diff options
| author | Sujith Manoharan <c_manoha@qca.qualcomm.com> | 2013-08-04 14:21:59 +0530 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2013-08-05 14:52:43 -0400 |
| commit | d7150908248bc76eff48c16045802c7f0b1cfd74 (patch) | |
| tree | 3913ffa6ba896a067caf849f9049262a0e0c62b7 /drivers/net/wireless | |
| parent | a5354ccaaf54ac61c6d1b350e8d3e4234dd28849 (diff) | |
ath9k: Program HW for WB195 diversity
The MC_GAIN_CTL/CCK_DETECT registers have to be programmed
with the correct configuration values if WLAN/BT RX diversity
is enabled. Add this and also take care of the BTCOEX mode
when fast diversity is enabled/disabled.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9002_phy.c | 60 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9002_phy.h | 6 |
2 files changed, 66 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index f4003512d8d5..456d8b917396 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -555,6 +555,65 @@ static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); } +static void ar9002_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) +{ + struct ath_btcoex_hw *btcoex = &ah->btcoex_hw; + u8 antdiv_ctrl1, antdiv_ctrl2; + u32 regval; + + if (enable) { + antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_ENABLE; + antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_ENABLE; + + /* + * Don't disable BT ant to allow BB to control SWCOM. + */ + btcoex->bt_coex_mode2 &= (~(AR_BT_DISABLE_BT_ANT)); + REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2); + + REG_WRITE(ah, AR_PHY_SWITCH_COM, ATH_BT_COEX_ANT_DIV_SWITCH_COM); + REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000); + } else { + /* + * Disable antenna diversity, use LNA1 only. + */ + antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_FIXED_A; + antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_FIXED_A; + + /* + * Disable BT Ant. to allow concurrent BT and WLAN receive. + */ + btcoex->bt_coex_mode2 |= AR_BT_DISABLE_BT_ANT; + REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2); + + /* + * Program SWCOM table to make sure RF switch always parks + * at BT side. + */ + REG_WRITE(ah, AR_PHY_SWITCH_COM, 0); + REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000); + } + + regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL); + regval &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL)); + /* + * Clear ant_fast_div_bias [14:9] since for WB195, + * the main LNA is always LNA1. + */ + regval &= (~(AR_PHY_9285_FAST_DIV_BIAS)); + regval |= SM(antdiv_ctrl1, AR_PHY_9285_ANT_DIV_CTL); + regval |= SM(antdiv_ctrl2, AR_PHY_9285_ANT_DIV_ALT_LNACONF); + regval |= SM((antdiv_ctrl2 >> 2), AR_PHY_9285_ANT_DIV_MAIN_LNACONF); + regval |= SM((antdiv_ctrl1 >> 1), AR_PHY_9285_ANT_DIV_ALT_GAINTB); + regval |= SM((antdiv_ctrl1 >> 2), AR_PHY_9285_ANT_DIV_MAIN_GAINTB); + REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); + + regval = REG_READ(ah, AR_PHY_CCK_DETECT); + regval &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); + regval |= SM((antdiv_ctrl1 >> 3), AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); + REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); +} + static void ar9002_hw_spectral_scan_config(struct ath_hw *ah, struct ath_spec_scan *param) { @@ -630,6 +689,7 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah) ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get; ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set; + ops->set_bt_ant_diversity = ar9002_hw_set_bt_ant_diversity; ops->spectral_scan_config = ar9002_hw_spectral_scan_config; ops->spectral_scan_trigger = ar9002_hw_spectral_scan_trigger; ops->spectral_scan_wait = ar9002_hw_spectral_scan_wait; diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.h b/drivers/net/wireless/ath/ath9k/ar9002_phy.h index d3f09287d1d0..6314ae2e93e3 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.h @@ -320,6 +320,12 @@ #define AR_PHY_9285_ANT_DIV_GAINTB_0 0 #define AR_PHY_9285_ANT_DIV_GAINTB_1 1 +#define ATH_BT_COEX_ANTDIV_CONTROL1_ENABLE 0x0b +#define ATH_BT_COEX_ANTDIV_CONTROL2_ENABLE 0x09 +#define ATH_BT_COEX_ANTDIV_CONTROL1_FIXED_A 0x04 +#define ATH_BT_COEX_ANTDIV_CONTROL2_FIXED_A 0x09 +#define ATH_BT_COEX_ANT_DIV_SWITCH_COM 0x66666666 + #define AR_PHY_EXT_CCA0 0x99b8 #define AR_PHY_EXT_CCA0_THRESH62 0x000000FF #define AR_PHY_EXT_CCA0_THRESH62_S 0 |