rsi: handle BT traffic in driver

BT frames are passed through coex and hal modules to BUS.
After firmware is loaded, based on the operating mode CARD
READY frame comes for each protocol. When BT card ready is
received, BT attach is called.
Protocol operations are exchanged between the modules
at initialization time.
Build flag CONFIG_RSI_COEX is introduced to enable coex support
if CONFIG_BT_RSIHCI is enabled. Coex operations are valid if
coex mode is greater than 1 only.

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 39 insertions, 0 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
index 151d228a6167..de608ae365a4 100644
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/firmware.h>
+#include <net/bluetooth/bluetooth.h>
 #include "rsi_mgmt.h"
 #include "rsi_hal.h"
 #include "rsi_sdio.h"
@@ -24,6 +25,7 @@
 static struct ta_metadata metadata_flash_content[] = {
 	{"flash_content", 0x00010000},
 	{"rsi/rs9113_wlan_qspi.rps", 0x00010000},
+	{"rsi/rs9113_wlan_bt_dual_mode.rps", 0x00010000},
 };
 
 int rsi_send_pkt_to_bus(struct rsi_common *common, struct sk_buff *skb)
@@ -357,6 +359,43 @@ err:
 	return status;
 }
 
+int rsi_send_bt_pkt(struct rsi_common *common, struct sk_buff *skb)
+{
+	int status = -EINVAL;
+	u8 header_size = 0;
+	struct rsi_bt_desc *bt_desc;
+	u8 queueno = ((skb->data[1] >> 4) & 0xf);
+
+	if (queueno == RSI_BT_MGMT_Q) {
+		status = rsi_send_pkt_to_bus(common, skb);
+		if (status)
+			rsi_dbg(ERR_ZONE, "%s: Failed to write bt mgmt pkt\n",
+				__func__);
+		goto out;
+	}
+	header_size = FRAME_DESC_SZ;
+	if (header_size > skb_headroom(skb)) {
+		rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__);
+		status = -ENOSPC;
+		goto out;
+	}
+	skb_push(skb, header_size);
+	memset(skb->data, 0, header_size);
+	bt_desc = (struct rsi_bt_desc *)skb->data;
+
+	rsi_set_len_qno(&bt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
+			RSI_BT_DATA_Q);
+	bt_desc->bt_pkt_type = cpu_to_le16(bt_cb(skb)->pkt_type);
+
+	status = rsi_send_pkt_to_bus(common, skb);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Failed to write bt pkt\n", __func__);
+
+out:
+	dev_kfree_skb(skb);
+	return status;
+}
+
 int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb)
 {
 	struct rsi_hw *adapter = (struct rsi_hw *)common->priv;