diff options
| author | Heiner Kallweit <hkallweit1@gmail.com> | 2021-01-20 08:27:14 +0100 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2021-01-21 17:11:34 -0800 |
| commit | 05fcc25662a3bbfc5daa9247132b2d8535053883 (patch) | |
| tree | 89337cb6178970c73df9b7de00497d98b5a8d723 /drivers/net/ethernet/chelsio | |
| parent | fdb6b338d2e5f12dda2d80880ae4800547388bb4 (diff) | |
cxgb4: remove bogus CHELSIO_VPD_UNIQUE_ID constant
The comment is quite weird, there is no such thing as a vendor-specific
VPD id. 0x82 is the value of PCI_VPD_LRDT_ID_STRING. So what we are
doing here is simply checking whether the byte at VPD address VPD_BASE
is a valid string LRDT, same as what is done a few lines later in
the code.
LRDT = Large Resource Data Tag, see PCI 2.2 spec, VPD chapter
v2:
- don't set VPD_BASE / VPD_BASE_OLD separately
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/644ef22f-e86a-5cc1-0f27-f873ab165696@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/ethernet/chelsio')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 13 |
1 files changed, 3 insertions, 10 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 98d01a7497ec..98829e482bfa 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2689,7 +2689,6 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size) #define VPD_BASE 0x400 #define VPD_BASE_OLD 0 #define VPD_LEN 1024 -#define CHELSIO_VPD_UNIQUE_ID 0x82 /** * t4_eeprom_ptov - translate a physical EEPROM address to virtual @@ -2745,7 +2744,7 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p) { int i, ret = 0, addr; int ec, sn, pn, na; - u8 *vpd, csum; + u8 *vpd, csum, base_val = 0; unsigned int vpdr_len, kw_offset, id_len; vpd = vmalloc(VPD_LEN); @@ -2755,17 +2754,11 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p) /* Card information normally starts at VPD_BASE but early cards had * it at 0. */ - ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd); + ret = pci_read_vpd(adapter->pdev, VPD_BASE, 1, &base_val); if (ret < 0) goto out; - /* The VPD shall have a unique identifier specified by the PCI SIG. - * For chelsio adapters, the identifier is 0x82. The first byte of a VPD - * shall be CHELSIO_VPD_UNIQUE_ID (0x82). The VPD programming software - * is expected to automatically put this entry at the - * beginning of the VPD. - */ - addr = *vpd == CHELSIO_VPD_UNIQUE_ID ? VPD_BASE : VPD_BASE_OLD; + addr = base_val == PCI_VPD_LRDT_ID_STRING ? VPD_BASE : VPD_BASE_OLD; ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd); if (ret < 0) |