diff options
author | Sasha Neftin <sasha.neftin@intel.com> | 2018-10-11 10:17:28 +0300 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2018-10-17 13:52:00 -0700 |
commit | ab4056126813c889ee6c8fb24ca8f75b84c981ab (patch) | |
tree | 66acd757449a65ac904b8471051f90f61c865d1e /drivers/net/ethernet | |
parent | c0071c7aa5fe0a6aa4cfc8426af893307ccd276d (diff) |
igc: Add NVM support
Add code for NVM support and get MAC address, complete probe
method.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r-- | drivers/net/ethernet/intel/igc/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc.h | 6 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_base.c | 109 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_defines.h | 52 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_hw.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_i225.c | 349 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_i225.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_mac.c | 170 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_mac.h | 6 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_main.c | 20 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_nvm.c | 215 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_nvm.h | 14 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_regs.h | 3 |
13 files changed, 949 insertions, 3 deletions
diff --git a/drivers/net/ethernet/intel/igc/Makefile b/drivers/net/ethernet/intel/igc/Makefile index 8b8022ea590a..2b5378d96c7b 100644 --- a/drivers/net/ethernet/intel/igc/Makefile +++ b/drivers/net/ethernet/intel/igc/Makefile @@ -7,4 +7,4 @@ obj-$(CONFIG_IGC) += igc.o -igc-objs := igc_main.o igc_mac.o igc_i225.o igc_base.o +igc-objs := igc_main.o igc_mac.o igc_i225.o igc_base.o igc_nvm.o diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 88ee451e36fd..6dcf51c112f4 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -131,6 +131,10 @@ enum igc_tx_flags { IGC_TX_FLAGS_CSUM = 0x20, }; +enum igc_boards { + board_base, +}; + /* The largest size we can write to the descriptor is 65535. In order to * maintain a power of two alignment we have to limit ourselves to 32K. */ @@ -342,6 +346,8 @@ struct igc_adapter { spinlock_t nfc_lock; struct igc_mac_addr *mac_table; + + struct igc_info ei; }; /* igc_desc_unused - calculate if we have unused descriptors */ diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c index 4efb47497e6b..2d49814966d3 100644 --- a/drivers/net/ethernet/intel/igc/igc_base.c +++ b/drivers/net/ethernet/intel/igc/igc_base.c @@ -54,6 +54,22 @@ out: } /** + * igc_check_for_link_base - Check for link + * @hw: pointer to the HW structure + * + * If sgmii is enabled, then use the pcs register to determine link, otherwise + * use the generic interface for determining link. + */ +static s32 igc_check_for_link_base(struct igc_hw *hw) +{ + s32 ret_val = 0; + + ret_val = igc_check_for_copper_link(hw); + + return ret_val; +} + +/** * igc_reset_hw_base - Reset hardware * @hw: pointer to the HW structure * @@ -108,11 +124,50 @@ static s32 igc_reset_hw_base(struct igc_hw *hw) } /** + * igc_init_nvm_params_base - Init NVM func ptrs. + * @hw: pointer to the HW structure + */ +static s32 igc_init_nvm_params_base(struct igc_hw *hw) +{ + struct igc_nvm_info *nvm = &hw->nvm; + u32 eecd = rd32(IGC_EECD); + u16 size; + + size = (u16)((eecd & IGC_EECD_SIZE_EX_MASK) >> + IGC_EECD_SIZE_EX_SHIFT); + + /* Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported + */ + if (size > 15) + size = 15; + + nvm->word_size = BIT(size); + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + + nvm->page_size = eecd & IGC_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & IGC_EECD_ADDR_BITS ? + 16 : 8; + + if (nvm->word_size == BIT(15)) + nvm->page_size = 128; + + return 0; +} + +/** * igc_init_mac_params_base - Init MAC func ptrs. * @hw: pointer to the HW structure */ static s32 igc_init_mac_params_base(struct igc_hw *hw) { + struct igc_dev_spec_base *dev_spec = &hw->dev_spec._base; struct igc_mac_info *mac = &hw->mac; /* Set mta register count */ @@ -125,6 +180,10 @@ static s32 igc_init_mac_params_base(struct igc_hw *hw) mac->ops.acquire_swfw_sync = igc_acquire_swfw_sync_i225; mac->ops.release_swfw_sync = igc_release_swfw_sync_i225; + /* Allow a single clear of the SW semaphore on I225 */ + if (mac->type == igc_i225) + dev_spec->clear_semaphore_once = true; + return 0; } @@ -142,11 +201,44 @@ static s32 igc_get_invariants_base(struct igc_hw *hw) if (ret_val) goto out; + /* NVM initialization */ + ret_val = igc_init_nvm_params_base(hw); + switch (hw->mac.type) { + case igc_i225: + ret_val = igc_init_nvm_params_i225(hw); + break; + default: + break; + } + + if (ret_val) + goto out; + out: return ret_val; } /** + * igc_get_link_up_info_base - Get link speed/duplex info + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * This is a wrapper function, if using the serial gigabit media independent + * interface, use PCS to retrieve the link speed and duplex information. + * Otherwise, use the generic function to get the link speed and duplex info. + */ +static s32 igc_get_link_up_info_base(struct igc_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 ret_val; + + ret_val = igc_get_speed_and_duplex_copper(hw, speed, duplex); + + return ret_val; +} + +/** * igc_init_hw_base - Initialize hardware * @hw: pointer to the HW structure * @@ -185,6 +277,19 @@ static s32 igc_init_hw_base(struct igc_hw *hw) } /** + * igc_read_mac_addr_base - Read device MAC address + * @hw: pointer to the HW structure + */ +static s32 igc_read_mac_addr_base(struct igc_hw *hw) +{ + s32 ret_val = 0; + + ret_val = igc_read_mac_addr(hw); + + return ret_val; +} + +/** * igc_rx_fifo_flush_base - Clean rx fifo after Rx enable * @hw: pointer to the HW structure * @@ -262,6 +367,10 @@ void igc_rx_fifo_flush_base(struct igc_hw *hw) static struct igc_mac_operations igc_mac_ops_base = { .init_hw = igc_init_hw_base, + .check_for_link = igc_check_for_link_base, + .rar_set = igc_rar_set, + .read_mac_addr = igc_read_mac_addr_base, + .get_speed_and_duplex = igc_get_link_up_info_base, }; const struct igc_info igc_base_info = { diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index 3d6c2cee0ad3..e5736577009a 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -35,6 +35,8 @@ */ #define IGC_RAH_AV 0x80000000 /* Receive descriptor valid */ #define IGC_RAH_POOL_1 0x00040000 +#define IGC_RAL_MAC_ADDR_LEN 4 +#define IGC_RAH_MAC_ADDR_LEN 2 /* Error Codes */ #define IGC_SUCCESS 0 @@ -57,9 +59,51 @@ #define IGC_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ #define IGC_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +/* SWFW_SYNC Definitions */ +#define IGC_SWFW_EEP_SM 0x1 +#define IGC_SWFW_PHY0_SM 0x2 + +/* NVM Control */ /* Number of milliseconds for NVM auto read done after MAC reset. */ #define AUTO_READ_DONE_TIMEOUT 10 #define IGC_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ +#define IGC_EECD_REQ 0x00000040 /* NVM Access Request */ +#define IGC_EECD_GNT 0x00000080 /* NVM Access Grant */ +/* NVM Addressing bits based on type 0=small, 1=large */ +#define IGC_EECD_ADDR_BITS 0x00000400 +#define IGC_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ +#define IGC_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ +#define IGC_EECD_SIZE_EX_SHIFT 11 +#define IGC_EECD_FLUPD_I225 0x00800000 /* Update FLASH */ +#define IGC_EECD_FLUDONE_I225 0x04000000 /* Update FLASH done*/ +#define IGC_EECD_FLASH_DETECTED_I225 0x00080000 /* FLASH detected */ +#define IGC_FLUDONE_ATTEMPTS 20000 +#define IGC_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ + +/* Offset to data in NVM read/write registers */ +#define IGC_NVM_RW_REG_DATA 16 +#define IGC_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define IGC_NVM_RW_REG_START 1 /* Start operation */ +#define IGC_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define IGC_NVM_POLL_READ 0 /* Flag for polling for read complete */ + +/* NVM Word Offsets */ +#define NVM_CHECKSUM_REG 0x003F + +/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ +#define NVM_SUM 0xBABA + +#define NVM_PBA_OFFSET_0 8 +#define NVM_PBA_OFFSET_1 9 +#define NVM_RESERVED_WORD 0xFFFF +#define NVM_PBA_PTR_GUARD 0xFAFA +#define NVM_WORD_SIZE_BASE_SHIFT 6 + +/* Collision related configuration parameters */ +#define IGC_COLLISION_THRESHOLD 15 +#define IGC_CT_SHIFT 4 +#define IGC_COLLISION_DISTANCE 63 +#define IGC_COLD_SHIFT 12 /* Device Status */ #define IGC_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ @@ -70,6 +114,14 @@ #define IGC_STATUS_TXOFF 0x00000010 /* transmission paused */ #define IGC_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define IGC_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define IGC_STATUS_SPEED_2500 0x00400000 /* Speed 2.5Gb/s */ + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_2500 2500 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 /* Interrupt Cause Read */ #define IGC_ICR_TXDW BIT(0) /* Transmit desc written back */ diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h index e31d85f1ee12..107d6461924b 100644 --- a/drivers/net/ethernet/intel/igc/igc_hw.h +++ b/drivers/net/ethernet/intel/igc/igc_hw.h @@ -11,6 +11,7 @@ #include "igc_regs.h" #include "igc_defines.h" #include "igc_mac.h" +#include "igc_nvm.h" #include "igc_i225.h" #include "igc_base.h" @@ -56,6 +57,8 @@ struct igc_info { struct igc_nvm_operations *nvm_ops; }; +extern const struct igc_info igc_base_info; + struct igc_mac_info { struct igc_mac_operations ops; diff --git a/drivers/net/ethernet/intel/igc/igc_i225.c b/drivers/net/ethernet/intel/igc/igc_i225.c index fb1487727d79..c25f555aaf82 100644 --- a/drivers/net/ethernet/intel/igc/igc_i225.c +++ b/drivers/net/ethernet/intel/igc/igc_i225.c @@ -9,6 +9,32 @@ * igc_get_hw_semaphore_i225 - Acquire hardware semaphore * @hw: pointer to the HW structure * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -IGC_ERR_NVM (-1). + */ +static s32 igc_acquire_nvm_i225(struct igc_hw *hw) +{ + return igc_acquire_swfw_sync_i225(hw, IGC_SWFW_EEP_SM); +} + +/** + * igc_release_nvm_i225 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + */ +static void igc_release_nvm_i225(struct igc_hw *hw) +{ + igc_release_swfw_sync_i225(hw, IGC_SWFW_EEP_SM); +} + +/** + * igc_get_hw_semaphore_i225 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * * Acquire the HW semaphore to access the PHY or NVM */ static s32 igc_get_hw_semaphore_i225(struct igc_hw *hw) @@ -139,3 +165,326 @@ void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask) igc_put_hw_semaphore(hw); } + +/** + * igc_read_nvm_srrd_i225 - Reads Shadow Ram using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the Shadow Ram to read + * @words: number of words to read + * @data: word read from the Shadow Ram + * + * Reads a 16 bit word from the Shadow Ram using the EERD register. + * Uses necessary synchronization semaphores. + */ +static s32 igc_read_nvm_srrd_i225(struct igc_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = 0; + u16 i, count; + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) { + count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ? + IGC_EERD_EEWR_MAX_COUNT : (words - i); + + status = hw->nvm.ops.acquire(hw); + if (status) + break; + + status = igc_read_nvm_eerd(hw, offset, count, data + i); + hw->nvm.ops.release(hw); + if (status) + break; + } + + return status; +} + +/** + * igc_write_nvm_srwr - Write to Shadow Ram using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow Ram to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow Ram + * + * Writes data to Shadow Ram at offset using EEWR register. + * + * If igc_update_nvm_checksum is not called after this function , the + * Shadow Ram will most likely contain an invalid checksum. + */ +static s32 igc_write_nvm_srwr(struct igc_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct igc_nvm_info *nvm = &hw->nvm; + u32 attempts = 100000; + u32 i, k, eewr = 0; + s32 ret_val = 0; + + /* A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if (offset >= nvm->word_size || (words > (nvm->word_size - offset)) || + words == 0) { + hw_dbg("nvm parameter(s) out of bounds\n"); + ret_val = -IGC_ERR_NVM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset + i) << IGC_NVM_RW_ADDR_SHIFT) | + (data[i] << IGC_NVM_RW_REG_DATA) | + IGC_NVM_RW_REG_START; + + wr32(IGC_SRWR, eewr); + + for (k = 0; k < attempts; k++) { + if (IGC_NVM_RW_REG_DONE & + rd32(IGC_SRWR)) { + ret_val = 0; + break; + } + udelay(5); + } + + if (ret_val) { + hw_dbg("Shadow RAM write EEWR timed out\n"); + break; + } + } + +out: + return ret_val; +} + +/** + * igc_write_nvm_srwr_i225 - Write to Shadow RAM using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow RAM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow RAM + * + * Writes data to Shadow RAM at offset using EEWR register. + * + * If igc_update_nvm_checksum is not called after this function , the + * data will not be committed to FLASH and also Shadow RAM will most likely + * contain an invalid checksum. + * + * If error code is returned, data and Shadow RAM may be inconsistent - buffer + * partially written. + */ +static s32 igc_write_nvm_srwr_i225(struct igc_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = 0; + u16 i, count; + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to write in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) { + count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ? + IGC_EERD_EEWR_MAX_COUNT : (words - i); + + status = hw->nvm.ops.acquire(hw); + if (status) + break; + + status = igc_write_nvm_srwr(hw, offset, count, data + i); + hw->nvm.ops.release(hw); + if (status) + break; + } + + return status; +} + +/** + * igc_validate_nvm_checksum_i225 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + */ +static s32 igc_validate_nvm_checksum_i225(struct igc_hw *hw) +{ + s32 (*read_op_ptr)(struct igc_hw *hw, u16 offset, u16 count, + u16 *data); + s32 status = 0; + + status = hw->nvm.ops.acquire(hw); + if (status) + goto out; + + /* Replace the read function with semaphore grabbing with + * the one that skips this for a while. + * We have semaphore taken already here. + */ + read_op_ptr = hw->nvm.ops.read; + hw->nvm.ops.read = igc_read_nvm_eerd; + + status = igc_validate_nvm_checksum(hw); + + /* Revert original read operation. */ + hw->nvm.ops.read = read_op_ptr; + + hw->nvm.ops.release(hw); + +out: + return status; +} + +/** + * igc_pool_flash_update_done_i225 - Pool FLUDONE status + * @hw: pointer to the HW structure + */ +static s32 igc_pool_flash_update_done_i225(struct igc_hw *hw) +{ + s32 ret_val = -IGC_ERR_NVM; + u32 i, reg; + + for (i = 0; i < IGC_FLUDONE_ATTEMPTS; i++) { + reg = rd32(IGC_EECD); + if (reg & IGC_EECD_FLUDONE_I225) { + ret_val = 0; + break; + } + udelay(5); + } + + return ret_val; +} + +/** + * igc_update_flash_i225 - Commit EEPROM to the flash + * @hw: pointer to the HW structure + */ +static s32 igc_update_flash_i225(struct igc_hw *hw) +{ + s32 ret_val = 0; + u32 flup; + + ret_val = igc_pool_flash_update_done_i225(hw); + if (ret_val == -IGC_ERR_NVM) { + hw_dbg("Flash update time out\n"); + goto out; + } + + flup = rd32(IGC_EECD) | IGC_EECD_FLUPD_I225; + wr32(IGC_EECD, flup); + + ret_val = igc_pool_flash_update_done_i225(hw); + if (ret_val) + hw_dbg("Flash update time out\n"); + else + hw_dbg("Flash update complete\n"); + +out: + return ret_val; +} + +/** + * igc_update_nvm_checksum_i225 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. Next commit EEPROM data onto the Flash. + */ +static s32 igc_update_nvm_checksum_i225(struct igc_hw *hw) +{ + u16 checksum = 0; + s32 ret_val = 0; + u16 i, nvm_data; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + ret_val = igc_read_nvm_eerd(hw, 0, 1, &nvm_data); + if (ret_val) { + hw_dbg("EEPROM read failed\n"); + goto out; + } + + ret_val = hw->nvm.ops.acquire(hw); + if (ret_val) + goto out; + + /* Do not use hw->nvm.ops.write, hw->nvm.ops.read + * because we do not want to take the synchronization + * semaphores twice here. + */ + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = igc_read_nvm_eerd(hw, i, 1, &nvm_data); + if (ret_val) { + hw->nvm.ops.release(hw); + hw_dbg("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16)NVM_SUM - checksum; + ret_val = igc_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1, + &checksum); + if (ret_val) { + hw->nvm.ops.release(hw); + hw_dbg("NVM Write Error while updating checksum.\n"); + goto out; + } + + hw->nvm.ops.release(hw); + + ret_val = igc_update_flash_i225(hw); + +out: + return ret_val; +} + +/** + * igc_get_flash_presence_i225 - Check if flash device is detected + * @hw: pointer to the HW structure + */ +bool igc_get_flash_presence_i225(struct igc_hw *hw) +{ + bool ret_val = false; + u32 eec = 0; + + eec = rd32(IGC_EECD); + if (eec & IGC_EECD_FLASH_DETECTED_I225) + ret_val = true; + + return ret_val; +} + +/** + * igc_init_nvm_params_i225 - Init NVM func ptrs. + * @hw: pointer to the HW structure + */ +s32 igc_init_nvm_params_i225(struct igc_hw *hw) +{ + struct igc_nvm_info *nvm = &hw->nvm; + + nvm->ops.acquire = igc_acquire_nvm_i225; + nvm->ops.release = igc_release_nvm_i225; + + /* NVM Function Pointers */ + if (igc_get_flash_presence_i225(hw)) { + hw->nvm.type = igc_nvm_flash_hw; + nvm->ops.read = igc_read_nvm_srrd_i225; + nvm->ops.write = igc_write_nvm_srwr_i225; + nvm->ops.validate = igc_validate_nvm_checksum_i225; + nvm->ops.update = igc_update_nvm_checksum_i225; + } else { + hw->nvm.type = igc_nvm_invm; + nvm->ops.read = igc_read_nvm_eerd; + nvm->ops.write = NULL; + nvm->ops.validate = NULL; + nvm->ops.update = NULL; + } + return 0; +} diff --git a/drivers/net/ethernet/intel/igc/igc_i225.h b/drivers/net/ethernet/intel/igc/igc_i225.h index 461cd8c7e352..7b66e1f9c0e6 100644 --- a/drivers/net/ethernet/intel/igc/igc_i225.h +++ b/drivers/net/ethernet/intel/igc/igc_i225.h @@ -7,4 +7,7 @@ s32 igc_acquire_swfw_sync_i225(struct igc_hw *hw, u16 mask); void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask); +s32 igc_init_nvm_params_i225(struct igc_hw *hw); +bool igc_get_flash_presence_i225(struct igc_hw *hw); + #endif diff --git a/drivers/net/ethernet/intel/igc/igc_mac.c b/drivers/net/ethernet/intel/igc/igc_mac.c index 90a98ee14550..249ac03b05d8 100644 --- a/drivers/net/ethernet/intel/igc/igc_mac.c +++ b/drivers/net/ethernet/intel/igc/igc_mac.c @@ -275,6 +275,129 @@ void igc_clear_hw_cntrs_base(struct igc_hw *hw) } /** + * igc_rar_set - Set receive address register + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + * + * Sets the receive address array register at index to the address passed + * in by addr. + */ +void igc_rar_set(struct igc_hw *hw, u8 *addr, u32 index) +{ + u32 rar_low, rar_high; + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32)addr[0] | + ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | ((u32)addr[3] << 24)); + + rar_high = ((u32)addr[4] | ((u32)addr[5] << 8)); + + /* If MAC address zero, no need to set the AV bit */ + if (rar_low || rar_high) + rar_high |= IGC_RAH_AV; + + /* Some bridges will combine consecutive 32-bit writes into + * a single burst write, which will malfunction on some parts. + * The flushes avoid this. + */ + wr32(IGC_RAL(index), rar_low); + wrfl(); + wr32(IGC_RAH(index), rar_high); + wrfl(); +} + +/** + * igc_check_for_copper_link - Check for link (Copper) + * @hw: pointer to the HW structure + * + * Checks to see of the link status of the hardware has changed. If a + * change in link status has been detected, then we read the PHY registers + * to get the current speed/duplex if link exists. + */ +s32 igc_check_for_copper_link(struct igc_hw *hw) +{ + struct igc_mac_info *mac = &hw->mac; + s32 ret_val; + bool link; + + /* We only want to go out to the PHY registers to see if Auto-Neg + * has completed and/or if our link status has changed. The + * get_link_status flag is set upon receiving a Link Status + * Change or Rx Sequence Error interrupt. + */ + if (!mac->get_link_status) { + ret_val = 0; + goto out; + } + + /* First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + */ + if (ret_val) + goto out; + + if (!link) + goto out; /* No link detected */ + + mac->get_link_status = false; + + /* Check if there was DownShift, must be checked + * immediately after link-up + */ + + /* If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!mac->autoneg) { + ret_val = -IGC_ERR_CONFIG; + goto out; + } + + /* Auto-Neg is enabled. Auto Speed Detection takes care + * of MAC speed/duplex configuration. So we only need to + * configure Collision Distance in the MAC. + */ + igc_config_collision_dist(hw); + + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + if (ret_val) + hw_dbg("Error configuring flow control\n"); + +out: + return ret_val; +} + +/** + * igc_config_collision_dist - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + */ +void igc_config_collision_dist(struct igc_hw *hw) +{ + u32 tctl; + + tctl = rd32(IGC_TCTL); + + tctl &= ~IGC_TCTL_COLD; + tctl |= IGC_COLLISION_DISTANCE << IGC_COLD_SHIFT; + + wr32(IGC_TCTL, tctl); + wrfl(); +} + +/** * igc_get_auto_rd_done - Check for auto read completion * @hw: pointer to the HW structure * @@ -303,6 +426,53 @@ out: } /** + * igc_get_speed_and_duplex_copper - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Read the status register for the current speed/duplex and store the current + * speed and duplex for copper connections. + */ +s32 igc_get_speed_and_duplex_copper(struct igc_hw *hw, u16 *speed, + u16 *duplex) +{ + u32 status; + + status = rd32(IGC_STATUS); + if (status & IGC_STATUS_SPEED_1000) { + /* For I225, STATUS will indicate 1G speed in both 1 Gbps + * and 2.5 Gbps link modes. An additional bit is used + * to differentiate between 1 Gbps and 2.5 Gbps. + */ + if (hw->mac.type == igc_i225 && + (status & IGC_STATUS_SPEED_2500)) { + *speed = SPEED_2500; + hw_dbg("2500 Mbs, "); + } else { + *speed = SPEED_1000; + hw_dbg("1000 Mbs, "); + } + } else if (status & IGC_STATUS_SPEED_100) { + *speed = SPEED_100; + hw_dbg("100 Mbs, "); + } else { + *speed = SPEED_10; + hw_dbg("10 Mbs, "); + } + + if (status & IGC_STATUS_FD) { + *duplex = FULL_DUPLEX; + hw_dbg("Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + hw_dbg("Half Duplex\n"); + } + + return 0; +} + +/** * igc_put_hw_semaphore - Release hardware semaphore * @hw: pointer to the HW structure * diff --git a/drivers/net/ethernet/intel/igc/igc_mac.h b/drivers/net/ethernet/intel/igc/igc_mac.h index 88bdb8dd6f3f..88599661d017 100644 --- a/drivers/net/ethernet/intel/igc/igc_mac.h +++ b/drivers/net/ethernet/intel/igc/igc_mac.h @@ -13,10 +13,16 @@ /* forward declaration */ s32 igc_disable_pcie_master(struct igc_hw *hw); +s32 igc_check_for_copper_link(struct igc_hw *hw); void igc_init_rx_addrs(struct igc_hw *hw, u16 rar_count); s32 igc_setup_link(struct igc_hw *hw); void igc_clear_hw_cntrs_base(struct igc_hw *hw); s32 igc_get_auto_rd_done(struct igc_hw *hw); void igc_put_hw_semaphore(struct igc_hw *hw); +void igc_rar_set(struct igc_hw *hw, u8 *addr, u32 index); +void igc_config_collision_dist(struct igc_hw *hw); + +s32 igc_get_speed_and_duplex_copper(struct igc_hw *hw, u16 *speed, + u16 *duplex); #endif diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index f2ad49fcd39b..115fc2a544d7 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -27,9 +27,13 @@ static const char igc_driver_string[] = DRV_SUMMARY; static const char igc_copyright[] = "Copyright(c) 2018 Intel Corporation."; +static const struct igc_info *igc_info_tbl[] = { + [board_base] = &igc_base_info, +}; + static const struct pci_device_id igc_pci_tbl[] = { - { PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_LM) }, - { PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_V) }, + { PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_LM), board_base }, + { PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_V), board_base }, /* required last entry */ {0, } }; @@ -3289,6 +3293,7 @@ static int igc_probe(struct pci_dev *pdev, struct igc_adapter *adapter; struct net_device *netdev; struct igc_hw *hw; + const struct igc_info *ei = igc_info_tbl[ent->driver_data]; int err, pci_using_dac; err = pci_enable_device_mem(pdev); @@ -3370,6 +3375,14 @@ static int igc_probe(struct pci_dev *pdev, hw->subsystem_vendor_id = pdev->subsystem_vendor; hw->subsystem_device_id = pdev->subsystem_device; + /* Copy the default MAC and PHY function pointers */ + memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); + + /* Initialize skew-specific constants */ + err = ei->get_invariants(hw); + if (err) + goto err_sw_init; + /* setup the private structure */ err = igc_sw_init(adapter); if (err) @@ -3403,6 +3416,9 @@ static int igc_probe(struct pci_dev *pdev, /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); + /* Check if Media Autosense is enabled */ + adapter->ei = *ei; + /* print pcie link status and MAC address */ pcie_print_link_status(pdev); netdev_info(netdev, "MAC: %pM\n", netdev->dev_addr); diff --git a/drivers/net/ethernet/intel/igc/igc_nvm.c b/drivers/net/ethernet/intel/igc/igc_nvm.c new file mode 100644 index 000000000000..58f81aba0144 --- /dev/null +++ b/drivers/net/ethernet/intel/igc/igc_nvm.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018 Intel Corporation */ + +#include "igc_mac.h" +#include "igc_nvm.h" + +/** + * igc_poll_eerd_eewr_done - Poll for EEPROM read/write completion + * @hw: pointer to the HW structure + * @ee_reg: EEPROM flag for polling + * + * Polls the EEPROM status bit for either read or write completion based + * upon the value of 'ee_reg'. + */ +static s32 igc_poll_eerd_eewr_done(struct igc_hw *hw, int ee_reg) +{ + s32 ret_val = -IGC_ERR_NVM; + u32 attempts = 100000; + u32 i, reg = 0; + + for (i = 0; i < attempts; i++) { + if (ee_reg == IGC_NVM_POLL_READ) + reg = rd32(IGC_EERD); + else + reg = rd32(IGC_EEWR); + + if (reg & IGC_NVM_RW_REG_DONE) { + ret_val = 0; + break; + } + + udelay(5); + } + + return ret_val; +} + +/** + * igc_acquire_nvm - Generic request for access to EEPROM + * @hw: pointer to the HW structure + * + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -IGC_ERR_NVM (-1). + */ +s32 igc_acquire_nvm(struct igc_hw *hw) +{ + s32 timeout = IGC_NVM_GRANT_ATTEMPTS; + u32 eecd = rd32(IGC_EECD); + s32 ret_val = 0; + + wr32(IGC_EECD, eecd | IGC_EECD_REQ); + eecd = rd32(IGC_EECD); + + while (timeout) { + if (eecd & IGC_EECD_GNT) + break; + udelay(5); + eecd = rd32(IGC_EECD); + timeout--; + } + + if (!timeout) { + eecd &= ~IGC_EECD_REQ; + wr32(IGC_EECD, eecd); + hw_dbg("Could not acquire NVM grant\n"); + ret_val = -IGC_ERR_NVM; + } + + return ret_val; +} + +/** + * igc_release_nvm - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit. + */ +void igc_release_nvm(struct igc_hw *hw) +{ + u32 eecd; + + eecd = rd32(IGC_EECD); + eecd &= ~IGC_EECD_REQ; + wr32(IGC_EECD, eecd); +} + +/** + * igc_read_nvm_eerd - Reads EEPROM using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + */ +s32 igc_read_nvm_eerd(struct igc_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct igc_nvm_info *nvm = &hw->nvm; + u32 i, eerd = 0; + s32 ret_val = 0; + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if (offset >= nvm->word_size || (words > (nvm->word_size - offset)) || + words == 0) { + hw_dbg("nvm parameter(s) out of bounds\n"); + ret_val = -IGC_ERR_NVM; + goto out; + } + + for (i = 0; i < words; i++) { + eerd = ((offset + i) << IGC_NVM_RW_ADDR_SHIFT) + + IGC_NVM_RW_REG_START; + + wr32(IGC_EERD, eerd); + ret_val = igc_poll_eerd_eewr_done(hw, IGC_NVM_POLL_READ); + if (ret_val) + break; + + data[i] = (rd32(IGC_EERD) >> IGC_NVM_RW_REG_DATA); + } + +out: + return ret_val; +} + +/** + * igc_read_mac_addr - Read device MAC address + * @hw: pointer to the HW structure + */ +s32 igc_read_mac_addr(struct igc_hw *hw) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = rd32(IGC_RAH(0)); + rar_low = rd32(IGC_RAL(0)); + + for (i = 0; i < IGC_RAL_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i] = (u8)(rar_low >> (i * 8)); + + for (i = 0; i < IGC_RAH_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i + 4] = (u8)(rar_high >> (i * 8)); + + for (i = 0; i < ETH_ALEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + + return 0; +} + +/** + * igc_validate_nvm_checksum - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + */ +s32 igc_validate_nvm_checksum(struct igc_hw *hw) +{ + u16 checksum = 0; + u16 i, nvm_data; + s32 ret_val = 0; + + for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + hw_dbg("NVM Read Error\n"); + goto out; + } + checksum += nvm_data; + } + + if (checksum != (u16)NVM_SUM) { + hw_dbg("NVM Checksum Invalid\n"); + ret_val = -IGC_ERR_NVM; + goto out; + } + +out: + return ret_val; +} + +/** + * igc_update_nvm_checksum - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + */ +s32 igc_update_nvm_checksum(struct igc_hw *hw) +{ + u16 checksum = 0; + u16 i, nvm_data; + s32 ret_val; + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + hw_dbg("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16)NVM_SUM - checksum; + ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); + if (ret_val) + hw_dbg("NVM Write Error while updating checksum.\n"); + +out: + return ret_val; +} diff --git a/drivers/net/ethernet/intel/igc/igc_nvm.h b/drivers/net/ethernet/intel/igc/igc_nvm.h new file mode 100644 index 000000000000..f9fc2e9cfb03 --- /dev/null +++ b/drivers/net/ethernet/intel/igc/igc_nvm.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018 Intel Corporation */ + +#ifndef _IGC_NVM_H_ +#define _IGC_NVM_H_ + +s32 igc_acquire_nvm(struct igc_hw *hw); +void igc_release_nvm(struct igc_hw *hw); +s32 igc_read_mac_addr(struct igc_hw *hw); +s32 igc_read_nvm_eerd(struct igc_hw *hw, u16 offset, u16 words, u16 *data); +s32 igc_validate_nvm_checksum(struct igc_hw *hw); +s32 igc_update_nvm_checksum(struct igc_hw *hw); + +#endif diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h index c57f573fb864..b5996e474c3c 100644 --- a/drivers/net/ethernet/intel/igc/igc_regs.h +++ b/drivers/net/ethernet/intel/igc/igc_regs.h @@ -191,6 +191,9 @@ /* Management registers */ #define IGC_MANC 0x05820 /* Management Control - RW */ +/* Shadow Ram Write Register - RW */ +#define IGC_SRWR 0x12018 + /* forward declaration */ struct igc_hw; u32 igc_rd32(struct igc_hw *hw, u32 reg); |