ath9k_hw: Add MCI related changes in chip reset

here we check for BT state and if BT calibration has started,
give 25ms for BT Calibration to finish. we also take care of 2G/5G
switch and LNA transfer incase WLAN is operating in 5G. in case the BT
state is awake when we do WLAN calibration re-calibrate and we reset
the message exchange between WLAN and BT. BT is given preference when
simultaneous CAL request happens. calibration for WLAN/BT is done
assuming that the other co-existing module is in awake state, if not
we continue to do calibration while if the other module's state changes
we need to do restart the calibration handshake

Cc: Wilson Tsao <wtsao@qca.qualcomm.com>
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 132 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 1d71d1ba202c..e2860d7cd684 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1514,6 +1514,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   struct ath9k_hw_cal_data *caldata, bool bChannelChange)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
 	u32 saveLedState;
 	struct ath9k_channel *curchan = ah->curchan;
 	u32 saveDefAntenna;
@@ -1521,6 +1522,53 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	u64 tsf = 0;
 	int i, r;
 	bool allow_fbs = false;
+	bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
+	bool save_fullsleep = ah->chip_fullsleep;
+
+	if (mci) {
+
+		ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan));
+
+		if (mci_hw->bt_state == MCI_BT_CAL_START) {
+			u32 payload[4] = {0, 0, 0, 0};
+
+			ath_dbg(common, ATH_DBG_MCI, "MCI stop rx for BT CAL");
+
+			mci_hw->bt_state = MCI_BT_CAL;
+
+			/*
+			 * MCI FIX: disable mci interrupt here. This is to avoid
+			 * SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and
+			 * lead to mci_intr reentry.
+			 */
+
+			ar9003_mci_disable_interrupt(ah);
+
+			ath_dbg(common, ATH_DBG_MCI, "send WLAN_CAL_GRANT");
+			MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT);
+			ar9003_mci_send_message(ah, MCI_GPM, 0, payload,
+						16, true, false);
+
+			ath_dbg(common, ATH_DBG_MCI, "\nMCI BT is calibrating");
+
+			/* Wait BT calibration to be completed for 25ms */
+
+			if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE,
+								  0, 25000))
+				ath_dbg(common, ATH_DBG_MCI,
+					"MCI got BT_CAL_DONE\n");
+			else
+				ath_dbg(common, ATH_DBG_MCI,
+					"MCI ### BT cal takes to long, force"
+					"bt_state to be bt_awake\n");
+			mci_hw->bt_state = MCI_BT_AWAKE;
+			/* MCI FIX: enable mci interrupt here */
+			ar9003_mci_enable_interrupt(ah);
+
+			return true;
+		}
+	}
+
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
@@ -1558,12 +1606,29 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		if (ath9k_hw_channel_change(ah, chan)) {
 			ath9k_hw_loadnf(ah, ah->curchan);
 			ath9k_hw_start_nfcal(ah, true);
+			if (mci && mci_hw->ready)
+				ar9003_mci_2g5g_switch(ah, true);
+
 			if (AR_SREV_9271(ah))
 				ar9002_hw_load_ani_reg(ah, chan);
 			return 0;
 		}
 	}
 
+	if (mci) {
+		ar9003_mci_disable_interrupt(ah);
+
+		if (mci_hw->ready && !save_fullsleep) {
+			ar9003_mci_mute_bt(ah);
+			udelay(20);
+			REG_WRITE(ah, AR_BTCOEX_CTRL, 0);
+		}
+
+		mci_hw->bt_state = MCI_BT_SLEEP;
+		mci_hw->ready = false;
+	}
+
+
 	saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA);
 	if (saveDefAntenna == 0)
 		saveDefAntenna = 1;
@@ -1619,6 +1684,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (r)
 		return r;
 
+	if (mci)
+		ar9003_mci_reset(ah, false, IS_CHAN_2GHZ(chan), save_fullsleep);
+
 	/*
 	 * Some AR91xx SoC devices frequently fail to accept TSF writes
 	 * right after the chip reset. When that happens, write a new
@@ -1736,6 +1804,55 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_loadnf(ah, chan);
 	ath9k_hw_start_nfcal(ah, true);
 
+	if (mci && mci_hw->ready) {
+
+		if (IS_CHAN_2GHZ(chan) &&
+		    (mci_hw->bt_state == MCI_BT_SLEEP)) {
+
+			if (ar9003_mci_check_int(ah,
+			    AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) ||
+			    ar9003_mci_check_int(ah,
+			    AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) {
+
+				/*
+				 * BT is sleeping. Check if BT wakes up during
+				 * WLAN calibration. If BT wakes up during
+				 * WLAN calibration, need to go through all
+				 * message exchanges again and recal.
+				 */
+
+				ath_dbg(common, ATH_DBG_MCI, "MCI BT wakes up"
+					"during WLAN calibration\n");
+
+				REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+					  AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
+					  AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE);
+				ath_dbg(common, ATH_DBG_MCI, "MCI send"
+					"REMOTE_RESET\n");
+				ar9003_mci_remote_reset(ah, true);
+				ar9003_mci_send_sys_waking(ah, true);
+				udelay(1);
+				if (IS_CHAN_2GHZ(chan))
+					ar9003_mci_send_lna_transfer(ah, true);
+
+				mci_hw->bt_state = MCI_BT_AWAKE;
+
+				ath_dbg(common, ATH_DBG_MCI, "MCI re-cal\n");
+
+				if (caldata) {
+					caldata->done_txiqcal_once = false;
+					caldata->done_txclcal_once = false;
+					caldata->rtt_hist.num_readings = 0;
+				}
+
+				if (!ath9k_hw_init_cal(ah, chan))
+					return -EIO;
+
+			}
+		}
+		ar9003_mci_enable_interrupt(ah);
+	}
+
 	ENABLE_REGWRITE_BUFFER(ah);
 
 	ath9k_hw_restore_chainmask(ah);
@@ -1778,6 +1895,21 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (ah->btcoex_hw.enabled)
 		ath9k_hw_btcoex_enable(ah);
 
+	if (mci && mci_hw->ready) {
+		/*
+		 * check BT state again to make
+		 * sure it's not changed.
+		 */
+
+		ar9003_mci_sync_bt_state(ah);
+		ar9003_mci_2g5g_switch(ah, true);
+
+		if ((mci_hw->bt_state == MCI_BT_AWAKE) &&
+				(mci_hw->query_bt == true)) {
+			mci_hw->need_flush_btinfo = true;
+		}
+	}
+
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		ar9003_hw_bb_watchdog_config(ah);