Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

1 files changed, 77 insertions, 16 deletions

diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index c514740f9a83..5939dff253c2 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -12,14 +12,47 @@
 #include <linux/sizes.h>
 #include "sm_common.h"
 
-static struct nand_ecclayout nand_oob_sm = {
-	.eccbytes = 6,
-	.eccpos = {8, 9, 10, 13, 14, 15},
-	.oobfree = {
-		{.offset = 0 , .length = 4}, /* reserved */
-		{.offset = 6 , .length = 2}, /* LBA1 */
-		{.offset = 11, .length = 2}  /* LBA2 */
+static int oob_sm_ooblayout_ecc(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	oobregion->length = 3;
+	oobregion->offset = ((section + 1) * 8) - 3;
+
+	return 0;
+}
+
+static int oob_sm_ooblayout_free(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	switch (section) {
+	case 0:
+		/* reserved */
+		oobregion->offset = 0;
+		oobregion->length = 4;
+		break;
+	case 1:
+		/* LBA1 */
+		oobregion->offset = 6;
+		oobregion->length = 2;
+		break;
+	case 2:
+		/* LBA2 */
+		oobregion->offset = 11;
+		oobregion->length = 2;
+		break;
+	default:
+		return -ERANGE;
 	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_ops = {
+	.ecc = oob_sm_ooblayout_ecc,
+	.free = oob_sm_ooblayout_free,
 };
 
 /* NOTE: This layout is is not compatabable with SmartMedia, */
@@ -28,15 +61,43 @@ static struct nand_ecclayout nand_oob_sm = {
 /* If you use smftl, it will bypass this and work correctly */
 /* If you not, then you break SmartMedia compliance anyway */
 
-static struct nand_ecclayout nand_oob_sm_small = {
-	.eccbytes = 3,
-	.eccpos = {0, 1, 2},
-	.oobfree = {
-		{.offset = 3 , .length = 2}, /* reserved */
-		{.offset = 6 , .length = 2}, /* LBA1 */
+static int oob_sm_small_ooblayout_ecc(struct mtd_info *mtd, int section,
+				      struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = 3;
+	oobregion->offset = 0;
+
+	return 0;
+}
+
+static int oob_sm_small_ooblayout_free(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *oobregion)
+{
+	switch (section) {
+	case 0:
+		/* reserved */
+		oobregion->offset = 3;
+		oobregion->length = 2;
+		break;
+	case 1:
+		/* LBA1 */
+		oobregion->offset = 6;
+		oobregion->length = 2;
+		break;
+	default:
+		return -ERANGE;
 	}
-};
 
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_small_ops = {
+	.ecc = oob_sm_small_ooblayout_ecc,
+	.free = oob_sm_small_ooblayout_free,
+};
 
 static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
@@ -121,9 +182,9 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
 
 	/* ECC layout */
 	if (mtd->writesize == SM_SECTOR_SIZE)
-		chip->ecc.layout = &nand_oob_sm;
+		mtd_set_ooblayout(mtd, &oob_sm_ops);
 	else if (mtd->writesize == SM_SMALL_PAGE)
-		chip->ecc.layout = &nand_oob_sm_small;
+		mtd_set_ooblayout(mtd, &oob_sm_small_ops);
 	else
 		return -ENODEV;