summaryrefslogtreecommitdiff
path: root/drivers/net/enic/vnic_dev.c
diff options
context:
space:
mode:
authorScott Feldman <scofeldm@cisco.com>2010-05-17 22:50:19 -0700
committerDavid S. Miller <davem@davemloft.net>2010-05-17 22:50:19 -0700
commitf8bd909183acffad68780b10c1cdf36161cfd5d1 (patch)
treeaefec6e6f1e67e93bc1b2ec223f974a4cd34f00f /drivers/net/enic/vnic_dev.c
parent57b610805ce92dbd79fc97509f80fa5391b99623 (diff)
net: Add ndo_{set|get}_vf_port support for enic dynamic vnics
Add enic ndo_{set|get}_vf_port ops to support setting/getting port-profile for enic dynamic devices. Enic dynamic devices are just like normal enic eth devices except dynamic enics require an extra configuration step to assign a port-profile identifier to the interface before the interface is useable. Once a port-profile is assigned, link comes up on the interface and is ready for I/O. The port-profile is used to configure the network port assigned to the interface. The network port configuration includes VLAN membership, QoS policies, and port security settings typical of a data center network. A dynamic enic initially has a zero-mac address. Before a port-profile is assigned, a valid non-zero unicast mac address should be assign to the dynamic enic interface. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Diffstat (limited to 'drivers/net/enic/vnic_dev.c')
-rw-r--r--drivers/net/enic/vnic_dev.c58
1 files changed, 56 insertions, 2 deletions
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index d43a9d43bbff..2b3e16db5c82 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -530,7 +530,7 @@ void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
printk(KERN_ERR "Can't set packet filter\n");
}
-void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr)
+int vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr)
{
u64 a0 = 0, a1 = 0;
int wait = 1000;
@@ -543,9 +543,11 @@ void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr)
err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait);
if (err)
printk(KERN_ERR "Can't add addr [%pM], %d\n", addr, err);
+
+ return err;
}
-void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr)
+int vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr)
{
u64 a0 = 0, a1 = 0;
int wait = 1000;
@@ -558,6 +560,8 @@ void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr)
err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait);
if (err)
printk(KERN_ERR "Can't del addr [%pM], %d\n", addr, err);
+
+ return err;
}
int vnic_dev_raise_intr(struct vnic_dev *vdev, u16 intr)
@@ -682,6 +686,56 @@ int vnic_dev_init(struct vnic_dev *vdev, int arg)
return r;
}
+int vnic_dev_init_done(struct vnic_dev *vdev, int *done, int *err)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int ret;
+
+ *done = 0;
+
+ ret = vnic_dev_cmd(vdev, CMD_INIT_STATUS, &a0, &a1, wait);
+ if (ret)
+ return ret;
+
+ *done = (a0 == 0);
+
+ *err = (a0 == 0) ? a1 : 0;
+
+ return 0;
+}
+
+int vnic_dev_init_prov(struct vnic_dev *vdev, u8 *buf, u32 len)
+{
+ u64 a0, a1 = len;
+ int wait = 1000;
+ u64 prov_pa;
+ void *prov_buf;
+ int ret;
+
+ prov_buf = pci_alloc_consistent(vdev->pdev, len, &prov_pa);
+ if (!prov_buf)
+ return -ENOMEM;
+
+ memcpy(prov_buf, buf, len);
+
+ a0 = prov_pa;
+
+ ret = vnic_dev_cmd(vdev, CMD_INIT_PROV_INFO, &a0, &a1, wait);
+
+ pci_free_consistent(vdev->pdev, len, prov_buf, prov_pa);
+
+ return ret;
+}
+
+int vnic_dev_deinit(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+
+ return vnic_dev_cmd(vdev, CMD_DEINIT, &a0, &a1, wait);
+}
+
int vnic_dev_link_status(struct vnic_dev *vdev)
{
if (vdev->linkstatus)