iwlwifi: allow probe-after-rx on 2.4 GHz

There are two passive 2.4 GHz channels: 12 and 13.
If you have a hidden SSID on those, you will not
be able to connect to it because we don't send out
probe requests there. We can allow this by using
the firmware's probe-after-rx functionality on
those channels as well.

This fixes
https://bugzilla.kernel.org/show_bug.cgi?id=16462

Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

2 files changed, 28 insertions, 28 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index c1a389883af0..b555edd53354 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1447,35 +1447,35 @@ int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 		if (priv->cfg->bt_params &&
 		    priv->cfg->bt_params->advanced_bt_coexist)
 			scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
-		scan->good_CRC_th = IWL_GOOD_CRC_TH_DISABLED;
 		break;
 	case IEEE80211_BAND_5GHZ:
 		rate = IWL_RATE_6M_PLCP;
-		/*
-		 * If active scanning is requested but a certain channel is
-		 * marked passive, we can do active scanning if we detect
-		 * transmissions.
-		 *
-		 * There is an issue with some firmware versions that triggers
-		 * a sysassert on a "good CRC threshold" of zero (== disabled),
-		 * on a radar channel even though this means that we should NOT
-		 * send probes.
-		 *
-		 * The "good CRC threshold" is the number of frames that we
-		 * need to receive during our dwell time on a channel before
-		 * sending out probes -- setting this to a huge value will
-		 * mean we never reach it, but at the same time work around
-		 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
-		 * here instead of IWL_GOOD_CRC_TH_DISABLED.
-		 */
-		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
-						IWL_GOOD_CRC_TH_NEVER;
 		break;
 	default:
 		IWL_WARN(priv, "Invalid scan band\n");
 		return -EIO;
 	}
 
+	/*
+	 * If active scanning is requested but a certain channel is
+	 * marked passive, we can do active scanning if we detect
+	 * transmissions.
+	 *
+	 * There is an issue with some firmware versions that triggers
+	 * a sysassert on a "good CRC threshold" of zero (== disabled),
+	 * on a radar channel even though this means that we should NOT
+	 * send probes.
+	 *
+	 * The "good CRC threshold" is the number of frames that we
+	 * need to receive during our dwell time on a channel before
+	 * sending out probes -- setting this to a huge value will
+	 * mean we never reach it, but at the same time work around
+	 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
+	 * here instead of IWL_GOOD_CRC_TH_DISABLED.
+	 */
+	scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+					IWL_GOOD_CRC_TH_NEVER;
+
 	band = priv->scan_band;
 
 	if (priv->cfg->scan_rx_antennas[band])
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 980c6096620a..3ee3e55fa546 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2938,18 +2938,10 @@ int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	case IEEE80211_BAND_2GHZ:
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 		scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
-		scan->good_CRC_th = 0;
 		band = IEEE80211_BAND_2GHZ;
 		break;
 	case IEEE80211_BAND_5GHZ:
 		scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
-		/*
-		 * If active scaning is requested but a certain channel
-		 * is marked passive, we can do active scanning if we
-		 * detect transmissions.
-		 */
-		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
-						IWL_GOOD_CRC_TH_DISABLED;
 		band = IEEE80211_BAND_5GHZ;
 		break;
 	default:
@@ -2957,6 +2949,14 @@ int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 		return -EIO;
 	}
 
+	/*
+	 * If active scaning is requested but a certain channel
+	 * is marked passive, we can do active scanning if we
+	 * detect transmissions.
+	 */
+	scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+					IWL_GOOD_CRC_TH_DISABLED;
+
 	if (!priv->is_internal_short_scan) {
 		scan->tx_cmd.len = cpu_to_le16(
 			iwl_fill_probe_req(priv,