diff options
| author | Russell King <rmk+kernel@armlinux.org.uk> | 2020-12-09 11:22:54 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2020-12-09 19:38:10 -0800 |
| commit | 7a77233ec6d114322e2c4f71b4e26dbecd9ea8a7 (patch) | |
| tree | eae267a9d4b2e668468b83b07a67dc30b10755ba /drivers/net/phy | |
| parent | 0d035bed2a4a6c4878518749348be61bf082d12a (diff) | |
net: sfp: relax bitrate-derived mode check
Do not check the encoding when deriving 1000BASE-X from the bitrate
when no other modes are discovered. Some GPON modules (VSOL V2801F
and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a
1200Mbaud bitrate, but should be driven with 1000BASE-X on the host
side.
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/sfp-bus.c | 11 |
1 files changed, 5 insertions, 6 deletions
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 58014feedf6c..20b91f5dfc6e 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -334,14 +334,13 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, } /* If we haven't discovered any modes that this module supports, try - * the encoding and bitrate to determine supported modes. Some BiDi - * modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to - * the differing wavelengths, so do not set any transceiver bits. + * the bitrate to determine supported modes. Some BiDi modules (eg, + * 1310nm/1550nm) are not 1000BASE-BX compliant due to the differing + * wavelengths, so do not set any transceiver bits. */ if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) { - /* If the encoding and bit rate allows 1000baseX */ - if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom && - br_min <= 1300 && br_max >= 1200) + /* If the bit rate allows 1000baseX */ + if (br_nom && br_min <= 1300 && br_max >= 1200) phylink_set(modes, 1000baseX_Full); } |