diff options
| author | Rakesh Pillai <pillair@codeaurora.org> | 2019-02-19 11:39:36 +0530 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2019-09-23 10:27:56 +0300 |
| commit | c0e33fe6fb0fe392ebfab14127d210679c413192 (patch) | |
| tree | f9cbd9644a8ef9bfb0a087d4e4f2199c0bf7ae1a /drivers/net/wireless/ath/ath10k/wmi-tlv.h | |
| parent | 3f14b73c38431a6a1ed24de568e18ed89b7082e2 (diff) | |
ath10k: Add peer param map for tlv and non-tlv
The peer param id for PEER_PARAM_USE_FIXED_PWR
is different for tlv and non-tlv firmware. This
causes incorrect peer param to be set by the driver
to the firmware(tlv/non-tlv).
Create seperate peer param map for tlv and non-tlv
firmware and attach the peer param id based on the
firmware type during the init.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi-tlv.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi-tlv.h | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index 649b229a41e9..0b7cb011cb19 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -528,6 +528,24 @@ enum wmi_tlv_vdev_param { WMI_TLV_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE, }; +enum wmi_tlv_peer_param { + WMI_TLV_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ + WMI_TLV_PEER_AMPDU = 0x2, + WMI_TLV_PEER_AUTHORIZE = 0x3, + WMI_TLV_PEER_CHAN_WIDTH = 0x4, + WMI_TLV_PEER_NSS = 0x5, + WMI_TLV_PEER_USE_4ADDR = 0x6, + WMI_TLV_PEER_MEMBERSHIP = 0x7, + WMI_TLV_PEER_USERPOS = 0x8, + WMI_TLV_PEER_CRIT_PROTO_HINT_ENABLED = 0x9, + WMI_TLV_PEER_TX_FAIL_CNT_THR = 0xa, + WMI_TLV_PEER_SET_HW_RETRY_CTS2S = 0xb, + WMI_TLV_PEER_IBSS_ATIM_WINDOW_LENGTH = 0xc, + WMI_TLV_PEER_PHYMODE = 0xd, + WMI_TLV_PEER_USE_FIXED_PWR = 0xe, + WMI_TLV_PEER_DUMMY_VAR = 0xff, +}; + enum wmi_tlv_peer_flags { WMI_TLV_PEER_AUTH = 0x00000001, WMI_TLV_PEER_QOS = 0x00000002, |