Merge tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.11

First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.

Major changes:

rtw88
 * major bluetooth co-existance improvements
wilc1000
 * Wi-Fi Multimedia (WMM) support
ath11k
 * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
   probe response support
 * qcom,ath11k-calibration-variant Device Tree setting
 * cold boot calibration support
 * new DFS region: JP
wnc36xx
 * enable connection monitoring and keepalive in firmware
ath10k
 * firmware IRAM recovery feature
mhi
 * merge mhi-ath11k-immutable branch to make MHI API change go smoothly

* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
  wl1251: remove trailing semicolon in macro definition
  airo: remove trailing semicolon in macro definition
  wilc1000: added queue support for WMM
  wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
  wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
  wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
  wilc1000: added 'ndo_set_mac_address' callback support
  brcmfmac: expose firmware config files through modinfo
  wlcore: Switch to using the new API kobj_to_dev()
  rtw88: coex: add feature to enhance HID coexistence performance
  rtw88: coex: upgrade coexistence A2DP mechanism
  rtw88: coex: add action for coexistence in hardware initial
  rtw88: coex: add function to avoid cck lock
  rtw88: coex: change the coexistence mechanism for WLAN connected
  rtw88: coex: change the coexistence mechanism for HID
  rtw88: coex: update AFH information while in free-run mode
  rtw88: coex: update the mechanism for A2DP + PAN
  rtw88: coex: add debug message
  rtw88: coex: run coexistence when WLAN entering/leaving LPS
  Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
  ...
====================

Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

6 files changed, 33 insertions, 17 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index f9ebb98b0e3c..ce8c102df7b3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -367,7 +367,7 @@ static int mmc_submit_one(struct mmc_data *md, struct mmc_request *mr,
  * @func: SDIO function
  * @write: direction flag
  * @addr: dongle memory address as source/destination
- * @pkt: skb pointer
+ * @pktlist: skb buffer head pointer
  *
  * This function takes the respbonsibility as the interface function to MMC
  * stack for block data access. It assumes that the skb passed down by the
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index a2dbbb977d0c..0ee421f30aa2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -2137,7 +2137,8 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
 				    BRCMF_WSEC_MAX_PSK_LEN);
 	else if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE) {
 		/* clean up user-space RSNE */
-		if (brcmf_fil_iovar_data_set(ifp, "wpaie", NULL, 0)) {
+		err = brcmf_fil_iovar_data_set(ifp, "wpaie", NULL, 0);
+		if (err) {
 			bphy_err(drvr, "failed to clean up user-space RSNE\n");
 			goto done;
 		}
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
index 430d2cca98b3..bc3f4e4edcdf 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
@@ -384,6 +384,7 @@ int brcmf_fweh_activate_events(struct brcmf_if *ifp)
  * @drvr: driver information object.
  * @event_packet: event packet to process.
  * @packet_len: length of the packet
+ * @gfp: memory allocation flags.
  *
  * If the packet buffer contains a firmware event message it will
  * dispatch the event to a registered handler (using worker).
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 39381cbde89e..45bc502fcb34 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -759,6 +759,7 @@ static void brcmf_pcie_bus_console_init(struct brcmf_pciedev_info *devinfo)
 /**
  * brcmf_pcie_bus_console_read - reads firmware messages
  *
+ * @devinfo: pointer to the device data structure
  * @error: specifies if error has occurred (prints messages unconditionally)
  */
 static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo,
@@ -1936,16 +1937,18 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	fwreq = brcmf_pcie_prepare_fw_request(devinfo);
 	if (!fwreq) {
 		ret = -ENOMEM;
-		goto fail_bus;
+		goto fail_brcmf;
 	}
 
 	ret = brcmf_fw_get_firmwares(bus->dev, fwreq, brcmf_pcie_setup);
 	if (ret < 0) {
 		kfree(fwreq);
-		goto fail_bus;
+		goto fail_brcmf;
 	}
 	return 0;
 
+fail_brcmf:
+	brcmf_free(&devinfo->pdev->dev);
 fail_bus:
 	kfree(bus->msgbuf);
 	kfree(bus);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 99987a789e7e..16ed325795a8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -625,6 +625,10 @@ BRCMF_FW_DEF(4359, "brcmfmac4359-sdio");
 BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
 BRCMF_FW_DEF(43012, "brcmfmac43012-sdio");
 
+/* firmware config files */
+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcm/brcmfmac*-sdio.*.txt");
+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcm/brcmfmac*-pcie.*.txt");
+
 static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
 	BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
 	BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0),
@@ -1340,7 +1344,7 @@ static void brcmf_sdio_free_glom(struct brcmf_sdio *bus)
 static inline u8 brcmf_sdio_getdatoffset(u8 *swheader)
 {
 	u32 hdrvalue;
-	hdrvalue = *(u32 *)swheader;
+	hdrvalue = le32_to_cpu(*(__le32 *)swheader);
 	return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT);
 }
 
@@ -1349,7 +1353,7 @@ static inline bool brcmf_sdio_fromevntchan(u8 *swheader)
 	u32 hdrvalue;
 	u8 ret;
 
-	hdrvalue = *(u32 *)swheader;
+	hdrvalue = le32_to_cpu(*(__le32 *)swheader);
 	ret = (u8)((hdrvalue & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT);
 
 	return (ret == SDPCM_EVENT_CHANNEL);
@@ -3517,6 +3521,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	struct brcmf_sdio *bus = sdiodev->bus;
 	struct brcmf_core *core = bus->sdio_core;
 	u32 value;
+	__le32 iovar;
 	int err;
 
 	/* maxctl provided by common layer */
@@ -3537,16 +3542,16 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	 */
 	if (core->rev < 12) {
 		/* for sdio core rev < 12, disable txgloming */
-		value = 0;
-		err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
-					   sizeof(u32));
+		iovar = 0;
+		err = brcmf_iovar_data_set(dev, "bus:txglom", &iovar,
+					   sizeof(iovar));
 	} else {
 		/* otherwise, set txglomalign */
 		value = sdiodev->settings->bus.sdio.sd_sgentry_align;
 		/* SDIO ADMA requires at least 32 bit alignment */
-		value = max_t(u32, value, ALIGNMENT);
-		err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
-					   sizeof(u32));
+		iovar = cpu_to_le32(max_t(u32, value, ALIGNMENT));
+		err = brcmf_iovar_data_set(dev, "bus:txglomalign", &iovar,
+					   sizeof(iovar));
 	}
 
 	if (err < 0)
@@ -3555,9 +3560,9 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
 	if (sdiodev->sg_support) {
 		bus->txglom = false;
-		value = 1;
+		iovar = cpu_to_le32(1);
 		err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
-					   &value, sizeof(u32));
+					   &iovar, sizeof(iovar));
 		if (err < 0) {
 			/* bus:rxglom is allowed to fail */
 			err = 0;
@@ -4541,6 +4546,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 		brcmf_sdiod_intr_unregister(bus->sdiodev);
 
 		brcmf_detach(bus->sdiodev->dev);
+		brcmf_free(bus->sdiodev->dev);
 
 		cancel_work_sync(&bus->datawork);
 		if (bus->brcmf_wq)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c
index c9fb4b0cffaf..2631eb7569eb 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c
@@ -942,14 +942,19 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
 		index = TX_SEQ_TO_INDEX(seq);
 		ack_recd = false;
 		if (ba_recd) {
+			int block_acked;
+
 			bindex = MODSUB_POW2(seq, start_seq, SEQNUM_MAX);
+			if (bindex < AMPDU_TX_BA_MAX_WSIZE)
+				block_acked = isset(bitmap, bindex);
+			else
+				block_acked = 0;
 			brcms_dbg_ht(wlc->hw->d11core,
 				     "tid %d seq %d, start_seq %d, bindex %d set %d, index %d\n",
 				     tid, seq, start_seq, bindex,
-				     isset(bitmap, bindex), index);
+				     block_acked, index);
 			/* if acked then clear bit and free packet */
-			if ((bindex < AMPDU_TX_BA_MAX_WSIZE)
-			    && isset(bitmap, bindex)) {
+			if (block_acked) {
 				ini->txretry[index] = 0;
 
 				/*