_SGMII | ADVERTISE_LPACK);
+}
+
+static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+			   phy_interface_t ifmode,
+			   const unsigned long *advertising,
+			   bool permit)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (ifmode) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		return lynx_pcs_config_sgmii(lynx->mdio, mode, advertising);
+	case PHY_INTERFACE_MODE_2500BASEX:
+		if (phylink_autoneg_inband(mode)) {
+			dev_err(&lynx->mdio->dev,
+				"AN not supported on 3.125GHz SerDes lane\n");
+			return -EOPNOTSUPP;
+		}
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		return lynx_pcs_config_usxgmii(lynx->mdio, mode, advertising);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
+				   int speed, int duplex)
+{
+	struct mii_bus *bus = pcs->bus;
+	u16 if_mode = 0, sgmii_speed;
+	int addr = pcs->addr;
+
+	/* The PCS needs to be configured manually only
+	 * when not operating on in-band mode
+	 */
+	if (mode == MLO_AN_INBAND)
+		return;
+
+	if (duplex == DUPLEX_HALF)
+		if_mode |= IF_MODE_HALF_DUPLEX;
+
+	switch (speed) {
+	case SPEED_1000:
+		sgmii_speed = SGMII_SPEED_1000;
+		break;
+	case SPEED_100:
+		sgmii_speed = SGMII_SPEED_100;
+		break;
+	case SPEED_10:
+		sgmii_speed = SGMII_SPEED_10;
+		break;
+	case SPEED_UNKNOWN:
+		/* Silently don't do anything */
+		return;
+	default:
+		dev_err(&pcs->dev, "Invalid PCS speed %d\n", speed);
+		return;
+	}
+	if_mode |= IF_MODE_SPEED(sgmii_speed);
+
+	mdiobus_modify(bus, addr, IF_MODE,
+		       IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
+		       if_mode);
+}
+
+/* 2500Base-X is SerDes protocol 7 on Felix and 6 on ENETC. It is a SerDes lane
+ * clocked at 3.125 GHz which encodes symbols with 8b/10b and does not have
+ * auto-negotiation of any link parameters. Electrically it is compatible with
+ * a single lane of XAUI.
+ * The hardware reference manual wants to call this mode SGMII, but it isn't
+ * really, since the fundamental features of SGMII:
+ * - Downgrading the link speed by duplicating symbols
+ * - Auto-negotiation
+ * are not there.
+ * The speed is configured at 1000 in the IF_MODE because the clock frequency
+ * is actually given by a PLL configured in the Reset Configuration Word (RCW).
+ * Since there is no difference between fixed speed SGMII w/o AN and 802.3z w/o
+ * AN, we call this PHY interface type 2500Base-X. In case a PHY negotiates a
+ * lower link speed on line side, the system-side interface remains fixed at
+ * 2500 Mbps and we do rate adaptation through pause frames.
+ */
+static void lynx_pcs_link_up_2500basex(struct mdio_device *pcs,
+				       unsigned int mode,
+				       int speed, int duplex)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	u16 if_mode = 0;
+
+	if (mode == MLO_AN_INBAND) {
+		dev_err(&pcs->dev, "AN not supported for 2500BaseX\n");
+		return;
+	}
+
+	if (duplex == DUPLEX_HALF)
+		if_mode |= IF_MODE_HALF_DUPLEX;
+	if_mode |= IF_MODE_SPEED(SGMII_SPEED_2500);
+
+	mdiobus_modify(bus, addr, IF_MODE,
+		       IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
+		       if_mode);
+}
+
+static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+			     phy_interface_t interface,
+			     int speed, int duplex)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		lynx_pcs_link_up_sgmii(lynx->mdio, mode, speed, duplex);
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		lynx_pcs_link_up_2500basex(lynx->mdio, mode, speed, duplex);
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		/* At the moment, only in-band AN is supported for USXGMII
+		 * so nothing to do in link_up
+		 */
+		break;
+	default:
+		break;
+	}
+}
+
+static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
+	.pcs_get_state = lynx_pcs_get_state,
+	.pcs_config = lynx_pcs_config,
+	.pcs_link_up = lynx_pcs_link_up,
+};
+
+struct lynx_pcs *lynx_pcs_create(struct mdio_device *mdio)
+{
+	struct lynx_pcs *lynx_pcs;
+
+	lynx_pcs = kzalloc(sizeof(*lynx_pcs), GFP_KERNEL);
+	if (!lynx_pcs)
+		return NULL;
+
+	lynx_pcs->mdio = mdio;
+	lynx_pcs->pcs.ops = &lynx_pcs_phylink_ops;
+	lynx_pcs->pcs.poll = true;
+
+	return lynx_pcs;
+}
+EXPORT_SYMBOL(lynx_pcs_create);
+
+void lynx_pcs_destroy(struct lynx_pcs *pcs)
+{
+	kfree(pcs);
+}
+EXPORT_SYMBOL(lynx_pcs_destroy);
+
+MODULE_LICENSE("Dual BSD/GPL");