diff options
| author | Prashant Sreedharan <prashant@broadcom.com> | 2014-12-20 12:16:17 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2014-12-22 16:13:32 -0500 |
| commit | 05b0aa579397b734f127af58e401a30784a1e315 (patch) | |
| tree | cc04caa1fe6c084f79694fb0814a1da2902c0af5 /drivers/net | |
| parent | 6d08acd2d32e3e877579315dc3202d7a5f336d98 (diff) | |
tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts
During driver load in tg3_init_one, if the driver detects DMA activity before
intializing the chip tg3_halt is called. As part of tg3_halt interrupts are
disabled using routine tg3_disable_ints. This routine was using mailbox value
which was not initialized (default value is 0). As a result driver was writing
0x00000001 to pci config space register 0, which is the vendor id / device id.
This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only
the Vendor ID to identify Configuration Request Retry). Also this issue is only
seen in older generation chipsets like 5722 because config space write to offset
0 from driver is possible. The newer generation chips ignore writes to offset 0.
Also without commit a7877b17a667, for these older chips when a GRC reset is
issued the Bootcode would reprogram the vendor id/device id, which is the reason
this bug was masked earlier.
Fixed by initializing the interrupt mailbox registers before calling tg3_halt.
Please queue for -stable.
Reported-by: Nils Holland <nholland@tisys.org>
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/broadcom/tg3.c | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index bb48a610b72a..553dcd8a9df2 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17800,23 +17800,6 @@ static int tg3_init_one(struct pci_dev *pdev, goto err_out_apeunmap; } - /* - * Reset chip in case UNDI or EFI driver did not shutdown - * DMA self test will enable WDMAC and we'll see (spurious) - * pending DMA on the PCI bus at that point. - */ - if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || - (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { - tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - } - - err = tg3_test_dma(tp); - if (err) { - dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); - goto err_out_apeunmap; - } - intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW; rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW; sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW; @@ -17861,6 +17844,23 @@ static int tg3_init_one(struct pci_dev *pdev, sndmbx += 0xc; } + /* + * Reset chip in case UNDI or EFI driver did not shutdown + * DMA self test will enable WDMAC and we'll see (spurious) + * pending DMA on the PCI bus at that point. + */ + if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || + (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { + tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + } + + err = tg3_test_dma(tp); + if (err) { + dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); + goto err_out_apeunmap; + } + tg3_init_coal(tp); pci_set_drvdata(pdev, dev); |