diff options
author | Ben Hutchings <bhutchings@solarflare.com> | 2012-07-10 10:56:00 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2012-07-10 23:13:46 -0700 |
commit | 49ce9c2cda18f62b13055dc715e7b514157c2da8 (patch) | |
tree | 432dea5cfd5c5f4b95a71a1e958e13b5cc538a1f /drivers/net/ethernet/tehuti | |
parent | ae86b9e3846f6fc5509dee721f2bdba1db8ab96a (diff) |
drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions
Fix incorrect start markers, wrapped summary lines, missing section
breaks, incorrect separators, and some name mismatches. Delete
a few that are content-free.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/tehuti')
-rw-r--r-- | drivers/net/ethernet/tehuti/tehuti.c | 177 |
1 files changed, 103 insertions, 74 deletions
diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 447a6932cab3..6ce9edd95c04 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -137,14 +137,15 @@ static void print_eth_id(struct net_device *ndev) #define bdx_disable_interrupts(priv) \ do { WRITE_REG(priv, regIMR, 0); } while (0) -/* bdx_fifo_init - * create TX/RX descriptor fifo for host-NIC communication. +/** + * bdx_fifo_init - create TX/RX descriptor fifo for host-NIC communication. + * @priv: NIC private structure + * @f: fifo to initialize + * @fsz_type: fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB + * @reg_XXX: offsets of registers relative to base address + * * 1K extra space is allocated at the end of the fifo to simplify * processing of descriptors that wraps around fifo's end - * @priv - NIC private structure - * @f - fifo to initialize - * @fsz_type - fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB - * @reg_XXX - offsets of registers relative to base address * * Returns 0 on success, negative value on failure * @@ -177,9 +178,10 @@ bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type, RET(0); } -/* bdx_fifo_free - free all resources used by fifo - * @priv - NIC private structure - * @f - fifo to release +/** + * bdx_fifo_free - free all resources used by fifo + * @priv: NIC private structure + * @f: fifo to release */ static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f) { @@ -192,9 +194,9 @@ static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f) RET(); } -/* +/** * bdx_link_changed - notifies OS about hw link state. - * @bdx_priv - hw adapter structure + * @priv: hw adapter structure */ static void bdx_link_changed(struct bdx_priv *priv) { @@ -233,10 +235,10 @@ static void bdx_isr_extra(struct bdx_priv *priv, u32 isr) } -/* bdx_isr - Interrupt Service Routine for Bordeaux NIC - * @irq - interrupt number - * @ndev - network device - * @regs - CPU registers +/** + * bdx_isr_napi - Interrupt Service Routine for Bordeaux NIC + * @irq: interrupt number + * @dev: network device * * Return IRQ_NONE if it was not our interrupt, IRQ_HANDLED - otherwise * @@ -307,8 +309,10 @@ static int bdx_poll(struct napi_struct *napi, int budget) return work_done; } -/* bdx_fw_load - loads firmware to NIC - * @priv - NIC private structure +/** + * bdx_fw_load - loads firmware to NIC + * @priv: NIC private structure + * * Firmware is loaded via TXD fifo, so it must be initialized first. * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC * can have few of them). So all drivers use semaphore register to choose one @@ -380,8 +384,9 @@ static void bdx_restore_mac(struct net_device *ndev, struct bdx_priv *priv) RET(); } -/* bdx_hw_start - inits registers and starts HW's Rx and Tx engines - * @priv - NIC private structure +/** + * bdx_hw_start - inits registers and starts HW's Rx and Tx engines + * @priv: NIC private structure */ static int bdx_hw_start(struct bdx_priv *priv) { @@ -691,12 +696,13 @@ static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) RET(-EOPNOTSUPP); } -/* +/** * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid - * by passing VLAN filter table to hardware - * @ndev network device - * @vid VLAN vid - * @op add or kill operation + * @ndev: network device + * @vid: VLAN vid + * @op: add or kill operation + * + * Passes VLAN filter table to hardware */ static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable) { @@ -722,10 +728,10 @@ static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable) RET(); } -/* +/** * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table - * @ndev network device - * @vid VLAN vid to add + * @ndev: network device + * @vid: VLAN vid to add */ static int bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid) { @@ -733,10 +739,10 @@ static int bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid) return 0; } -/* +/** * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table - * @ndev network device - * @vid VLAN vid to kill + * @ndev: network device + * @vid: VLAN vid to kill */ static int bdx_vlan_rx_kill_vid(struct net_device *ndev, unsigned short vid) { @@ -974,8 +980,9 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n) * Rx Init * *************************************************************************/ -/* bdx_rx_init - initialize RX all related HW and SW resources - * @priv - NIC private structure +/** + * bdx_rx_init - initialize RX all related HW and SW resources + * @priv: NIC private structure * * Returns 0 on success, negative value on failure * @@ -1016,9 +1023,10 @@ err_mem: return -ENOMEM; } -/* bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo - * @priv - NIC private structure - * @f - RXF fifo +/** + * bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo + * @priv: NIC private structure + * @f: RXF fifo */ static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f) { @@ -1045,8 +1053,10 @@ static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f) } } -/* bdx_rx_free - release all Rx resources - * @priv - NIC private structure +/** + * bdx_rx_free - release all Rx resources + * @priv: NIC private structure + * * It assumes that Rx is desabled in HW */ static void bdx_rx_free(struct bdx_priv *priv) @@ -1067,9 +1077,11 @@ static void bdx_rx_free(struct bdx_priv *priv) * Rx Engine * *************************************************************************/ -/* bdx_rx_alloc_skbs - fill rxf fifo with new skbs - * @priv - nic's private structure - * @f - RXF fifo that needs skbs +/** + * bdx_rx_alloc_skbs - fill rxf fifo with new skbs + * @priv: nic's private structure + * @f: RXF fifo that needs skbs + * * It allocates skbs, build rxf descs and push it (rxf descr) into rxf fifo. * skb's virtual and physical addresses are stored in skb db. * To calculate free space, func uses cached values of RPTR and WPTR @@ -1179,13 +1191,15 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd) RET(); } -/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS +/** + * bdx_rx_receive - receives full packets from RXD fifo and pass them to OS * NOTE: a special treatment is given to non-continuous descriptors * that start near the end, wraps around and continue at the beginning. a second * part is copied right after the first, and then descriptor is interpreted as * normal. fifo has an extra space to allow such operations - * @priv - nic's private structure - * @f - RXF fifo that needs skbs + * @priv: nic's private structure + * @f: RXF fifo that needs skbs + * @budget: maximum number of packets to receive */ /* TBD: replace memcpy func call by explicite inline asm */ @@ -1375,9 +1389,10 @@ static inline int bdx_tx_db_size(struct txdb *db) return db->size - taken; } -/* __bdx_tx_ptr_next - helper function, increment read/write pointer + wrap - * @d - tx data base - * @ptr - read or write pointer +/** + * __bdx_tx_db_ptr_next - helper function, increment read/write pointer + wrap + * @db: tx data base + * @pptr: read or write pointer */ static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr) { @@ -1394,8 +1409,9 @@ static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr) *pptr = db->start; } -/* bdx_tx_db_inc_rptr - increment read pointer - * @d - tx data base +/** + * bdx_tx_db_inc_rptr - increment read pointer + * @db: tx data base */ static inline void bdx_tx_db_inc_rptr(struct txdb *db) { @@ -1403,8 +1419,9 @@ static inline void bdx_tx_db_inc_rptr(struct txdb *db) __bdx_tx_db_ptr_next(db, &db->rptr); } -/* bdx_tx_db_inc_rptr - increment write pointer - * @d - tx data base +/** + * bdx_tx_db_inc_wptr - increment write pointer + * @db: tx data base */ static inline void bdx_tx_db_inc_wptr(struct txdb *db) { @@ -1413,9 +1430,11 @@ static inline void bdx_tx_db_inc_wptr(struct txdb *db) a result of write */ } -/* bdx_tx_db_init - creates and initializes tx db - * @d - tx data base - * @sz_type - size of tx fifo +/** + * bdx_tx_db_init - creates and initializes tx db + * @d: tx data base + * @sz_type: size of tx fifo + * * Returns 0 on success, error code otherwise */ static int bdx_tx_db_init(struct txdb *d, int sz_type) @@ -1441,8 +1460,9 @@ static int bdx_tx_db_init(struct txdb *d, int sz_type) return 0; } -/* bdx_tx_db_close - closes tx db and frees all memory - * @d - tx data base +/** + * bdx_tx_db_close - closes tx db and frees all memory + * @d: tx data base */ static void bdx_tx_db_close(struct txdb *d) { @@ -1463,9 +1483,11 @@ static struct { u16 qwords; /* qword = 64 bit */ } txd_sizes[MAX_SKB_FRAGS + 1]; -/* txdb_map_skb - creates and stores dma mappings for skb's data blocks - * @priv - NIC private structure - * @skb - socket buffer to map +/** + * bdx_tx_map_skb - creates and stores dma mappings for skb's data blocks + * @priv: NIC private structure + * @skb: socket buffer to map + * @txdd: TX descriptor to use * * It makes dma mappings for skb's data blocks and writes them to PBL of * new tx descriptor. It also stores them in the tx db, so they could be @@ -1562,9 +1584,10 @@ err_mem: return -ENOMEM; } -/* +/** * bdx_tx_space - calculates available space in TX fifo - * @priv - NIC private structure + * @priv: NIC private structure + * * Returns available space in TX fifo in bytes */ static inline int bdx_tx_space(struct bdx_priv *priv) @@ -1579,9 +1602,10 @@ static inline int bdx_tx_space(struct bdx_priv *priv) return fsize; } -/* bdx_tx_transmit - send packet to NIC - * @skb - packet to send - * ndev - network device assigned to NIC +/** + * bdx_tx_transmit - send packet to NIC + * @skb: packet to send + * @ndev: network device assigned to NIC * Return codes: * o NETDEV_TX_OK everything ok. * o NETDEV_TX_BUSY Cannot transmit packet, try later @@ -1699,8 +1723,10 @@ static netdev_tx_t bdx_tx_transmit(struct sk_buff *skb, return NETDEV_TX_OK; } -/* bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ. - * @priv - bdx adapter +/** + * bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ. + * @priv: bdx adapter + * * It scans TXF fifo for descriptors, frees DMA mappings and reports to OS * that those packets were sent */ @@ -1761,7 +1787,8 @@ static void bdx_tx_cleanup(struct bdx_priv *priv) spin_unlock(&priv->tx_lock); } -/* bdx_tx_free_skbs - frees all skbs from TXD fifo. +/** + * bdx_tx_free_skbs - frees all skbs from TXD fifo. * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod */ static void bdx_tx_free_skbs(struct bdx_priv *priv) @@ -1790,10 +1817,11 @@ static void bdx_tx_free(struct bdx_priv *priv) bdx_tx_db_close(&priv->txdb); } -/* bdx_tx_push_desc - push descriptor to TxD fifo - * @priv - NIC private structure - * @data - desc's data - * @size - desc's size +/** + * bdx_tx_push_desc - push descriptor to TxD fifo + * @priv: NIC private structure + * @data: desc's data + * @size: desc's size * * Pushes desc to TxD fifo and overlaps it if needed. * NOTE: this func does not check for available space. this is responsibility @@ -1819,10 +1847,11 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); } -/* bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way - * @priv - NIC private structure - * @data - desc's data - * @size - desc's size +/** + * bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way + * @priv: NIC private structure + * @data: desc's data + * @size: desc's size * * NOTE: this func does check for available space and, if necessary, waits for * NIC to read existing data before writing new one. |