net: usb: asix: ax88772: move embedded PHY detection as early as possible

Some HW revisions need additional MAC configuration before the embedded PHY
can be enabled. If this is not done, we won't be able to get response
from the internal PHY.

This issue was detected on chipcode == AX_AX88772_CHIPCODE variant,
where ax88772_hw_reset() was executed with missing embd_phy flag.

Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 20 insertions, 21 deletions

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 2c115216420a..15460d419e3f 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -354,24 +354,23 @@ out:
 static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
-	int ret, embd_phy;
+	struct asix_common_private *priv = dev->driver_priv;
 	u16 rx_ctl;
+	int ret;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
 			      AX_GPIO_GPO2EN, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
-
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy,
 			     0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 		goto out;
 	}
 
-	if (embd_phy) {
+	if (priv->embd_phy) {
 		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
 		if (ret < 0)
 			goto out;
@@ -449,17 +448,16 @@ out:
 static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 {
 	struct asix_data *data = (struct asix_data *)&dev->data;
-	int ret, embd_phy;
+	struct asix_common_private *priv = dev->driver_priv;
 	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
+	int ret;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 	if (ret < 0)
 		goto out;
 
-	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
-
-	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy |
 			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
 	if (ret < 0) {
 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
@@ -683,12 +681,6 @@ static int ax88772_init_phy(struct usbnet *dev)
 	struct asix_common_private *priv = dev->driver_priv;
 	int ret;
 
-	ret = asix_read_phy_addr(dev, true);
-	if (ret < 0)
-		return ret;
-
-	priv->phy_addr = ret;
-
 	snprintf(priv->phy_name, sizeof(priv->phy_name), PHY_ID_FMT,
 		 priv->mdio->id, priv->phy_addr);
 
@@ -716,6 +708,12 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	int ret, i;
 	u32 phyid;
 
+	priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev->driver_priv = priv;
+
 	usbnet_get_endpoints(dev, intf);
 
 	/* Maybe the boot loader passed the MAC address via device tree */
@@ -751,6 +749,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 
+	ret = asix_read_phy_addr(dev, true);
+	if (ret < 0)
+		return ret;
+
+	priv->phy_addr = ret;
+	priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10 ? true : false);
+
 	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
 	chipcode &= AX_CHIPCODE_MASK;
 
@@ -773,12 +778,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 		dev->rx_urb_size = 2048;
 	}
 
-	priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	dev->driver_priv = priv;
-
 	priv->presvd_phy_bmcr = 0;
 	priv->presvd_phy_advertise = 0;
 	if (chipcode == AX_AX88772_CHIPCODE) {