rtw88: Enable 802.11ac beamformee support

Enable MU-MIMO transmit beamformee support for chipset 8822b and 8822c.

If the driver is in station mode and associated with an AP, and the
capabilities of both meet the requirement of beamforming, driver will
run as a beamformee and the corresponding chip settings will be set.

In addition, module parameter support_bf is added to enable or disable
beamforming. Sometimes driver will need to disable for inter-operate
issues, and it would be easier for driver to debug.

Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 59 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 21c2d9e651fe..ae4417d6c272 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -14,6 +14,7 @@
 #include "reg.h"
 #include "debug.h"
 #include "util.h"
+#include "bf.h"
 
 static void rtw8822c_config_trx_mode(struct rtw_dev *rtwdev, u8 tx_path,
 				     u8 rx_path, bool is_tx2_path);
@@ -1068,6 +1069,8 @@ static void rtw8822c_phy_set_param(struct rtw_dev *rtwdev)
 
 	rtw8822c_rf_init(rtwdev);
 	rtw8822c_pwrtrack_init(rtwdev);
+
+	rtw_bf_phy_init(rtwdev);
 }
 
 #define WLAN_TXQ_RPT_EN		0x1F
@@ -2078,6 +2081,57 @@ static void rtw8822c_coex_cfg_wl_rx_gain(struct rtw_dev *rtwdev, bool low_gain)
 	}
 }
 
+static void rtw8822c_bf_enable_bfee_su(struct rtw_dev *rtwdev,
+				       struct rtw_vif *vif,
+				       struct rtw_bfee *bfee)
+{
+	u8 csi_rsc = 0;
+	u32 tmp6dc;
+
+	rtw_bf_enable_bfee_su(rtwdev, vif, bfee);
+
+	tmp6dc = rtw_read32(rtwdev, REG_BBPSF_CTRL) |
+			    BIT_WMAC_USE_NDPARATE |
+			    (csi_rsc << 13);
+	if (vif->net_type == RTW_NET_AP_MODE)
+		rtw_write32(rtwdev, REG_BBPSF_CTRL, tmp6dc | BIT(12));
+	else
+		rtw_write32(rtwdev, REG_BBPSF_CTRL, tmp6dc & ~BIT(12));
+
+	rtw_write32(rtwdev, REG_CSI_RRSR, 0x550);
+}
+
+static void rtw8822c_bf_config_bfee_su(struct rtw_dev *rtwdev,
+				       struct rtw_vif *vif,
+				       struct rtw_bfee *bfee, bool enable)
+{
+	if (enable)
+		rtw8822c_bf_enable_bfee_su(rtwdev, vif, bfee);
+	else
+		rtw_bf_remove_bfee_su(rtwdev, bfee);
+}
+
+static void rtw8822c_bf_config_bfee_mu(struct rtw_dev *rtwdev,
+				       struct rtw_vif *vif,
+				       struct rtw_bfee *bfee, bool enable)
+{
+	if (enable)
+		rtw_bf_enable_bfee_mu(rtwdev, vif, bfee);
+	else
+		rtw_bf_remove_bfee_mu(rtwdev, bfee);
+}
+
+static void rtw8822c_bf_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
+				    struct rtw_bfee *bfee, bool enable)
+{
+	if (bfee->role == RTW_BFEE_SU)
+		rtw8822c_bf_config_bfee_su(rtwdev, vif, bfee, enable);
+	else if (bfee->role == RTW_BFEE_MU)
+		rtw8822c_bf_config_bfee_mu(rtwdev, vif, bfee, enable);
+	else
+		rtw_warn(rtwdev, "wrong bfee role\n");
+}
+
 struct dpk_cfg_pair {
 	u32 addr;
 	u32 bitmask;
@@ -3678,6 +3732,9 @@ static struct rtw_chip_ops rtw8822c_ops = {
 	.phy_calibration	= rtw8822c_phy_calibration,
 	.cck_pd_set		= rtw8822c_phy_cck_pd_set,
 	.pwr_track		= rtw8822c_pwr_track,
+	.config_bfee		= rtw8822c_bf_config_bfee,
+	.set_gid_table		= rtw_bf_set_gid_table,
+	.cfg_csi_rate		= rtw_bf_cfg_csi_rate,
 
 	.coex_set_init		= rtw8822c_coex_cfg_init,
 	.coex_set_ant_switch	= NULL,
@@ -3998,6 +4055,8 @@ struct rtw_chip_info rtw8822c_hw_spec = {
 	.dpd_ratemask = DIS_DPD_RATEALL,
 	.pwr_track_tbl = &rtw8822c_rtw_pwr_track_tbl,
 	.iqk_threshold = 8,
+	.bfer_su_max_num = 2,
+	.bfer_mu_max_num = 1,
 
 	.coex_para_ver = 0x19062706,
 	.bt_desired_ver = 0x6,