rtlwifi: btcoexist control to enter/leave LPS

To yield better user experience, have btcoex control LPS's parameters.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 55 insertions, 8 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
index 488376becdcb..a37eb27cefe6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c
@@ -240,24 +240,71 @@ void rtl8723be_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode)
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	u8 u1_h2c_set_pwrmode[H2C_PWEMODE_LENGTH] = { 0 };
 	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
-	u8 rlbm, power_state = 0, byte5 = 0x40;
+	u8 rlbm, power_state = 0, byte5 = 0;
+	u8 awake_intvl;	/* DTIM = (awake_intvl - 1) */
 	struct rtl_btc_ops *btc_ops = rtlpriv->btcoexist.btc_ops;
+	bool bt_ctrl_lps = (rtlpriv->cfg->ops->get_btc_status() ?
+			    btc_ops->btc_is_bt_ctrl_lps(rtlpriv) : false);
 
-	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "FW LPS mode = %d\n", mode);
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "FW LPS mode = %d (coex:%d)\n",
+		 mode, bt_ctrl_lps);
+
+	switch (mode) {
+	case FW_PS_MIN_MODE:
+		rlbm = 0;
+		awake_intvl = 2;
+		break;
+	case FW_PS_MAX_MODE:
+		rlbm = 1;
+		awake_intvl = 2;
+		break;
+	case FW_PS_DTIM_MODE:
+		rlbm = 2;
+		awake_intvl = ppsc->reg_max_lps_awakeintvl;
+		/* hw->conf.ps_dtim_period or mac->vif->bss_conf.dtim_period
+		 * is only used in swlps.
+		 */
+		break;
+	default:
+		rlbm = 2;
+		awake_intvl = 4;
+		break;
+	}
+
+	if (rtlpriv->mac80211.p2p) {
+		awake_intvl = 2;
+		rlbm = 1;
+	}
+
+	if (mode == FW_PS_ACTIVE_MODE) {
+		byte5 = 0x40;
+		power_state = FW_PWR_STATE_ACTIVE;
+	} else {
+		if (bt_ctrl_lps) {
+			byte5 = btc_ops->btc_get_lps_val(rtlpriv);
+			power_state = btc_ops->btc_get_rpwm_val(rtlpriv);
+
+			if ((rlbm == 2) && (byte5 & BIT(4))) {
+				/* Keep awake interval to 1 to prevent from
+				 * decreasing coex performance
+				 */
+				awake_intvl = 2;
+				rlbm = 2;
+			}
+		} else {
+			byte5 = 0x40;
+			power_state = FW_PWR_STATE_RF_OFF;
+		}
+	}
 
 	SET_H2CCMD_PWRMODE_PARM_MODE(u1_h2c_set_pwrmode, ((mode) ? 1 : 0));
-	rlbm = 0;/*YJ,temp,120316. FW now not support RLBM=2.*/
 	SET_H2CCMD_PWRMODE_PARM_RLBM(u1_h2c_set_pwrmode, rlbm);
 	SET_H2CCMD_PWRMODE_PARM_SMART_PS(u1_h2c_set_pwrmode,
 					 (rtlpriv->mac80211.p2p) ?
 					  ppsc->smart_ps : 1);
 	SET_H2CCMD_PWRMODE_PARM_AWAKE_INTERVAL(u1_h2c_set_pwrmode,
-					       ppsc->reg_max_lps_awakeintvl);
+					       awake_intvl);
 	SET_H2CCMD_PWRMODE_PARM_ALL_QUEUE_UAPSD(u1_h2c_set_pwrmode, 0);
-	if (mode == FW_PS_ACTIVE_MODE)
-		power_state |= FW_PWR_STATE_ACTIVE;
-	else
-		power_state |= FW_PWR_STATE_RF_OFF;
 	SET_H2CCMD_PWRMODE_PARM_PWR_STATE(u1_h2c_set_pwrmode, power_state);
 	SET_H2CCMD_PWRMODE_PARM_BYTE5(u1_h2c_set_pwrmode, byte5);