be2net: Support for OS2BMC.

OS2BMC feature will allow the server to communicate with the on-board
BMC/idrac (Baseboard Management Controller) over the LOM via
standard Ethernet.

When OS2BMC feature is enabled, the LOM will filter traffic coming
from the host. If the destination MAC address matches the iDRAC MAC
address, it will forward the packet to the NC-SI side band interface
for iDRAC processing. Otherwise, it would send it out on the wire to
the external network. Broadcast and multicast packets are sent on the
side-band NC-SI channel and on the wire as well. Some of the packet
filters are not supported in the NIC and hence driver will identify
such packets and will hint the NIC to send those packets to the BMC.
This is done by duplicating packets on the management ring. Packets
are sent to the management ring, by setting mgmt bit in the wrb header.
The NIC will forward the packets on the management ring to the BMC
through the side-band NC-SI channel.

Please refer to this online document for more details,
http://www.dell.com/downloads/global/products/pedge/
os_to_bmc_passthrough_a_new_chapter_in_system_management.pdf

Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 138 insertions, 0 deletions

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 79fca825d439..dc7c0fd239f7 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -820,6 +820,8 @@ static void wrb_fill_hdr(struct be_adapter *adapter,
 
 	SET_TX_WRB_HDR_BITS(num_wrb, hdr, skb_wrb_cnt(skb));
 	SET_TX_WRB_HDR_BITS(len, hdr, skb->len);
+	SET_TX_WRB_HDR_BITS(mgmt, hdr,
+			    BE_WRB_F_GET(wrb_params->features, OS2BMC));
 }
 
 static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb,
@@ -1156,6 +1158,130 @@ static void be_xmit_flush(struct be_adapter *adapter, struct be_tx_obj *txo)
 	txo->pend_wrb_cnt = 0;
 }
 
+/* OS2BMC related */
+
+#define DHCP_CLIENT_PORT	68
+#define DHCP_SERVER_PORT	67
+#define NET_BIOS_PORT1		137
+#define NET_BIOS_PORT2		138
+#define DHCPV6_RAS_PORT		547
+
+#define is_mc_allowed_on_bmc(adapter, eh)	\
+	(!is_multicast_filt_enabled(adapter) &&	\
+	 is_multicast_ether_addr(eh->h_dest) &&	\
+	 !is_broadcast_ether_addr(eh->h_dest))
+
+#define is_bc_allowed_on_bmc(adapter, eh)	\
+	(!is_broadcast_filt_enabled(adapter) &&	\
+	 is_broadcast_ether_addr(eh->h_dest))
+
+#define is_arp_allowed_on_bmc(adapter, skb)	\
+	(is_arp(skb) && is_arp_filt_enabled(adapter))
+
+#define is_broadcast_packet(eh, adapter)	\
+		(is_multicast_ether_addr(eh->h_dest) && \
+		!compare_ether_addr(eh->h_dest, adapter->netdev->broadcast))
+
+#define is_arp(skb)	(skb->protocol == htons(ETH_P_ARP))
+
+#define is_arp_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & (BMC_FILT_BROADCAST_ARP))
+
+#define is_dhcp_client_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_CLIENT)
+
+#define is_dhcp_srvr_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_SERVER)
+
+#define is_nbios_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_NET_BIOS)
+
+#define is_ipv6_na_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask &	\
+			BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER)
+
+#define is_ipv6_ra_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RA)
+
+#define is_ipv6_ras_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RAS)
+
+#define is_broadcast_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST)
+
+#define is_multicast_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST)
+
+static bool be_send_pkt_to_bmc(struct be_adapter *adapter,
+			       struct sk_buff **skb)
+{
+	struct ethhdr *eh = (struct ethhdr *)(*skb)->data;
+	bool os2bmc = false;
+
+	if (!be_is_os2bmc_enabled(adapter))
+		goto done;
+
+	if (!is_multicast_ether_addr(eh->h_dest))
+		goto done;
+
+	if (is_mc_allowed_on_bmc(adapter, eh) ||
+	    is_bc_allowed_on_bmc(adapter, eh) ||
+	    is_arp_allowed_on_bmc(adapter, (*skb))) {
+		os2bmc = true;
+		goto done;
+	}
+
+	if ((*skb)->protocol == htons(ETH_P_IPV6)) {
+		struct ipv6hdr *hdr = ipv6_hdr((*skb));
+		u8 nexthdr = hdr->nexthdr;
+
+		if (nexthdr == IPPROTO_ICMPV6) {
+			struct icmp6hdr *icmp6 = icmp6_hdr((*skb));
+
+			switch (icmp6->icmp6_type) {
+			case NDISC_ROUTER_ADVERTISEMENT:
+				os2bmc = is_ipv6_ra_filt_enabled(adapter);
+				goto done;
+			case NDISC_NEIGHBOUR_ADVERTISEMENT:
+				os2bmc = is_ipv6_na_filt_enabled(adapter);
+				goto done;
+			default:
+				break;
+			}
+		}
+	}
+
+	if (is_udp_pkt((*skb))) {
+		struct udphdr *udp = udp_hdr((*skb));
+
+		switch (udp->dest) {
+		case DHCP_CLIENT_PORT:
+			os2bmc = is_dhcp_client_filt_enabled(adapter);
+			goto done;
+		case DHCP_SERVER_PORT:
+			os2bmc = is_dhcp_srvr_filt_enabled(adapter);
+			goto done;
+		case NET_BIOS_PORT1:
+		case NET_BIOS_PORT2:
+			os2bmc = is_nbios_filt_enabled(adapter);
+			goto done;
+		case DHCPV6_RAS_PORT:
+			os2bmc = is_ipv6_ras_filt_enabled(adapter);
+			goto done;
+		default:
+			break;
+		}
+	}
+done:
+	/* For packets over a vlan, which are destined
+	 * to BMC, asic expects the vlan to be inline in the packet.
+	 */
+	if (os2bmc)
+		*skb = be_insert_vlan_in_pkt(adapter, *skb, NULL);
+
+	return os2bmc;
+}
+
 static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
@@ -1177,6 +1303,18 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 		goto drop;
 	}
 
+	/* if os2bmc is enabled and if the pkt is destined to bmc,
+	 * enqueue the pkt a 2nd time with mgmt bit set.
+	 */
+	if (be_send_pkt_to_bmc(adapter, &skb)) {
+		BE_WRB_F_SET(wrb_params.features, OS2BMC, 1);
+		wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params);
+		if (unlikely(!wrb_cnt))
+			goto drop;
+		else
+			skb_get(skb);
+	}
+
 	if (be_is_txq_full(txo)) {
 		netif_stop_subqueue(netdev, q_idx);
 		tx_stats(txo)->tx_stops++;