Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) MLX5 bug fixes from Saeed Mahameed et al:
     - released wrong resources when firmware timeout happens
     - fix wrong check for encapsulation size limits
     - UAR memory leak
     - ETHTOOL_GRXCLSRLALL failed to fill in info->data

 2) Don't cache l3mdev on mis-matches local route, causes net devices to
    leak refs. From Robert Shearman.

 3) Handle fragmented SKBs properly in macsec driver, the problem is
    that we were mis-sizing the sgvec table. From Jason A. Donenfeld.

 4) We cannot have checksum offload enabled for inner UDP tunneled
    packet during IPSEC, from Ansis Atteka.

 5) Fix double SKB free in ravb driver, from Dan Carpenter.

 6) Fix CPU port handling in b53 DSA driver, from Florian Dainelli.

 7) Don't use on-stack buffers for usb_control_msg() in CAN usb driver,
    from Maksim Salau.

 8) Fix device leak in macvlan driver, from Herbert Xu. We have to purge
    the broadcast queue properly on port destroy.

 9) Fix tx ring entry limit on EF10 devices in sfc driver. From Bert
    Kenward.

10) Fix memory leaks in team driver, from Pan Bian.

11) Don't setup ipv6_stub before it can be actually used, from Paolo
    Abeni.

12) Fix tipc socket flow control accounting, from Parthasarathy
    Bhuvaragan.

13) Fix crash on module unload in hso driver, from Andreas Kemnade.

14) Fix purging of bridge multicast entries, the problem is that if we
    don't defer it to ndo_uninit it's possible for new entries to get
    added after we purge. Fix from Xin Long.

15) Don't return garbage for PACKET_HDRLEN getsockopt, from Alexander
    Potapenko.

16) Fix autoneg stall properly in PHY layer, and revert micrel driver
    change that was papering over it. From Alexander Kochetkov.

17) Don't dereference an ipv4 route as an ipv6 one in the ip6_tunnnel
    code, from Cong Wang.

18) Clear out the congestion control private of the TCP socket in all of
    the right places, from Wei Wang.

19) rawv6_ioctl measures SKB length incorrectly, fix from Jamie
    Bainbridge.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  ipv6: check raw payload size correctly in ioctl
  tcp: memset ca_priv data to 0 properly
  ipv6: check skb->protocol before lookup for nexthop
  net: core: Prevent from dereferencing null pointer when releasing SKB
  macsec: dynamically allocate space for sglist
  Revert "phy: micrel: Disable auto negotiation on startup"
  net: phy: fix auto-negotiation stall due to unavailable interrupt
  net/packet: check length in getsockopt() called with PACKET_HDRLEN
  net: ipv6: regenerate host route if moved to gc list
  bridge: move bridge multicast cleanup to ndo_uninit
  ipv6: fix source routing
  qed: Fix error in the dcbx app meta data initialization.
  netvsc: fix calculation of available send sections
  net: hso: fix module unloading
  tipc: fix socket flow control accounting error at tipc_recv_stream
  tipc: fix socket flow control accounting error at tipc_send_stream
  ipv6: move stub initialization after ipv6 setup completion
  team: fix memory leaks
  sfc: tx ring can only have 2048 entries for all EF10 NICs
  macvlan: Fix device ref leak when purging bc_queue
  ...

1 files changed, 72 insertions, 0 deletions

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 304732550f0a..528d3bb4917f 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -1061,6 +1061,78 @@ const struct peak_usb_adapter pcan_usb_fd = {
 	.do_get_berr_counter = pcan_usb_fd_get_berr_counter,
 };
 
+/* describes the PCAN-CHIP USB */
+static const struct can_bittiming_const pcan_usb_chip_const = {
+	.name = "pcan_chip_usb",
+	.tseg1_min = 1,
+	.tseg1_max = (1 << PUCAN_TSLOW_TSGEG1_BITS),
+	.tseg2_min = 1,
+	.tseg2_max = (1 << PUCAN_TSLOW_TSGEG2_BITS),
+	.sjw_max = (1 << PUCAN_TSLOW_SJW_BITS),
+	.brp_min = 1,
+	.brp_max = (1 << PUCAN_TSLOW_BRP_BITS),
+	.brp_inc = 1,
+};
+
+static const struct can_bittiming_const pcan_usb_chip_data_const = {
+	.name = "pcan_chip_usb",
+	.tseg1_min = 1,
+	.tseg1_max = (1 << PUCAN_TFAST_TSGEG1_BITS),
+	.tseg2_min = 1,
+	.tseg2_max = (1 << PUCAN_TFAST_TSGEG2_BITS),
+	.sjw_max = (1 << PUCAN_TFAST_SJW_BITS),
+	.brp_min = 1,
+	.brp_max = (1 << PUCAN_TFAST_BRP_BITS),
+	.brp_inc = 1,
+};
+
+const struct peak_usb_adapter pcan_usb_chip = {
+	.name = "PCAN-Chip USB",
+	.device_id = PCAN_USBCHIP_PRODUCT_ID,
+	.ctrl_count = PCAN_USBFD_CHANNEL_COUNT,
+	.ctrlmode_supported = CAN_CTRLMODE_FD |
+		CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY,
+	.clock = {
+		.freq = PCAN_UFD_CRYSTAL_HZ,
+	},
+	.bittiming_const = &pcan_usb_chip_const,
+	.data_bittiming_const = &pcan_usb_chip_data_const,
+
+	/* size of device private data */
+	.sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
+
+	/* timestamps usage */
+	.ts_used_bits = 32,
+	.ts_period = 1000000, /* calibration period in ts. */
+	.us_per_ts_scale = 1, /* us = (ts * scale) >> shift */
+	.us_per_ts_shift = 0,
+
+	/* give here messages in/out endpoints */
+	.ep_msg_in = PCAN_USBPRO_EP_MSGIN,
+	.ep_msg_out = {PCAN_USBPRO_EP_MSGOUT_0},
+
+	/* size of rx/tx usb buffers */
+	.rx_buffer_size = PCAN_UFD_RX_BUFFER_SIZE,
+	.tx_buffer_size = PCAN_UFD_TX_BUFFER_SIZE,
+
+	/* device callbacks */
+	.intf_probe = pcan_usb_pro_probe,	/* same as PCAN-USB Pro */
+	.dev_init = pcan_usb_fd_init,
+
+	.dev_exit = pcan_usb_fd_exit,
+	.dev_free = pcan_usb_fd_free,
+	.dev_set_bus = pcan_usb_fd_set_bus,
+	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
+	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
+	.dev_decode_buf = pcan_usb_fd_decode_buf,
+	.dev_start = pcan_usb_fd_start,
+	.dev_stop = pcan_usb_fd_stop,
+	.dev_restart_async = pcan_usb_fd_restart_async,
+	.dev_encode_msg = pcan_usb_fd_encode_msg,
+
+	.do_get_berr_counter = pcan_usb_fd_get_berr_counter,
+};
+
 /* describes the PCAN-USB Pro FD adapter */
 static const struct can_bittiming_const pcan_usb_pro_fd_const = {
 	.name = "pcan_usb_pro_fd",