wil6210: add support for device led configuration

Add the ability to configure the device led to be used for notifying
the AP activity (60G device supports leds 0-2).
The host can also configure the blinking frequency of the led in
three states.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 77 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 2e347efc39d8..b80c5d850e1e 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -32,6 +32,11 @@ module_param(agg_wsize, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(agg_wsize, " Window size for Tx Block Ack after connect;"
 		 " 0 - use default; < 0 - don't auto-establish");
 
+u8 led_id = WIL_LED_INVALID_ID;
+module_param(led_id, byte, S_IRUGO);
+MODULE_PARM_DESC(led_id,
+		 " 60G device led enablement. Set the led ID (0-2) to enable");
+
 /**
  * WMI event receiving - theory of operations
  *
@@ -94,6 +99,14 @@ const struct fw_map fw_mapping[] = {
 	 */
 };
 
+struct blink_on_off_time led_blink_time[] = {
+	{WIL_LED_BLINK_ON_SLOW_MS, WIL_LED_BLINK_OFF_SLOW_MS},
+	{WIL_LED_BLINK_ON_MED_MS, WIL_LED_BLINK_OFF_MED_MS},
+	{WIL_LED_BLINK_ON_FAST_MS, WIL_LED_BLINK_OFF_FAST_MS},
+};
+
+u8 led_polarity = LED_POLARITY_LOW_ACTIVE;
+
 /**
  * return AHB address for given firmware/ucode internal (linker) address
  * @x - internal address
@@ -971,6 +984,60 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
 	return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
 }
 
+int wmi_led_cfg(struct wil6210_priv *wil, bool enable)
+{
+	int rc = 0;
+	struct wmi_led_cfg_cmd cmd = {
+		.led_mode = enable,
+		.id = led_id,
+		.slow_blink_cfg.blink_on =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].on_ms),
+		.slow_blink_cfg.blink_off =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_SLOW].off_ms),
+		.medium_blink_cfg.blink_on =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].on_ms),
+		.medium_blink_cfg.blink_off =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_MED].off_ms),
+		.fast_blink_cfg.blink_on =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].on_ms),
+		.fast_blink_cfg.blink_off =
+			cpu_to_le32(led_blink_time[WIL_LED_TIME_FAST].off_ms),
+		.led_polarity = led_polarity,
+	};
+	struct {
+		struct wmi_cmd_hdr wmi;
+		struct wmi_led_cfg_done_event evt;
+	} __packed reply;
+
+	if (led_id == WIL_LED_INVALID_ID)
+		goto out;
+
+	if (led_id > WIL_LED_MAX_ID) {
+		wil_err(wil, "Invalid led id %d\n", led_id);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	wil_dbg_wmi(wil,
+		    "%s led %d\n",
+		    enable ? "enabling" : "disabling", led_id);
+
+	rc = wmi_call(wil, WMI_LED_CFG_CMDID, &cmd, sizeof(cmd),
+		      WMI_LED_CFG_DONE_EVENTID, &reply, sizeof(reply),
+		      100);
+	if (rc)
+		goto out;
+
+	if (reply.evt.status) {
+		wil_err(wil, "led %d cfg failed with status %d\n",
+			led_id, le32_to_cpu(reply.evt.status));
+		rc = -EINVAL;
+	}
+
+out:
+	return rc;
+}
+
 int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
 		  u8 chan, u8 hidden_ssid, u8 is_go)
 {
@@ -1013,11 +1080,21 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
 	if (reply.evt.status != WMI_FW_STATUS_SUCCESS)
 		rc = -EINVAL;
 
+	if (wmi_nettype != WMI_NETTYPE_P2P)
+		/* Don't fail due to error in the led configuration */
+		wmi_led_cfg(wil, true);
+
 	return rc;
 }
 
 int wmi_pcp_stop(struct wil6210_priv *wil)
 {
+	int rc;
+
+	rc = wmi_led_cfg(wil, false);
+	if (rc)
+		return rc;
+
 	return wmi_call(wil, WMI_PCP_STOP_CMDID, NULL, 0,
 			WMI_PCP_STOPPED_EVENTID, NULL, 0, 20);
 }